Alkaline hydrogen peroxide pretreatment combined with bio-additives to boost high-solids enzymatic hydrolysis of sugarcane bagasse for succinic acid processing

Fed-batch treatment attenuates diffusional limitation while preparing high solid microfibrillated cellulose from Gelidium amansii

This study investigates the effects of fed-batch treatment on the fibrillation degree and properties of Gelidium amansii-derived microfibrillated cellulose (MFC). Fed-batch milling was conducted with the initial solid loading of 1 % w/v followed by three stages of feeding to obtain a final solid concentration of 5 % w/v. This process provides a high-solid MFC of around 10 %, while batch milling only provides the maximum solid loading of 4 %. It also reduces approximately 83 % power consumption of batch milling at the same solid loading (4 %). The obtained MFC 5 % has lower fibrils length (14.9 µm) and width (16.46 nm), but higher consistency index (>250 Pa.s) than MFC 1 % (22 µm, 21 nm, 5.88 Pa.s). The crystallinity and maximum decomposition temperatures of both MFCs are comparable, varying at 49-53 % and 318 °C-320 °C. In summary, fed-batch treatment is promising for the techno-economic development of MFC production by lowering energy and maintaining product quality.

Advances in succinic acid production: the enhancement of CO2 fixation for the carbon sequestration benefits

Succinic acid (SA), one of the 12 top platform chemicals produced from biomass, is a precursor of various high value-added derivatives. Specially, 1 mol CO2 is assimilated in 1 mol SA biosynthetic route under anaerobic conditions, which helps to achieve carbon reduction goals. In this review, methods for enhanced CO2 fixation in SA production and utilization of waste biomass for SA production are reviewed. Bioelectrochemical and bioreactor coupling systems constructed with off-gas reutilization to capture CO2 more efficiently were highlighted. In addition, the techno-economic analysis and carbon sequestration benefits for the synthesis of bio-based SA from CO2 and waste biomass are analyzed. Finally, a droplet microfluidics-based high-throughput screening technique applied to the future bioproduction of SA is proposed as a promising approach.

Biosurfactant promoted enzymatic saccharification of alkali‑pretreated reed straw

The decrease of cellulase activity and unproductive adsorption of lignin are important obstructive factors for inefficient enzymatic hydrolysis. This paper applied five different kinds of biosurfactants including rhamnolipid, sophorolipid, chitin, tea saponin, and sodium lignosulfonate in the enzymatic hydrolysis process of alkali-pretreated reed straw (RS) to enhance the saccharification efficiency. When 8 g/L sophorolipid is added, the efficiency of enzymatic hydrolysis is 91.68 %, which is 30.65 % higher than that without using any biosurfactant. The efficiency of enzymatic hydrolysis can be further increased to 99.56 % when 7.5 g/L sophorolipid and 1.5 g/L tea saponin are added together. This is because the sophorolipid, rhamnolipid, and chitin can synergistically hamper the enzymatic inactivation during enzymatic hydrolysis, while tea saponin and sodium lignosulfonate can inhibit the non-productive adsorption of lignin. This work proposed a very effective method to improve the efficiency of enzymatic hydrolysis and reduce the dosage of the enzyme by adding biosurfactants.

Liquid hot water pretreatment combined with high-solids enzymatic hydrolysis and fed-batch fermentation for succinic acid sustainable processed from sugarcane bagasse

In order to sustainable process of bio-succinic acid (SA), response surface methodology (RSM) was applied to optimize liquid hot water pretreatment pretreatment of sugarcane bagasse (SCB), followed by high-solids enzymatic hydrolysis of pretreated residual that without washing, then the hydrolysates and partial pretreatment liquid were used as carbon sources for SA fermentation. Results showed that the highest sugars yield could be achieved at pretreatment conditions of temperature 186 °C, time 25 min and solid-to-liquid ratio 0.08; enzymatic digestion the pretreated residuals at 20 % (w/v) solid content via enzymes reconstruction and fed-batch strategy, the obtained sugars reached to 121 g/L; by controlling the nutrition and conditions of the fermentation process, most of the C5 and C6 sugars in the hydrolysate and pretreatment liquid were converted into SA with a conversion rate high to 280 mg/g SCB. This study can provide a novel clue for clean and efficient biorefining of chemicals.

Nature-inspired pretreatment of lignocellulose - Perspective and development

As sustainability gains increasing importance in addition to cost-effectiveness as a criterion for evaluating engineering systems and practices, biological processes for lignocellulose pretreatment have attracted growing attention. Biological systems such as white and brown rot fungi and wood-consuming insects offer fascinating examples of processes and systems built by nature to effectively deconstruct plant cell walls under environmentally benign and energy-conservative environments. Research in the last decade has resulted in new knowledge that advanced the understanding of these systems, provided additional insights into these systems' functional mechanisms, and demonstrated various applications of these processes. The new knowledge and insights enable the adoption of a nature-inspired strategy aiming at developing technologies that are informed by the biological systems but superior to them by overcoming the inherent weakness of the natural systems. This review discusses the nature-inspired perspective and summarizes related advancements, including the evolution from biological systems to nature-inspired processes, the features of biological pretreatment mechanisms, the development of nature-inspired pretreatment processes, and future perspective. This work aims to highlight a different strategy in the research and development of novel lignocellulose pretreatment processes and offer some food for thought.

Hydrolysis of lignocellulose to succinic acid: a review of treatment methods and succinic acid applications

Succinic acid (SA) is an intermediate product of the tricarboxylic acid cycle (TCA) and is one of the most significant platform chemicals for the production of various derivatives with high added value. Due to the depletion of fossil raw materials and the demand for eco-friendly energy sources, SA biosynthesis from renewable energy sources is gaining attention for its environmental friendliness. This review comprehensively analyzes strategies for the bioconversion of lignocellulose to SA based on the lignocellulose pretreatment processes and cellulose hydrolysis and fermentation principles and highlights the research progress on acid production and SA utilization under different microbial culture conditions. In addition, the fermentation efficiency of different microbial strains for the production of SA and the main challenges were analyzed. The future application directions of SA derivatives were pointed out. It is expected that this research will provide a reference for the optimization of SA production from lignocellulose.

Enzymes and enzymatic mechanisms in enzymatic degradation of lignocellulosic biomass: A mini-review

Enzymatic hydrolysis is the key step limiting the efficiency of the biorefinery of lignocellulosic biomass. Enzymes involved in enzymatic hydrolysis and their interactions with biomass should be comprehended to form the basis for looking for strategies to improve process efficiency. This article updates the contemporary research on the properties of key enzymes in the lignocellulose biorefinery and their interactions with biomass, adsorption, and hydrolysis. The advanced analytical techniques to track the interactions for exploiting mechanisms are discussed. The challenges and prospects for future research are outlined.

Technological advancements in valorization of second generation (2G) feedstocks for bio-based succinic acid production

Succinic acid (SA) is used as a commodity chemical and as a precursor in chemical industry to produce other derivatives such as 1,4-butaneidol, tetrahydrofuran, fumaric acid, and bio-polyesters. The production of bio-based SA from renewable feedstocks has always been in the limelight owing to the advantages of renewability, abundance and reducing climate change by CO₂ capture. Considering this, the current review focuses on various 2G feedstocks such as lignocellulosic biomass, crude glycerol, and food waste for cost-effective SA production. It also highlights the importance of producing SA via separate enzymatic hydrolysis and fermentation, simultaneous saccharification and fermentation, and consolidated bioprocessing. Furthermore, recent advances in genetic engineering, and downstream SA processing are thoroughly discussed. It also elaborates on the techno-economic analysis and life cycle assessment (LCA) studies carried out to understand the economics and environmental effects of bio-based SA synthesis.