Exploring the feasibility of nitrous oxide reduction and polyhydroxyalkanoates production simultaneously by mixed microbial cultures

Effect of composition of volatile fatty acids on yield of polyhydroxyalkanoates and mechanisms of bioconversion from activated sludge

Polyhydroxyalkanoates (PHA) is green biodegradable natural polymer. Here PHA production from volatile fatty acids (VFAs) was investigated in sequential batch reactors inoculated with activated sludge. Single or mixed VFAs ranging from acetate to valerate were evaluated, and the dominant VFA concentration was 2 times of that of the others in the tests. Results showed that mixed substrates achieved about 1.6 times higher yield of PHA production than single substrate. The butyrate-dominated substrates maximized PHA content at 72.08% of VSS, and the valerate-dominated substrates were followed with PHA content at 61.57%. Metabolic flux analysis showed the presence of valerate in the substrates caused a more robust PHA production. There was at least 20% of 3-hydroxyvalerate in the polymer. Hydrogenophaga and Comamonas were the main PHA producers. As VFAs could be produced in anaerobic digestion of organic wastes, the methods and data here could be referred for efficient green bioconversion of PHA.

A plant wide simulation of polyhydroxyalkanoate production from wastewater and its conversion to methyl crotonate

This work simulates the production of methyl crotonate from various industrial wastewaters. In the upstream process, wastewater is fermented into volatile fatty acids which are then converted into polyhydroxyalkanoates (PHA) by means of mixed microbial cultures. In the downstream, PHA undergoes a series of thermolysis and esterification reactions to produce methyl crotonate. The origin of the wastewater was found to have a great influence on the composition of the PHA with the effluent of a candy bar factory producing a high polyhydroxybutyrate/polyhydroxyvalerate ratio of 86/14 in favour of methyl crotonate production. It was observed that the use of intracellular polyhydroxybutyrate, instead of purified, significantly lowers the number of separation steps and yet reduces the methyl crotonate recovery by only 20 %. An operating pressure higher than 18 bar led to more transesterification of polyhydroxybutyrate, producing byproducts instead of methyl crotonate. Finally, a 3 h reaction was found sufficient for completion of polyhydroxybutyrate conversion.

Nitrous oxide emission mitigation from biological wastewater treatment - A review

Nitrous oxide (N₂O) emitted from wastewater treatment processes has emerged as a focal point for academic and practical research amidst pressing environmental issues. This review presents an updated view on the biological pathways for N₂O production and consumption in addition to the critical process factors affecting N₂O emission. The current research trends including the strain and reactor aspects were then outlined with discussions. Last but not least, the research needs were proposed. The holistic life cycle assessment needs to be performed to evaluate the technical and economic feasibility of the proposed mitigation strategies or recovery options. This review also provides the background information for the proposed future research prospects on N₂O mitigation and recovery technologies. As pointed out, dilution effects of the produced N₂O gas product would hinder its use as renewable energy; instead, its use as an effective oxidizing agent is proposed as a promising recovery option.

Recovery of value-added products from biowaste: A review

This review provides an update on the state-of-the art technologies for the valorization of solid waste and its mechanism to generate various bio-products. The organic content of these wastes can be easily utilized by the microbes and produce value-added compounds. Microbial fermentation techniques can be utilized for developing waste biorefinery processes. The utilization of lignocellulosic and plastics wastes for the generation of carbon sources for microbial utilization after pre-processing steps will make the process a multi-product biorefinery. The C1 and C2 gases generated from different industries could also be utilized by various microbes, and this will help to control global warming. The review seeks to expand expertise about the potential application through several perspectives, factors influencing remediation, issues, and prospects.

Cyanophycin Granule Polypeptide: a Neglected High Value-Added Biopolymer, Synthesized in Activated Sludge on a Large Scale

Recovery of microbial synthetic polymers with high economic value and market demand in activated sludge has attracted extensive attention. This work analyzed the synthesis of cyanophycin granule peptide (CGP) in activated sludge and its adsorption capacity for heavy metals and dyes. The distribution and expression of synthetic genes for eight biopolymers in two wastewater treatment plants (WWTPs) were analyzed by metagenomics and metatranscriptomics. The results indicate that the abundance and expression level of CGP synthase (cphA) are similar to those of polyhydroxyalkanoate polymerase, implying high synthesis of CGP in activated sludges. CGP in activated sludge is mainly polymerized from aspartic acid and arginine, and its secondary structure is mainly β-sheet. The crude yields of CGP are as high as 104 ± 26 and 76 ± 13 mg/g dry sludge in winter and in summer, respectively, comparable to those of polyhydroxyalkanoate and alginate. CGP has a stronger adsorption capacity for anionic pollutants (Cr (VI) and methyl orange) than for cationic pollutants because it is rich in guanidine groups. This study highlights prospects for recovery and application of CGP from WWTPs. IMPORTANCE The conversion of organic pollutants into bioresources by activated sludge can reduce the carbon dioxide emission of wastewater treatment plants. Identification of new high value-added biopolymers produced by activated sludge is beneficial to recover bioresources. Cyanophycin granule polypeptide (CGP), first discovered in cyanobacteria, has unique chemical and material properties suitable for industrial food, medicine, cosmetics, water treatment, and agriculture applications. Here, we revealed for the first time that activated sludge has a remarkable ability to produce CGP. These findings could further facilitate the conversion of wastewater treatment plants into resource recycling plants.

Chronic effects of cerium dioxide nanoparticles on biological nitrogen removal and nitrous oxide emission: Insight into impact mechanism and performance recovery potential

The influence of cerium dioxide nanoparticles (CeO₂ NPs) on biological nitrogen removal and associated nitrous oxide (N₂O) emission has seldom been addressed yet. Herein, the chronic effect of CeO₂ NPs on the nitrogen transformation processes during wastewater treatment and the impacted system's self-recovery potential after CeO₂ NP stress removal were investigated. CeO₂ NP of 10-50 mg/L induced significant declines of the ammonia nitrogen (NH₄⁺-N) and the total nitrogen removal efficiencies, but triggered the nitrite accumulation and the N₂O emission. The N₂O reductase (NOS) activity was negatively correlated with the N₂O emission level, and the inhibition of NOS activity under CeO₂ NP stress was probably due to the depressions of the sludge denitrifiers' metabolic activities. The NH₄⁺-N removal efficiency was successfully regained after the recovery period although the N₂O emission level was still higher than the pre-exposure period, which was probably due to the residual CeO₂ NPs inside the activated sludge.