Fast hydrothermal co-liquefaction of corn stover and cow manure for biocrude and hydrochar production

Valorization of Agriculture Residues into Value-Added Products: A Comprehensive Review of Recent Studies

Global agricultural by-products usually go to waste, especially in developing countries where agricultural products are usually exported as raw products. Such waste streams, once converted to "value-added" products could be an additional source of revenue while simultaneously having positive impacts on the socio-economic well-being of local people. We highlight the utilization of thermochemical techniques to activate and convert agricultural waste streams such as rice and straw husk, coconut fiber, coffee wastes, and okara power wastes commonly found in the world into porous activated carbons and biofuels. Such activated carbons are suitable for various applications in environmental remediation, climate mitigation, energy storage, and conversions such as batteries and supercapacitors, in improving crop productivity and producing useful biofuels.

Semi-continuous hydrothermal processing of pine sawdust for integrated production of fuels precursors and platform chemicals

This research reports data for the integrated obtaining of fermentable sugars (FSs), bio-oil (BO), and hydro-char (HC) - all fuel precursors - as well as platform chemicals (PCs - acetic, formic, and levulinic acid, besides furfural, and hydroxymethylfurfural) through semi-continuous hydrothermal processing of sawdust from pine wood. The influence of temperature (260, 300, and 340 °C) and the water-to-biomass ratio (25 and 50 g H2O (g biomass)-1) were the parameters considered to evaluate the mass yields, kinetic profiles, and BO properties. For FSs (and PCs), a detailed analysis considering the kinetic profiles of obtaining cellobiose, glucose, xylose, and arabinose is presented. For the conditions evaluated, a distinct behavior concerning the process parameters was observed, where 7.11 and 9.28 g (100 g biomass)-1 of FSs and PCs were synergistically obtained, respectively, after 30 min, 20 MPa, 260 °C, and 50 g H2O (g biomass)-1. Contextually, 17.59 g (100 g biomass)-1 of BO was obtained at 340 °C and the same water/biomass ratio. FTIR analysis of the BO samples suggested the presence of aldehydes, carboxylic acids, ketones, hydrocarbons, ethers as well as aromatic, alcohols, and nitrogenous compounds. Similar HC yields were achieved among the conditions analyzed, where 24.68 g (100 g biomass)-1 were obtained at 340 °C and 50 g H2O (g biomass)-1 for a higher heating value of 29.14 MJ kg-1 (1.5 times higher than the in natura biomass).

Study on the auxin-like activity of organic compounds extracted from corn waste hydrochar prepared by hydrothermal carbonization

This work studied the auxin-like activity of liquid and solid hydrochar from aboveground corn biomass prepared using hydrothermal carbonization (HTC). Understanding the action of organic compounds in regulating plant metabolism is important to develop strategies to improve plant growth and production. Bioassays were performed by testing liquid hydrochar concentrations in the range of 0.0557-5570.0 mg carbon L-1; and solid hydrochar (via extracted dissolved organic matter, DOM) in the range of 0.026-2600.0 mg carbon L-1, using seeds of Lactuca sativa. SEM, ATR-FTIR, and Py-GC/MS were applied to assess the effect of HTC on hydrochar production/composition. Liquid hydrochar presented an intense bioactivity, completely inhibiting the germination of testing seeds at higher concentrations. Liquid hydrochar also was considerably more bioactive. Py-GC/MS allowed the identification of the molecules involved in IAA-like effects: carboxylic acids (linear and aromatic) and amino acids. The concentration of more bioactive molecules, rather than their simple presence in the hydrochar fraction, determined the bio-stimulating effect, besides an excellent linear regression between the auxin-like effect and the concentration of active molecules.

A Comprehensive Hydrothermal Co-Liquefaction of Diverse Biowastes for Energy-Dense Biocrude Production: Synergistic and Antagonistic Effects

Hydrothermal co-liquefaction (co-HTL) is a promising technology to valorize binary or even ternary biowastes into bioenergy. However, the complex biochemical compositions and unclear synergistic effect prevent the development of this technology. Thus, this study explored a comprehensive co-HTL of representative biowastes to investigate the synergistic and antagonistic effects. An apparent synergistic effect on biocrude yield was observed when sewage sludge was co-liquefied with cow manure or wheat straw. Further, the co-HTL of sewage sludge-cow manure was investigated in a detailed manner. The highest yield (21.84 wt%) of biocrude, with a positive synergistic effect (11.37%), the highest energy recovery (47.48%), and a moderate biocrude HHV (34.31 MJ/kg) were achieved from co-HTL at 350 °C for 30 min. Hydrochar and gas products were also characterized to unravel the reaction pathways. Accordingly, this work indicates that sewage sludge co-liquefied with other biowastes can serve as a multi-purpose solution for biowaste treatment and bioenergy production.

A Review of Hydrothermal Liquefaction of Biomass for Biofuels Production with a Special Focus on the Effect of Process Parameters, Co-Solvents, and Extraction Solvents

Hydrothermal liquefaction is one of the common thermochemical conversion methods adapted to convert high-water content biomass feedstocks to biofuels and many other valuable industrial chemicals. The hydrothermal process is broadly classified into carbonization, liquefaction, and gasification with hydrothermal liquefaction conducted in the intermediate temperature range of 250–374 °C and pressure of 4–25 MPa. Due to the ease of adaptability, there has been considerable research into the process on using various types of biomass feedstocks. Over the years, various solvents and co-solvents have been used as mediums of conversion, to promote easy decomposition of the lignocellulosic components in biomass. The product separation process, to obtain the final products, typically involves multiple extraction and evaporation steps, which greatly depend on the type of extractive solvents and process parameters. In general, the main aim of the hydrothermal process is to produce a primary product, such as bio-oil, biochar, gases, or industrial chemicals, such as adhesives, benzene, toluene, and xylene. All of the secondary products become part of the side streams. The optimum process parameters are obtained to improve the yield and quality of the primary products. A great deal of the process depends on understanding the underlined reaction chemistry during the process. Therefore, this article reviews the major works conducted in the field of hydrothermal liquefaction in order to understand the mechanism of lignocellulosic conversion, describing the concept of a batch and a continuous process with the most recent state-of-art technologies in the field. Further, the article provides detailed insight into the effects of various process parameters, co-solvents, and extraction solvents, and their effects on the products’ yield and quality. It also provides information about possible applications of products obtained through liquefaction. Lastly, it addresses gaps in research and provides suggestions for future studies.