An innovative approach of priming lignocellulosics with lytic polysaccharide mono-oxygenases prior to saccharification with glycosyl hydrolases can economize second generation ethanol process

Heterologous Expression and Biochemical Characterization of a Novel Lytic Polysaccharide Monooxygenase from Chitinilyticum aquatile CSC-1

Lytic polysaccharide monooxygenases (LPMOs) are copper-dependent enzymes that catalyze the oxidative cleavage of recalcitrant polysaccharides. There are limited reports on LPMOs capable of concurrently catalyzing the oxidative cleavage of both cellulose and chitin. In this study, we identified and cloned a novel LPMO from the newly isolated bacterium Chitinilyticum aquatile CSC-1, designated as CaLPMO10. When using 2, 6-dimethylphenol (2, 6-DMP) as the substrate, CaLPMO10 exhibited optimal activity at 50 °C and pH 8, demonstrating good temperature stability at 30 °C. Even after a 6 h incubation at pH 8 and 30 °C, CaLPMO10 retained approximately 83.03 ± 1.25% residual enzyme activity. Most metal ions were found to enhance the enzyme activity of CaLPMO10, with ascorbic acid identified as the optimal reducing agent. Mass spectrometry analysis indicated that CaLPMO10 displayed oxidative activity towards both chitin and cellulose, identifying it as a C1/C4-oxidized LPMO. CaLPMO10 shows promise as a key enzyme for the efficient utilization of biomass resources in future applications.

Genome and secretome insights: unravelling the lignocellulolytic potential of Myceliophthora verrucosa for enhanced hydrolysis of lignocellulosic biomass

Lignocellulolytic enzymes from a novel Myceliophthora verrucosa (5DR) strain was found to potentiate the efficacy of benchmark cellulase during saccharification of acid/alkali treated bagasse by ~ 2.24 fold, indicating it to be an important source of auxiliary enzymes. The De-novo sequencing and analysis of M. verrucosa genome (31.7 Mb) revealed to encode for 7989 putative genes, representing a wide array of CAZymes (366) with a high proportions of auxiliary activity (AA) genes (76). The LC/MS QTOF based secretome analysis of M. verrucosa showed high abundance of glycosyl hydrolases and AA proteins with cellobiose dehydrogenase (CDH) (AA8), being the most prominent auxiliary protein. A gene coding for lytic polysaccharide monooxygenase (LPMO) was expressed in Pichia pastoris and CDH produced by M. verrucosa culture on rice straw based solidified medium were purified and characterized. The mass spectrometry of LPMO catalyzed hydrolytic products of avicel showed the release of both C1/C4 oxidized products, indicating it to be type-3. The lignocellulolytic cocktail comprising of in-house cellulase produced by Aspergillus allahabadii strain spiked with LPMO & CDH exhibited enhanced and better hydrolysis of mild alkali deacetylated (MAD) and unwashed acid pretreated rice straw slurry (UWAP), when compared to Cellic CTec3 at high substrate loading rate.

Efficient Secretory Production of Lytic Polysaccharide Monooxygenase BaLPMO10 and Its Application in Plant Biomass Conversion

Lytic polysaccharide monooxygenases (LPMOs) can oxidatively break the glycosidic bonds of crystalline cellulose, providing more actionable sites for cellulase to facilitate the conversion of cellulose to cello-oligosaccharides, cellobiose and glucose. In this work, a bioinformatics analysis of BaLPMO10 revealed that it is a hydrophobic, stable and secreted protein. By optimizing the fermentation conditions, the highest protein secretion level was found at a IPTG concentration of 0.5 mM and 20 h of fermentation at 37 °C, with a yield of 20 mg/L and purity > 95%. The effect of metal ions on the enzyme activity of BaLPMO10 was measured, and it was found that 10 mM Ca²⁺ and Na⁺ increased the enzyme activity by 47.8% and 98.0%, respectively. However, DTT, EDTA and five organic reagents inhibited the enzyme activity of BaLPMO10. Finally, BaLPMO10 was applied in biomass conversion. The degradation of corn stover pretreated with different steam explosions was performed. BaLPMO10 and cellulase had the best synergistic degradation effect on corn stover pretreated at 200 °C for 12 min, improving reducing sugars by 9.2% compared to cellulase alone. BaLPMO10 was found to be the most efficient for ethylenediamine-pretreated Caragana korshinskii by degrading three different biomasses, increasing the content of reducing sugars by 40.5% compared to cellulase alone following co-degradation with cellulase for 48 h. The results of scanning electron microscopy revealed that BaLPMO10 disrupted the structure of Caragana korshinskii, making its surface coarse and poriferous, which increased the accessibility of other enzymes and thus promoted the process of conversion. These findings provide guidance for improving the efficiency of enzymatic digestion of lignocellulosic biomass.

Construction and characterization of a Myceliophthora thermophila lytic polysaccharide monooxygenase mutant S174C/A93C with improved thermostability

Lytic polysaccharide monooxygenases (LPMOs) can oxidatively cleave the glycosidic bonds of crystalline polysaccharides, providing more accessible sites for polysaccharide hydrolases and promoting efficient conversion of biomass. In order to promote industrial applications of LPMOs, the stability of an LPMO of Myceliophthora thermophila C1 (MtC1LPMO) was improved by adding disulfide bonds in this study. Firstly, the structural changes of wild-type (WT) MtC1LPMO at different temperatures were explored using molecular dynamics simulations, and eight mutants were selected by combining the predicted results from Disulfide by Design (DBD), Multi agent stability prediction upon point mutations (Maestro) and Bridge disulfide (BridgeD) websites. Then, the enzymatic properties of the different mutants were determined after their expression and purification, and the mutant S174C/A93C with the highest thermal stability was obtained. The specific activities of unheated S174C/A93C and WT were 160.6 ± 1.7 U/g and 174.8 ± 7.5 U/g, respectively, while those of S174C/A93C and WT treated at 70 °C for 4 h were 77.7 ± 3.4 U/g and 46.1 ± 0.4 U/g, respectively. The transition midpoint temperature of S174C/A93C was 2.7 °C higher than that of WT. The conversion efficiency of S174C/A93C for both microcrystalline cellulose and corn straw was about 1.5 times higher than that of WT. Finally, molecular dynamics simulations revealed that the introduction of disulfide bonds increased the β-sheet content of the H1-E34 region, thus improving the rigidity of the protein. Therefore, the overall structural stability of S174C/A93C was improved, which in turn improved its thermal stability.

Lytic polysaccharide monooxygenase - A new driving force for lignocellulosic biomass degradation

Lytic polysaccharide monooxygenases (LPMOs) can catalyze polysaccharides by oxidative cleavage of glycosidic bonds and have catalytic activity for cellulose, hemicellulose, chitin, starch and pectin, thus playing an important role in the biomass conversion of lignocellulose. The catalytic substrates of LPMOs are different and the specific catalytic mechanism has not been fully elucidated. Although there have been many studies related to LPMOs, few have actually been put into industrial biomass conversion, which poses a challenge for their expression, regulation and application. In this review, the origin, substrate specificity, structural features, and the relationship between structure and function of LPMOs are described. Additionally, the catalytic mechanism and electron donor of LPMOs and their heterologous expression and regulation are discussed. Finally, the synergistic degradation of biomass by LPMOs with other polysaccharide hydrolases is reviewed, and their current problems and future research directions are pointed out.

Heterologous expression and characterization of a novel lytic polysaccharide monooxygenase from Natrialbaceae archaeon and its application for chitin biodegradation

Lytic polysaccharide monooxygenases could enhance the enzymatic conversion of recalcitrant polysaccharides by glycoside hydrolases. This study reports the expression and identification of a novel AA10 LPMO from Natrialbaceae archaeon, named NaLPMO10A, as a C1 oxidizer of chitin. The optimal temperature and pH for NaLPMO10A activity were 40 °C and 9.0, respectively, and NaLPMO10A exhibited high thermostability and pH stability under alkaline conditions. NaLPMO10A was also highly tolerant and stable when treated with high concentration of metal ions (1 M). Moreover, metal ions (Na⁺, K⁺, Ca²⁺ and Mg²⁺) significantly promoted NaLPMO10A activity and improved the saccharification efficiency of chitin by 22.6%, 45.9%, 36.7% and 53.9%, respectively, compared to commercial chitinase alone. Together, the findings of this study fill a gap in archaeal LPMO research, and for the first time demonstrate that archaeal NaLPMO10A could be a promising enzyme for improving saccharification under extreme condition, with potential applications in biorefineries.

Expression and characterization of a novel lytic polysaccharide monooxygenase, PdLPMO9A, from the edible fungus Pleurotus djamor and its synergistic interactions with cellulase in corn straw biomass saccharification

Lytic polysaccharide monooxygenases play a unique role in biomass saccharification. A novel gene, PdLPMO9A, from Pleurotus djamor, was reported to be upregulated during the degradation of corn straw in our previous research. However, very little information is available on PdLPMO9A. Therefore, PdLPMO9A was heterologously expressed in Pichia pastoris, and biophysical characterisitics of the recombinant protein PdLPMO9A were investigated; it was shown to have superior thermostability and pH stability. PdLPMO9A markedly improved the cellulase-mediated saccharification of corn straw, when the dosage of PdLPMO9A was 0.66 mg/g corn straw and hydrolysis time was 48 h. When CuSO₄ was added at a concentration of 0.1 mM, glucose yield rose by a further 28.16%. In light of these findings, it was concluded that PdLPMO9A has the potential to function as an essential component of a cellulase cocktail capable of ensuring the saccharification of corn straw biomass.

Heterologous expression of bacterial CotA-laccase, characterization and its application for biodegradation of malachite green

Malachite green (MG) is used as fungicide/parasiticide in aquaculture, its persistence is detrimental as it exhibits carcinogenic effects to aquatic organisms. Bacterial laccase evaluated as the best enzyme at extreme condition for aquatic MG removal. Study aims to increase laccase concentration, CotA-laccase from Bacillus subtilis was cloned and overexpressed in Escherichia coli. Optimal catalysis for purified CotA-laccase were at pH 5.0, 60 °C, and 1 mM of (2,2-azino-di-[3-ethylbenzothiazoline-sulphonate-(6)]) with Km and Kcat 0.087 mM and 37.64 S^-1 respectively. MG biodegradation by CotA-laccase in clam and tilapia pond wastewaters and cytotoxic effect of biodegraded products in grouper fin-1 cells were determined. MG degradation by CotA-laccase was equally efficient, exhibiting upto 90-94% decolorization at freshwater and saline conditions and treated solution was non-toxic to GF-1 cells. Thus, recombinant-CotA-laccase could be an environmentally-friendly enzyme for aquaculture to remove MG, thereby effective to reduce its accumulation in aquatic organisms and ensuring safe aquaculture products.

Economizing the lignocellulosic hydrolysis process using heterologously expressed auxiliary enzymes feruloyl esterase D (CE1) and β-xylosidase (GH43) derived from thermophilic fungi Scytalidium thermophilum

Two lignocellulolytic accessory enzymes, feruloyl esterase D (FAED_SCYTH) and β-xylosidase (XYL43B_SCYTH) were cloned and produced in the Pichia pastoris X33 as host. The molecular weight of recombinant enzymes FAED_SCYTH and XYL43B_SCYTH were ~ 31 and 40 kDa, respectively. FAED_SCYTH showed optimal activity at pH 6.0, 60 °C; and XYL43B_SCYTH at pH 7.0, 50 °C. FAED_SCYTH and XYL43B_SCYTH exhibited t_1/2: 4 and 0.5 h, respectively (50 °C, pH 5.0). The β-xylosidase was bi-functional with pronounced activity against pNP-α-arabinofuranoside besides being highly xylose tolerant (retaining ~ 97% activity in the presence of 700 mM xylose). Cocktails prepared using these enzymes along with AA9 protein (PMO9D_SCYTH) and commercial cellulase CellicCTec2, showed improved hydrolysis of the pre-treated lignocellulosic biomass. Priming of pre-treated lignocellulosic biomass with these accessory enzymes was found to further enhance the hydrolytic potential of CellicCTec2 promising to reduce the enzyme load and cost required for obtaining sugars from biorefinery relevant pre-treated substrates.

Role and significance of lytic polysaccharide monooxygenases (LPMOs) in lignocellulose deconstruction

Lytic polysaccharide monooxygenases (LPMOs) emerged a decade ago and have been described as biomass deconstruction boosters as they play an extremely important role in unravelling the enzymatic biomass hydrolysis scheme. These are oxidative enzymes requiring partners to donate electrons during catalytic action on cellulose backbone. Commercial cellulase preparations are mostly from the robust fungal sources, hence LPMOs from fungi (AA9) have been discussed. Characterisation of LPMOs suffers due to multiple complications which has been discussed and challenges in detection of LPMOs in secretomes has also been highlighted. This review focuses on the significance of LPMOs on biomass hydrolysis due to which it has become a key component of cellulolytic cocktail available commercially for biomass deconstruction and its routine analysis challenge has also been discussed. It has also outlined a few key points that help in expressing catalytic active recombinant AA9 LPMOs.

Advanced Bioethanol Production: From Novel Raw Materials to Integrated Biorefineries

The production of so-called advanced bioethanol offers several advantages compared to traditional bioethanol production processes in terms of sustainability criteria. This includes, for instance, the use of nonfood crops or residual biomass as raw material and a higher potential for reducing greenhouse gas emissions. The present review focuses on the recent progress related to the production of advanced bioethanol, (i) highlighting current results from using novel biomass sources such as the organic fraction of municipal solid waste and certain industrial residues (e.g., residues from the paper, food, and beverage industries); (ii) describing new developments in pretreatment technologies for the fractionation and conversion of lignocellulosic biomass, such as the bioextrusion process or the use of novel ionic liquids; (iii) listing the use of new enzyme catalysts and microbial strains during saccharification and fermentation processes. Furthermore, the most promising biorefinery approaches that will contribute to the cost-competitiveness of advanced bioethanol production processes are also discussed, focusing on innovative technologies and applications that can contribute to achieve a more sustainable and effective utilization of all biomass fractions. Special attention is given to integrated strategies such as lignocellulose-based biorefineries for the simultaneous production of bioethanol and other high added value bioproducts.

Transcriptome Profiling-Based Analysis of Carbohydrate-Active Enzymes in Aspergillus terreus Involved in Plant Biomass Degradation

Given the global abundance of plant biomass residues, potential exists in biorefinery-based applications with lignocellulolytic fungi. Frequently isolated from agricultural cellulosic materials, Aspergillus terreus is a fungus efficient in secretion of commercial enzymes such as cellulases, xylanases and phytases. In the context of biomass saccharification, lignocellulolytic enzyme secretion was analyzed in a strain of A. terreus following liquid culture with sugarcane bagasse (SB) (1% w/v) and soybean hulls (SH) (1% w/v) as sole carbon source, in comparison to glucose (G) (1% w/v). Analysis of the fungal secretome revealed a maximum of 1.017 UI.mL^–1 xylanases after growth in minimal medium with SB, and 1.019 UI.mL^–1 after incubation with SH as carbon source. The fungal transcriptome was characterized on SB and SH, with gene expression examined in comparison to equivalent growth on G as carbon source. Over 8000 genes were identified, including numerous encoding enzymes and transcription factors involved in the degradation of the plant cell wall, with significant expression modulation according to carbon source. Eighty-nine carbohydrate-active enzyme (CAZyme)-encoding genes were identified following growth on SB, of which 77 were differentially expressed. These comprised 78% glycoside hydrolases, 8% carbohydrate esterases, 2.5% polysaccharide lyases, and 11.5% auxiliary activities. Analysis of the glycoside hydrolase family revealed significant up-regulation for genes encoding 25 different GH family proteins, with predominance for families GH3, 5, 7, 10, and 43. For SH, from a total of 91 CAZyme-encoding genes, 83 were also significantly up-regulated in comparison to G. These comprised 80% glycoside hydrolases, 7% carbohydrate esterases, 5% polysaccharide lyases, 7% auxiliary activities (AA), and 1% glycosyltransferases. Similarly, within the glycoside hydrolases, significant up-regulation was observed for genes encoding 26 different GH family proteins, with predominance again for families GH3, 5, 10, 31, and 43. A. terreus is a promising species for production of enzymes involved in the degradation of plant biomass. Given that this fungus is also able to produce thermophilic enzymes, this first global analysis of the transcriptome following cultivation on lignocellulosic carbon sources offers considerable potential for the application of candidate genes in biorefinery applications.