Adsorption of microorganisms onto an artificial siderophore-modified Au substrate

Detection of Microorganisms Using Artificial Siderophore-FeIII Complex-Modified Substrates

Four FeIII complexes of typical artificial siderophore ligands containing catecholate and/or hydroxamate groups of tricatecholate, biscatecholate-monohydroxamate, monocatecholate-bishydroxamate, and trihydroxamate type artificial siderophores (K3[FeIIILC3], K2[FeIIILC2H1], K[FeIIILC1H2], and [FeIIILH3]) were modified on Au substrate surfaces. Their abilities to adsorb microorganisms were investigated using scanning electron microscopy, quartz crystal microbalance, and AC impedance methods. The artificial siderophore-iron complexes modified on Au substrates (FeLC3/Au, FeLC2H1/Au, FeLC1H2/Au, and FeLH3/Au) showed the selective immobilization behavior for various microorganisms, depending on the structural features of the artificial siderophores (the number of catecholate and hydroxamate arms). Their specificities corresponded well with the structural characteristics of natural siderophores released by microorganisms and used for FeIII ion uptake. These findings suggest that they were generated via specific interactions between the artificial siderophore-FeIII complexes and the receptors on microorganism surfaces. Our observations revealed that the FeL/Au systems may be potentially used as effective microbe-capturing probes that can enable rapid and simple detection and identification of various microorganisms.

[Microorganism Immobilization Device Using Artificial Siderophores]

Inspired by the mechanism by which microorganisms utilize siderophores to ingest iron, four different FeIII complexes of typical artificial siderophore ligands containing catecholate and/or hydroxamate groups, K3[FeIII-LC3], K2[FeIII-LC2H1], K[FeIII-LC1H2], and [FeIII-LH3], were prepared. They were modified on an Au substrate surface (Fe-L/Au) and applied as microorganism immobilization devices for fast, sensitive, selective detection of microorganisms, where H6LC3, H5LC2H1, H4LC1H2, and H3LH3 denote the tri-catecholate, biscatecholate-monohydroxamate, monocatecholate-bishydroxamate, and tri-hydroxamate type of artificial siderophores, respectively. Their adsorption properties for the several microorganisms were investigated using scanning electron microscopy (SEM), quartz crystal microbalance (QCM), and electric impedance spectroscopy (EIS) methods. The artificial siderophore-iron complexes modified on the Au substrates Fe-LC3/Au, Fe-LC2H1/Au, Fe-LC1H2/Au, and Fe-LH3/Au showed specific microorganism immobilization behavior with selectivity based on the structure of the artificial siderophores. Their specificities corresponded well with the structural characteristics of natural siderophores that microorganisms release from the cell and/or use to take up an iron. These findings suggest that release and uptake are achieved through specific interactions between the artificial siderophore-FeIII complexes and receptors on the cell surfaces of microorganisms. This study revealed that Fe-L/Au systems have specific potential to serve as effective immobilization probes of microorganisms for rapid, selective detection and identification of a variety of microorganisms.

Iron(III) Complexes with Hybrid-Type Artificial Siderophores Containing Catecholate and Hydroxamate Sites

Two hybrid-type artificial siderophore ligands containing both catecholate and hydroxamate groups as iron-capturing sites, bis(2,3-dihydroxybenzamidepropyl)mono[2-propyl]aminomethane (H5LC2H1) and mono(2,3-dihydroxybenzamide-propyl)bis[2-propyl]aminomethane (H4LC1H2), were designed and synthesized. Iron(III) complexes, K2[FeIIILC2H1] and K[FeIIILC1H2], were prepared and characterized spectroscopically, potentiometrically, and electrochemically. The results were compared with those previously reported for iron complexes with non-hybridized siderophores containing either catecholate or hydroxamate groups, K3[FeIIILC3] and [FeIIILH3]. Both K2[FeIIILC2H1] and K[FeIIILC1H2] formed six-coordinate octahedral iron(III) complexes. Evaluation of the thermodynamic properties of the complexes in an aqueous solution indicated high log β values of 37.3 and 32.3 for K2[FeIIILC2H1] and K[FeIIILC1H2], respectively, which were intermediate between those of K3[FeIIILC3] (44.2) and [FeIIILH3] (31). Evaluation of the ultraviolet-visible and Fourier transform infrared spectra of the two hybrid siderophore-iron complexes under different pH or pD (potential of dueterium) conditions showed that the protonation of K2[FeIIILC2H1] and K[FeIIILC1H2] generated the corresponding protonated species, [FeIIIHnLC2H1](2-n)- and [FeIIIHnLC1H2](1-n)-, accompanied by a significant change in the coordination mode. The protonated hybrid-type siderophore-iron complexes showed high reduction potentials, which were well within the range of those of biological reductants. The results suggest that the hybrid-type siderophore easily releases an iron(III) ion at low pH. The biological activity of the four artificial siderophore-iron complexes against Microbacterium flavescens and Escherichia coli clearly depends on the structural differences between the complexes. This finding demonstrates that the changes in the coordination sites of the siderophores enable close control of the interactions between the siderophores and receptors in the cell membrane.

Siderophores for medical applications: Imaging, sensors, and therapeutics

Siderophores are low-molecular-weight chelators produced by microorganisms to scavenge iron from the environment and deliver it to cells via specific receptors. Tremendous researches on the molecular basis of siderophore regulation, synthesis, secretion, and uptake have inspired their diverse applications in the medical field. Replacing iron with radionuclides in siderophores, such as the most prominent Ga-68 for positron emission tomography (PET), carves out ways for targeted imaging of infectious diseases and cancers. Additionally, the high affinity of siderophores for metal ions or microorganisms makes them a potent detecting moiety in sensors that can be used for diagnosis. As for therapeutics, the notable Trojan horse-inspired siderophore-antibiotic conjugates demonstrate enhanced toxicity against multi-drug resistant (MDR) pathogens. Besides, siderophores can tackle iron overload diseases and, when combined with moieties such as hydrogels and nanoparticles, a wide spectrum of iron-induced diseases and even cancers. In this review, we briefly outline the related mechanisms, before summarizing the siderophore-based applications in imaging, sensors, and therapeutics.

Adsorption and detection of Escherichia coli using an Au substrate modified with a catecholate-type artificial siderophore-Fe3+ complex

A catecholate-type artificial siderophore with a terminal-NH2 group (1) and its Fe(3+) complex (2) were prepared. Siderophore 1 was characterized by (1)H NMR, FT-IR, and ESI-TOF MS spectroscopy. The corresponding Fe(3+) complex 2 was obtained by reaction of 1 with Fe(acac)3. The absorption band at 500 nm (ε = 4670 M(-1) cm(-1) at pH 7.0) of the electronic absorption spectrum of 2 is assignable as the LMCT (O(catecholate) → Fe(3+)) absorption band. This band indicates the formation of the Fe(3+) complex of 1. The biological activity of 2 with respect to Escherichia coli was clearly confirmed by observing that it permeates into the cell membrane. The self-assembled monolayer of 2 on an Au substrate, 2/Au, was prepared and its preparation was confirmed by FT-IR reflection-absorption spectroscopy (IR-RAS) and cyclic voltammetry (CV). Furthermore, a quartz crystal microbalance (QCM) chip modified with 2 effectively adsorbed E. coli. M. flavescens, an organism which is incapable of synthesizing siderophores and must therefore use exogenous hydroxamate-type siderophores for growth, did not adsorb on 2/Au. In contrast, E. coli did not adsorb on the hydroxamate-type artificial siderophore-Fe(3+) complex (3)-modified Au substrate, 3/Au. These results provide preliminary evidence that microbes recognized Fe(3+) ion-bound siderophores on the surface. The detection limit of 2/Au was ∼10(4) CFU mL(-1).

Exploiting bacterial iron acquisition: siderophore conjugates

Siderophores are chelators synthesized by bacteria and fungi to sequester iron, which is essential for virulence and pathogenicity. Since the process involves active transport, which is highly regulated, remarkably efficient and often microbially selective, it has been exploited as a Trojan Horse method for development of microbe-selective antibiotics. Siderophores also have significant potential for the development of imaging contrast agents and diagnostics for pathogen-selective detection. These promising results demonstrate the versatility of natural and synthetic microbial iron chelators and their potential therapeutic applications.

Adsorption behavior of microbes on a QCM chip modified with an artificial siderophore-Fe3+ complex

Three hydroxamate-type artificial siderophores with terminal NH(2) groups, tris[2-{3-(N-acyl-N-hydroxamino)propylamido}propyl]aminomethane (1-3, acyl-R group = Me, Et, and Ph, respectively), and their Fe(3+) complexes, 4-6, were prepared. The stability constant (log β) of 4 was estimated to be about 31 by its EDTA titration. The biological activities of 4-6 for Microbacterium flavescens, which is a hydroxamate-type siderophore, auxotrophic gram-positive microbe, clearly indicated that they permeated the cell membrane depending on their terminal bulky acyl-R groups. These artificial siderophore complexes, 4-6, were modified on Au electrode surfaces with the terminal NH(2) group (4-6/Au). The surface modification of 4-6 was confirmed by several electrochemical measurements. The quartz crystal microbalance (QCM) chips were also modified with 4-6. Microbe adsorption measurements using these modified QCM chips for M. flavescens, Pseudomonas putida, and Eschrichia coli were performed. The QCM chips have the ability to adsorb microbes selectively as a result of the differences in the interactions between the structures of Fe(3+)-artificial siderophore complexes and their receptors or binding proteins within the cell membrane.

Chiral recognition of mandelic acid by L-phenylalanine-modified sensor using quartz crystal microbalance

This study presents a new method for the highly selective recognition of chiral mandelic acid (MA) using L-phenylalanine (L-Phe) as the selector. The proposed method is based on quartz crystal microbalance (QCM) detection, integrated with a vapor diffused molecular assembly (VDMA) reaction technique. The construction of the L-Phe-modified QCM sensor involved a two-step assembly procedure. The chiral recognizability of L- and D-MA on the L-Phe-modified surface was then examined using the VDMA method and QCM. The chiral discrimination factor between L- and D-MA detected by QCM, alpha(L-MA/D-MA), was found to be about 8. The VDMA selective sensing of L-MA on the L-Phe-modified surface was also confirmed by the contact angle measurements. The L-Phe-modified QCM sensor showed good stability and reusability. The present chiral recognition results suggest that L-phe is an excellent resolving agent for the resolution of chiral mandelic acid.

Isolation and diversity analysis of arsenite-resistant bacteria in communities enriched from deep-sea sediments of the Southwest Indian Ocean Ridge

Microorganisms play an important role in the geobiocycling of arsenic element. However, little is known about the bacteria involved in this process in oceanic environments. In this report, arsenite-resistant bacteria were detected in deep-sea sediments on the Southwest Indian Ridge. From arsenite enriched cultures, 54 isolates were obtained, which showed varied tolerance to arsenite of 2-80 mM. Phylogenetic analysis based on 16S rRNA showed that they mainly belonged to Proteobacteria and Actinobacteria. Denaturing gradient gel electrophoresis revealed that Microbacterium esteraromaticum was the dominant member in the arsenite enriched communities, and this was reconfirmed by 16S rRNA gene library analyses. Thus, M. esteraromaticum showed highest resistant to arsenite among the detected bacteria. These results indicate that there are quite diverse bacteria of arsenite resistance inhabiting the deep sea sediment, which may play a role in the geobiocycling of arsenic element in marine environments.