High-solids loading processing for an integrated lignocellulosic biorefinery: Effects of transport phenomena and rheology - A review

Co-production of fermentable sugars and highly active lignin from eucalyptus via a mild preprocessing with diethylene glycol and chromic chloride

Eucalyptus was pretreated with diethylene glycol catalyzed by 0.02 mol/L CrCl3 for 10 min, resulting in 91 % delignification and 98 % cellulose recovery, with trace fermentation inhibitors generated. After the mild pretreatment, the accessibility and affinity of cellulase to eucalyptus was enhanced, especially since enzyme adsorption rate increased by 1.6-fold. Therefore, glucose yield of pretreated eucalyptus was 7.9-fold higher than that of untreated eucalyptus after hydrolyzed 48 h, in which the maximum glucose concentration reached 62 g/L from eucalyptus by adding Tween 80. According to the characterization analysis, the structure of the eucalyptus lignin-carbohydrate complexes structure was destroyed during the pretreatment, while lignin fragments was likely reacted with diethylene glycol to form the stabilized aromatic ethers. Moreover, the extracted Deg-lignin exhibited better performances than commercial alkali lignin such as higher fluorescence intensity, less negative surface charge, and lower particle size. The mild pretreatment method with diethylene glycol and CrCl3 provided a promising approach for co-production of fermentable sugars and high activity lignin from lignocellulosic biomass.

Fed-batch treatment attenuates diffusional limitation while preparing high solid microfibrillated cellulose from Gelidium amansii

This study investigates the effects of fed-batch treatment on the fibrillation degree and properties of Gelidium amansii-derived microfibrillated cellulose (MFC). Fed-batch milling was conducted with the initial solid loading of 1 % w/v followed by three stages of feeding to obtain a final solid concentration of 5 % w/v. This process provides a high-solid MFC of around 10 %, while batch milling only provides the maximum solid loading of 4 %. It also reduces approximately 83 % power consumption of batch milling at the same solid loading (4 %). The obtained MFC 5 % has lower fibrils length (14.9 µm) and width (16.46 nm), but higher consistency index (>250 Pa.s) than MFC 1 % (22 µm, 21 nm, 5.88 Pa.s). The crystallinity and maximum decomposition temperatures of both MFCs are comparable, varying at 49-53 % and 318 °C-320 °C. In summary, fed-batch treatment is promising for the techno-economic development of MFC production by lowering energy and maintaining product quality.

Achieving efficient and rapid high-solids enzymatic hydrolysis for producing high titer ethanol with the assistance of di-rhamnolipids

High-solids enzymatic hydrolysis is the premise of obtaining high concentration ethanol by fermentation. In this study, corn stover was first pretreated with formic acid under mild conditions, and more than 70 % of xylan and lignin were removed within the first hour. 173.0 g/L glucose was achieved from total 30 % solid of the pretreated corn stover via fed-batch mode. Moreover, the glucose concentration rose to 194.5 g/L and the hydrolysis time was significantly reduced by 42.9 % with the addition of di-rhamnolipid. On this basis, 89.1 g/L ethanol was obtained by fermentation, and the presence of di-rhamnolipid had no negative effect on fermentation. The effective conversion of corn stover to high titer ethanol provides support for the conversion of stover to ethanol in industrial production.

Addressing two major limitations in high-solids enzymatic hydrolysis by an ordered polyethylene glycol pre-incubated strategy: Rheological properties and lignin adsorption for enzyme

High-solids enzymatic hydrolysis for biomass has currently received considerable interest. However, the solid effect during the process limits its economic feasibility. This work presented an ordered polyethylene glycol (PEG) pre-incubated strategy for enhancing the auxiliary effect of PEG in a high-solids enzymatic hydrolysis system. The substrate and enzyme were separately pre-incubated with PEG in this strategy. The ordered PEG pre-incubated strategies yielded a maximum glucose concentration of 166.6 g/L from 32 % (w/v) pretreated corncob with an enzymatic yield of 94.1 % by 72 h hydrolysis. Using this method, PEG not only lessened the lignin adsorption to cellulase but also altered particle rheological characteristics in the high-solids enzymatic hydrolysis system as a viscosity modifier. This study offered a new insight into the mechanism behind the PEG synergistic effect and would make it possible to achieve efficient high-solids loading hydrolysis in the commercial manufacture of cellulosic ethanol.

High-solids enzymatic saccharification of starch-rich raw herbal biomass residues for producing high titers of glucose

The bioresource utilization of herbal biomass residues (HBRs) has been receiving more attention. Herein, three different HBRs from Isatidis Radix (IR) and Sophorae Flavescentis Radix (SFR) and Ginseng Radix (GR) were subjected to batch and fed-batch enzymatic hydrolysis to produce high-concentration glucose. Compositional analysis showed the three HBRs had substantial starch content (26.36-63.29%) and relatively low cellulose contents (7.85-21.02%). Due to their high starch content, the combined action of cellulolytic and amylolytic enzymes resulted in greater release of glucose from the raw HBRs compared to using the individual enzyme alone. Batch enzymatic hydrolysis of 10% (w/v) raw HBRs with low loadings of cellulase (≤ 10 FPU/g substrate) and amylolytic enzymes (≤ 5.0 mg/g substrate) led to a high glucan conversion of ≥ 70%. The addition of PEG 6000 and Tween 20 did not contribute to glucose production. Furthermore, to achieve higher glucose concentrations, fed-batch enzymatic hydrolysis was conducted using a total solid loading of 30% (w/v). After 48-h of hydrolysis, glucose concentrations of 125 g/L and 92 g/L were obtained for IR and SFR residues, respectively. GR residue yielded an 83 g/L glucose concentration after 96 h of digestion. The high glucose concentrations produced from these raw HBRs indicate their potential as ideal substrate for a profitable biorefinery. Notably, the obvious advantage of using these HBRs is the elimination of the pretreatment step, which is typically required for agricultural and woody biomass in similar studies.

High bioethanol titer and yield from phosphoric acid plus hydrogen peroxide pretreated paper mulberry wood through optimization of simultaneous saccharification and fermentation

The optimization of key simultaneous saccharification and fermentation (SSF) parameters for bioethanol production from phosphoric acid plus hydrogen peroxide pretreated paper mulberry wood was carried out under two isothermal scenarios; the yeast optimum and trade-off temperatures of 35 and 38 °C, respectively. The optimal conditions established for SSF at 35 °C (solid loading: 16%; enzyme dosage: 9.8 mg protein/g glucan; and yeast concentration: 6.5 g/L) achieved high ethanol titer and yield of 77.34 g/L and 84.60% (0.432 g/g), respectively. These corresponded to 1.2 and 1.3-folds increases, compared to the results of the optimal SSF at a relatively higher temperature of 38 °C. The information from this study would prove beneficial in reducing process energy demands to some extent, while also helping to achieve high levels of both ethanol concentration and yield that are desired in cellulosic ethanol production.

Enzymatic Hydrolysis Strategies for Cellulosic Sugars Production to Obtain Bioethanol from Eucalyptus globulus Bark

Cellulosic sugars production for the valorization of lignocellulosic biomass residues in an industrial site has economic benefits and is promising if integrated into a biorefinery. Enzymatic hydrolysis (EH) of pretreated Eucalyptus globulus bark, an industrial residue of low-economic value widely available in Portuguese pulp and paper mills, could be an excellent approach to attain resource circularity and pulp mill profitability. This work evaluated the potential for improving cellulosic sugars concentrations by operating with high solids loading and introducing the additives Triton X-100, PEG 4000 and Tween 80 using a commercial enzymatic consortium with a dosage of 25 FPU gcarbohydrates−1. Additives did not improve enzymatic hydrolysis performance, but the effect of increasing solids loading to 14% (w/v) in batch operation was accomplished. The fed-batch operation strategy was investigated and, when starting with 11% (w/v) solids loading, allowed the feeding of 3% (w/v) fresh feedstock sequentially at 2, 4 and 6 h, attaining 20% (w/v) total solids loading. After 24 h of operation, the concentration of cellulosic sugars reached 161 g L−1, corresponding to an EH conversion efficiency of 76%. Finally, the fermentability of the fed-batch hydrolysate using the Ethanol Red® strain was evaluated in a 5 L bioreactor scale. The present results demonstrate that Eucalyptus globulus bark, previously pretreated by kraft pulping, is a promising feedstock for cellulosic sugars production, allowing it to become the raw material for feeding a wide range of bioprocesses.

High solids loading pretreatment: The core of lignocellulose biorefinery as an industrial technology - An overview

Pretreatment is the first and most determinative, yet the least mature step of lignocellulose biorefinery chain. The current stagnation of biorefinery commercialization indicates the barriers of the existing pretreatment technologies are needed to be unlocked. This review focused on one of the core factors, the high lignocellulose solids loading in pretreatment. The high solids loading of pretreatment significantly reduces water input, energy requirement, toxic compound discharge, solid/liquid separation costs, and carbon dioxide emissions, improves the titers of sugars and biproducts to meet the industrial requirements. Meanwhile, lignocellulose feedstock after high solids loading pretreatment is compatible with the existing logistics system for densification, packaging, storage, and transportation. Both the technical-economic analysis and the cellulosic ethanol conversion performance suggest that the solids loading in the pretreatment step need to be further elevated towards an industrial technology and the effective solutions should be proposed to the technical barriers in high solids loading pretreatment operations.

Advances in process design, techno-economic assessment and environmental aspects for hydrothermal pretreatment in the fractionation of biomass under biorefinery concept

The development and sustainability of second-generation biorefineries are essential for the production of high added value compounds and biofuels and their application at the industrial level. Pretreatment is one of the most critical stages in biomass processing. In this specific case, hydrothermal pretreatments (liquid hot water [LHW] and steam explosion [SE]) are considered the most promising process for the fractionation, hydrolysis and structural modifications of biomass. This review focuses on architecture of the plant cell wall and composition, fundamentals of hydrothermal pretreatment, process design integration, the techno-economic parameters of the solubilization of lignocellulosic biomass (LCB) focused on the operational costs for large-scale process implementation and the global manufacturing cost. In addition, profitability indicators are evaluated between the value-added products generated during hydrothermal pretreatment, advocating a biorefinery implementation in a circular economy framework. In addition, this review includes an analysis of environmental aspects of sustainability involved in hydrothermal pretreatments.

Liquid hot water pretreatment combined with high-solids enzymatic hydrolysis and fed-batch fermentation for succinic acid sustainable processed from sugarcane bagasse

In order to sustainable process of bio-succinic acid (SA), response surface methodology (RSM) was applied to optimize liquid hot water pretreatment pretreatment of sugarcane bagasse (SCB), followed by high-solids enzymatic hydrolysis of pretreated residual that without washing, then the hydrolysates and partial pretreatment liquid were used as carbon sources for SA fermentation. Results showed that the highest sugars yield could be achieved at pretreatment conditions of temperature 186 °C, time 25 min and solid-to-liquid ratio 0.08; enzymatic digestion the pretreated residuals at 20 % (w/v) solid content via enzymes reconstruction and fed-batch strategy, the obtained sugars reached to 121 g/L; by controlling the nutrition and conditions of the fermentation process, most of the C5 and C6 sugars in the hydrolysate and pretreatment liquid were converted into SA with a conversion rate high to 280 mg/g SCB. This study can provide a novel clue for clean and efficient biorefining of chemicals.

Enhancing ethylene glycol and ferric chloride pretreatment of rice straw by low-pressure carbon dioxide to improve enzymatic saccharification

Ethylene glycol and ferric chloride pretreatment assisted by low-pressure carbon dioxide (1 MPa CO₂) realized the targeted deconstruction of lignocelluloses at 170 °C for 5 min, achieving 98 % cellulose recovery with removal of 92 % lignin and 90 % hemicellulose. After the pretreatment, the formation of stable platform mono-phenol components would be with the destruction of the lignin-carbohydrate complexes structure, and the surface of rice straw became rough, with a less negative charge and higher specific surface area, while the enzyme adsorption rate increased by 8.1 times. Furthermore, the glucose yield of pretreated straw was remarkably increased by 5.6 times that of the untreated straw, reaching 91 % after hydrolyzed for 48 h. With Tween 80 added in concentrated solid (12 %) hydrolysis at low cellulase loading (3 FPU/g dry substrate), half of the hydrolysis time was shortened than that without Tween 80, with 45 % higher glucose yield.

Combination of simultaneous saccharification and fermentation of corn stover with consolidated bioprocessing of cassava starch enhances lipid production by the amylolytic oleaginous yeast Lipomyces starkeyi

Highly integrated processes are crucial for the commercial success of microbial lipid production from low-cost substrates. Here, combination of simultaneous saccharification and fermentation (SSF) of corn stover with consolidated bioprocessing (CBP) of cassava starch by Lipomyces starkeyi was firstly developed as a novel strategy for lipid production. Starch was quickly hydrolyzed within 24 h by the amylolytic enzymes secreted by L. starkeyi to provide adequate fermentable sugars at the initial stage of culture, which eliminated the pre-hydrolysis step. More interestingly, synergistic effect for achieving higher lipid production by combined utilization of corn stover and cassava starch at relatively low enzyme dosage was realized, in comparison with the separate utilization of these two substrates. The fatty acid profiles indicated that lipid prepared by the combination strategy was suitable precursor for biodiesel production. The combined SSF&CBP strategy offers a simplified, highly-efficient, and economical route for co-valorization of low-cost substrates into lipids.