Non-suspended microalgae cultivation for wastewater refinery and biomass production

Immobilized microalgae: principles, processes and its applications in wastewater treatment

Microalgae have emerged as potential candidates for biomass production and pollutant removal. However, expensive biomass harvesting, insufficient biomass productivity, and low energy intensity limit the large-scale production of microalgae. To break through these bottlenecks, a novel technology of immobilized microalgae culture coupled with wastewater treatment has received increasing attention in recent years. In this review, the characteristics of two immobilized microalgae culture technologies are first presented and then their mechanisms are discussed in terms of biofilm formation theories, including thermodynamic theory, Derjaguin-Landau-Verwei-Overbeek theory (DLVO) and its extended theory (xDLVO), as well as ionic cross-linking mechanisms in the process of microalgae encapsulated in alginate. The main factors (algal strains, carriers, and culture conditions) affecting the growth of microalgae are also discussed. It is also summarized that immobilized microalgae show considerable potential for nitrogen and phosphorus removal, heavy metal removal, pesticide and antibiotic removal in wastewater treatment. The role of bacteria in the cultivation of microalgae by immobilization techniques and their application in wastewater treatment are clarified. This is economically feasible and technically superior. The problems and challenges faced by immobilized microalgae are finally presented.

Effectiveness and associated mechanisms of a combination of biofilm attached cultivation and mixotrophy in promoting microalgal biomass

The effectiveness and associated mechanisms of the biofilm attached cultivation (BAC) under mixotrophy in promoting algal proliferation were investigated. Commercially valuable unicellular microalgae Chromochloris zofingiensis was first used in BAC. Compared with suspended cultivation, the results unequivocally demonstrated the growth benefits of C. zofingiensis cells under BAC with high biomass productivity of 8.53 g m-2 d-1. The physiological and transcriptomic data revealed that the augmented biomass yield was attributable to larger cell size, higher accumulation of chemical substances, significantly upregulated carbon fixation pathway, and greater energy supply efficiency. Here, BAC acts as a "cage" was proposed. Specifically, cells allocate less energy toward mobility, directing a higher share toward growth and production due to their immobilized lifestyle. These findings provide novel insights for optimizing cultivation strategies for commercially valuable algal species and offer a novel perspective from microalgae physiological on understanding higher biomass yield in BAC.

Microalgal-bacterial biofilms for wastewater treatment: Operations, performances, mechanisms, and uncertainties

Microalgal-bacterial biofilms have been increasingly considered of great potential in wastewater treatment due to the advantages of microalgal-bacterial synergistic pollutants removal/recovery, CO2 sequestration, and cost-effective biomass-water separation. However, such advantages may vary widely among different types of microalgal-bacterial biofilms, as the biofilms could be formed on different shapes and structures of attachment substratum, generating "false hope" for certain systems in large-scale wastewater treatment if the operating conditions and pollutants removal properties are evaluated based on the general term "microalgal-bacterial biofilm". This study, therefore, classified microalgal-bacterial biofilms into biofilms formed on 2D substratum, biofilms formed on 3D substratum, and biofilms formed without substratum (i.e. microalgal-bacterial granular sludge, MBGS). Biofilms formed on 2D substratum display higher microalgae fractions and nutrients removal efficiencies, while the adopted long hydraulic retention times were unacceptable for large-scale wastewater treatment. MBGS are featured with much lower microalgae fractions, most efficient pollutants removal, and acceptable retention times for realistic application, yet the feasibility of using natural sunlight should be further explored. 3D substratum systems display wide variations in operating conditions and pollutants removal properties because of diversified substratum shapes and structures. 2D and 3D substratum biofilms share more common in eukaryotic and prokaryotic microbial community structures, while MGBS biofilms are more enriched with microorganisms favoring EPS production, biofilm formation, and denitrification. The specific roles of stratified extracellular polymeric substances (EPS) in nutrients adsorption and condensation still require in-depth exploration. Nutrients removal uncertainties caused by microalgal-bacterial synergy decoupling under insufficient illumination, limited microbial community control, and possible greenhouse gas emission exacerbation arising from microalgal N2O generation were also indicated. This review is helpful for revealing the true potential of applying various microalgal-bacterial biofilms in large-scale wastewater treatment, and will provoke some insights on the challenges to the ideal state of synergistic pollutants reclamation and carbon neutrality via microalgal-bacterial interactions.

Bubble column photobioreactor (BCPR) for cultivating microalgae and microalgal consortium (Co-CC) with additional CO2 supply for enhancing biomass, lipid, and preferable fatty acids production

The present study has designed and developed a 5 L bubble column photobioreactor (BCPR) to investigate two microalgal strains Chlorella sp. S-01, Chlorella sp. S-02 and their consortium Co-CC (Chlorella sp. S-01 + Chlorella sp. S-02) at 0.03, 5, and 10% CO2 supply for biomass and lipid production. The dry cell weight of Chlorella sp. S-01, Chlorella sp. S-02 and Co-CC were, respectively about 1.41, 1.32, and 1.39 g/L on the 20th day without CO2 supply, while it was 1.76, 1.61, and 1.87 g/L, respectively at 10% CO2 supply and similarly, chlorophyll-a content was higher in 10% CO2 supplied condition over control. Interestingly, Co-CC grown at all the CO2 concentrations showed similar lipid content between 19.30 and 1F9.41%. As an integrated refinery approach, de-oiled biomass of Co-CC was subjected to carbohydrates and protein estimation and found that 46.2% and 30.80% in 10% CO2 supply condition in BCPR. Lipid extracted from the Co-CC grown under 0.03, 5, and 10% CO2 supply in 5L BCPR was converted to biodiesel, and the biodiesel yield was estimated to be 62.78%. Further, the fatty acid profile of Co-CC grown at 10% CO2 showed higher levels of C16:0, C16:1, C18:1, and monounsaturated fatty acids contents over other CO2 supplied conditions. Biodiesel of Co-CC showed favourable fuel properties such as density, higher heating value, oxidative stability, CFPP, viscosity, degree of unsaturation, saponification value, and cetane number, which were also in accordance with ASTM, and EN, biodiesel standards.

Potential of Porous Substrate Bioreactors for Removal of Pollutants from Wastewater Using Microalgae

Porous substrate bioreactors (PSBRs) are a new technology to grow microalgae immobilized in a dense culture and solve some problems linked to suspended cultivation. During recent years, this technology has been used in laboratory and pilot setups in different fields of environmental biotechnology, such as wastewater treatment. The aim of this short review is to introduce the PSBR technology, summarize the results obtained in removing some pollutants from wastewater, provide an assessment of the potential of PSBRs for wastewater treatment, and the subsequent use of the algal biomass for other purposes.

Improving biomass and carbohydrate production of microalgae in the rotating cultivation system on natural carriers

Biofilm-based algal technologies have gained popularity due to higher biomass productivity, efficient harvesting, and water-saving over suspended growth systems. A rotating attached system was designed to assess the biofilm-forming capacity of different isolated microalgal strains from the Persian Gulf. Four microalgal strains, including two Chlorella sp., one Picochlorum sp. and one filamentous cyanobacterium Desmonostoc sp. were cultivated on four carriers: jute, cotton, yarn and nylon. The carriers' physicochemical surface characteristics and attachment effects, like contact angle, were investigated. The incorporated biomass and exopolysaccharides (EPS) content in the suspended and biofilm system was calculated and compared. The results showed that the cyanobacterium strain had the biofilm formation capability on both jute and cotton in the attached cultivation system. Under the same culture conditions, the biomass productivity on jute and cotton carriers was significantly higher (4.76 and 3.61 g m^- 2 respectively) than the growth in aqueous suspension (1.19 g m^- 2 d^- 1). The greatest incorporated exopolysaccharides amount was observed on jute (43.62 ± 4.47%) and the lowest amount was obtained from the growth on positive charge yarn (18.62 ± 1.88%). This study showed that in comparison with planktonic growth, the colonization of cyanobacterial cells and subsequent production of extracellular matrix and biofilm formation can lead to increased biomass production.

Immobilized microalgal system: An achievable idea for upgrading current microalgal wastewater treatment

Efficient wastewater treatment accompanied by sustainable "nutrients/pollutants waste-wastewater-resources/energy nexus" management is acting as a prominent and urgent global issue since severe pollution has occurred increasingly. Diverting wastes from wastewater into the value-added microalgal-biomass stream is a promising goal using biological wastewater treatment technologies. This review proposed an idea of upgrading the current microalgal wastewater treatment by using immobilized microalgal system. Firstly, a systematic analysis of microalgal immobilization technology is displayed through an in-depth discussion on why using immobilized microalgae for wastewater treatment. Subsequently, the main technical approaches employed for microalgal immobilization and pollutant removal mechanisms by immobilized microalgae are summarized. Furthermore, from high-tech technologies to promote large-scale production and application potentials in diverse wastewater and bioreactors to downstream applications lead upgradation closer, the feasibility of upgrading existing microalgal wastewater treatment into immobilized microalgal systems is thoroughly discussed. Eventually, several research directions are proposed toward the future immobilized microalgal system for microalgal wastewater treatment upgrading. Together, it appears that using immobilization for further upgrading the microalgae-based wastewater treatment can be recognized as an achievable alternative to make microalgal wastewater treatment more realistic. The information and perspectives provided in this review also offer a feasible reference for upgrading conventional microalgae-based wastewater treatment.

Microalgal-induced remediation of wastewaters loaded with organic and inorganic pollutants: An overview

The recent surge in industrialization has intensified the accumulation of various types of organic and inorganic pollutants due to the illegal dumping of partially and/or untreated wastewater effluents in the environment. The pollutants emitted by several industries pose serious risk to the environment, animals and human beings. Management and diminution of these hazardous organic pollutants have become an incipient research interest. Traditional physiochemical methods are energy intensive and produce secondary pollutants. So, bioremediation via microalgae has appeared to be an eco-friendly and sustainable technique to curb the adverse effects of organic and inorganic contaminants because microalgae can degrade complex organic compounds and convert them into simpler and non-toxic substances without the release of secondary pollutants. Even some of the organic pollutants can be exploited by microalgae as a source of carbon in mixotrophic cultivation. Literature survey has revealed that use of the latest modification techniques for microalgae such as immobilization (on alginate, carrageena and agar), pigment-extraction, and pretreatment (with acids) have enhaced their bioremedial potential. Moreover, microalgal components i.e., biopolymers and extracellular polymeric substances (EPS) can potentially be exploited in the biosorption of pollutants. Though bioremediation of wastewaters by microalgae is quite well-studied realm but some aspects like structural and functional responses of microalgae toward pollutant derivatives/by-products (formed during biodegradation), use of genetic engineering to improve the tolerance of microalgae against higher concentrations of polluatans, and harvesting cost reduction, and monitoring of parameters at large-scale still need more focus. This review discusses the accumulation of different types of pollutants into the environment through various sources and the mechanisms used by microalgae to degrade commonly occurring organic and inorganic pollutants.

Screening of microalgae species and evaluation of algal-lipid stimulation strategies for biodiesel production

Microalgae is considered an alternative source for biodiesel production producing renewable, sustainable and carbon-neutral energy. Microalgae property changes among species, which determines the efficiency of biodiesel production. Besides the lipid content evaluation, multi-principles (including high lipid productivity, high biomass yield, pollution resistance and desired fatty acid, etc.) for superior oil-producing species screening was proposed in this review and three microalgae species (Chlorella vulgaris, Scenedesmus obliquus and Mychonastes afer) with high bio-lipid producing prospect were screened out based on big data digging and analysis. The multilateral strategies for algal-lipid stimulating were also compared, among which, nutrient restriction, temperature control, heterotrophy and chemicals addition showed high potential in enhancing lipid accumulation; while electromagnetic field showed little effect. Interestingly, it was found that the lipid accumulation was more sensitive to nitrogen (N)-limitation other than phosphorus (P). Nutrient restriction, salinity stress etc. enhanced lipid accumulation by creating a stressed environment. Hence, optimum conditions (e.g. N:15-35 mg/L and P:4-16 mg/L) should be set to balance the lipid accumulation and biomass growth, and further guarantee the algal-lipid productivity. Otherwise, two-step cultivation could be applied during all the stressed stimulation. Different from lab study, effectiveness, operability and economy should be all considered for stimulation strategy selection. Nutrient restriction, temperature control and heterotrophy were highly feasible after the multidimensional evaluation.

Advancement in algal bioremediation for organic, inorganic, and emerging pollutants

Rapidly changing bioremediation prospects are key drive to develop sustainable options that can offer extra benefits rather than only environmental remediation. Algal remediating is gaining utmost attention due to its mesmerising sustainable features, removing odour and toxicity, co-remediating numerous common and emerging inorganic and organic pollutants from gaseous and aqueous environments, and yielding biomass for a range of valuable products refining. Moreover, it also improves carbon footprint via carbon-capturing offers a better option than any other non-algal process for several high CO₂-emitting industries. Bio-uptake, bioadsorption, photodegradation, and biodegradation are the main mechanisms to remediate a range of common and emerging pollutants by various algae species. Bioadsorption was a dominant remediation mechanism among others implicating surface properties of pollutants and algal cell walls. Photodegradable pollutants were photodegraded by microalgae by adsorbing photons on the surface and intracellularly via stepwise photodissociation and breakdown. Biodegradation involves the transportation of selective pollutants intracellularly, and enzymes help to convert them into simpler non-toxic forms. Robust models are from the green microalgae group and are dominated by Chlorella species. This article compiles the advancements in microalgae-assisted pollutants remediation and value-addition under sustainable biorefinery prospects. Moreover, filling the knowledge gaps, and recommendations for developing an effective platform for emerging pollutants remediation and realization of commercial-scale algal bioremediation.

Data-driven analysis on immobilized microalgae system: New upgrading trends for microalgal wastewater treatment

Microalgal immobilization is receiving increasing attention as one of the most viable alternatives for upgrading conventional wastewater treatment. However, an in-depth discussion of the state-of-the-art and limitations of available technologies is currently lacking. More importantly, the reason for the hesitant development of immobilized microalgae for wastewater treatment remains unclear, which hinders its practical application. Thus, comprehensively understanding and evaluating details on immobilized microalgae is urgently needed, especially for the current advances of immobilization of microalgae in wastewater treatment over the last few decades. In this review, scientometric approach is used to explore research hotspots and visualize emerging trends. Data-driven analysis is used to scientifically and methodically determine hotspots in the current research on immobilized microalgal wastewater treatment, along with that the implicit inner connection underlying the frequent co-occurring terms was explored in depth. Four hotspots focusing on immobilized microalgae for wastewater treatment were identified, mainly demonstrating: (1) main factors including light, temperature and immobilization methods would majorly affect the treatment performance of immobilized microalgae; (2) immobilized microalgae membrane bioreactor, immobilized microalgae-based microbial fuel cell and immobilized microalgae-based bed reactor are three dominant treatment systems; (3) immobilized microalgae have a higher robustness and tolerance for treating various types of wastewater; and (4) a complete sustainable circle from wastewater treatment to resource conversion via the immobilized microalgae can be achieved. Finally, several new directions and new perspectives that expose the necessity for fulfilling further research and fundamental gaps are pointed out. Taken together, this review provides helpful information to facilitate the development of innovative and feasible immobilized microalgal technologies thus increasing their viability and sustainability.

Gd-Co nanosheet arrays coated on N-doped carbon spheres as cathode catalyst in photosynthetic microalgae microbial fuel cells

Biocompatible, durable and high catalytic cathode is crucial for the performance of photosynthetic microalgae microbial fuel cell (PMMFC). In this study, gadolinium-cobalt (Gd-Co) nanosheet arrays were coated on N-doped carbon spheres (N-CSs) that were supported using nickel foam (NF), to form a unique 3D hierarchical architecture of Gd-Co@N-CSs/NF cathode material. The morphology and structure of Gd-Co@N-CSs/NF was investigated by physicochemical characterization. The electricity generation and stability of NF, N-CSs/NF, Co@N-CSs/NF and Gd-Co@N-CSs/NF were evaluated using a dual-chamber PMMFC system with Chlorella vulgaris (C. vulgaris) in the cathode chamber. Results showed that doption of Gd to the cathode material resulted in Gd-Co@N-CSs/NF exhibiting superior catalytic activity for the oxygen reduction reaction (ORR), with an ORR peak potential of 0.78 V (vs. RHE). The electron transfer number (n) of Gd-Co@N-CSs/NF was 3.906, indicating ORR was mainly realized via 4e^- transfer pathway. Gd-Co@N-CSs/NF achieved a maximum power density of 115.9 mW m^-2 and an open circuit voltage of 614.8 mV, higher than the other three cathode materials. Gd-Co@N-CSs/NF exhibited excellent stability during 360 h of the PMMFC process, only dropping 5.8 % of maximum voltage. The cell density of C. vulgaris (3.7 × 10¹⁰ cells L^-1) in Gd-Co@N-CSs/NF system was significantly higher than those of NF, N-CSs/NF and Co@N-CSs/NF. This study shows that Gd-Co@N-CSs/NF is a promising cathode material and may be highly beneficial for the enhancement of PMMFC systems.

Mechanisms and application of microalgae on removing emerging contaminants from wastewater: A review

This study reviews the development of the ability of microalgae to remove emerging contaminants (ECs) from wastewater. Contaminant removal by microalgae-based systems (MBSs) includes biosorption, bioaccumulation, biodegradation, photolysis, hydrolysis, and volatilization. Usually, the existence of ECs can inhibit microalgae growth and reduce their removal ability. Therefore, three methods (acclimation, co-metabolism, and algal-bacterial consortia) are proposed in this paper to improve the removal performance of ECs by microalgae. Finally, due to the high removal performance of contaminants from wastewater by algal-bacterial consortia systems, three kinds of algal-bacterial consortia applications (algal-bacterial activatedsludge, algal-bacterial biofilm reactor, and algal-bacterial constructed wetland system) are recommended in this paper. These applications are promising for ECs removal. But most of them are still in their infancy, and limited research has been conducted on operational mechanisms and removal processes. Extra research is needed to clarify the applicability and cost-effectiveness of hybrid processes.

Enhancement of the immobilization on microalgae protective effects and carbamazepine removal by Chlorella vulgaris

Carbamazepine (CBZ) has drawn extensive attention due to their environmental threats. In this study, polyvinyl alcohol-sodium alginate polymers to immobilize Chlorella vulgaris (FACHB-8) were used to investigate whether immobilization can facilitate microalgae to alleviate the CBZ stress and enhance CBZ removal. The results showed that after immobilized treatment, the biomass of microalgae increased by approximately 20%, the maximum level of malondialdehyde content decreased from 28 to 13 μmol/g, and the photosynthetic capacity of F_V/F_M recovered to 90% of the control group. The CBZ removal rate increased from 67 to 84% by immobilization at a CBZ concentration of 80 mg·L^-1. The results indicated that immobilization technology can effectively protect microalgae from CBZ toxicity and improve the removal of CBZ, especially at high concentrations (> 50 mg/L). Biodegradation was the dominant pathway for microalgae to remove carbamazepine. This study added the understanding of the microalgae responses under immobilization and the interactions between immobilized microalgae and CBZ removal, thereby providing a novel insight into microalgae technology in high concentration wastewater treatments.

Recent progress on converting CO2 into microalgal biomass using suspended photobioreactors

Inhomogeneous light distribution and poor CO₂ transfer capacity are two critical concerns impeding microalgal photosynthesis in practical suspended photobioreactors (PBRs). To provide valuable guidance on designing high-performance PBRs, recent progress on enhancing light and CO₂ availabilities is systematically summarized in this review. Particularly, for the first time, the strategies on elevating light availability are classified and discussed from the perspectives of increasing incident light intensity, introducing internal illumination, optimizing flow field, regulating biomass concentrations, and enlarging illumination surface areas. Meanwhile, the strategies on enhancing CO₂ light availability are outlined from the aspects of generating smaller bubbles, extending bubbles residence time, and facilitating CO₂ dissolution using extra additives. Given the microalgal biomass production using current PBRs are still suffering from low productivity and economic feasibility, the possible future directions for PBRs implementation and development are presented. Altogether, this review is beneficial to furthering development of PBRs as a practical technology.

Mechanism and performance of algal pond assisted constructed wetlands for wastewater polishing and nutrient recovery

The limitation of oxygen and carbon source restricted the TN removal in constructed wetland (CW). Algal pond (AP) could produce oxygen and fix CO₂ to improve C/N ratio in water. Therefore, an AP-CW system was established under laboratory conditions to deeply explore the effect of nutrient load distribution and microalgae addition in CWs on pollutant removal. This study showed that AP-CW could remove 49.7% TN and 90.0% TP with no carbon addition in CWs. The significant removal of NH₄-N by AP advanced the location of denitrification in CWs. To enhance TN removal, different dosage of microalgae were intermittently added at 20 and 10 cm respectively below the inlet of the vertical flow CW1 and CW2, where the rest NH₄-N has been almost oxidized into nitrate. The addition of microalgae influenced the microflora and effluent quality. Microalgae dosage in denitrification area significantly increased the absolute abundance of Σnir. The best TN removal of AP-CW could reach 91.3% when 8 g (dry weight) microalgae was added. However, unlike previous knowledge, microalgae as an organic carbon source would also release N and P during decomposition, leading to increased nutrients in the effluent. The optimal dosage of microalgae was 1 g/5 d in this study. The position and amount of microalgae addition in CWs should be adjusted based on water property and element flow to achieve the best pollutant removal and biomass harvest.

Bifunctional lighting/supporting substrate for microalgal photosynthetic biofilm to bio-remove ammonia nitrogen from high turbidity wastewater

Treatment technologies based on microalgal biofilms have an enormous potential for dealing with water pollution because they can efficiently redirect nutrients from wastewater to renewable biomass feedstock. However, poor light transmittance is caused by the high turbidity of wastewater, which hinders the commercial application of microalgal biofilm-based wastewater treatment. Here, a bifunctional substrate with lighting and biofilm support functions was constructed using a light guide plate. In a biofilm photobioreactor (bPBR) with a bifunctional lighting/supporting substrate (BL/S substrate), light can directly irradiate the biofilm to avoid attenuation by the turbid wastewater. Direct irradiation of light onto the biofilm led to a 93.0% enhancement of microalgal photoconversion efficiency when compared to that of a supporting substrate without lighting (SO substrate). Meanwhile, the maximum growth rate of the microalgal biofilm on the BL/S substrate was 8.7 g m^-2 d^-1, which was increased by 60.3%. The removal rate of ammonia nitrogen (NH₄⁺-N) from the digested wastewater contributed by the microalgal biofilm reached 22.6 mg L^-1 d^-1, which was higher than the previously reported that of NH₄⁺-N from turbid digested wastewater by the biofilms. Furthermore, the BL/S substrate can facilitate the secretion of abundant extracellular polymeric substrates, which results in the stable adhesion of the biofilm onto the BL/S substrate. The optical density of the microalgae cells at the outlet of the bPBR with BL/S substrate was below 0.1, which was 94% lower than that of the bPBR with the SO substrate. The results indicated the BL/S substrate may avoid the loss of microalgal biomass, and almost all biomass could be easily harvested from the biofilm for algae-based biomass resources. Consequently, this study can offer a promising alternative with efficient treatment technologies for wastewater with high turbidity.

Biogranulation process facilitates cost-efficient resources recovery from microalgae-based wastewater treatment systems and the creation of a circular bioeconomy

Energy self-sufficient wastewater treatment designs can reduce net energy consumption and achieve resources recovery. Microalgae are regarded as a promising candidate for developing a circular bioeconomy in wastewater treatment plants (WWTPs) due to its potential for simultaneous wastewater remediation and high value-added materials production. Much effort has been made to overcome the high production costs for microalgae; however, biomass harvesting still remains as the bottleneck for its large-scale application. In this study, the novel biogranulation system facilitating easier and faster microalgae harvesting was firstly compared with the conventional suspended culture for energy-efficiency and sustainability assessment on microalgae (Ankistrodesmus falcatus var. acicularis) cultivation using the synthetic anaerobic digestion liquor. Results demonstrated that the biogranulation system enhanced volumetric biomass productivity (223.17 ± 11.82 g/m³/day) by about 4.4 times compared to that from the suspended system (41.57 ± 2.08 g/m³/day) under the same environmental conditions. It was noticed that lipids, carbohydrates and proteins were accumulated in microalgae cells along with nutrients remediation, and the microalgae granules with much higher proteins content (313.28 ± 26.67 mg/g-VSS) could be easily harvested through 2 min gravity sedimentation with little impact on the contents of carbohydrates and lipids. In the whole cultivation and harvesting process, the biomass mass-based electricity consumption and footprint demand by the biogranulation system were reduced by 58% and 76%, respectively. Results from this study provide a cost-effective and sustainable approach for microalgae in the treatment of nutrients rich digestion liquor with simultaneous production of valuable biomaterials.

Sustainable microalgal biomass production in food industry wastewater for low-cost biorefinery products: a review

Microalgae are recognized as cell factories enriched with biochemicals suitable as feedstock for bio-energy, food, feed, pharmaceuticals, and nutraceuticals applications. The industrial application of microalgae is challenging due to hurdles associated with mass cultivation and biomass recovery. The scale-up production of microalgal biomass in freshwater is not a sustainable solution due to the projected increase of freshwater demands in the coming years. Microalgae cultivation in wastewater is encouraged in recent years for sustainable bioeconomy from biorefinery processes. Wastewater from the food industry is a less-toxic growth medium for microalgal biomass production. Traditional wastewater treatment and management processes are expensive; hence it is highly relevant to use low-cost wastewater treatment processes with revenue generation through different products. Microalgae are accepted as potential biocatalysts for the bioremediation of wastewater. Microalgae based purification of wastewater technology could be a universal alternative solution for the recovery of resources from wastewater for low-cost biomass feedstock for industry. This review highlights the importance of microalgal biomass production in food processing wastewater, their characteristics, and different microalgal cultivation methods, followed by nutrient absorption mechanisms. Towards the end of the review, different microalgae biomass harvesting processes with biorefinery products, and void gaps that tend to hinder the biomass production with future perspectives will be intended. Thus, the review could claim to be valuable for sustainable microalgae biomass production for eco-friendly bioproduct conversions.

Graphical abstract

Bioremediation of phenolic pollutants by algae - current status and challenges

Industrial production processes, especially petroleum processing, will produce high concentration phenolic wastewater. Traditional wastewater treatment technology is costly and may lead to secondary pollution. In order to avoid the adverse effects of incompletely treated phenolics, more advanced methods are required. Algae bioremediate phenolics through green pathways such as adsorption, bioaccumulation, biodegradation, and photodegradation. At the same time, the natural carbon fixation capacity of algae and its potential to produce high-value products make algal wastewater treatment technology economically feasible. This paper reviews the environmental impact of several types of phenolic pollutants in wastewater and different strategies to improve bioremediation efficiency. This paper focuses on the progress of algae removing phenols by different mechanisms and the potential of algae biomass for further biofuel production. This technology holds great promise, but more research on practical wastewater treatment at an industrial scale is needed in the future.

Revealing the synergistic effects of cells, pigments, and light spectra on light transfer during microalgae growth: A comprehensive light attenuation model

As the sole energy for photosynthesis, light decrease rapidly with path due to absorption by pigments and scattering by cells in microalgal suspensions. By comprehensively considering cell concentrations, pigment components, and light spectra, a modified Cornet model for light transmission in microalgal suspensions is established. The developed model better fits experimental data with a higher adjusted R², which is 5% higher than the model that is based only on cell concentration. The attenuation of blue light is the most severe, followed by red and green light. Among the three main pigments, total carotenoids contribute the most to the absorption of blue and green light (with contribution coefficients of 89.26 ± 4.53% and 46.04 ± 3.77%, respectively), and chlorophyll a contributes the most to the absorption of red light (with a contribution coefficient of 75.33 ± 5.08%). This study provides a better understanding and prediction of light transmission during microalgal cultivation.

Microalgal bioremediation of heavy metal pollution in water: Recent advances, challenges, and prospects

With the rapid economy development and population surge, the water resources available for direct use on the earth have been in shortage. Therefore, water pollution remediation inevitably becomes the focus of global attention. Aside from their capacity to fix and effectively control the emission of carbon dioxide thus achieve negative carbon emission, microalgae and its products modified by genetic engineering and other technologies also have a broad prospect in sewage treatment such as efficiently removing all kinds of pollutants in water and producing high-quality biofuels after use. Therefore, research on these organisms has gradually deepened in recent years. This paper summarizes the bioremediation mechanism of heavy metal ions in water by using microalgae and their modified products. The relevant research progresses since 2015 are critically reviewed and discussed. Challenges and prospects are also put forward for their industrial implementation.

Microalgae Chlorella vulgaris and Scenedesmus dimorphus co-cultivation with landfill leachate for pollutant removal and lipid production

In this study, landfill leachate was pre-treated with NaClO, and then diluted to 5%, 10% and 15% for microalgae growth of Chlorella vulgaris and Scenedesmus dimorphus in the mono- and co-culture modes to investigate the nutrient removal and growth characteristics of microalgae. The results revealed that landfill leachate with the 10% dilution rate was conducive for microalgae growth and exhibited robust biomass growth and the highest nutrient removal efficiency. The co-culture biomass in 10% landfill leachate achieved 0.266 g/L within 10 days and demonstrated the improved nutrient utilisation efficiency of microalgae. In addition, the chemical oxygen demand, ammonia nitrogen, total nitrate and total phosphorus removal efficiencies accordingly reached 81.0%, 80.1%, 72.1% and 86.0% in 10% landfill leachate. Meanwhile, both the enzyme activity and fluorescence parameters proved that the cell activity of co-culture was higher than that of mono-culture.

Bio-removal of PtCl62- complex by Galdieria sulphuraria

Bio-removal of negative charged platinum complex is of great challenge owing to electrostatic repulsions between PtCl₆^2- and general extracellular polymeric substance (EPS) of microorganism. Galdieria sulphuraria (GS) are thermophilic and acidophilic microalga with specific metabolism, which subsequently lead to their unique cellular compositions such as EPS and phycocyanin, possibly providing a strategy to deal with negative charged metal complex. Accordingly, G. sulphuraria are employed to remove negative charged PtCl₆^2- complex with initial concentrations ranging from 0, 10, 20, 30, to 45 ppm. The growth rates of G. sulphuraria with microalgae named as GS-0, GS-10, GS-20, GS-30, and GS-45, respectively, and simultaneously bio-removal efficiencies of PtCl₆^2- are investigated. G. sulphuraria are independent to PtCl₆^2- within 0-30 ppm, while they are inhibited within 45 ppm of PtCl₆^2-. The PtCl₆^2- removal efficiencies of GS-10, GS-20, and GS-30 increase from 94.58%, 95.52%, to 95.92%, while decrease to 71.81% of GS-45. About 92.39%, 93.77%, 94.29%, and 75.21% of PtCl₆^2- adsorbed are accumulated within GS-10, GS-20, GS-30, GS-45, with few in EPS. The PtCl₆^2- complexes accumulated in EPS and algae cells are possibly decomposed to PtCl₄ according to the increasing zeta potentials of EPS and algae cells. The results indicate that PtCl₆^2- is efficiently removed by G. sulphuraria, achieving bio-removal of negative charged PtCl₆^2- complex from wastewater.

Mitigation of self-shading effect in embedded optical fiber in Chlorella sorokiniana immobilized polyvinyl alcohol gel beads

The addition of optical fibers to improve light penetration into microalgae-immobilized poly (vinyl) alcohol (PVA) gel beads is proposed herein. Live/dead staining in combination with confocal laser scanning microscopy analysis revealed greater light penetration in Chlorella sorokiniana-immobilized PVA gel beads with optical fibers (PVA-OF) than in C. sorokiniana-immobilized PVA gel beads (PVA-NOF). The improved light penetration had positive effects on the initial nutrient removal efficiency, which resulted in a 1.2-fold higher initial nutrient removal efficiency in PVA-OF than in PVA-NOF. The use of polymeric PVA materials is effective for maintaining structural integrity. The findings demonstrate a methodology for mitigating self-shading effects in microalgae immobilized on opaque polymeric materials.

Carbon dots enhance the recovery of microalgae bioresources from wastewater containing amoxicillin

The cultivation of microalgae using wastewater could bring some major economic benefits; however, the toxics in wastewater typically lead to a reduction in bioresource production. In this study, carbon dots (CDs) could enhance the photosynthetic activity of Chlorella under antibiotic stress because they might optimize photoluminescence by red-shifting incident light. Adding of 1 mg/L CDs increased the specific growth rate of Chlorella by 36.0% (day 8-13) and 52.7% (day 14-18) and significantly increased photosystems II activity. This treatment also increased amoxicillin removal by 18.6%. Thus, the toxicity of residuals was significantly eliminated (P < 0.05). The removal of nitrogen and phosphorous was increased by 14.6% and 9.9%, respectively. The production of pigments, lipids and proteins was increased by 16.6%, 19.5% and 24.8%, respectively. This work provided a new strategy of using CDs to mediate the coupling of microalgal bioresources production and toxic wastewater purification.

Methods of Encapsulation of Biomacromolecules and Living Cells. Prospects of Using Metal–Organic Frameworks

The review discusses different methods of encapsulation and biomineralization of macromolecules and living cells. Main advantages and disadvantages of most commonly used carriers, matrices, and materials for immobilization of proteins, enzymes, nucleic acids, and living cells are briefly surveyed. Examples of delivery vehicles for multifunctional encapsulation of protein-like substances are presented. Particular attention is paid to prospects of using metal–organic frameworks in medicine and biotechnology.

Substrate properties as controlling parameters in attached algal cultivation

There is growing interest in attached algae cultivation systems because they could provide a more cost- and energy-efficient alternative to planktonic (suspended algae) cultivation systems for many applications. However, attached growth systems have been far less studied than planktonic systems and have largely emphasized algae strains of most interest for biofuels. New algal biorefinery pathways have assessed the commercial potentials of algal biomass beyond biofuel production and placed more emphasis on value-added products from that biomass. Therefore, algal strain selection criteria and biomass cultivation methods need to be updated to include additional strains for improved efficiency. One possible way of improving attached cultivation systems is through engineering substrate surface characteristics to boost algal adhesion and enable strain selective algal colonization and growth. This review explores the effect of substrate chemical and topographical characteristics on the cultivation of attached algae. It also highlights the importance of considering algal community structure and attachment mechanisms in investigating attached algae systems using the example of filamentous algae found in algal turf scrubber (ATS™) systems. KEY POINTS : • Attached algal cultivation is a promising alternative to planktonic cultivation. • Performance increase results from tuning surface qualities of attachment substrates. • Attachment adaptation of periphytic algae has innate potential for cultivation.

Immobilization altering the growth behavior, ammonium uptake and amino acid synthesis of Chlorella vulgaris at different concentrations of carbon and nitrogen

Nitrogen recycling by microalgae has aroused considerable attention. In this study, immobilized Chlorellavulgaris with 5-day mixotrophic cultivation to recover ammonium (NH₄⁺-N) were systematically investigated under various sodium acetate (CH₃COONa) and ammonium chloride (NH₄Cl) concentrations, and evaluated by comparison with suspended cells. The results revealed that, unlike suspended cells, NH₄⁺-N uptake by immobilized cells was not in direct proportion to chemical oxygen demand (COD) concentrations. The immobilized cells to NH₄⁺-N uptake was all inferior to that of suspended cells, presenting the maximum rate of 68.92% in group of 30 mg/L NH₄⁺-N and 200 mg/L COD. Free amino acids in immobilized cells such as glutamate (Glu), arginine (Arg), proline (Pro) and leucine (Leu) were more sensitive to NH₄⁺-N assimilation, as higher values observed by suspended cells. Low carbon-nitrogen (C/N) ratio showed remarkable benefits to amino acid synthesis. These results could provide a reference for manipulating the algal system and biomass accumulation.

Biodegradation of Doxylamine From Wastewater by a Green Microalga, Scenedesmus obliquus

Pharmaceutical contaminants (PCs) have been recognized as emerging contaminants causing unexpected consequences to environment and humans. There is an urgent need for development of efficient technologies to treat these PCs from water. The current study has investigated the removal capacity of a green microalgal species, Scenedesmus obliquus, for doxylamine, chemical oxygen demand (COD), and nutrients from real wastewater. Results have indicated that S. obliquus can grow well in the doxylamine-polluted wastewater with the achievement of 56, 78.5, 100, and 89% removal of doxylamine, COD, total nitrogen (TN), and total phosphorus (TP). Addition of 2 g L^-1 bicarbonate enhanced the removal of doxylamine up to 63% and slightly inhibited the removal of COD. Decreased carbohydrate (28-26%) and increased protein content (30-33%) of the harvested biomass have been observed after cultivation in the wastewater. The current study has shown the feasibility of using microalgae-based biotechnologies for PC-contaminated wastewater.