Reutilization of manganese enriched biochar derived from Phytolacca acinosa Roxb. residue after phytoremediation for lead and tetracycline removal

Environmental remediation potential of a pioneer plant (Miscanthus sp.) from abandoned mine into biochar: Heavy metal stabilization and environmental application

Pyrolysis stands out as an effective method for the disposal of phytoremediation residues in abandoned mines, yielding a valuable by-product, biochar. However, the environmental application of biochar derived from such residues is limited by the potential environmental risks of heavy metals. Herein, Miscanthus sp. residues from abandoned mines were pyrolyzed into biochars at varied pyrolysis temperatures (300-700 °C) to facilitate the safe reuse of phytoremediation residues. The results showed that pyrolysis significantly stabilizes heavy metals in biomass, with Cd exhibiting the most notable stabilization effect. Acid-soluble/exchangeable and reducible fractions of Cd decreased significantly from 69.91 % to 2.52 %, and oxidizable and residue fractions increased approximately 3.24 times at 700 °C. The environmental risk assessment indicated that biochar pyrolyzed over 500 °C pose lower environmental risk (RI < 30), making them optimal for the safe utilization of phytoremediation residues. Additionally, adsorption experiments suggested that biochars prepared at higher temperature (500-700 °C) exhibit superior adsorption capacity, attributed to alkalinity and precipitation effect. This study highlights that biochars produced by pyrolyzing Miscanthus sp. from abandoned mines above 500 °C hold promise for environmental remediation, offering novel insight into the reutilization of metal-rich biomass.

Endogenous iron-enriched biochar derived from steel mill wastewater sludge for tetracycline removal: Heavy metals stabilization, adsorption performance and mechanism

Steel mill wastewater sludge, as an iron-enriched solid waste, was expected to be converted into iron-enriched biochar with acceptable environmental risk by pyrolysis. The purpose of our study was to evaluate the chemical speciation transformation of heavy metals in biochar under various pyrolysis temperatures and its reutilization for tetracycline (TC) removal. The experimental data indicated that pyrolysis temperature was a key factor affecting the heavy metals speciation and bioavailability in biochar, and biochar with pyrolysis temperature at 450 °C was the most feasible for reutilization without potential risk. The endogenous iron-enriched biochar (FSB450) showed highly efficient adsorption towards TC, and its maximum adsorption capacity could reach 240.38 mg g-1, which should be attributed to its excellent mesoporous structure, abundant functional groups and endogenous iron cycling. The endogenous iron was converted to a stable iron oxide crystalline phase (Fe3O4 and MgFe2O4) by pyrolysis, which underwent a valence transition to form a coordination complex with TC by electron shuttling in the FSB450 matrix. The study provides a win-win approach for resource utilization of steel wastewater sludge and treatment of antibiotic contamination in wastewater.

Biochar from phytoremediation plant residues: a review of its characteristics and potential applications

Phytoremediation is a cost-effective and eco-friendly plant-based approach promising technique to repair heavy metal-contaminated soils. However, a significant quantity of plant residues needs to be properly treated and utilized. Pyrolysis is an effective technology for converting residues to biochar, which can solve the problem and avoid secondary contamination. This paper reviews the generation, and physicochemical properties of biochar from phytoremediation residues, and its application in soil improvement, environmental remediation, and carbon sequestration. In spite of this, it is important to be aware of the potential toxicity of heavy metals in biochar and the environmental risks of biochar before applying it to practical applications. Future challenges in the production and application of residue-derived biochar include the rational selection of pyrolysis parameters and proper handling of potentially hazardous components in the biochar.

Promising strategies of circular bioeconomy using heavy metal phytoremediated plants - A critical review

Phytoremediation is an excellent method for removing harmful heavy metals from the environment since it is eco-friendly, uses little energy, and is inexpensive. However, as phytoremediated plants can turn into secondary sources for heavy metals, complete heavy metal removal from phytoremediated plants is necessary. Elimination of toxic heavy metals from phytoremediated plants should be considered with foremost care. This review highlights about important sources of heavy metal contamination, health effects caused by heavy metal contamination and technological breakthroughs of phytoremediation. This review critically emphasis about promising strategies to be engaged for absolute reutilization of heavy metals and spectacular approaches of production of commercially imperative products from phytoremediated plants through circular bioeconomy with key barriers. Thus, phytoremediation combined with circular bioeconomy can create a new platform for the eco-friendly life.

The role of biochar in the photocatalytic treatment of a mixture of Cr(VI) and phenol pollutants: Biochar as a carrier for transferring and storing electrons

Biochar (BC) is widely used to remove environmental pollutants due to its photocatalytic activity. However, the mechanism of BC in photocatalysis remains unclear. In this study, soybean straw biochar (D500), dewatered sludge biochar (S500) and TiO₂/BC composite catalysts were prepared to test their photocatalytic activity in the photocatalysis-dark reaction using phenol and Cr(VI) as the representative pollutants. D500 had a good graphitized structure, layered structure and more active sites, which led to good photocatalytic activity. Compared with D500, S500 did not have a similar structure, resulting in a lack of photocatalytic activity. In addition, the efficiency of Cr(VI) and phenol removal using D500/TiO₂ as a catalyst was higher than that obtained using D500 and TiO₂, respectively. TiO₂ coupled with D500 increased the generation of photoexcited electrons and reduced the recombination of e^--h⁺ pairs. The removal efficiency of TiO₂/D500 for Cr(VI) (80.4 %) and phenol (77.7 %) in the hybrid systems was higher than that of Cr(VI) and phenol in unitary systems. This difference was mainly attributed to the inhibition of e^--h⁺ pair recombination by phenol and Cr(VI), which function as electron quenchers and hole quenchers, respectively. Furthermore, D500 stored electrons under light and released these electrons under dark conditions. When D500 was combined with TiO₂, the electrons on the biochar activated the catalytic redox activity of TiO₂, thereby removing pollutants under dark conditions. Meanwhile, TiO₂/D500 also exhibited good reusability and stability. In summary, this study provides new insight into the role of biochar in photocatalysis.