1
|
Lin F, Li W, Wang D, Hu G, Qin Z, Xia X, Hu L, Liu X, Luo R. Advances in succinic acid production: the enhancement of CO 2 fixation for the carbon sequestration benefits. Front Bioeng Biotechnol 2024; 12:1392414. [PMID: 38605985 PMCID: PMC11007169 DOI: 10.3389/fbioe.2024.1392414] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/27/2024] [Accepted: 03/18/2024] [Indexed: 04/13/2024] Open
Abstract
Succinic acid (SA), one of the 12 top platform chemicals produced from biomass, is a precursor of various high value-added derivatives. Specially, 1 mol CO2 is assimilated in 1 mol SA biosynthetic route under anaerobic conditions, which helps to achieve carbon reduction goals. In this review, methods for enhanced CO2 fixation in SA production and utilization of waste biomass for SA production are reviewed. Bioelectrochemical and bioreactor coupling systems constructed with off-gas reutilization to capture CO2 more efficiently were highlighted. In addition, the techno-economic analysis and carbon sequestration benefits for the synthesis of bio-based SA from CO2 and waste biomass are analyzed. Finally, a droplet microfluidics-based high-throughput screening technique applied to the future bioproduction of SA is proposed as a promising approach.
Collapse
Affiliation(s)
| | | | - Dan Wang
- Department of Chemical Engineering, School of Chemistry and Chemical Engineering, Chongqing University, Chongqing, China
| | | | | | | | | | | | | |
Collapse
|
2
|
Peng XX, Gai S, Liu Z, Cheng K, Yang F. Effects of Fe 3+ on Hydrothermal Humification of Agricultural Biomass. ChemSusChem 2024; 17:e202301227. [PMID: 37833827 DOI: 10.1002/cssc.202301227] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/19/2023] [Revised: 09/15/2023] [Accepted: 10/13/2023] [Indexed: 10/15/2023]
Abstract
Hydrothermal humification technology for the preparation of artificial humic matters provides a new strategy, greatly promoting the natural maturation process. Iron, as a common metal, is widely used in the conversion of waste biomass; however, the influence of Fe3+ on hydrothermal humification remains unknown. In this study, FeCl3 is used to catalyze the hydrothermal humification of corn straw, and the influence of Fe3+ on the hydrothermal humification is explored by a series of characterization techniques. Results show that Fe3+ as the catalyst can promote the decomposition of corn straw, shorten the reaction time from 24 h to 6 h, and increase the yield from 6.77 % to 14.08 %. However, artificial humic acid (A-HA) obtained from Fe3+ -catalysis hydrothermal humification contains more unstable carbon and low amount of aromatics, resulting in a significantly decreased stability of the artificial humic acid. These results provide theoretical guidance for regulating the structure and properties of artificial humic acid to meet various maintenance needs.
Collapse
Affiliation(s)
- Xiong-Xin Peng
- School of Water Conservancy and Civil Engineering Department, Northeast Agricultural University, Harbin, 150030, China
- Heilongjiang Provincial International Joint Laboratory of Smart Soil, Harbin, 150030, China
| | - Shuang Gai
- School of Water Conservancy and Civil Engineering Department, Northeast Agricultural University, Harbin, 150030, China
- Heilongjiang Provincial International Joint Laboratory of Smart Soil, Harbin, 150030, China
| | - Zhuqing Liu
- School of Water Conservancy and Civil Engineering Department, Northeast Agricultural University, Harbin, 150030, China
- Heilongjiang Provincial International Joint Laboratory of Smart Soil, Harbin, 150030, China
| | - Kui Cheng
- Heilongjiang Provincial International Joint Laboratory of Smart Soil, Harbin, 150030, China
- College of Engineering, Northeast Agricultural University, Harbin, 150030, China
| | - Fan Yang
- School of Water Conservancy and Civil Engineering Department, Northeast Agricultural University, Harbin, 150030, China
- Heilongjiang Provincial International Joint Laboratory of Smart Soil, Harbin, 150030, China
| |
Collapse
|
3
|
Yildiz H, Gülşen H, Şahin Ö, Baytar O, Kutluay S. Novel adsorbent for malachite green from okra stalks waste: synthesis, kinetics and equilibrium studies. Int J Phytoremediation 2024; 26:369-381. [PMID: 37551855 DOI: 10.1080/15226514.2023.2243621] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 08/09/2023]
Abstract
In this study, malachite green (MG) removal was performed with activated carbon synthesized from okra stalks by microwave assisted chemical activation method. In the synthesis of activated carbon, the effects of gas in the microwave, activation, and impregnation rate were investigated. The synthesized activated carbon characterization was investigated using BET, FT-IR, and SEM analyses. The activated carbon surface area achieved was 759.453 m2 g-1. In addition, the surface area of activated carbon synthesized using the conventional method was17.766 m2 g-1. The effect of the initial solution concentration on MG adsorption was investigated. According to the kinetic and equilibrium data, it was found that the adsorption process best fitted the pseudo-second order kinetic model and the Langmuir isotherm. According to the equilibrium data, the maximum adsorption capacity (qmax) of the monolayer was 119.05 mg g-1. In addition, MG adsorption was investigated by the experimental design method. The adsorption capacity at the determined optimum conditions was 99.63 mg g-1. All results show that activated carbon synthesized from waste biomass by combining the conventional method with microwave-assisted impregnation is a cheap and environmentally friendly adsorbent.
Collapse
Affiliation(s)
- Hakan Yildiz
- Department of Environmental Technologies, Harran University, Sanlıurfa, Türkiye
| | - Hakki Gülşen
- Department of Environmental Engineering, Harran University, Sanlıurfa, Türkiye
| | - Ömer Şahin
- Department of Chemical Engineering, Istanbul Technical University, İstanbul, Türkiye
| | - Orhan Baytar
- Department of Chemical Engineering, Siirt University, Siirt, Türkiye
| | - Sinan Kutluay
- Department of Chemical Engineering, Istanbul Technical University, İstanbul, Türkiye
| |
Collapse
|
4
|
Hejna M, Świechowski K, Białowiec A. Study on the Effect of Hydrothermal Carbonization Parameters on Fuel Properties of Sewage Sludge Hydrochar. Materials (Basel) 2023; 16:6903. [PMID: 37959500 PMCID: PMC10648982 DOI: 10.3390/ma16216903] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 09/29/2023] [Revised: 10/21/2023] [Accepted: 10/25/2023] [Indexed: 11/15/2023]
Abstract
In the wake of economic and population growth, increased wastewater production poses a challenge related to sewage sludge treatment, which is problematic given its high moisture content, amount, and hazardous characteristics. This study focuses on the hydrothermal carbonization of sewage sludge to produce carbonous material-hydrochar, which may be an alternative to fossil fuels. The effect of process parameters, namely, temperature (180, 240, 300 °C) and duration time (30, 90, 180 min), on hydrochar properties (proximate and ultimate analysis, heating values) and process performance were studied. Obtained results indicate and confirm that hydrothermal carbonization, especially temperature increase, improves the fuel properties of carbonized sewage sludge. The highest low heating value was obtained for hydrochar derived at 300 °C in 180 min (~23 MJ × kg-1). The highest energy gain was noted for hydrochar derived at 240 °C in 180 min (~23%). As well as relatively high mass and energy yield in comparison to other hydrochars, these parameters are considered the most favorable for sewage sludge hydrothermal carbonization. However, high energy consumption (over 1300 kJ × g-1) suggests that more research on the process's economical efficacy is required.
Collapse
Affiliation(s)
| | | | - Andrzej Białowiec
- Department of Applied Bioeconomy, Wrocław University of Environmental and Life Sciences, 51-630 Wrocław, Poland; (M.H.); (K.Ś.)
| |
Collapse
|
5
|
Dygas D, Kręgiel D, Berłowska J. Sugar Beet Pulp as a Biorefinery Substrate for Designing Feed. Molecules 2023; 28:2064. [PMID: 36903310 PMCID: PMC10004680 DOI: 10.3390/molecules28052064] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/24/2023] [Revised: 02/20/2023] [Accepted: 02/20/2023] [Indexed: 02/25/2023] Open
Abstract
An example of the implementation of the principles of the circular economy is the use of sugar beet pulp as animal feed. Here, we investigate the possible use of yeast strains to enrich waste biomass in single-cell protein (SCP). The strains were evaluated for yeast growth (pour plate method), protein increment (Kjeldahl method), assimilation of free amino nitrogen (FAN), and reduction of crude fiber content. All the tested strains were able to grow on hydrolyzed sugar beet pulp-based medium. The greatest increases in protein content were observed for Candida utilis LOCK0021 and Saccharomyces cerevisiae Ethanol Red (ΔN = 2.33%) on fresh sugar beet pulp, and for Scheffersomyces stipitis NCYC1541 (ΔN = 3.04%) on dried sugar beet pulp. All the strains assimilated FAN from the culture medium. The largest reductions in the crude fiber content of the biomass were recorded for Saccharomyces cerevisiae Ethanol Red (Δ = 10.89%) on fresh sugar beet pulp and Candida utilis LOCK0021 (Δ = 15.05%) on dried sugar beet pulp. The results show that sugar beet pulp provides an excellent matrix for SCP and feed production.
Collapse
Affiliation(s)
- Dawid Dygas
- Department of Environmental Biotechnology, Lodz University of Technology, 171/173 Wólczańska Street, 90-530 Łódź, Poland
| | - Dorota Kręgiel
- Department of Environmental Biotechnology, Lodz University of Technology, 171/173 Wólczańska Street, 90-530 Łódź, Poland
| | - Joanna Berłowska
- Department of Environmental Biotechnology, Lodz University of Technology, 171/173 Wólczańska Street, 90-530 Łódź, Poland
| |
Collapse
|
6
|
Zhao C, Chen H, Wu X, Shan R. Exploiting the Waste Biomass of Durian Shell as a Heterogeneous Catalyst for Biodiesel Production at Room Temperature. Int J Environ Res Public Health 2023; 20:1760. [PMID: 36767129 PMCID: PMC9914276 DOI: 10.3390/ijerph20031760] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 12/26/2022] [Revised: 01/08/2023] [Accepted: 01/09/2023] [Indexed: 06/18/2023]
Abstract
Durian shell, a biomass waste, was simply burned and then could serve as a heterogeneous catalyst for the transesterification reaction of palm oil with methanol at room temperature. The chemical composition, structure, and morphology of the catalyst were well-characterized by XRD, BET, SEM, TEM, EDS, TGA, FT-IR, and XPS measurement. With the preparation temperature rising to 350 °C, the maximum yield of the biodiesel could reach 94.1% at room temperature, and the optimum reaction conditions were 8 wt.% catalyst, 8:1 methanol/oil molar ratio, ad 2.5 h reaction time. The characterizations results indicated that K2O and K2CO3 existed on the surface of catalyst, and a moderate amount of carbon, which acts as a carrier, attributed to the activity of the catalyst. After repeating five times, the catalyst prepared at 350 °C showed better stability than other catalysts. This might be because the incomplete combustion of the remaining carbon slowed down the loss of K to some extent.
Collapse
Affiliation(s)
- Che Zhao
- School of Naval Architecture and Maritime, Zhejiang Ocean University, Zhoushan 316022, China
| | - Hongyuan Chen
- Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou 510640, China
| | - Xiao Wu
- Fisheries College, Tianjin Agricultural University, Tianjin 300384, China
| | - Rui Shan
- Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou 510640, China
| |
Collapse
|
7
|
Wu M, Xu J, Zhang H, Xia W, Li W, Zhang W. Purification and Identification of Flavonoid Molecules from Rosa setate x Rosa rugosa Waste Extracts and Evaluation of Antioxidant, Antiproliferative and Antimicrobial Activities. Molecules 2022; 27:4379. [PMID: 35889252 DOI: 10.3390/molecules27144379] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 06/06/2022] [Revised: 06/30/2022] [Accepted: 07/06/2022] [Indexed: 11/24/2022]
Abstract
Rosa setate x Rosa rugosa is widely used in the essential oil industry and generates large amounts of waste annually. The purpose of this research is the recycling of bioactive flavonoids from rose waste biomass to develop high-value products. Resin screening and adsorption/desorption dynamic analysis showed that HP20 resin was suitable to purify the flavonoids from R. setate x R. rugosa waste extracts. Under the optimal enrichment process, the product had a 10.7-fold higher purity of flavonoids with a satisfactory recovery of 82.02%. In total, 14 flavonoids were identified in the sample after purification by UHPLC-QTOF-MS. Moreover, the DPPH and ABTS assays revealed that the flavonoids-purified extracts exhibited higher antioxidant activities than the crude extracts. Meanwhile, the purified extracts presented stronger antiproliferative activity against HepG2, Caco-2, MCF-7 and A549 cell lines. The bacteriostatic effects of the purified extracts against four bacteria (Staphylococcus aureus (S. aureus), Escherichia coli (E. coli), Staphylococcus epidermidis (S. epidermidis), Pseudomonas aeruginosa (P. aeruginosa)) and yeast (Candida albicans (C. albicans)) were stronger compared with the crude extracts. It was concluded that flavonoids-enriched extracts from R. setate x R. rugosa waste had the potential to be applied in functional food and pharmaceutical industries.
Collapse
|
8
|
Nair RR, Mondal MM, Srinivasan SV, Weichgrebe D. Biochar Synthesis from Mineral- and Ash-Rich Waste Biomass, Part 1: Investigation of Thermal Decomposition Mechanism during Slow Pyrolysis. Materials (Basel) 2022; 15:4130. [PMID: 35744189 DOI: 10.3390/ma15124130] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/29/2022] [Revised: 05/19/2022] [Accepted: 06/07/2022] [Indexed: 02/04/2023]
Abstract
Synthesizing biochar from mineral- and ash-rich waste biomass (MWB), a by-product of human activities in urban areas, can result in renewable and versatile multi-functional materials, which can also cater to the need of solid waste management. Hybridizing biochar with minerals, silicates, and metals is widely investigated to improve parent functionalities. MWB intrinsically possesses such foreign materials. The pyrolysis of such MWB is kinetically complex and requires detailed investigation. Using TGA-FTIR, this study investigates and compares the kinetics and decomposition mechanism during pyrolysis of three types of MWB: (i) mineral-rich banana peduncle (BP), (ii) ash-rich sewage sludge (SS), and (iii) mineral and ash-rich anaerobic digestate (AD). The results show that the pyrolysis of BP, SS, and AD is exothermic, catalyzed by its mineral content, with heat of pyrolysis 5480, 4066, and 1286 kJ/kg, respectively. The pyrolysis favors char formation kinetics mainly releasing CO2 and H2O. The secondary tar reactions initiate from ≈318 °C (BP), 481 °C (SS), and 376 °C (AD). Moreover, negative apparent activation energies are intrinsic to their kinetics after 313 °C (BP), 448 °C (SS), and 339 °C (AD). The results can support in tailoring and controlling sustainable biochar synthesis from slow pyrolysis of MWB.
Collapse
|
9
|
Pozio A, Di Carli M, Aurora A, Falconieri M, Della Seta L, Prosini PP. Hard Carbons for Use as Electrodes in Li-S and Li-ion Batteries. Nanomaterials (Basel) 2022; 12:nano12081349. [PMID: 35458062 PMCID: PMC9027466 DOI: 10.3390/nano12081349] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/12/2022] [Revised: 03/31/2022] [Accepted: 04/09/2022] [Indexed: 02/06/2023]
Abstract
Activated hard carbons, obtained from the pyrolysis of various waste biomasses, were prepared and characterized for use as the active material for the fabrication of battery electrodes. The preparation consisted of a pyrolysis process, followed by an activation with KOH and a further high-temperature thermal process. TG and DTA were used to discriminate the steps of the activation process, while SEM, XRD, and Raman characterization were employed to evaluate the effects of activation. The activated carbons were tested as electrodes in lithium-sulfur and lithium-ion batteries. The carbonaceous materials coming from cherry stones and walnut shells have proved to be particularly suitable as electrode components. When used as anodes in lithium-ion batteries, both carbons exhibited a high first cycle discharge capacity, which was not restored during the next charge. After the first two cycles, in which there was a marked loss of capacity, both electrodes showed good reversibility. When used as cathodes in lithium-sulfur batteries, both carbons exhibited good catalytic activity against the redox reaction involving sulfur species with good cycle stability and satisfactory Coulombic efficiency.
Collapse
Affiliation(s)
- Alfonso Pozio
- TERIN-PSU-ABI, ENEA, C.R. Casaccia, Via Anguillarese 301, S. Maria di Galeria, 00123 Rome, Italy; (A.P.); (M.D.C.); (A.A.); (L.D.S.)
| | - Mariasole Di Carli
- TERIN-PSU-ABI, ENEA, C.R. Casaccia, Via Anguillarese 301, S. Maria di Galeria, 00123 Rome, Italy; (A.P.); (M.D.C.); (A.A.); (L.D.S.)
| | - Annalisa Aurora
- TERIN-PSU-ABI, ENEA, C.R. Casaccia, Via Anguillarese 301, S. Maria di Galeria, 00123 Rome, Italy; (A.P.); (M.D.C.); (A.A.); (L.D.S.)
| | - Mauro Falconieri
- FSN-TECFIS, ENEA, C.R. Casaccia, Via Anguillarese 301, S. Maria di Galeria, 00123 Rome, Italy;
| | - Livia Della Seta
- TERIN-PSU-ABI, ENEA, C.R. Casaccia, Via Anguillarese 301, S. Maria di Galeria, 00123 Rome, Italy; (A.P.); (M.D.C.); (A.A.); (L.D.S.)
| | - Pier Paolo Prosini
- TERIN-PSU-ABI, ENEA, C.R. Casaccia, Via Anguillarese 301, S. Maria di Galeria, 00123 Rome, Italy; (A.P.); (M.D.C.); (A.A.); (L.D.S.)
- Correspondence: ; Tel.: +39-06-3048-6768
| |
Collapse
|
10
|
Kazimierski P, Januszewicz K, Godlewski W, Fijuk A, Suchocki T, Chaja P, Barczak B, Kardaś D. The Course and the Effects of Agricultural Biomass Pyrolysis in the Production of High-Calorific Biochar. Materials (Basel) 2022; 15:1038. [PMID: 35160983 DOI: 10.3390/ma15031038] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 11/07/2021] [Revised: 01/19/2022] [Accepted: 01/21/2022] [Indexed: 11/16/2022]
Abstract
The thermal pyrolysis of agriculture biomass has been studied in a fixed-bed reactor, where the pyrolysis was conducted at a steady temperature of 800 °C. This work analyses the pyrolysis products of six agricultural wastes: pistachio husks, walnut husks, sunflower hulls, buckwheat husks, corncobs and coconut shells. The conducted research compared examples of large waste biomass streams from different parts of the world as a potential source of renewable energy. Additionally, the kinetics of the reaction with the activation energy were analyzed and calculated for all raw materials in pyrolysis process. Biochars are characterised by higher combustion heat in comparison to the raw material samples. The average value of the heat of combustion increased due to pyrolysis process from 10 MJ/kg, with minimal value of 2.7 MJ/kg (corncob) and maximum of 13.0 MJ/kg for coconut, which is also characterised by the maximal absolute combustion heating value (32.3 MJ/kg). The increase in calorific values varied from 15% to 172% (with 54% reference for wood chips), which indicates that charring is an effective method for increasing the energy concentration. The obtained biochar were compared with wood chips, which are widely used solid fuel of organic origin. The studied biomass-derived fuels are characterised by lower ash contribution than wood. An analogous observation was made for the obtained biochars, whose ash contribution was lower than for the chips in terms of both unit-mass and unit-combustion-heat. The main advantage of this method is the production of solid fuel from biomass, which increases the calorific value and bulk density of biochar in comparison to raw material.
Collapse
|
11
|
Rajapaksha SW, Shimizu N. Development and Characterization of Functional Starch-Based Films Incorporating Free or Microencapsulated Spent Black Tea Extract. Molecules 2021; 26:3898. [PMID: 34202382 PMCID: PMC8271635 DOI: 10.3390/molecules26133898] [Citation(s) in RCA: 14] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/04/2021] [Revised: 06/22/2021] [Accepted: 06/23/2021] [Indexed: 12/25/2022] Open
Abstract
Antioxidant polyphenols in black tea residue are an underused source of bioactive compounds. Microencapsulation can turn them into a valuable functional ingredient for different food applications. This study investigated the potential of using spent black tea extract (SBT) as an active ingredient in food packaging. Free or microencapsulated forms of SBT, using a pectin-sodium caseinate mixture as a wall material, were incorporated in a cassava starch matrix and films developed by casting. The effect of incorporating SBT at different polyphenol contents (0.17% and 0.34%) on the structural, physical, and antioxidant properties of the films, the migration of active compounds into different food simulants and their performance at preventing lipid oxidation were evaluated. The results showed that adding free SBT modified the film structure by forming hydrogen bonds with starch, creating a less elastic film with antioxidant activity (173 and 587 µg(GAE)/g film). Incorporating microencapsulated SBT improved the mechanical properties of active films and preserved their antioxidant activity (276 and 627 µg(GAE)/g film). Encapsulates significantly enhanced the release of antioxidant polyphenols into both aqueous and fatty food simulants. Both types of active film exhibited better barrier properties against UV light and water vapour than the control starch film and delayed lipid oxidation up to 35 d. This study revealed that starch film incorporating microencapsulated SBT can be used as a functional food packaging to protect fatty foods from oxidation.
Collapse
Affiliation(s)
- Surakshi Wimangika Rajapaksha
- Laboratory of Agricultural Bio-System Engineering, Graduate School of Agriculture, Hokkaido University, Hokkaido 060-8589, Japan;
| | - Naoto Shimizu
- Research Faculty of Agriculture/Field Science Center for Northern Biosphere, Hokkaido University, Hokkaido 060-8589, Japan
| |
Collapse
|
12
|
Morreeuw ZP, Castillo-Quiroz D, Ríos-González LJ, Martínez-Rincón R, Estrada N, Melchor-Martínez EM, Iqbal HMN, Parra-Saldívar R, Reyes AG. High Throughput Profiling of Flavonoid Abundance in Agave lechuguilla Residue-Valorizing under Explored Mexican Plant. Plants (Basel) 2021; 10:plants10040695. [PMID: 33916866 PMCID: PMC8067008 DOI: 10.3390/plants10040695] [Citation(s) in RCA: 6] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 02/28/2021] [Revised: 03/30/2021] [Accepted: 04/01/2021] [Indexed: 02/05/2023]
Abstract
Agave lechuguilla waste biomass (guishe) is an undervalued abundant plant material with natural active compounds such as flavonoids. Hence, the search and conservation of flavonoids through the different productive areas have to be studied to promote the use of this agro-residue for industrial purposes. In this work, we compared the proportion of total flavonoid content (TFC) among the total polyphenolics (TPC) and described the variation of specific flavonoid profiles (HPLC-UV-MS/MS) of guishe from three locations. Descriptive environmental analysis, using remote sensing, was used to understand the phytochemical variability among the productive regions. Furthermore, the effect of extractive solvent (ethanol and methanol) and storage conditions on specific flavonoid recovery were evaluated. The highest TPC (16.46 ± 1.09 GAE/g) was observed in the guishe from region 1, which also had a lower normalized difference water index (NDWI) and lower normalized difference vegetation index (NDVI). In contrast, the TFC was similar in the agro-residue from the three studied areas, suggesting that TFC is not affected by the studied environmental features. The highest TFC was found in the ethanolic extracts (6.32 ± 1.66 QE/g) compared to the methanolic extracts (3.81 ± 1.14 QE/g). Additionally, the highest diversity in flavonoids was found in the ethanolic extract of guishe from region 3, which presented an intermedia NDWI and a lower NDVI. Despite the geo-climatic induced variations of the phytochemical profiles, the results confirm that guishe is a valuable raw material in terms of its flavonoid-enriched bioactive extracts. Additionally, the bioactive flavonoids remain stable when the conditioned agro-residue was hermetically stored at room temperature in the dark for nine months. Finally, the results enabled the establishment of both agro-ecological and biotechnological implications.
Collapse
Affiliation(s)
- Zoé P. Morreeuw
- Centro de Investigaciones Biológicas del Noroeste (CIBNOR), Instituto Politécnico Nacional 195, Playa Palo Santa Rita Sur, La Paz 23096, Mexico;
| | - David Castillo-Quiroz
- Instituto Nacional de Investigaciones Forestales, Agrícolas y Pecuarias (INIFAP), Campo Experimental Saltillo, Carretera Saltillo-Zacatecas 9515, Col. Hacienda Buenavista, Saltillo 25315, Mexico;
| | - Leopoldo J. Ríos-González
- Departamento de Biotecnología, Facultad de Ciencias Químicas, Universidad Autónoma de Coahuila (UAdeC), Blvd. V. Carranza, Republica Oriente, Saltillo 25280, Mexico;
| | - Raúl Martínez-Rincón
- Programa Catedra CONACYT-CIBNOR, Av. Instituto Politécnico Nacional 195, Playa Palo Santa Rita Sur, La Paz 23096, Mexico; (R.M.-R.); (N.E.)
| | - Norma Estrada
- Programa Catedra CONACYT-CIBNOR, Av. Instituto Politécnico Nacional 195, Playa Palo Santa Rita Sur, La Paz 23096, Mexico; (R.M.-R.); (N.E.)
| | | | - Hafiz M. N. Iqbal
- Tecnologico de Monterrey, School of Engineering and Sciences, Monterrey 64849, Mexico;
- Correspondence: (H.M.N.I.); (R.P.-S.); (A.G.R.)
| | - Roberto Parra-Saldívar
- Tecnologico de Monterrey, School of Engineering and Sciences, Monterrey 64849, Mexico;
- Correspondence: (H.M.N.I.); (R.P.-S.); (A.G.R.)
| | - Ana G. Reyes
- Programa Catedra CONACYT-CIBNOR, Av. Instituto Politécnico Nacional 195, Playa Palo Santa Rita Sur, La Paz 23096, Mexico; (R.M.-R.); (N.E.)
- Correspondence: (H.M.N.I.); (R.P.-S.); (A.G.R.)
| |
Collapse
|
13
|
Li M, Rui J, Liu D, Su F, Li Z, Qiao H, Wang Z, Liu C, Shan J, Li Q, Guo M, Fan N, Qian J. Liquid Transport in Fibrillar Channels of Ion-Associated Cellular Nanowood Foams. ACS Appl Mater Interfaces 2020; 12:58212-58222. [PMID: 33319989 DOI: 10.1021/acsami.0c17034] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/12/2023]
Abstract
A mechanical disintegration of waste wood biomass and freeze-induced assembly of colloidal nanowood were effectively deployed to explore ion-associated cellular foams (NWFs) with unidirectional channels. Under the assistance of inorganic ions, the as-fabricated foams were significantly enhanced in physical stability, compressive strength, flame retardancy, and thermal barrier, accounting for the tuning effects of pores and channels, surface charges, and microphase interaction by ion effects and freeze orientation. As a result, the vascular-like ion-doped channels benefited from quick capillary liquid transport. Under 1 sun illumination, NWF-V as a 3-D evaporator exhibited a high evaporation rate of 1.50 kg m-2 h-1 and a conversion efficiency of up to 88.9% for seawater desalination. Dramatically, an average of 12.5 kg m-2 of fresh water could be generated on each sunny day by outdoor NWFs for durability beyond 15 days. Under the drive of fuel combustion, an efficient conveying of ethanol or pump oil could be at rates of 0.44 and 0.26 mL min-1, respectively. Moreover, combustion flame with variable color was generated according to the doping cations in NWFs. Therefore, sustainable, green, facile, and multifunctional wood-based cellular foams could be tailored, scaled-up, and applied as color flame burners or desalination evaporators under combustion or solar drive in the energy and environment fields.
Collapse
Affiliation(s)
- Minyu Li
- Jiangsu Key Laboratory of Atmospheric Environment Monitoring and Pollution Control, Collaborative Innovation Center of Atmospheric Environment and Equipment Technology, School of Environment Science & Engineering, Nanjing University of Information Science & Technology, Nanjing 210044, China
| | - Jilong Rui
- Jiangsu Key Laboratory of Atmospheric Environment Monitoring and Pollution Control, Collaborative Innovation Center of Atmospheric Environment and Equipment Technology, School of Environment Science & Engineering, Nanjing University of Information Science & Technology, Nanjing 210044, China
| | - Dagang Liu
- Jiangsu Key Laboratory of Atmospheric Environment Monitoring and Pollution Control, Collaborative Innovation Center of Atmospheric Environment and Equipment Technology, School of Environment Science & Engineering, Nanjing University of Information Science & Technology, Nanjing 210044, China
| | - Fan Su
- Jiangsu Key Laboratory of Atmospheric Environment Monitoring and Pollution Control, Collaborative Innovation Center of Atmospheric Environment and Equipment Technology, School of Environment Science & Engineering, Nanjing University of Information Science & Technology, Nanjing 210044, China
| | - Zehui Li
- State Key Joint Laboratory of Environment Simulation and Pollution Control, School of Environment, Tsinghua University, Beijing 10084, China
| | - Huanhuan Qiao
- Biomass Molecular Engineering Center, Anhui Agricultural University, Hefei, Anhui 230036, China
| | - Zhongkai Wang
- Biomass Molecular Engineering Center, Anhui Agricultural University, Hefei, Anhui 230036, China
| | - Chang Liu
- Jiangsu Key Laboratory of Atmospheric Environment Monitoring and Pollution Control, Collaborative Innovation Center of Atmospheric Environment and Equipment Technology, School of Environment Science & Engineering, Nanjing University of Information Science & Technology, Nanjing 210044, China
| | - Jiaqi Shan
- Jiangsu Key Laboratory of Atmospheric Environment Monitoring and Pollution Control, Collaborative Innovation Center of Atmospheric Environment and Equipment Technology, School of Environment Science & Engineering, Nanjing University of Information Science & Technology, Nanjing 210044, China
| | - Qin Li
- Jiangsu Key Laboratory of Atmospheric Environment Monitoring and Pollution Control, Collaborative Innovation Center of Atmospheric Environment and Equipment Technology, School of Environment Science & Engineering, Nanjing University of Information Science & Technology, Nanjing 210044, China
| | - Mengna Guo
- Jiangsu Key Laboratory of Atmospheric Environment Monitoring and Pollution Control, Collaborative Innovation Center of Atmospheric Environment and Equipment Technology, School of Environment Science & Engineering, Nanjing University of Information Science & Technology, Nanjing 210044, China
| | - Ning Fan
- Biomass Molecular Engineering Center, Anhui Agricultural University, Hefei, Anhui 230036, China
| | - Jun Qian
- Jiangsu Key Laboratory of Atmospheric Environment Monitoring and Pollution Control, Collaborative Innovation Center of Atmospheric Environment and Equipment Technology, School of Environment Science & Engineering, Nanjing University of Information Science & Technology, Nanjing 210044, China
| |
Collapse
|
14
|
Brunerová A, Roubík H, Brožek M, Van Dung D, Phung LD, Hasanudin U, Iryani DA, Herák D. Briquetting of sugarcane bagasse as a proper waste management technology in Vietnam. Waste Manag Res 2020; 38:1239-1250. [PMID: 32686610 DOI: 10.1177/0734242x20938438] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/11/2023]
Abstract
The present research describes an application of high-pressure briquetting technology to the waste management of sugarcane processing in Vietnam. The amount of generated sugarcane bagasse was monitored during sugarcane processing within the street juice production in Hue city, Vietnam. Generated sugarcane bagasse was subjected to fuel parameters analysis within its suitability for direct combustion. The obtained sugarcane bagasse was converted into bio-briquette fuel by a high-pressure briquetting press and its mechanical quality was determined. Results proved that the proportion of generated sugarcane bagasse from whole sugarcane stem mass was equal to 35.45%. This indicated generation of an abundant amount of sugarcane bagasse worldwide in general. Fuel parameters analysis proved high quality level of low ash content = 0.97% and high calorific values (gross calorific value = 18.35 MJ·kg-1, net calorific value = 17.06 MJ·kg-1), which indicated good suitability for direct combustion processes. Indicators of mechanical quality proved the following observations: mechanical durability = 99.29%, compressive strength = 150.82 N∙mm-1 and bulk density = 1022.44 kg·m-3, with all these indicators representing positive results. In general, the observed results indicated suitability of sugarcane bagasse valorization within the production of bio-briquette fuel by using high-pressure briquetting technology. Finally, analysis of such waste biomass proved its great potential for energy recovery, thus, the advantage of its valorization within the sustainable technologies.
Collapse
Affiliation(s)
- Anna Brunerová
- Department of Material Science and Manufacturing Technology, Faculty of Engineering, Czech University of Life Sciences Prague, Prague, Czech Republic
| | - Hynek Roubík
- Department of Sustainable Technologies, Faculty of Tropical AgriSciences, Czech University of Life Sciences Prague, Prague, Czech Republic
| | - Milan Brožek
- Department of Material Science and Manufacturing Technology, Faculty of Engineering, Czech University of Life Sciences Prague, Prague, Czech Republic
| | - Dinh Van Dung
- Department of Animal Nutrition and Biochemistry, Faculty of Animal Sciences & Veterinary Medicine, Hue University, Hue University of Agriculture & Forestry, Hue City, Vietnam
| | - Le Dinh Phung
- Department of Animal Nutrition and Biochemistry, Faculty of Animal Sciences & Veterinary Medicine, Hue University, Hue University of Agriculture & Forestry, Hue City, Vietnam
| | - Udin Hasanudin
- Department of Agro-industrial Technology, Faculty of Agriculture, University of Lampung, Bandar Lampung, Republic of Indonesia
| | - Dewi Agustina Iryani
- Department of Chemical Engineering, Engineering Faculty, University of Lampung, Bandar Lampung, Republic of Indonesia
| | - David Herák
- Department of Mechanical Engineering, Faculty of Engineering, Czech University of Life Sciences Prague, Prague, Czech Republic
| |
Collapse
|
15
|
Januszewicz K, Kazimierski P, Klein M, Kardaś D, Łuczak J. Activated Carbon Produced by Pyrolysis of Waste Wood and Straw for Potential Wastewater Adsorption. Materials (Basel) 2020; 13:E2047. [PMID: 32349443 DOI: 10.3390/ma13092047] [Citation(s) in RCA: 31] [Impact Index Per Article: 7.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/26/2020] [Revised: 04/22/2020] [Accepted: 04/23/2020] [Indexed: 11/17/2022]
Abstract
Pyrolysis of straw pellets and wood strips was performed in a fixed bed reactor. The chars, solid products of thermal degradation, were used as potential materials for activated carbon production. Chemical and physical activation processes were used to compare properties of the products. The chemical activation agent KOH was chosen and the physical activation was conducted with steam and carbon dioxide as oxidising gases. The effect of the activation process on the surface area, pore volume, structure and composition of the biochar was examined. The samples with the highest surface area (1349.6 and 1194.4 m2/g for straw and wood activated carbons, respectively) were obtained when the chemical activation with KOH solution was applied. The sample with the highest surface area was used as an adsorbent for model wastewater contamination removal.
Collapse
|
16
|
Usmani Z, Sharma M, Sudheer S, Gupta VK, Bhat R. Engineered Microbes for Pigment Production Using Waste Biomass. Curr Genomics 2020; 21:80-95. [PMID: 32655303 PMCID: PMC7324876 DOI: 10.2174/1389202921999200330152007] [Citation(s) in RCA: 15] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/04/2020] [Revised: 03/08/2020] [Accepted: 03/16/2020] [Indexed: 12/17/2022] Open
Abstract
Agri-food waste biomass is the most abundant organic waste and has high valorisation potential for sustainable bioproducts development. These wastes are not only recyclable in nature but are also rich sources of bioactive carbohydrates, peptides, pigments, polyphenols, vitamins, natural antioxidants, etc. Bioconversion of agri-food waste to value-added products is very important towards zero waste and circular economy concepts. To reduce the environmental burden, food researchers are seeking strategies to utilize this waste for microbial pigments production and further biotechnological exploitation in functional foods or value-added products. Microbes are valuable sources for a range of bioactive molecules, including microbial pigments production through fermentation and/or utilisation of waste. Here, we have reviewed some of the recent advancements made in important bioengineering technologies to develop engineered microbial systems for enhanced pigments production using agri-food wastes biomass/by-products as substrates in a sustainable way.
Collapse
Affiliation(s)
| | - Minaxi Sharma
- Address correspondence to these authors at the ERA Chair for Food (By-) Products Valorization Technologies- VALORTECH, Estonian University of Life Sciences, Kreutzwaldi 56/5, 51006, Tartu, Estonia; Tel/Fax: +372 7313927; E-mails: ;, ;
| | | | | | - Rajeev Bhat
- Address correspondence to these authors at the ERA Chair for Food (By-) Products Valorization Technologies- VALORTECH, Estonian University of Life Sciences, Kreutzwaldi 56/5, 51006, Tartu, Estonia; Tel/Fax: +372 7313927; E-mails: ;, ;
| |
Collapse
|
17
|
Kameyama K, Miyamoto T, Iwata Y. The Preliminary Study of Water-Retention Related Properties of Biochar Produced from Various Feedstock at Different Pyrolysis Temperatures. Materials (Basel) 2019; 12:ma12111732. [PMID: 31141965 PMCID: PMC6601046 DOI: 10.3390/ma12111732] [Citation(s) in RCA: 20] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/15/2019] [Revised: 05/20/2019] [Accepted: 05/27/2019] [Indexed: 11/16/2022]
Abstract
Physicochemical properties of biochar, which are used as a soil amendment material in agricultural fields, are different depending on biomass feedstock and pyrolysis processes. In this study, we evaluated the influence of feedstock type and pyrolysis temperature on the water-retention related properties of biochar. Wood-chips [cedar (CE) and cypress (CY)]; moso bamboo (MB); rice husk (RH); sugarcane bagasse (SB); poultry manure (PM) and agricultural wastewater sludge (WS) were each pyrolysed at 400, 600 and 800 °C with a retention time of two hours. Scanning electron microscopy micrographs (SEM), hydrophobicity indices, pore-size distribution measured by mercury-intrusion porosimetry, water-retention curves (WRCs) and plant-available water capacities (AWCs) of the biochars were measured to evaluate their potentials as soil-amendment materials for improving soils’ water-retention. As the pyrolysis temperature was increased, the hydrophobicity index decreased. On the other hand, pyrolysis temperature did not affect the distribution of micrometre-range pores, which are useful for plant-available water, of biochars. The AWCs of the biochars formed from CE, CY and SB were greater than those produced from other feedstocks, at 600 and 800 °C. Therefore, we can suggest that the biochars derived from wood-chips (CE and CY) and SB have greater potential for enhancing soils’ water-retention.
Collapse
Affiliation(s)
- Koji Kameyama
- Institute for Rural Engineering, National Agricultural and Food Research Organization, 2-1-6 Kannondai, Tsukuba, Ibaraki 305-8609, Japan.
| | - Teruhito Miyamoto
- Institute for Rural Engineering, National Agricultural and Food Research Organization, 2-1-6 Kannondai, Tsukuba, Ibaraki 305-8609, Japan.
| | - Yukiyoshi Iwata
- Institute for Rural Engineering, National Agricultural and Food Research Organization, 2-1-6 Kannondai, Tsukuba, Ibaraki 305-8609, Japan.
| |
Collapse
|
18
|
Ben H, Wu Z, Han G, Jiang W, Ragauskas A. Pyrolytic Behavior of Major Biomass Components in Waste Biomass. Polymers (Basel) 2019; 11:E324. [PMID: 30960309 DOI: 10.3390/polym11020324] [Citation(s) in RCA: 21] [Impact Index Per Article: 4.2] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/21/2019] [Revised: 02/03/2019] [Accepted: 02/05/2019] [Indexed: 11/16/2022] Open
Abstract
The pyrolytic behavior of several biomass components including cellulose, hemicellulose, lignin, and tannin, from two sources of waste biomass (i.e., pine bark and pine residues) were examined. Compared to the two aromatic-based components in the biomass, carbohydrates produced much less char but more gas. Surprisingly, tannin produced a significant amount of water-soluble products; further analysis indicated that tannin could produce a large amount of catechols. The first reported NMR chemical shift databases for tannin and hemicellulose pyrolysis oils were created to facilitate the HSQC analysis. Various C⁻H functional groups (>30 different C⁻H bonds) in the pyrolysis oils could be analyzed by employing HSQC-NMR. The results indicated that most of the aromatic C⁻H and aliphatic C⁻H bonds in the pyrolysis oils produced from pine bark and pine residues resulted from the lignin and tannin components. A preliminary study for a quantitative application of HSQC-NMR on the characterization of pyrolysis oil was also done in this study. Nevertheless, the concepts established in this work open up new methods to fully characterize the whole portion of pyrolysis oils produced from various biomass components, which can provide valuable information on the thermochemical mechanisms.
Collapse
|
19
|
Thushari I, Babel S. Preparation of solid acid catalysts from waste biomass and their application for microwave-assisted biodiesel production from waste palm oil. Waste Manag Res 2018; 36:719-728. [PMID: 30058978 DOI: 10.1177/0734242x18789821] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
Waste utilization is essential and challenging. Utilization of wastes gives environmental, economic, and social benefits. In this study, inexpensive, sulfonated solid acid catalysts were successfully prepared from palm empty fruit bunch (PEFB), coconut meal residue (CMR), and coconut coir husk (CH) waste by a simple protocol. It was found that prepared PEFB-BCS-SO3H, CMR-BCS-SO3H, and CH-BCS-SO3H catalysts have 4.79, 3.75, and 2.80 mmol g-1 acid density and 739.0, 89.77, and 61.49 m2 g-1 surface areas, respectively. Further, the presence of active functional groups on the surface of the catalysts was confirmed by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. Thermal stability of the catalysts was found below 150°C. Results show that biodiesel yield increases with increasing reaction time and methanol loading, when using microwave heating for biodiesel production from waste palm oil (WPO) and prepared catalysts. A maximum biodiesel yield of 95.5% was obtained by PEFB-BCS-SO3H in 60 minutes using 20:1 methanol:oil (molar ratio) at 70°C. CMR-BCS-SO3H and CH-BCS-SO3H obtained 88.7 and 88.5% biodiesel yields in 60 minutes, using 20:1 and 16:1 methanol:oil (molar ratio), at 70 and 110°C, respectively. Even though, the activity of the catalysts decreased during reuse, these are still of interest as the waste biomass of PEFB, CMR, and CH can be used for catalyst preparation and microwave-assisted biodiesel production from WPO.
Collapse
Affiliation(s)
- Indika Thushari
- Sirindhorn International Institute of Technology, Thammasat University, Pathum Thani, Thailand
| | - Sandhya Babel
- Sirindhorn International Institute of Technology, Thammasat University, Pathum Thani, Thailand
| |
Collapse
|
20
|
Xu X, Dai Y, Yu J, Hao L, Duan Y, Sun Y, Zhang Y, Lin Y, Zou J. Metallic State FeS Anchored (Fe)/Fe 3O 4/N-Doped Graphitic Carbon with Porous Spongelike Structure as Durable Catalysts for Enhancing Bioelectricity Generation. ACS Appl Mater Interfaces 2017; 9:10777-10787. [PMID: 28291333 DOI: 10.1021/acsami.7b01531] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/06/2023]
Abstract
The critical issues in practical application of microbial fuel cells (MFCs) for wastewater treatment are the high cost and poor activity and durability of precious metal catalysts. To alleviate the activity loss and kinetic barriers for oxygen reduction reaction (ORR) on cathode, (Fe)/Fe3O4/FeS/N-doped graphitic carbon ((Fe)/Fe3O4/FeS/NGC) is prepared as ORR catalyst through a one-step method using waste pomelo skins as carbon source. Various characterization techniques and electrochemical analyses are conducted to illustrate the correlation between structural characteristics and catalytic activity. MFCs with Fe/Fe3O4/FeS/NGC (900 °C) cathode produces the maximum power density of 930 ± 10 mW m-2 (Pt/C of 489 mW m-2) and maintains a good long-term durability, which only declines 18% after 90 day operation. Coulombic efficiency (22.2%) obtained by Fe/Fe3O4/FeS/NGC (900 °C) cathode is significantly higher than that of Pt/C (17.3%). Metallic state FeS anchored in porous NGC skeleton can boost electron transport through the interconnected channels in spongelike structure to improve catalytic activity. Charge delocalization of C atoms can be strengthened by N atoms incorporation into carbon skeleton, which correspondingly contributes to the O2 chemisorptions and O-O bond weakening during ORR. Energetically existed active components (Fe and N species) are more efficient than Pt to trap and consume electrons in catalyzing ORR in wastewater containing Pt-poisoning substances (bacterial metabolites). (Fe)/Fe3O4/FeS/NGC catalysts with the advantages of durable power outputs and environmental-friendly raw material can cover the shortages of Pt/C and provide an outlook for further applications of these catalysts.
Collapse
Affiliation(s)
- Xin Xu
- Key Laboratory of Functional Inorganic Material Chemistry, Ministry of Education of the People's Republic of China, School of Chemistry and Materials Science, Heilongjiang University , Harbin 150080, China
| | - Ying Dai
- Key Laboratory of Functional Inorganic Material Chemistry, Ministry of Education of the People's Republic of China, School of Chemistry and Materials Science, Heilongjiang University , Harbin 150080, China
- School of Civil Engineering, Heilongjiang Institute of Technology , Harbin 150050, China
| | - Jia Yu
- College of Aerospace and Civil Engineering, Harbin Engineering University , Harbin, China
| | - Liang Hao
- Key Laboratory of Functional Inorganic Material Chemistry, Ministry of Education of the People's Republic of China, School of Chemistry and Materials Science, Heilongjiang University , Harbin 150080, China
| | - Yaqiang Duan
- Key Laboratory of Functional Inorganic Material Chemistry, Ministry of Education of the People's Republic of China, School of Chemistry and Materials Science, Heilongjiang University , Harbin 150080, China
| | - Ye Sun
- Key Laboratory of Functional Inorganic Material Chemistry, Ministry of Education of the People's Republic of China, School of Chemistry and Materials Science, Heilongjiang University , Harbin 150080, China
| | - Yanhong Zhang
- Key Laboratory of Functional Inorganic Material Chemistry, Ministry of Education of the People's Republic of China, School of Chemistry and Materials Science, Heilongjiang University , Harbin 150080, China
| | - Yuhui Lin
- Key Laboratory of Functional Inorganic Material Chemistry, Ministry of Education of the People's Republic of China, School of Chemistry and Materials Science, Heilongjiang University , Harbin 150080, China
| | - Jinlong Zou
- Key Laboratory of Functional Inorganic Material Chemistry, Ministry of Education of the People's Republic of China, School of Chemistry and Materials Science, Heilongjiang University , Harbin 150080, China
| |
Collapse
|