Nanoscale Pisum sativum pods biochar encapsulated starch hydrogel: A novel nanosorbent for efficient chromium (VI) ions and naproxen drug removal

Starch-based hydrogels for environmental applications: A review

Water sources have become extremely scarce and contaminated by organic and inorganic industrial and agricultural pollutants as well as household wastes. Poisoning water resources by dyes and metals is a problem because contaminated water can leak into subsurface and surface sources, causing serious contamination and health problems. Therefore, developing wastewater treatment technologies is valuable. Today, hydrogels have attracted considerable attention owing to their broad applications. Hydrogels are polymeric network compositions with significant water-imbibing capacity. Hydrogels have potential applications in diverse fields such as biomedical, personal care products, pharmaceuticals, cosmetics, and biosensors. They can be prepared by using natural (biopolymers) and synthetic polymers. Synthetic polymer-based hydrogels obtained from petrochemicals are not environmentally benign; thus, abundant plant-based polysaccharides are found as more suitable compounds for making biodegradable hydrogels. Polysaccharides with many advantages such as non-toxicity, biodegradability, availability, inexpensiveness, etc. are widely employed for the preparation of environmentally friendly hydrogels. Polysaccharides-based hydrogels containing chitin, chitosan, gum, starch (St), etc. are employed to remove pollutants, metals, and dyes. Among these, St has attracted a lot of attention. St can be mixed with other compounds to make hydrogels, which remove dyes and metal ions to variable degrees of efficiency. Although St has numerous advantages, it suffers from drawbacks such as low stability, low water solubility, and fast degradability in water which limit its application as an environmental adsorbent. As an effective way to overcome these weaknesses, various modification approaches to form starch-based hydrogels (SBHs) employing different compounds have been reported. The preparation methods and applications of SBH adsorbents in organic dyes, hazardous materials, and toxic ions elimination from water resources have been comprehensively discussed in this review.

Efficient reduction of vanadium (V) with biochar and experimental parameters optimized by response surface methodology

Water pollution deteriorates ecosystems and has a great threaten to the environment. The environmental benefits of wastewater treatment are extremely important to minimize pollutants. Here, the biochar purchased from the related industry was used to treat the wastewater which contained high concentration of vanadium (V). The concentration of vanadium was measured by the IC-OES and the results showed that 96.1% vanadium (V) was reduced at selected reaction conditions: the mass ratio of biochar to vanadium of 5.4, reaction temperature of 90 °C, reaction time at 60 min and concentration of H2SO4 of 10 g/L, respectively. Response surface methodology confirmed that all the experimental parameters had positive effect on the reduction of vanadium (V), which could improve the reduction efficiency of vanadium (V) as increased. The influence of each parameter on the reduction process followed the order: A (Concentration of H2SO4) > C (mass ratio of biochar to vanadium) > B (mass ratio of biochar to vanadium). Especially, the mass ratio of biochar to vanadium and concentration of H2SO4 had the greatest influence on the reduction process. This paper provides a versatile strategy for the treatment of wastewater containing vanadium (V) and shows a bright tomorrow for wastewater treatment.

Chitosan and silica nanoparticles-modified xanthan gum-derived bio-nanocomposite hydrogel film for efficient uptake of methyl orange acidic dye

In this contribution, a bio-nanocomposite hydrogel film (CS/XG.SiO2) of chitosan/silica NPs-modified xanthan gum was prepared via a facile solution casting blending approach and utilized to capture the anionic methyl orange (MO) from aqueous solution. A Taguchi standard method was used to optimize the hydrogel nanocomposite synthesis reaction conditions after comprehensive characterization using various techniques. Under various operating parameters, the hydrogel biofilm was tested for its effectiveness in adsorbing MO dye in a batch process. In agreement with Langmuir isotherm, the CS/XG.SiO2 biofilm was capable of adsorbing MO at a maximum capacity of 294 mg/g at pH 5.30, contact time 45 min, temperature 25 °C, and concentration (C0) 50 mg/L. Pseudo-second-order model and adsorption kinetics data well matched. The thermodynamic data indicate that adsorption occurred spontaneously and exothermically. The main mechanisms driving the adsorption are electrostatic interactions and hydrogen bonding between the CS/XG.SiO2 nanocomposite and the dye. Furthermore, the biofilm is regenerative, allowing for up to five reuses while maintaining a 75 % dye removal efficiency. This study highlights that the CS/XG.SiO2 hydrogel nanocomposite is an inexpensive, reusable, and eco-friendly bio-adsorbent that is capable of anionic dye adsorption.

Functionalizing natural polymers to develop green adsorbents for wastewater treatment applications

The present study provides an overview of scientific developments made in the last decade in the field of green adsorbents focusing on the modifications in natural polymers and their applications such as, wastewater treatment, and ion exchange. For this purpose, an introduction to the various methods of modifying natural polymers is first given, and then the properties, application, and future priorities of green adsorbents are also discussed. Methods of modification of natural polymers under homogeneous and heterogeneous conditions using modifiers with different properties are also described. Various methods for modifying natural polymers and the use of the obtained green adsorbents are reviewed. A comparison of the sorption properties of green adsorbents based on natural polymers and other adsorbents used in industry has also been carried out. With the participation of green adsorbents based on natural polymers, the properties of treated wastewaters having toxic metal ions, organic dyes, petroleum products, and other harmful compounds was analyzed. Future perspectives on green adsorbents based on natural polymers are as also highlighted.

Occurrence, toxicity, impact and removal of selected non-steroidal anti-inflammatory drugs (NSAIDs): A review

Non-steroidal anti-inflammatory drugs (NSAIDs) are among the most frequently used pharmaceuticals for human therapy, pet therapeutics, and veterinary feeds, enabling them to enter into water sources such as wastewater, soil and sediment, and seawater. The control of NSAIDs has led to the advent of the novel materials for treatment techniques. Herein, we review the occurrence, impact and toxicity of NSAIDs against aquatic microorganisms, plants and humans. Typical NSAIDs, e.g., ibuprofen, ketoprofen, diclofenac, naproxen and aspirin were detected at high concentrations in wastewater up to 2,747,000 ng L-1. NSAIDs in water could cause genotoxicity, endocrine disruption, locomotive disorders, body deformations, organs damage, and photosynthetic corruption. Considering treatment methods, among adsorbents for removal of NSAIDs from water, metal-organic frameworks (10.7-638 mg g-1) and advanced porous carbons (7.4-400 mg g-1) were the most robust. Therefore, these carbon-based adsorbents showed promise in efficiency for the treatment of NSAIDs.

Biogenic adsorbents for removal of drugs and dyes: A comprehensive review on properties, modification and applications

This comprehensive review explores the potential and versatility of biogenic materials as sustainable and environmentally benign alternatives to conventional adsorbents for the removal of drugs and dyes. Biogenic adsorbents derived from plants, animals, microorganisms, algae and biopolymers have bioactive compounds that interact with functional groups of pollutants, resulting in their binding with the sorbent. These materials can be modified mechanically, thermally and chemically to enhance their adsorption properties. Biogenic hybrid composites, which integrate the characteristics of more than one material, have also been fabricated. Additionally, microorganisms and algae are analyzed for their ability to uptake pollutants. Various influential factors that contribute to the adsorption process are also discussed. The challenge, limitations and future prospects for research are reviewed and bridging gap between large scale application and laboratory scale. This comprehensive review, involves a combination of various biogenic adsorbents, going beyond the existing literature where typically only specific adsorbents are reported. The review also covers the isotherms, kinetics, and desorption studies of biogenic adsorbents, providing an improved framework for their effective use in removing pharmaceuticals and dyes from wastewater.

A novel biochar-based composite hydrogel for removing heavy metals in water and alleviating cadmium stress in tobacco seedlings

A novel composite hydrogel (AM/CMC/B) synthesized from peanut shell biochar effectively adsorbs heavy metal Cd in water and reduces its toxicity to tobacco seedlings. The hydrogel, prepared via hydrothermal polymerization using acrylamide (AM), carboxymethyl cellulose (CMC), and peanut shell biochar (B), exhibited a maximum adsorption capacity of 164.83 mg g-1 for Cd2+ and followed a pseudo-second-order kinetic model. In pot experiments, the application of exogenous AM/CMC/B mitigated the inhibitory effects of Cd-contaminated soil on tobacco seedling growth. Addition of 10 mg kg-1 Cd resulted in improved phenotype, root system development, enhanced photosynthetic capacity, stomatal conductance (Gs), stomatal number, and increased antioxidant activity while reducing MDA content and leaf cell death. These findings highlight the potential of AM/CMC/B as an environmentally friendly adsorbent for Cd removal from water and for reducing Cd stress toxicity in tobacco and other plants.

Synthesis of magnetic sodium lignosulfonate hydrogel(Fe3O4@LS) and its adsorption behavior for Cd2+ in wastewater

Heavy metal pollution is becoming increasingly serious. Heavy metal pollutants are nonbiodegradable and can be bioenriched through the food chain, and thus, they greatly threaten the environment and human health. Hydrogels, as an ideal adsorbent, have been widely used to treat heavy metal industrial wastewater. Sodium lignosulfonate hydrogel (LS) was prepared by free-radical grafting copolymerization, and nano-Fe3O4 particles were loaded in LS by an in-situ precipitation method (Fe3O4@LS). The magnetic properties and adsorption capacity of Fe3O4@LS are closely related to the load capacity of Fe3O4. XRD, FTIR, XPS, SEM, TEM, BET, and TGA analyses of the materials were performed. Subsequently, the removal effect of the typical pollutant Cd2+ in heavy metal-polluted water was studied with Fe3O4@LS as the adsorbent. The influences of the Fe3O4@LS dosage and initial pH were investigated, and the adsorption kinetics and thermodynamics were further explored and discussed. Finally, the adsorption mechanism of Fe3O4@LS on Cd2+ was obtained. Results show that Fe3O4@LS has a more stable spatial network structure than LS, and the pore size, specific surface area and active sites increase. The maximum adsorption capacity can reach 88.00 mg/g when pH = 6 and the dosage of Fe3O4@LS is 1000 mg/L. The adsorption of Cd2+ by Fe3O4@LS conforms to pseudosecond-order kinetics and the Temkin isothermal adsorption model. Further mechanistic investigations show that the sorption of Cd2+ on Fe3O4@LS is mainly attributed to surface complexation, electrostatic attraction and coprecipitation. The coexistence of cations in water will inhibit the adsorption of Fe3O4@LS. Fe3O4@LS has superparamagnetism and a good response to an external magnetic field. The adsorption rate can still reach >60 % after four elutions with NaCl as the eluent. This material can be reused and has good application potential.

A Comprehensive Review of Polysaccharide-Based Hydrogels as Promising Biomaterials

Polysaccharides have emerged as a promising material for hydrogel preparation due to their biocompatibility, biodegradability, and low cost. This review focuses on polysaccharide-based hydrogels' synthesis, characterization, and applications. The various synthetic methods used to prepare polysaccharide-based hydrogels are discussed. The characterization techniques are also highlighted to evaluate the physical and chemical properties of polysaccharide-based hydrogels. Finally, the applications of SAPs in various fields are discussed, along with their potential benefits and limitations. Due to environmental concerns, this review shows a growing interest in developing bio-sourced hydrogels made from natural materials such as polysaccharides. SAPs have many beneficial properties, including good mechanical and morphological properties, thermal stability, biocompatibility, biodegradability, non-toxicity, abundance, economic viability, and good swelling ability. However, some challenges remain to be overcome, such as limiting the formulation complexity of some SAPs and establishing a general protocol for calculating their water absorption and retention capacity. Furthermore, the development of SAPs requires a multidisciplinary approach and research should focus on improving their synthesis, modification, and characterization as well as exploring their potential applications. Biocompatibility, biodegradation, and the regulatory approval pathway of SAPs should be carefully evaluated to ensure their safety and efficacy.

Biochar Nanocomposite as an Inexpensive and Highly Efficient Carbonaceous Adsorbent for Hexavalent Chromium Removal

Biochar is commonly used for soil amendment, due to its excellent water-holding capacity. The Cr(VI) contamination of water is a current environmental issue in industrial regions. Here, we evaluated the effects of two-step modifications on boosting biochar's performance in terms of the removal of aqueous hexavalent chromium (Cr(VI)), along with investigating the alterations to its surface properties. The first modification step was heat treatment under air at 300 °C, producing hydrophilic biochar (HBC). The resulting HBC was then impregnated with zero-valent iron nanoparticles (nZVI), creating an HBC/nZVI composite, adding a chemical reduction capability to the physical sorption mechanism. Unmodified biochar (BC), HBC, and HBC/nZVI were characterized for their physicochemical properties, including surface morphology and elemental composition, by SEM/EDS, while functional groups were ascertained by FTIR and surface charge by zeta potential. Cr(VI) removal kinetic studies revealed the four-time greater sorption capacity of HBC than BC. Although unmodified BC showed faster initial Cr(VI) uptake, it rapidly worsened and started desorption. After nZVI impregnation, the Cr(VI) removal rate of HBC increased by a factor of 10. FTIR analysis of biochars after Cr(VI) adsorption showed the presence of Cr(III) oxide only on the used HBC/nZVI and demonstrated that the carbonyl and carboxyl groups were the main groups involved in Cr(VI) sorption. Modified biochars could be considered an economical substitute for conventional methods.

Application of biowaste generated by the production chain of pitaya fruit (Hylocereus undatus) as an efficient adsorbent for removal of naproxen in water

Pharmaceutical compounds are a serious problem in the environment. They cause damage to the aquatic, animal, and human organisms and soon became considered emerging pollutants where their removal is extremely urgent. Among the techniques used, adsorption has been used with success, where several adsorbent materials, including those from residual biomass, have been used to remove these pollutants. In this study, the skins of the pitaya fruit (Hylocereus undatus) productive chain were carbonized with ZnCl₂ to obtain activated carbon and later used in the adsorption of the drug naproxen (NPX) in a batch system. The Freundlich model demonstrated a better adjustment for the equilibrium isotherms. A high adsorption capacity for NPX (158.81 mg g^-1) was obtained at 328 K, which can be attributed to the remarkable textural properties of the adsorbent, besides certain functional groups present on its surface. Thermodynamic studies confirmed the endothermic nature of the adsorption process (∆H⁰ = 0.2898 kJ mol^-1). The linear driving force model (LDF) presented a good statistical adjustment to the experimental kinetic data. The application of the material in the treatment of simulated wastewater composed of various pharmaceutical drugs and salts was very promising, reaching 75.7% removal. Therefore, it can be inferred that the application of activated carbon derived from pitaya bark is highly promising in removing the NPX drug and treating synthetic mixtures containing other pharmaceutical substances.

Accumulation of chromium in plants and its repercussion in animals and humans

The untreated effluents released from industrial operations have adverse impacts on human health, environment and socio-economic aspects. Environmental pollution due to chromium is adversely affecting our natural resources and ecosystem. Chromium is hazardous carcinogenic element released from spontaneous activities and industrial procedures. Chromium toxicity, mobility and bioavailability depend mainly on its speciation. Chromium mainly exists in two forms, first as an immobile, less soluble trivalent chromium [Cr(III)] species under reducing conditions whereas hexavalent chromium [Cr(VI)] as a mobile, toxic and bioavailable species under oxidizing conditions. Hexavalent chromium is more pernicious in comparison to trivalent form. Chromium negatively affects crop growth, total yield and grain quality. Exposure of chromium even at low concentration enhances its accretion in cells of human-beings and animals which may show detrimental health effects. Many techniques have been utilized for the elimination of chromium. The selection of the green and cost-efficient technology for treatment of industrial effluent is an arduous task. The present review highlights the problems associated with chromium pollution and need of its immediate elimination by suitable remediation strategies. Further, investigations are required to fill the gaps to overcome the problem of chromium contamination and implementation of sustainable remediation strategies with their real-time applicability on the contaminated sites.

Chitosan-modified biochar: Preparation, modifications, mechanisms and applications

The chitosan-modified biochar composite, as a carbohydrate polymer, has received increasing attention and becomes a research hotspot. It is a promising impurity adsorption material, which has potential application value in the agricultural environment fields such as soil improvement and sewage purification. The composite can combine the advantages of biochar with chitosan, and the resulting composite usually exhibits a great improvement in its surface functional groups, adsorption sites, stability, and adsorption properties. In addition, compared to other adsorbents, the composite truly achieves the concept of "waste control by waste". In this paper, the preparation method, composite classification, adsorption mechanism, and models of biochar modified by chitosan are introduced, meanwhile, we also review and summarize their effects on the decontamination of wastewater and soil. In addition to common heavy metal ions, we also review the adsorption and removal of some other organic/inorganic pollutants, including (1) drug residues; (2) dyes; (3) phosphates; (4) radionuclides; (5) perfluorochemicals, etc. Moreover, challenges and prospects for the composite are presented and further studies are called for the chitosan-biochar composite. We believe that the composite will lead to further achievements in the field of environmental remediation.

Preparation of hydrogels based on pectin with different esterification degrees and evaluation of their structure and adsorption properties

In this study, pectin (Pe) with different esterification degrees was used as raw materials to prepared hydrogel adsorbents via free radical polymerization. The effect of Pe esterification degree on hydrogel structure and adsorption performance was studied by FTIR, SEM and XPS characterization and copper ion adsorption experiment. The results demonstrated that the carboxyl group in the hydrogels was bonded to Cu²⁺ through electrostatic force and coordination, which was an important factor in its adsorption capacity. The hydrogels prepared from Pe with low esterification degree had finer pores and higher carboxyl content, so the adsorption capacity on both water and Cu²⁺ was stronger. The preparation of hydrogels from low-ester Pe was more conducive to the adsorption of copper ions. Besides, the adsorption behavior of the hydrogels on Cu²⁺ was investigated through the adsorption thermodynamics and kinetics. The results indicated that the adsorption kinetics of the hydrogels was in accordance with the quasi-second-order model. The adsorption of Cu²⁺ by hydrogels was the result of physical and chemical adsorption, which was endothermic under natural condition, and a higher temperature will result in more favorable spontaneous adsorption.

A Clean Method for Vanadium (V) Reduction with Oxalic Acid

Water pollution deteriorates ecosystems and is a great threat to the environment. The environmental benefits of wastewater treatment are extremely important to minimize pollutants. Here, the oxalic acid used as reductant was used to treat the wastewater which contained high concentration of vanadium (V). Nearly 100% of vanadium was efficiently reduced at selected reaction conditions. The optimization results simulated by response surface methodology (RSM) analysis indicated the parameters all had significant effects on the reduction process, and followed the order: dosage of oxalic acid > reaction temperature > reaction time > initial pH of vanadium-containing wastewater. The reduction behavior analysis indicated that the pseudo first-order kinetics model could describe well the reduction process with Ea = 42.14 kJ/mol, and was described by the equation as followed: −LnC=K0·[pH]0.1016·[n(O)/n(V)]2.4569·[T]2.2588·exp(−42.14/T)·t.

Lead adsorption and antibacterial activity using modified magnetic biochar/sodium alginate nanocomposite

Biochar is one of the most promising wastewater treatment materials. As shown in the Scanning Electron Micrograph, the magnetic biochar (BC) cross-linked glutaraldehyde (G) with sodium alginate (SA) (BC-G-SA) nanocomposite formed with uniform particle size without aggregation, and an X-Ray Diffraction study revealed that the BC-G-SA nanocomposite has an amorphous structure. The BC-G-SA nanocomposite enhanced the microwave adsorption process for Pb (II). The maximum metal capacity value was obtained using the microwave adsorption technique at pH 5.0 and contact time 20 s for Pb (II) at medium and low microwave power (940 and 1400 μmol g^-1, respectively). Pb (II) adsorption isotherm follows a pseudo-second-order model. Also, the BC-G-SA nanocomposite effectively inhibited bacterial growth throughout the growth kinetics experiment. BC-G-SA inhibited the growth of S. aureus at a MIC of 200 g mL^-1, whereas L. monocytogenes had a MIC of 200 g mL^-1. The MIC values for E. faecalis and E. faecium were significantly lower (50 and 100 g mL^-1, respectively).

Woody residues of the grape production chain as an alternative precursor of high porous activated carbon with remarkable performance for naproxen uptake from water

Activated carbon prepared from grape branches was used as a remarkable adsorbent to uptake naproxen and treat a synthetic mixture from aqueous solutions. The material presented a highly porous texture, a surface area of 938 m² g^-1, and certain functional groups, which were key factors to uptake naproxen from effluents. The maximum adsorption capacity predicted by the Langmuir model for naproxen was 176 mg g^-1. The thermodynamic study revealed that the adsorption process was endothermic and spontaneous. The linear driving force (LDF) model presented a good statistical adjustment to the experimental decay data. A suitable interaction pathway of naproxen adsorption onto activated carbon was proposed. The adsorbent material was highly efficient to treat a synthetic mixture containing several drugs and salts, reaching 95.63% removal. Last, it was found that the adsorbent can be regenerated up to 7 times using an HCl solution. Overall, the results proved that the activated carbon derived from grape branches could be an effective and sustainable adsorbent to treat wastewaters containing drugs.

Three-dimension hierarchical composite via in-situ growth of Zn/Al layered double hydroxide plates onto polyaniline-wrapped carbon sphere for efficient naproxen removal

In this work, a novel adsorbent, 3D hierarchical CS@PANI@ZnAl-LDH composite, has been successfully fabricated through the hydrothermal synthesis of the carbon sphere, oxidative polymerization of polyaniline, and in-site growth of ZnAl-layered double hydroxides, simultaneously applied for the naproxen removal from aqueous solutions. The dynamics and isotherms fit better with the pseudo-second-order and Langmuir model, demonstrating the chemisorption, monolayer, and endothermic process. In addition, the high uptake capacities of CS@PANI@ZnAl-LDH for naproxen was 545.5 mg/g at 298 K when the pH was 5.0, outperforming most previously reported materials. Moreover, after five adsorption-desorption cycles, the spent CS@PANI@ZnAl-LDH maintains high removal efficiency and structural composition, revealing excellent recyclability and stability. Furthermore, Fourier transformed infrared spectroscopy (FT-IR), and X-ray photoelectron spectroscopy (XPS) analyses indicate electrostatic interactions, π-π interactions, and hydrogen bonding between CS@APNI@ZnAl-LDH and naproxen. Quantitative analyses, Localized orbit locator (LOL)-π isosurface, and Independent Gradient Model further verify the adsorption mechanisms mentioned above, indicating the synergistic effects between PANI and ZnAl-LDH improve the elimination ability for naproxen. Significantly, Hirshfeld surface analyses reveal that naproxen behaves as the H-bond acceptor, and the ZnAl-LDH acts as the H-bond donor. This work provided a feasible way to design purification materials for wastewater treatment.

Removal of hexavalent chromium by biochar derived from Azadirachta indica leaves: Batch and column studies

This report details the preparation, characterization, and applications of an inexpensive adsorbent obtained from Azadirachta indica leaves (Neem biochar (NBC)) and used to remove Cr(VI) from the synthetic waste water. The obtained NBC was characterized by XRD, FTIR, FESEM, EDX and Zeta potential measurements. Adsorption experiments conducted at various pH levels confirmed that 58.54 mg g^-1 of Cr(VI) was removed by NBC at pH 2. Experiments conducted at various temperatures revealed that the Cr(VI) adsorption on NBC fits the Langmuir-type adsorption isotherm. A fixed-bed column study was conducted to obtain breakthrough curve for the adsorption process, which confirmed that the NBC usage rate was 4.63 g/L. Cr(VI)NBC was reactivated by NaOH treatment, and the reactivated NBC was used as a sorbent to remove fresh Cr(VI) from the synthetic waste water repeatedly. A cost analysis was also performed for the Cr(VI) removal confirmed that the process was less expensive.

Microbial production and recovery of hybrid biopolymers from wastes for industrial applications- a review

Agro-industrial wastes to be a global concern since agriculture and industrial processes are growing exponentially with the fast increase of the world population. Biopolymers are complex molecules produced by living organisms, but also found in many wastes or derived from wastes. The main drawbacks for the use of polymers are the high costs of the polymer purification processes from waste and the scale-up in the case of biopolymer production by microorganisms. However, the use of biopolymers at industrial scale for the development of products with high added value, such as food or biomedical products, not only can compensate the primary costs of biopolymer production, but also improve local economies and environmental sustainability. The present review describes some of the most relevant aspects related to the synthesis of hybrid materials and nanocomposites based on biopolymers for the development of products with high-added value.

Polysaccharide-based (nano)materials for Cr(VI) removal

Chromium is a potentially poisonous and carcinogenic species, which originates from human activities and various industries such as leather, steel, iron, and electroplating industries. Chromium is present in various oxidation states, among which hexavalent chromium (Cr(VI)) is highly toxic as a natural contaminant. Therefore, chromium, particularly Cr(VI), must be eliminated from the environment, soil, and water to overcome significant problems due to its accumulation in the environment. There are different approaches such as adsorption, ion exchange, photocatalytic reduction, etc. for removing Cr(VI) from the environment. By converting Cr(VI) to Cr(III), its toxicity is reduced. Cr(III) is essential for the human diet, even in small amounts. Today, biopolymers such as alginate, cellulose, gum, pectin, starch, chitin, and chitosan have received much attention for the removal of environmental pollutants. Biopolymers, particularly polysaccharides, are very useful compounds due to their OH and NH₂ functional groups and some advantages such as biodegradability, biocompatibility, and accessibility. Therefore, they can be widely applied in catalytic applications and as efficient adsorbents for the removal of toxic compounds from the environment. This review briefly investigates the application of polysaccharide-based (nano)materials for efficient Cr(VI) removal from the environment using adsorption/reduction, photocatalytic, and chemical reduction mechanisms.

A Novel Biosorbent From Hardwood Cellulose Nanofibrils Grafted With Poly(m-Aminobenzene Sulfonate) for Adsorption of Cr(VI)

Cellulose from different lignocellulosic biomass can be used to prepare various materials. In this work, the cellulose nanofibrils were produced from hardwood bleached kraft pulp. Then, a novel biosorbent from cellulose nanofibrils grafted with poly(m-aminobenzene sulfonate) (PABS) was prepared for effective detoxification and adsorption of Cr(VI) in an aqueous medium. 6,6-tetramethylpiperidine-1-oxyl (TEMPO)-oxidized cellulose nanofibrils (TOCNF) with a high aspect ratio was used as an adsorbent matrix. PABS, an amine-rich conductive polymer, was grafted onto TOCNF via a successive two-step reaction. The analyses of Fourier transform infrared (FT-IR) spectroscopy and X-ray photoelectron spectroscopy (XPS) confirmed the successful grafting reaction between TOCNF and PABS. The biosorbent from TOCNF-bonded PABS with the nitrogen content of 7.0% was synthesized. It exhibited excellent Cr(VI) adsorption capacity at a solution pH below 3, and almost 100% Cr(VI) can be removed. The adsorption of Cr(VI) on the biosorbent was described by a pseudo-second-order model and obeyed the Langmuir model. The Cr(VI) adsorption capacity of the biosorbent from TOCNF-bonded PABS was almost 10 times higher than that of TOCNF. It was interesting to note that part of Cr(VI) ions had been reduced to Cr(III) during the adsorption process. It indicated that the biosorbent from TOCNF grafted with PABS could detoxify and adsorb Cr(VI) synchronously.

Recent advances in biochar engineering for soil contaminated with complex chemical mixtures: Remediation strategies and future perspectives

Heavy metal/metalloids (HMs) and polycyclic aromatic hydrocarbons (PAHs) in soil have caused serious environmental problems, compromised agriculture quality, and have detrimental effects on all forms of life including humans. There is a need to develop appropriate and effective remediation methods to resolve combined contaminated problems. Although conventional technologies exist to tackle contaminated soils, application of biochar as an effective renewable adsorbent for enhanced bioremediation is considered by many scientific researchers as a promising strategy to mitigate HM/PAH co-contaminated soils. This review aims to: (i) provide an overview of biochar preparation and its application, and (ii) critically discuss and examine the prospects of (bio)engineered biochar for enhancing HMs/PAHs co-remediation efficacy by reducing their mobility and bioavailability. The adsorption effectiveness of a biochar largely depends on the type of biomass material, carbonisation method and pyrolysis conditions. Biochar induced soil immobilise and remove metal ions via various mechanisms including electrostatic attractions, ion exchange, complexation and precipitation. PAHs remediation mechanisms are achieved via pore filling, hydrophobic effect, electrostatic attraction, hydrogen bond and partitioning. During last decade, biochar engineering (modification) via biological and chemical approaches to enhance contaminant removal efficiency has garnered greater interests. Hence, the development and application of (bio)engineered biochars in risk management, contaminant management associated with HM/PAH co-contaminated soil. In terms of (bio)engineered biochar, we review the prospects of amalgamating biochar with hydrogel, digestate and bioaugmentation to produce biochar composites.

Self-decoration of N-doped graphene oxide 3-D hydrogel onto magnetic shrimp shell biochar for enhanced removal of hexavalent chromium

In this work, a novel decorated and combined N-doped graphene oxide hydrogel with shrimp shell magnetic biochar (NGO3DH-MSSB) biosorbent was fabricated as an effective material for Cr(VI) removal. Three-dimensional self-assembled graphene oxide hydrogel was synthesized using nitrogen source, ethylenediamine (EDA). Characterizations of NGO3DH-MSSB biosorbent were established by FT-IR, TGA, SEM and BET, where high surface area (398.05 m²/g) compared with that of MSSB (138.64 m²/g) was characterized. The maximum achieved swelling ratio (800%) was only after 300 min. The binding mechanisms between Cr(VI) ions and NGO3DH-MSSB biosorbent were controlled by electrostatic adsorption (ion-pair), pore filling, and reduction-coordination reaction. Adsorption was described by the pseudo-second order kinetic (R² =0.9994, 0.9983 and 0.9992) at 10, 50 and 100 mg/L and Langmuir isotherm model (R² =0.9997, 0.9957 and 0.9912) at 25, 40 and 50 °C. The adsorption capacity (350.42 mg/g) was achieved at pH 1.0, using initial Cr(VI) concentration (100 mg/L) and contact time (180 min) at room temperature. NGO3DH-MSSB biosorbent could be successfully reused after eight cycles. The percentage removal of Cr(VI) were confirmed as 99.79%, 99.20% and 98.00% from tap water, sea water and wastewater, respectively.

A high-efficiency Klebsiella variicola H12-CMC-FeS@biochar for chromium removal from aqueous solution

In polluted groundwater, surface water, and industrial sites, chromium is found as one of the most common heavy metals, and one of the 20 main pollutants in China, which poses a great threat to the ecological environment and human health. Combining biological and chemical materials to treat groundwater contaminated by heavy metals is a promising restoration technology. In this research, Klebsiella variicola H12 (abbreviated as K. variicola) was found to have Cr(VI) reduction ability. A high-efficiency Klebsiella variicola H12-carboxymethyl cellulose (abbreviated as CMC)-FeS@biochar system was established for Cr(VI) removal from aqueous solution. The Scanning Electron Microscope-Energy Dispersive Spectrometer (SEM-EDS), X-ray photoelectron spectroscopy (XPS) results indicated that CMC-FeS was successfully loaded onto the surface of biochar, and K. variicola H12 grew well in the presence of CMC-FeS@biochar with microbial biomass up to 4.8 × 108 cells mL-1. Cr(VI) removal rate of CMC-FeS@biochar system, K. variicola H12 system and K. variicola H12 + CMC-FeS@biochar system were 61.8%, 82.2% and 96.6% respectively. This study demonstrated K. variicola H12-CMC-FeS@biochar system have potential value for efficient removal of Cr(VI) from Cr(VI)-polluted groundwater.

Biodegradable gelatin composite hydrogels filled with cellulose for chromium (VI) adsorption from contaminated water

Biopolymers are promising materials for water treatment applications due to their abundance, low cost, expandability, and chemical structure. In this work, gelatin hydrogels filled with cellulose in the form of pristine eucalyptus residues (PER) or treated eucalyptus residues (TER) were prepared for adsorption and chromium removal in contaminated water. PER is a lignocellulosic compound, with cellulose, hemicellulose, and lignin, while TER has cellulose as a major component. FT-Raman Spectroscopy and FTIR analysis confirmed the crosslink reaction with glutaraldehyde and indicated that fillers altered the gelatin molecular vibrations and formed new hydrogen bonds, impacting the hydrogels' crystalline structure. The hydrogen bond energy was altered by the cellulosic fillers' addition and resulted in higher thermal stability (~10 °C). Hydrogels presented a Fickian diffusion, where gelatin hydrogel showed the highest swelling ability (466%), and composites showed lower values with the filler content increase. The chromium adsorption capacity presented values between 12 and 13 mg/g, i.e., featuring an excellent removal capacity which is related with hydrogel crosslinked structure and fibers surface hydroxyl groups, highlighting gelatin hydrogel TER 5% with better removal capacity. The developed hydrogels were produced from biomacromolecules with low-cost and potential application in contaminated water.

Application of cellulose nanocrystals prepared from agricultural wastes for synthesis of starch-based hydrogel nanocomposites: Efficient and selective nanoadsorbent for removal of cationic dyes from water

A novel and bio-based hydrogel nanocomposite were developed using reinforcement of starch grafted copolymers of 2-acrylamido-2methyl propane sulfonate and acrylic acid (starch-g-(AMPS-co-AA)) hydrogel with magnetite-functionalized cellulose nanocrystals (MCNCs). The MCNCs-hydrogel was utilized as a proficient and environmentally benign nanoadsorbent for removal of cationic dyes with great capacity and selectivity. Sugar-beet pulp (SBP) was exploited for CNCs production through acid hydrolysis of enzymatic-mediated SBP. Fe₃O₄ nanoparticles were anchored on CNCs to synthesize MCNCs as the nanofiller of MCNCs/starch-g-(AMPS-co-AA) hydrogel. The synthesis of CNCs, MCNCs and hydrogel nanocomposite were confirmed using FESEM, FTIR, VSM and TGA analyses. Hydrogel nanocomposite showed excellent and reusable capacity for specific adsorption of cationic dyes. The effects of nanoadsorbent dosage, time, pH, dye initial concentration, and temperature on the adsorption were scrutinized for two model cationic dyes (crystal violet (CV) and methylene blue (MB). Adsorption capacities for CV and MB were 2500.0 mg/g and 1428.6 mg/g, respectively.

Chitosan, alginate and other macromolecules as activated carbon immobilizing agents: A review on composite adsorbents for the removal of water contaminants

Activated carbon (AC) is widely used in water treatment, however, it has some technical disadvantages, such as its high cost and difficulty to recover. To overcome these drawbacks, AC particles have been encapsulated within a polymeric support, mainly chitosan and alginate-based. The use of these biological macromolecules results in composites with lower-cost, superior mechanical properties, and higher number of functional groups, advantages that have been attracted the attention of the scientific community. However, the number of publications is relatively low, demonstrating an important research gap yet to be investigated. Thus, this paper aims to review the recent studies concerning the use of chitosan, alginate and other macromolecules as AC immobilizing agents, describing the synthesis methods, characterization analyses and adsorption studies, focusing on the main advantages, disadvantages, gaps and future perspectives. Throughout the review it was verified that the composites were able to remove several water contaminants, mainly dyes and heavy metals, with high efficiency. Synergistic effects were detected, indicating the role of both polymers and AC, which increased the spectrum of contaminants capable of being adsorbed. Finally, it was observed a gap in column experiments, suggesting that future studies are essential to elucidate the applications in the industrial perspective.