Immunochromatographic colloidal carbon-based assay for detection of methiocarb in surface water

Novel Dumbbell-like CeVO4 Carrier-Based Immunochromatographic Assay for Highly Sensitive T-2 Toxin Detection in Food Samples

Improving the sensitivity of immunochromatographic assays (ICAs) lies in the signal strength and probe activity of the labeled tracers, and the color properties and structure of the labeled tracers are key factors affecting the biological activity. In this study, cerium vanadate (CeVO4) of different sizes and shapes (230, 1058, and 710 nm) was synthesized to investigate its impact on the performance of ICA for T-2 detection. The prepared CeVO4 possessed outstanding stability, a large specific surface area, superior biocompatibility, and high compatibility with T-2 mAb (affinity constant was 3.14 × 108 M-1). As labeling probes for competitive ICA, the results showed that 1058 nm of CeVO4 as labels exhibited the best detection performance, with a limit of detection (LOD) of 0.079 ng/mL, which was substantially 19-fold less than the average of gold nanoparticle ICA. Additionally, CeVO4-ICA was effectively used to detect T-2 toxin, and the recovery rate for spiking corn and oatmeal samples was determined to be 81.27-115.44% (relative standard deviation <9.16%). The above information demonstrates the efficiency and applicability of CeVO4-ICA as a technique for quick and thorough identification of T-2 toxin residues in food.

Carbon black as a colorimetric label for an immunochromatographic test strip for severe fever with thrombocytopenia syndrome virus detection

To combat the ongoing threat posed by severe fever with thrombocytopenia syndrome virus (SFTSV), especially in underserved areas, there is an urgent need for an affordable and reliable point-of-care diagnostic tool. This study presents a carbon black-based immunochromatographic test strip (CB-ICTS) for the detection of SFTSV, which is both quick and easy to operate. The study optimized the specific steps for carbon black-labeled antibodies, as well as the amount of carbon black and anti-SFTSV antibody used. Under optimal experimental conditions, the linear range and limit of detection of the CB-ICTS were evaluated using different concentrations of SFTSV standard samples. The detection range of the CB-ICTS for SFTSV was found to be 0.1-1000 ng mL^-1, with a limit of detection of 100 pg mL^-1. The precision and accuracy of the CB-ICTS were assessed by examining spiked healthy human serum samples, which displayed recoveries ranging from 91.58 to 105.4% with a coefficient of variation of less than 11%. This work evaluated the specificity of the CB-ICTS using various biomarkers (CA125, AFP, CA199, CEA, and HCG) and demonstrated that the CB-ICTS is highly specific for detecting SFTSV, suggesting its potential for the early diagnosis of SFTSV. In addition, the study evaluated the CB-ICTS in serum samples from patients with SFTSV, and the results were highly consistent with those detected by the polymerase chain reaction (PCR) method. Overall, this study demonstrates the feasibility and effectiveness of using the CB-ICTS as a reliable point-of-care diagnostic tool for the early detection of SFTSV.

A portable smartphone-assisted digital image fluorimetry for analysis of methiocarb pesticide in vegetables: Nitrogen-doped carbon quantum dots as a sensing probe

The increasing use of pesticides in the agriculture fields strengthen the crop production to meet the needs of increasing population. The residues in water and food materials cause several health hazards. Herein, nitrogen-doped carbon quantum dot (N-CQDs) is designed for determination of methiocarb pesticide in vegetables by fluorescent paper sensor and compared the results with fluorimetry. The fluorescent paper-based detection is performed by recording the change in fluorescence of N-CQDs with introduction of methiocarb using smartphone and ImageJ software. Good linear range was acquired for analysis of methiocarb from 10 to 1000 μgL^-1 with a low detection limit (LOD) of 3.5 μgL^-1 in fluorimetry; and 700-10,000 μgL^-1 with a LOD of 500 μgL^-1 in fluorescent paper sensor. A better recovery from 92.0 to 95.4% illustrating the selectivity of both methods for analysis of methiocarb in vegetables. Thus, the advantage of using N-CQDs as a fluorescent sensor for analysis of methiocarb in vegetables is instrument free, portable and user-friendly.

Lateral flow assays for viruses diagnosis: Up-to-date technology and future prospects

Bacteria, viruses, and parasites are harmful microorganisms that cause infectious diseases. Early detection of diseases is critical to prevent disease transmission and provide epidemic preparedness, as these can cause widespread deaths and public health crises, particularly in resource-limited countries. Lateral flow assay (LFA) systems are simple-to-use, disposable, inexpensive diagnostic devices to test biomarkers in blood and urine samples. Thus, LFA has recently received significant attention, especially during the pandemic. Here, first of all, the design principles and working mechanisms of existing LFA methods are examined. Then, current LFA implementation strategies are presented for communicable disease diagnoses, including COVID-19, zika and dengue, HIV, hepatitis, influenza, malaria, and other pathogens. Furthermore, this review focuses on an overview of current problems and accessible solutions in detecting infectious agents and diseases by LFA, focusing on increasing sensitivity with various detection methods. In addition, future trends in LFA-based diagnostics are envisioned.

State of the art: Lateral flow assays toward the point-of-care foodborne pathogenic bacteria detection in food samples

Diverse chemicals and some physical phenomena recently introduced in nanotechnology have enabled scientists to develop useful devices in the field of food sciences. Concerning such developments, detecting foodborne pathogenic bacteria is now an important issue. These kinds of bacteria species have demonstrated severe health effects after consuming foods and high mortality related to acute cases. The most leading path of intoxication and infection has been through food matrices. Hence, quick recognition of foodborne bacteria agents at low concentrations has been required in current diagnostics. Lateral flow assays (LFAs) are one of the urgent and prevalently applied quick recognition methods that have been settled for recognizing diverse types of analytes. Thus, the present review has stressed on latest developments in LFAs-based platforms to detect various foodborne pathogenic bacteria such as Salmonella, Listeria, Escherichia coli, Brucella, Shigella, Staphylococcus aureus, Clostridium botulinum, and Vibrio cholera. Proper prominence has been given on exactly how the labels, detection elements, or procedures have affected recent developments in the evaluation of diverse bacteria using LFAs. Additionally, the modifications in assays specificity and sensitivity consistent with applied food processing techniques have been discussed. Finally, a conclusion has been drawn for highlighting the main challenges confronted through this method and offered a view and insight of thoughts for its further development in the future.

SERS-based test strips: Principles, designs and applications

Test strips represent a class of point-of-care testing (POCT) tools for analysis of a variety of biomarkers towards diagnostics. Conventional test strips offer benefits of simple operation, visualization, and short detection time, along with the drawbacks of relatively low sensitivity and unavailability of quantitative analysis. Recently, the combination of surface-enhanced Raman scattering (SERS) and test strips have evolved to provide a powerful platform capable of ultrasensitive and multiplex detection of extensive analytes of interest. In this review, we focus on the working principles, design strategies and POCT applications of SERS-based test strips. Initially, both lateral and vertical flow test strips are briefly introduced, followed by presentation of various strategies for reforming SERS-based test strips with better detection performance. Applications of SERS-based test strips in diagnosis of disease biomarkers, nucleic acids and toxins are reviewed, with an emphasis on SERS tag design, sensitivity and analytical applicability. Finally, conclusions are made and perspectives on futuristic research directions are given.

Tailor-Made Immunochromatographic Test for the Detection of Multiple 17α-Methylated Anabolics in Dietary Supplements

In recent years, the undeclared presence of various anabolic androgenic steroids (AAS) in commercial supplements has been confirmed. This fact can be a potential threat to all athletes using these supplements, and therefore, there is of increased interest in the implementation of rapid methods for the detection of AAS. The presented study describes the development of an immunostrip test for the detection of multiple 17α-methylated AAS based on direct and indirect competitive principle using gold nanoparticles as a label. As a capture reagent on test lines conjugated stanazolol to rabbit serum albumin (RSA/ST-3) was used, the intensity of color formed in the test line of the AAS-positive sample was visually distinguishable from that of negative sample within 10 min. The optimized closed direct and indirect format of the test provided a similar visual detection limit (0.7 and 0.9 ng/mL, respectively). The most commonly orally abused AAS (17α-methyltestosterone, methandienone, methyldihydrotestosterone, oxandrolone and oxymetholone) showed a strong cross-reaction. Developed immunostrips were successfully applied to analysis of artificially contaminated dietary supplements with 17α-methylated AASs. The developed immunostrips offer potential as a useful user-friendly method for capturing suspicious dietary supplement samples with different contents of AAS at levels far below the usually used concentrations of AAS.

Recent advances in sensitive surface-enhanced Raman scattering-based lateral flow assay platforms for point-of-care diagnostics of infectious diseases

This review reports the recent advances in surface-enhanced Raman scattering (SERS)-based lateral flow assay (LFA) platforms for the diagnosis of infectious diseases. As observed through the recent infection outbreaks of COVID-19 worldwide, a timely diagnosis of the disease is critical for preventing the spread of a disease and to ensure epidemic preparedness. In this regard, an innovative point-of-care diagnostic method is essential. Recently, SERS-based assay platforms have received increasing attention in medical communities owing to their high sensitivity and multiplex detection capability. In contrast, LFAs provide a user-friendly and easily accessible sensing platform. Thus, the combination of LFAs with a SERS detection system provides a new diagnostic modality for accurate and rapid diagnoses of infectious diseases. In this context, we briefly discuss the recent application of LFA platforms for the POC diagnosis of SARS-CoV-2. Thereafter, we focus on the recent advances in SERS-based LFA platforms for the early diagnosis of infectious diseases and their applicability for the rapid diagnosis of SARS-CoV-2. Finally, the key issues that need to be addressed to accelerate the clinical translation of SERS-based LFA platforms from the research laboratory to the bedside are discussed.

Recent advances in sensitivity enhancement for lateral flow assay

Conventional lateral flow assay (LFA) is typically performed by observing the color changes in the test lines by naked eyes, which achieves considerable commercial success and has a significant impact on the fields of food safety, environment monitoring, disease diagnosis, and other applications. However, this qualitative detection method is not very suitable for low levels of disease biomarkers' detection. Although many nanomaterials are used as new labels for LFA, additional readers limit their application to some extent. Fortunately, a lot of work has been done for improving the sensitivity of LFA. In this review, currently reported LFA sensitivity enhancement methods with an objective evaluation are summarized, such as sample pretreatment, the change of flow rate, and label evolution, and future development direction and challenges of LFAs are discussed.

Tutorial: design and fabrication of nanoparticle-based lateral-flow immunoassays

Lateral-flow assays (LFAs) are quick, simple and cheap assays to analyze various samples at the point of care or in the field, making them one of the most widespread biosensors currently available. They have been successfully employed for the detection of a myriad of different targets (ranging from atoms up to whole cells) in all type of samples (including water, blood, foodstuff and environmental samples). Their operation relies on the capillary flow of the sample throughout a series of sequential pads, each with different functionalities aiming to generate a signal to indicate the absence/presence (and, in some cases, the concentration) of the analyte of interest. To have a user-friendly operation, their development requires the optimization of multiple, interconnected parameters that may overwhelm new developers. In this tutorial, we provide the readers with: (i) the basic knowledge to understand the principles governing an LFA and to take informed decisions during lateral flow strip design and fabrication, (ii) a roadmap for optimal LFA development independent of the specific application, (iii) a step-by-step example procedure for the assembly and operation of an LF strip for the detection of human IgG and (iv) an extensive troubleshooting section addressing the most frequent issues in designing, assembling and using LFAs. By changing only the receptors, the provided example procedure can easily be adapted for cost-efficient detection of a broad variety of targets.

Development and application of a colloidal carbon test strip for the detection of antibodies against Mycoplasma bovis

Mycoplasma bovis (M. bovis) is an important bovine mycoplasma implicated in economically important clinical diseases, such as respiratory diseases, otitis media, and mastitis. The prevalence of M. bovis-associated mastitis in both cattle and buffaloes has been increasingly recognized as a global problem. High morbidity rates and consequential economic losses have been devastating to the affected cattle and buffalo farms, especially those in developing countries. Therefore, a rapid and accurate method is urgently needed to detect M. bovis. In this study, a rapid and simple lateral flow strip for detecting antibodies against M. bovis was established that used carbon nanoparticles (CNPs) as the labelled materials. The results from the test strip were highly consistent with those from ELISA. The test showed high specificity (100%) and no cross-reaction with other bovine pathogens. The detection sensitivity of the test was also relatively high (97.67%). All the results indicated that the colloidal carbon test strip could serve as a simple, rapid, sensitive, and specific diagnostic method for detecting antibodies against M. bovis at cattle farms.

Signal amplification and quantification on lateral flow assays by laser excitation of plasmonic nanomaterials

Lateral flow assay (LFA) has become one of the most widely used point-of-care diagnostic methods due to its simplicity and low cost. While easy to use, LFA suffers from its low sensitivity and poor quantification, which largely limits its applications for early disease diagnosis and requires further testing to eliminate false-negative results. Over the past decade, signal enhancement strategies that took advantage of the laser excitation of plasmonic nanomaterials have pushed down the detection limit and enabled quantification of analytes. Significantly, these methods amplify the signal based on the current LFA design without modification. This review highlights these strategies of signal enhancement for LFA including surface enhanced Raman scattering (SERS), photothermal and photoacoustic methods. Perspectives on the rational design of the reader systems are provided. Future translation of the research toward clinical applications is also discussed.

Potential Utility of Metal-Organic Framework-Based Platform for Sensing Pesticides

The progress in modern agricultural practices could not have been realized without the large-scale contribution of assorted pesticides (e.g., organophosphates and nonorganophosphates). Precise tracking of these chemicals has become very important for safeguarding the environment and food resources owing to their very high toxicity. Hence, the development of sensitive and convenient sensors for the on-site detection of pesticides is imperative to overcome practical limitations encountered in conventional methodologies, which require skilled manpower at the expense of high cost and low portability. In this regard, the role of novel, advanced functional materials such as metal-organic frameworks (MOFs) has drawn great interest as an alternative for conventional sensory systems because of their numerous advantages over other nanomaterials. This review was organized to address the recent advances in applications of MOFs for sensing various pesticides because of their tailorable optical and electrical characteristics. It also provides in-depth comparison of the performance of MOFs with other nanomaterial sensing platforms. Further, we discuss the present challenges (e.g., potential bias due to instability under certain conditions, variations in the diffusion rate of the pesticide, chemical interferences, and the precise measurement of luminesce quenching) in developing robust and sensitive sensors by using tailored porosity, functionalities, and better framework stability.

Exploring ozonation as treatment alternative for methiocarb and formed transformation products abatement

Despite the high toxicity and resistance to conventional water treatments exhibited by methiocarb (MC), there are no reports regarding the degradation of this priority pesticide by means of alternative purification technologies. In this work, the removal of MC by means of ozonation was studied for the first time, employing a multi-reactor methodology and neutral pH conditions. The second-order rate constants of MC reaction with molecular ozone (O₃) and formed hydroxyl radicals (OH·) were determined to be 1.7·10⁶ and 8.2·10⁹ M^-1 s^-1, respectively. During degradation experiments, direct ozone reaction was observed to effectively remove MC, but not its formed intermediates, whereas OH· could oxidize all species. The major identified TPs were methiocarb sulfoxide (MCX), methiocarb sulfoxide phenol (MCXP) and methiocarb sulfone phenol (MCNP), all of them formed through MC oxidation by O₃ or OH· in combination with hydrolysis. A toxicity assessment evidenced a strong dependence on MCX concentration, even at very low values. Despite the OH· capability to degrade MC and its main metabolites, the relative resistance of TPs towards ozone attack enlarged the oxidant dosage (2.5 mg O₃/mg DOC) necessary to achieve a relatively low toxicity of the medium. Even though ozonation could be a suitable technique for MC removal from water compartments, strategies aimed to further promote the indirect contribution of hydroxyl radicals during this process should be explored.

Multiplex Lateral Flow Immunoassays Based on Amorphous Carbon Nanoparticles for Detecting Three Fusarium Mycotoxins in Maize

The detecting labels used for lateral flow immunoassays (LFAs) have been traditionally gold nanoparticles (GNPs) and, more recently, luminescent nanoparticles, such as quantum dots (QDs). However, these labels have low sensitivity and are costly, in particular, for trace detection of mycotoxins in cereals. Here, we provided a simple preparation procedure for amorphous carbon nanoparticles (ACNPs) and described multiplex LFAs employing ACNPs as labels (ACNP-LFAs) for detecting three Fusarium mycotoxins. The analytical performance of ACNPs in LFA was compared to GNPs and QDs using the same immunoreagents, except for the labels, allowing for their analytical characteristics to be objectively compared. The visual limit of detection for ACNP-LFAs in buffer was 8-fold better than GNPs and 2-fold better than QDs. Under optimized conditions, the quantitative limit of detection of ACNP-LFAs in maize was as low as 20 μg/kg for deoxynivalenol, 13 μg/kg for T-2 toxin, and 1 μg/kg for zearalenone. These measurements were much lower than the action level of these mycotoxins in maize. The accuracy and precision of the ACNP-LFAs were evaluated by analysis of spiked and incurred maize samples with recoveries of 84.6-109% and coefficients of variation below 13%. The results of ACNP-LFAs using naturally incurred maize samples showed good agreement with results from high-performance liquid chromatography-tandem mass spectrometry, indicating that ACNPs were more sensitive labels than and a promising alternative to GNPs used in LFAs for detecting mycotoxins in cereals.

Recent advancements in lateral flow immunoassays: A journey for toxin detection in food

Biotechnology embraces various physical and chemical phenomena toward advancement of health diagnostics. Toward such advancement, detection of toxins plays an important role. Toxins produce severe health impacts on consumption with high mortality associated in acute cases. The most prominent route of infection and intoxication is through food matrices. Therefore, rapid detection of toxins at low concentrations is the need of modern diagnostics. Lateral flow immunoassays are one of the emergent and popularly used rapid detection technology developed for detecting various kinds of analytes. This review thus focuses on recent advancements in lateral flow immunoassays for detecting different toxins in agricultural food. Appropriate emphasis was given on how the labels, recognition elements, or detection strategy has laid an impact on improvement in immunochromatographic assays for toxins. The paper also discusses the gradual change in sensitivities and specificities of assays in accordance with the method of food processing used. The review concludes with the major challenges faced by this technology and provides an outlook and insight of ideas to improve it in the future.

Graphene oxide and carboxylated graphene oxide: Viable two-dimensional nanolabels for lateral flow immunoassays

Graphene oxide (GO) and carboxylated GO were used as labels for lateral flow immunoassays, instead of the conventionally used colloidal gold and colored latex labels. A sensor is demonstrated that enables fast screening for aflatoxin B₁ (AFB₁) as a model analyte using the antibody-GO complex as the recognition element. The visual limit of detection and cut-off value for AFB₁ are 0.3 and 1ng/mL, respectively. It is shown that GO and carboxylated GO are viable black labels for use in lateral flow assays, one typical advantage being the saving cost (compared to the use of colloidal gold). Qualitative results are achieved within 15min, and the analytical results were in good agreement with the reference LC MS/MS method. The method was successfully applied to the on-site determination of AFB₁ in agricultural products. In our perception, it opens new possibilities for the screening of other toxins by lateral flow immunoassays using GO and carboxylated GO as labels.

Application of a SERS-based lateral flow immunoassay strip for the rapid and sensitive detection of staphylococcal enterotoxin B

A novel surface-enhanced Raman scattering (SERS)-based lateral flow immunoassay (LFA) biosensor was developed to resolve problems associated with conventional LFA strips (e.g., limits in quantitative analysis and low sensitivity). In our SERS-based biosensor, Raman reporter-labeled hollow gold nanospheres (HGNs) were used as SERS detection probes instead of gold nanoparticles. With the proposed SERS-based LFA strip, the presence of a target antigen can be identified through a colour change in the test zone. Furthermore, highly sensitive quantitative evaluation is possible by measuring SERS signals from the test zone. To verify the feasibility of the SERS-based LFA strip platform, an immunoassay of staphylococcal enterotoxin B (SEB) was performed as a model reaction. The limit of detection (LOD) for SEB, as determined with the SERS-based LFA strip, was estimated to be 0.001 ng mL(-1). This value is approximately three orders of magnitude more sensitive than that achieved with the corresponding ELISA-based method. The proposed SERS-based LFA strip sensor shows significant potential for the rapid and sensitive detection of target markers in a simplified manner.

Development and comparison of immunochromatographic strips with three nanomaterial labels: Colloidal gold, nanogold-polyaniline-nanogold microspheres (GPGs) and colloidal carbon for visual detection of salbutamol

In this study, the three nanomaterials: colloidal gold, nanogold-polyaniline-nanogold microspheres (GPGs) and colloidal carbon were respectively labeled with the antibody against salbutamol (SAL). We aimed to develop immunochromatographic strips with these nanomaterial labels and determine their performance in visual detection of SAL. For the colloidal gold-based strip, the detection limit of SAL was 1.0µgL(-1) in standard solution and 5.0µgkg(-1) in meat samples. For the GPG- and colloidal carbon-based strips, the limit of detection was 2.0µgL(-1) in standard solution and 10µgkg(-1) in meat samples. The results obtained using the test strips were found to be highly consistent with those obtained using a commercial kit, indicating the high accuracy of these strips. The three strips were also found to be stable up to 18 weeks under laboratory conditions. In terms of sensitivity, the colloidal gold-based strip was slightly better than the other two. For the GPG- and colloidal carbon-based strips, the difference between the results obtained for different batches was small (high consistency), and the stability was much better than that of the colloidal gold-based one. Our results indicate that colloidal carbon can be used as a label in immunochromatographic tests; it can also help reduce the cost involved and scale-up the production. The use of immunochromatographic test strips labeled with colloidal carbon can be a rapid and inexpensive method for SAL assays in on-site applications.

Synthesis and sensing applications of a new fluorescent derivative of cholesterol

The Hg²⁺ quenched emission of a specially designed fluorophore could be fully turned on upon the introduction of organophosphorus pesticides.

Toward point-of-care diagnostics with consumer electronic devices: the expanding role of nanoparticles

A review of the role that nanoparticles can play in point-of-care diagnostics that utilize consumer electronic devices such as cell phones and smartphones for readout, including an overview of important concepts and examples from the literature.

Nano-gold capillary immunochromatographic assay for parvalbumin

A novel non-instrumental bioanalysis based on colloidal-gold immunochromatography in a modified glass capillary was developed and named capillary immunochromatographic assay (CICA). In this report, glass capillary was proposed as a support in immunochromatographic assay because of its excellent characteristics. Goat anti-rabbit IgG and parvalbumin (PV) were immobilized on the inner wall of the glass capillary as control zone and test zone, respectively. The CICA was constructed, and main variables for the performance were optimized. Using an important allergen of fish products (parvalbumin, PV) as the target, the analytical efficiency of the developed technique was investigated and the visual detection limit (VDL) and semi-quantitative limit of detection (LOD) were estimated to be 70 ng mL(-1) and 40 ng mL(-1), respectively. The coefficient of variation (CV) for the intra-assay and inter-assay was calculated for the PV concentration of 50 ng mL(-1), and the entire operation, including sample preparation, was consistently performed in 30 min. The developed technique was implemented and validated with different foodstuffs, including Scophthalmus maximus (Linnaeus), surimi products, and livestock, confirming sufficient accuracy and precision of results and verifying the method to be efficacious. These results enabled us to propose CICA as a new and promising technique for simple, rapid, and on-site screening of PV in biological samples.

Development of an immunochromatographic assay based on carbon nanoparticles for the determination of the phytoregulator forchlorfenuron

Rapid analytical methods enabling the determination of diverse targets are essential in a number of research areas, from clinical diagnostics to feed and food quality and safety. Herein, the development of a quantitative immunochromatographic assay for the detection of the synthetic phytoregulator forchlorfenuron (CPPU) is described. The competitive lateral flow immunoassay (LFIA) was based on the immobilization onto a nitrocellulose membrane of an ovalbumin-CPPU conjugate (test line) and on the use of an immunodetection ligand consisting of carbon nanoparticles labeled with an anti-CPPU monoclonal antibody through interaction with a secondary antibody. The presence of CPPU in horticultural samples was visually interpreted by the decrease in the black signal intensity of the test line, according to the competitive character of the format. The quantitative determination of the analyte was easily performed by a two-step procedure consisting of flatbed scanning of the strips followed by computer-based image analysis of the pixel gray volumes of the test lines. Under optimized conditions, the immunochromatographic test afforded a limit of quantification in buffer of 89 ng/L. The accuracy of the strip test was assessed by the analysis of fruit samples with incurred residues, and the obtained results were compared with those derived from two reference methods, ELISA and HPLC. The LOQ of the CPPU-specific LFIA in kiwifruits and grapes was established at 33.4 μg/kg. The excellent analytical performance of the developed strip test demonstrates the potential of immunochromatographic assays for the quantitative monitoring of small organic molecules in complex matrices.

Amorphous carbon nanoparticles: a versatile label for rapid diagnostic (immuno)assays

Carbon nanoparticles (CNPs) labeled with reporter molecules can serve as signaling labels in rapid diagnostic assays as an alternative to gold, colored latex, silica, quantum dots, or up-converting phosphor nanoparticles. Detailed here is the preparation of biomolecule-labeled CNPs and examples of their use as a versatile label. CNPs can be loaded with a range of biomolecules, such as DNA, antibodies, and proteins (e.g., neutravidin or a fusion protein of neutravidin with an enzyme), and the resulting conjugates can be used to detect analytes of high or low molecular mass.