Characterization and mechanism analysis of tylosin biodegradation and simultaneous ammonia nitrogen removal with strain Klebsiella pneumoniae TN-1

Glutamicibacter nicotianae AT6: A new strain for the efficient biodegradation of tilmicosin

The degradation of tilmicosin (TLM), a semi-synthetic 16-membered macrolide antibiotic, has been receiving increasing attention. Conventionally, there are three tilmicosin degradation methods, and among them microbial degradation is considered the best due to its high efficiency, eco-friendliness, and low cost. Coincidently, we found a new strain, Glutamicibacter nicotianae sp. AT6, capable of degrading high-concentration TLM at 100 mg/L with a 97% removal efficiency. The role of tryptone was as well investigated, and the results revealed that the loading of tryptone had a significant influence on TLM removals. The toxicity assessment indicated that strain AT6 could efficiently convert TLM into less-toxic substances. Based on the identified intermediates, the degradation of TLM by AT6 processing through two distinct pathways was then proposed.

Antibiotics and antibiotic resistance gene dynamics in the composting of antibiotic fermentation waste - A review

Fate of antibiotics and antibiotic resistance genes (ARGs) during composting of antibiotic fermentation waste (AFW) is a major concern. This review article focuses on recent literature published on this subject. The key findings are that antibiotics can be removed effectively during AFW composting, with higher temperatures, appropriate bulking agents, and suitable pretreatments improving their degradation. ARGs dynamics during composting are related to bacteria and mobile genetic elements (MGEs). Higher temperatures, suitable bulking agents and an appropriate C/N ratio (30:1) lead to more efficient removal of ARGs/MGEs by shaping the bacterial composition. Keeping materials dry (moisture less than 30%) and maintaining pH stable around 7.5 after composting could inhibit the rebound of ARGs. Overall, safer utilization of AFW can be realized by optimizing composting conditions. However, further removal of antibiotics and ARGs at low levels, degradation mechanism of antibiotics, and spread mechanism of ARGs during AFW composting require further investigation.

Microwave-assisted one-pot preparation of magnetic cactus-derived hydrochar for efficient removal of lead(Ⅱ) and phenol from water: Performance and mechanism exploration

A novel magnetic hydrochar derived from cactus cladode (MW-MHC) was successfully synthesized through one-pot microwave-assisted process for efficiently removing lead(Pb)(Ⅱ) and phenol. From batch adsorption experiments, MW-MHC possessed the highest uptake amounts for Pb(Ⅱ) and phenol of 139.34 and 175.32 mg/g within 20 and 60 min, respectively. Moreover, the removal of Pb(Ⅱ) and phenol by MW-MHC remained essentially stable under the interference of different co-existing cations, presenting the excellent adaptability of MW-MHC. After three cycles of regeneration experiments, MW-MHC still had preferable adsorption performance and could be easily recycled, indicating its excellent reusability. Significantly, the uptake mechanisms of Pb(Ⅱ) on MW-MHC were regarded as chemical complexation, pore filling, precipitation, and electrostatic attraction. Meanwhile, the phenol uptake might be dominated by π-π interaction and hydrogen bonding. The above consequences revealed that MW-MHC with high removal performance was a promising adsorbent for remediating wastewater containing heavy metals and organics.

Enhanced treatment of synthetic wastewater by bioaugmentation with a constructed consortium

Bioaugmentation by adding well-functioning mixed microorganism consortia represents a potentially useful approach to improve contaminant removal in wastewater treatment plants (WWTPs). However, unfavorable environmental conditions (i.e., low temperatures) can severely inhibit microbial activity, drawing our attention to constructing cold-tolerant microorganism preparations and investigating their availability in practical applications. Here we screened four in situ functional isolates from the activated sludge of secondary sedimentation tanks in WWTPs to construct a psychrophilic microbial consortium, which was used to perform bioaugmentation for enhanced removal of nitrogen and phosphorus under low temperatures. The consortium was established by cocultivation of four isolates, characterized by 16 S rRNA as the COD-degrading bacterium Aeromonas sp. Z3, aerobic denitrifying bacterium Acinetobacter sp. HF9, nitrifying bacterium Klebsiella sp. X8, and polyphosphate-accumulating bacterium Pseudomonas sp. PC5 respectively. The microorganism preparation was composed of Z3, HF9, X8, and PC5 under the ratio of 1: 1: 3: 1, which can exert optimal pollutant removal under the conditions of 12 °C, 6.0-9.0 pH, 120-200 r‧min-1, and a dosage of 5% (V/V). A 30-day continuous operation of the bioaugmented and control sequencing batch reactors (SBRs) was investigated, and the bioaugmented SBR showed a shorter start-up stage and a more stable operating situation. Compared to the control SBR, the COD, NH4+-N, TN, and TP removal efficiency of the bioaugmented SBR increased by an average of 7.95%, 9.05%, 9.54%, and 7.45% respectively. The analysis of the microbial community revealed that the introduced isolates were dominant in the activated sludge and that functional taxa such as Proteobacteria, Bacteroidota, and Actinobacteria were further enriched after a period of bioaugmentation. The study provides some basis and guidance for the practical application of how to strengthen the stable operation of WWTPs under low temperatures.

One-step self-assembly of Fe-biochar composite for enhanced persulfate activation to phenol degradation: Different active sites-induced radical/non-radical mechanism

Persulfate (PS) activation by nanoscale zerovalent iron (nZVI) is promising for water purification, while is limited due to its easy agglomeration and oxidation. Herein, nZVI encapsuled in carbon matrix shell was synthesized via one-step carbothermal reduction. The core-shell structure effectively inhibited oxidation and agglomeration of nZVI core, and graphitized porous structures facilitated phenol binding with maximal adsorption capacity of 117.10 mg/g achieved by nZVI_0.6-BC₈₀₀. Both reactive oxygen species (SO₄^•-, O•H, O₂^•- and ¹O₂) and electron transfer process resulted in phenol decomposition. Owing to diversified active sites, the nZVI_0.6-BC₈₀₀/PS system could completely degrade phenol degradation within short time, and exhibited great adaptation to extensive pH range (3.0-9.0) and coexisting substances. Additionally, the nZVI_0.6-BC₈₀₀/PS system could maintain over 85% removal of phenol after three recycles or 50 days of storage, and was highly-efficient to different water environments, thus proposing rational design of iron-carbon catalyst with potential in water treatment.

The capability of chloramphenicol biotransformation of Klebsiella sp. YB1 under cadmium stress and its genome analysis

Co-contamination by antibiotics and heavy metal is common in the environment, however, there is scarce information about antibiotics biodegradation under heavy metals stress. In this study, Klebsiella sp. Strain YB1 was isolated which is capable of biodegrading chloramphenicol (CAP) with a biodegradation efficiency of 22.41% at an initial CAP of 10 mg L^-1 within 2 days. CAP biodegradation which fitted well with the first-order kinetics. YB1 still degrades CAP under Cd stress, however 10 mg L^-1 Cd inhibited CAP biodegradation by 15.1%. Biotransformation pathways remained the same under Cd stress, but two new products (Cmpd 19 and Cmpd 20) were identified. Five parallel metabolism pathways of CAP were proposed with/without Cd stress, including one novel pathway (pathway 5) that has not been reported before. In pathway 5, the initial reaction was oxidation of CAP by disruption of C-C bond at the side chain of C1 and C2 with the formation of 4-nitrobenzyl alcohol and CY7, then these intermediates were oxidized into p-nitrobenzoic acid and CY1, respectively. CAP acetyltransferase and nitroreductase and 2,3/4,5-dioxygenase may play an important role in CAP biodegradation through genome analysis and prediction. This study deepens our understanding of mechanism of antibiotic degradation under heavy metal stress in the environment.

Biodegradation of cefalexin by two bacteria strains from sewage sludge

Bioremediation has been used as an environmentally-friendly, energy-saving and efficient method for removing pollutants. However, there have been very few studies focusing on the specific antibiotic-degrading microorganisms in the activated sludge and their degradation mechanism. Two strains of cefalexin-degrading bacteria (Rhizobium sp. (CLX-2) and Klebsiella sp. (CLX-3)) were isolated from the activated sludge in this study. They were capable of rapidly eliminating over 99% of cefalexin at an initial concentration of 10 mg l^-1 within 12 h. The exponential phase of cefalexin degradation happened a little earlier than that of bacterial growth. The first-order kinetic model could elucidate the biodegradation process of cefalexin. The optimized environmental temperature and pH values for rapid biodegradation by these two strains were found to be 30°C and 6.5-7, respectively. Furthermore, two major biodegradation metabolites of CLX-3, 7-amino-3-cephem-4-carboxylic acid and 2-hydroxy-3-phenyl pyrazine were identified using UHPLC-MS and the biodegradation pathway of cefalexin was proposed. Overall, the results showed that Rhizobium sp. (CLX-2) and Klebsiella sp. (CLX-3) could possibly be useful resources for antibiotic pollution remediation.

Hydrothermal carbonization of alfalfa: role of processing variables on hydrochar properties

Hydrothermal carbonization of alfalfa is a potential way to reuse agricultural waste. However, the effects of hydrothermal conditions on the properties of alfalfa-derived hydrochar are not clear. Herein, this study investigated the impact of different synthesis conditions (e.g., heating temperature, heating time, and solid to liquid ratio) on the formation and properties of hydrochar. Characterization and thermogravimetric analysis results revealed that with the increase of hydrothermal temperature and the extension of time, cellulose in alfalfa broken down more completely, and the number of carbon spheres and the aromatization degree increased, while the functional groups decreased. Furthermore, there was a surge in the carbon content, fixed carbon yield, high heating value, reduced oxygen, and volatile content. Additionally, the enhancement solid-liquid ratio could effectively improve the energy and mass yields. In all, by adjusting the process parameters of hydrochar, cleaner and higher productivity products could be obtained. This study provides theory basis for the production of target hydrochar that is used to soil amendments, adsorbents, and energy sources in the future.

Simultaneous reductions in antibiotic, antibiotic resistance genes and nitrogen loss during bioaugmentation tylosin fermentation dregs co-composting

Considering the main problems presented in the typical solid wastes antibiotic fermentation dregs (AFDs) composting that the residual antibiotics could result in the propagation of antibiotic resistance genes (ARGs), and the reduced value of agronomic production caused by the ammonia gas (NH₃) emissions. This study established a bio-augmented tylosin fermentation dregs (TFDs) aerobic co-composting system to investigate the effects of a novel isolated high-efficiency strain Klebsiella sp. TN-1 inoculation on tylosin degradation, reduction in ammonia emissions, and ARG abundances during this process. Results showed that the application of strain Klebsiella sp. TN-1 extended the thermophilic stage and promoted compost maturity. Moreover, bio-enhanced co-composting with strain Klebsiella sp. TN-1 led to a totally degradation of tylosin, and removed most of ARGs, metal resistance genes (MRGs) and mobile genetic elements (MGEs), and also effectively reduce ammonia emission by 49.76 %.via increasing ammoxidation rates. Principal co-ordinates analysis further suggested that the strain Klebsiella sp. TN-1 had little influence on the bacterial community composition, while the changes of other physical and chemical properties during this process were the main reasons for the evolution of bacterial community and propagation of ARGs in the TFDs co-composting. This study suggests the potential of the bio-enhanced strain Klebsiella sp. TN-1 for antibiotic biodegradation and its application for nitrogen conservation in the AFDs co-composting process, which could decrease the risk of ARGs spreading and make compost products more secure.

One-Step Synthesis of Nitrogen-Doped Porous Biochar Based on N-Doping Co-Activation Method and Its Application in Water Pollutants Control

In this work, birch bark (BB) was used for the first time to prepare porous biochars via different one-step methods including direct activation (BBB) and N-doping co-activation (N-BBB). The specific surface area and total pore volume of BBB and N-BBB were 2502.3 and 2292.7 m²/g, and 1.1389 and 1.0356 cm³/g, respectively. When removing synthetic methyl orange (MO) dye and heavy metal Cr⁶⁺, both BBB and N-BBB showed excellent treatment ability. The maximum adsorption capacities of BBB and N-BBB were 836.9 and 858.3 mg/g for MO, and 141.1 and 169.1 mg/g for Cr⁶⁺, respectively, which were higher than most previously reported biochar adsorbents. The probable adsorption mechanisms, including pore filling, π-π interaction, H-bond interaction, and electrostatic attraction, supported the biochars' demonstrated high performance. In addition, after five recycles, the removal rates remained above 80%, which showed the high stability of the biochars. This work verified the feasibility of the one-step N-doping co-activation method to prepare high-performance biochars, and two kinds of biochars with excellent performance (BBB and N-BBB) were prepared. More importantly, this method provides new directions and ideas for the development and utilization of other biomasses.

Microwave-assisted synthesis of polyethylenimine-grafted nanocellulose with ultra-high adsorption capacity for lead and phosphate scavenging from water

Herein, polyethylenimine-grafted nanocellulose (PEI_MW@NC_MW) was synthetized through microwave-assisted synthesis, which was employed for Pb(II) and phosphate scavenging from water. Characterization results exhibited that the original pomegranate peel-derived cellulose could be transformed to nanometer level by microwave radiation and the amino groups were successfully grafted on the nanocellulose evenly. The adsorption performance of PEI_MW@NC_MW possessed outstanding improvements over that of original nanocellulose with maximum adsorption capacities reaching 916.02 mg/g for Pb(II) and 278.89 mg/g for phosphate. Furthermore, the PEI_MW@NC_MW had high tolerance to various co-existing ions and could maintain over 94% removal efficiency during four regeneration cycles. Additionally, the Pb(II) uptake onto PEI_MW@NC_MW was associated with electrostatic attraction, complexation and pore-filling, whereas high phosphate capture was achieved via H-bonding, complexation and electrostatic attraction. In summary, PEI_MW@NC_MW was deemed as a potential adsorbent with excellent adsorption capacity for remediation of Pb(II) and phosphate polluted water.

One-step preparation of Fe/N co-doped porous biochar for chromium(VI) and bisphenol a decontamination in water: Insights to co-activation and adsorption mechanisms

Herein, magnetic nitrogen doped porous biochar (Fe/N-PBC) was prepared by mixing KHCO₃, K₂FeO₄ and CO(NH₂)₂ through one-step pyrolysis, and was employed for adsorbing Cr(VI) and BPA in water. The whole co-activated process was accompanied with pore-forming, carbon thermal reduction and element doping. Specifically, the developed microporous structures and high surface area of Fe/N-PBC (1093.68 m²/g) were achieved under synergistic activation of KHCO₃ and K₂FeO₄. Meanwhile, carbon thermal reduction process successfully converted K₂FeO₄ to Fe⁰ with introduction of heterocyclic-N (pyrrolic N and pyridinic N) structures by CO(NH₂)₂ doping. Fe/N-PBC exhibited outstanding uptake for Cr(VI) (340.96 mg/g) and BPA (355.14 mg/g), and possessed favorable regeneration properties after three cycles. Notably, the high-performance Cr(VI) removal was associated to reduction, electrostatic interaction, complexation, pore filling and ion exchange, while pore filling, hydrogen-bonding interaction and π-π stacking were responsible for BPA binding. This work presents reasonable design of Fe/N-carbon materials for Cr(VI)/BPA polluted water remediation.

Ball milling potassium ferrate activated biochar for efficient chromium and tetracycline decontamination: Insights into activation and adsorption mechanisms

Herein, novel Fe-biochar composites (MBC_BM500 and MBC_BM700) were synthesized through K₂FeO₄ co-pyrolysis and ball milling, and were used to eliminate Cr(VI)/TC from water. Characterization results revealed that higher temperature promoted formation of zero-valent iron and Fe₃C on MBC_BM700 through carbothermal reduction between K₂FeO₄ and biochar. The higher specific surface area and smaller particle size of MBC_BM500/700 stemmed from the corrosive functions of K and the ball milling process. And the maximal uptake amount of MBC_BM700 for Cr(VI)/TC was 117.49/90.31 mg/g, relatively higher than that of MBC_BM500 (93.86/84.15 mg/g). Furthermore, ion exchange, pore filling, precipitation, complexation, reduction and electrostatic attraction were proved to facilitate the adsorption of Cr(VI), while hydrogen bonding force, pore filling, complexation and π-π stacking were the primary pathways to eliminate TC. This study provide a reasonable design of Fe-carbon materials for Cr(VI)/TC contained water remediation, which required neither extra modifiers nor complex preparation process.

Pinecone-derived magnetic porous hydrochar co-activated by KHCO3 and K2FeO4 for Cr(VI) and anthracene removal from water

Herein, magnetic porous pinecone-derived hydrochar (MPHC_MW) co-activated by KHCO₃ and K₂FeO₄ through one-step microwave-assisted pyrolysis was innovatively synthesized for hexavalent chromium (Cr(VI)) and anthracene (ANT) removal from water. The analyses of characterization consequences and co-activation mechanisms not merely proved the high specific surface area (703.97 m²/g) and remarkable microporous structures of MPHC_MW caused by the synergistic chemical activation of KHCO₃ and K₂FeO₄, but also testified successful loading of Fe⁰ and Fe₃O₄ on MPHC_MW by the process of carbothermal reduction between K₂FeO₄ and carbon matrix of hydrochar. The resultant MPHC_MW possessed pH-dependence for Cr(VI), while adsorption for ANT was hardly impacted by the pH of solution. Moreover, the adsorption processes of MPHC_MW could attain equilibrium within 60 min for Cr(VI) and 30 min for ANT with multiple kinetics, and the corresponding adsorption capacity for Cr(VI) and ANT was 128.15 and 60.70 mg/g, respectively. Additionally, the adsorption percentages of MPBC_MW for Cr(VI)/ANT was maintained at 87.87/82.64% after three times of adsorption-desorption cycles. Furthermore, pore filling, complexation, electrostatic interaction, reduction and ion exchange were testified to enhance the removal of Cr(VI), while the ANT removal was achieved via π-π stacking, complexation, pore filling and hydrogen bonding force.

Concurrent elimination and stepwise recovery of Pb(II) and bisphenol A from water using β-cyclodextrin modified magnetic cellulose: adsorption performance and mechanism investigation

Coexistence of heavy metals and endocrine disrupting compounds in polluted water with competitive adsorption behavior necessitates design of tailored adsorbents. In this work, β-cyclodextrin modified magnetic rice husk-derived cellulose (β-CD@MRHC) which can provide independent functional sites for effectively binding the above two types of contaminants was synthesized and used for Pb(II) and BPA elimination in both unit and multivariate systems. Characterizations results confirmed successful β-CD grafting and Fe₃O₄ loading, and the β-CD@MRHC had excellent magnetic property for its effectively recovery from water, which was not affected by the adsorption of pollutants. The β-CD@MRHC possessed superior adsorption performance with maximal Pb(II)/BPA uptake of 266.2 or 412.8 mg/g, severally, and the adsorption equilibrium was fleetly reached in 30 and 7.5 min. Moreover, the β-CD@MRHC could accomplish synergetic Pb(II) and BPA elimination through averting their competitive behaviors owing to diverse capture mechanisms for Pb(II) (ion exchange, complexation and electrostatic attraction) and BPA (hydrogen bonding and host-guest inclusion). Furthermore, after three cycles of step-wise desorption, the binding of Pb(II) as well as BPA byβ-CD@MRHC dropped slightly in dualistic condition. In summary, β-CD@MRHC was a promising tailored adsorbent to practical application for simultaneously removing heavy metals and organic matters from wastewater with high-performance magnetic recovery.

Integrated meta-omics study on rapid tylosin removal mechanism and dynamics of antibiotic resistance genes during aerobic thermophilic fermentation of tylosin mycelial dregs

For efficient treatment of tylosin mycelial dregs (TMDs), rapid tylosin removal mechanism and dynamics of ARGs during TMDs fermentation were investigated using integrated meta-omics (genomics, metaproteomics and metabolomics) and qPCR approaches. The results showed that over 86% of tylosin was degraded on day 7 regardless of the type of bulking agents. The rapid removal of tylosin was mainly attributed to de-mycarose reaction (GH3) and esterase hydrolysis (C7MYQ7) of Saccharomonospora, and catalase-peroxidase oxidation of Bacillus (A0A077JB13). In addition, the moisture content and mobile genetic elements were vital to control the rebound of ARGs. The removal efficiency of antibiotic resistant bacteria (Streptomyces, Pseudomonas, norank_f__Sphingobacteriaceae, and Paenalcaligenes) and Intl1 (98.8%) in fermentation treatment TC21 with corncob as the bulking agent was significantly higher than that in other three treatments (88.3%). Thus, appropriate bulking agents could constrain the abundance of antibiotic resistant bacteria and Intl1, which is crucial to effectively reduce the resistance.

Effective lead passivation in soil by bone char/CMC-stabilized FeS composite loading with phosphate-solubilizing bacteria

Bioremediation by phosphate-solubilizing bacteria (PSB) has attracted extensive attentions due to its economical and eco-friendly properties for lead (Pb) passivation in soil. Herein, bone char (BC) supported biochemical composite (CFB₁-P) carrying advantages of BC, PSB, iron sulfide (FeS) and carboxymethyl cellulose (CMC) was designed and applied to Pb passivation. The composite at a mass ratio of BC:CMC:FeS = 1:1:1 possessed high passivation efficiency (65.47%), and has been demonstrated to offer appropriate habitat environment for PSB to defend against Pb(II) toxicity, thus enhancing the phosphate-solubilizing amount of PSB to 140.72 mg/L for passivating Pb(II). Batch experiments showed that the CFB₁-P possessed excellent adsorption properties with maximal monolayer Pb(II) uptake of 452.99 mg/g during an extensive pH range of 2.0-6.0. Furthermore, by applying CFB₁-P dosage of 3% into Pb-contaminated soil, the labile Pb fractions were reduced from 29.05% to 6.47% after simulated remediation of 10 days, and converted into steady fractions. The CFB₁-P was demonstrated to achieve high Pb(II) passivation through combined functions of chemical precipitation, complexation, electrostatic attraction and biomineralization, accompanied by the formation of more stable crystal structures, for instance, Pb₅(PO₄)₃OH, Pb₃(PO₄)₂ and PbS. These results suggested CFB₁-P as a potential alternative for efficient remediation of Pb-contaminated soil.

Microfluidic aqueous two-phase system-based nitrifying bacteria encapsulated colloidosomes for green and sustainable ammonium-nitrogen wastewater treatment

A novel strategy was proposed for preparing micro-scale monodisperses nitrifying bacteria (NB) encapsulated Ca-Alg@CaCO₃ colloidosomes by exploiting capillary microfluidic device, as an attempt to treat ammonium-nitrogen wastewater in an environment-friendly, efficient and repeatable manner based on the aqueous two-phase (ATPS) system. By complying with the spatial confined urease mediate biomineralization reactions, ATPS droplets (Dextran in Polyethylene glycol) containing urease, NB regent and alginate were used as templates to prepare 500 μm Ca-Alg@CaCO₃ colloidosomes with 16.48 Mpa mechanical strength. The activity of NB encapsulated in the colloidosomes was high. The simulated wastewater treated with the colloidosomes achieved a high removal rate even at harsh temperature and pH value. In both simulated and real wastewater treatment, prolonged reuse times (216 h) with high removal rate (＞90%, after being applied 72 h) were obtained by using Ca-Alg@CaCO₃ colloidosomes, as compared with that (96 h) by using general alginate microbeads.

Magnetic porous biochar with high specific surface area derived from microwave-assisted hydrothermal and pyrolysis treatments of water hyacinth for Cr(Ⅵ) and tetracycline adsorption from water

Magnetic porous water hyacinth-derived biochar (MPBC_MW3) was synthesized via two-step Microwave (MW)-assisted processes. Characterization results not only testified high specific surface area (2097.50 m²/g) of the MPBC_MW3 assisted by MW-assisted pyrolysis, but also revealed its favorable magnetism derived from MW-assisted hydrothermal process. The MPBC_MW3 possessed pH-dependent monolayer adsorption capacities of 202.61 and 202.62 mg/g for Cr(VI) and TC with quick attainments of uptake equilibrium within 150 and 200 min. Moreover, the Cr(VI) and TC uptake were substantially steady under the interference from multifarious co-existing ions with slight decline after three adsorption-desorption cycles. Furthermore, the MPBC_MW3 was demonstrated to achieve excellent Cr(VI) binding primarily through complexation, electrostatic interaction, reduction and ion exchange, while presenting outstanding TC removal via pore filling, π-π stacking, hydrogen bonding force, electrostatic interaction and complexation. All these findings suggested the MPBC_MW3 synthesized by MW-assisted processes as an excellent adsorbent for purification of Cr(VI) and TC-contaminated water.

Removal of Cd(Ⅱ) and anthracene from water by β-cyclodextrin functionalized magnetic hydrochar: Performance, mechanism and recovery

Magnetic hydrochar modified by β-cyclodextrin (β-CD) described as β-CD@MHC was successfully synthesized and applied to simultaneous removal of cadmium (Cd) and anthracene (ANT). Characterizations attested the grafting of β-CD groups onto β-CD@MHC with excellent magnetism. Moreover, the β-CD@MHC could eliminate Cd(II) and ANT during an extensive pH scope, and presented fast adsorption equilibrium in 60 min and 80 min for Cd(II) and ANT, respectively. And the β-CD@MHC possessed prominent adsorption properties with maximum monolayer binding of 47.28 mg/g for Cd(II), and corresponding heterogeneous uptake of 60.27 mg/g concerning ANT. Furthermore, the β-CD@MHC could effectively avoid the competitive behavior between Cd(II) and ANT mainly due to complexation and electrostatic attraction effects for capturing Cd(II), and host-guest interaction in the removal of ANT. Additionally, the binding of Cd(II) and ANT onto β-CD@MHC dropped slightly after stepwise desorption, suggesting the β-CD@MHC as a high-performance adsorbent for heavy metals and PAHs elimination from wastewater.