A microbial fuel cell as power supply for implantable medical devices

State-of-the-art and future perspectives in ingestible remotely controlled smart capsules for drug delivery: A GENEGUT review

An emerging concern globally, particularly in developed countries, is the rising prevalence of Inflammatory Bowel Disease (IBD), such as Crohn's disease. Oral delivery technologies that can release the active therapeutic cargo specifically at selected sites of inflammation offer great promise to maximise treatment outcomes and minimise off-target effects. Therapeutic strategies for IBD have expanded in recent years, with an increasing focus on biologic and nucleic acid-based therapies. Reliable site-specific delivery in the gastrointestinal (GI) tract is particularly crucial for these therapeutics to ensure sufficient concentrations in the targeted cells. Ingestible smart capsules hold great potential for precise drug delivery. Despite previous unsuccessful endeavours to commercialise drug delivery smart capsules, the current rise in demand and recent advancements in component development, manufacturing, and miniaturisation have reignited interest in ingestible devices. Consequently, this review analyses the advancements in various mechanical and electrical components associated with ingestible smart drug delivery capsules. These components include modules for device localisation, actuation and retention within the GI tract, signal transmission, drug release, power supply, and payload storage. Challenges and constraints associated with previous capsule design functionality are presented, followed by a critical outlook on future design considerations to ensure efficient and reliable site-specific delivery for the local treatment of GI disorders.

A Battery Method to Enhance the Degradation of Iron Stent and Regulating the Effect on Living Cells

Iron is a promising material for cardiovascular stent applications, however, the low biodegradation rate presents a challenge. Here, a dynamic method to improve the degradation rate of iron and simultaneously deliver electrical energy that could potentially inhibit cell proliferation on the device is reported. It is realized by pairing iron with a biocompatible hydrogel cathode in a cell culture media-based electrolyte forming an iron-air battery. This system does not show cytotoxicity to human adipose-stem cells over a period of 21 days but inhibits cell proliferation. The combination of enhanced iron degradation and inhibited cell proliferation by this dynamic method suggests it might be an approach for restenosis inhibition of biodegradable stents.

Biosensors Based on Bio-Functionalized Semiconducting Metal Oxides

Immobilization of biomaterials is a very important task in the development of biofuel cells and biosensors. Some semiconducting metal-oxide-based supporting materials can be used in these bioelectronics-based devices. In this article, we are reviewing some functionalization methods that are applied for the immobilization of biomaterials. The most significant attention is paid to the immobilization of biomolecules on the surface of semiconducting metal oxides. The improvement of biomaterials immobilization on metal oxides and analytical performance of biosensors by coatings based on conducting polymers, self-assembled monolayers and lipid membranes is discussed.

Powering Implantable and Ingestible Electronics

Implantable and ingestible biomedical electronic devices can be useful tools for detecting physiological and pathophysiological signals, and providing treatments that cannot be done externally. However, one major challenge in the development of these devices is the limited lifetime of their power sources. The state-of-the-art of powering technologies for implantable and ingestible electronics is reviewed here. The structure and power requirements of implantable and ingestible biomedical electronics are described to guide the development of powering technologies. These powering technologies include novel batteries that can be used as both power sources and for energy storage, devices that can harvest energy from the human body, and devices that can receive and operate with energy transferred from exogenous sources. Furthermore, potential sources of mechanical, chemical, and electromagnetic energy present around common target locations of implantable and ingestible electronics are thoroughly analyzed; energy harvesting and transfer methods befitting each energy source are also discussed. Developing power sources that are safe, compact, and have high volumetric energy densities is essential for realizing long-term in-body biomedical electronics and for enabling a new era of personalized healthcare.

Charge Transfer and Biocompatibility Aspects in Conducting Polymer-Based Enzymatic Biosensors and Biofuel Cells

Charge transfer (CT) is a very important issue in the design of biosensors and biofuel cells. Some nanomaterials can be applied to facilitate the CT in these bioelectronics-based devices. In this review, we overview some CT mechanisms and/or pathways that are the most frequently established between redox enzymes and electrodes. Facilitation of indirect CT by the application of some nanomaterials is frequently applied in electrochemical enzymatic biosensors and biofuel cells. More sophisticated and still rather rarely observed is direct charge transfer (DCT), which is often addressed as direct electron transfer (DET), therefore, DCT/DET is also targeted and discussed in this review. The application of conducting polymers (CPs) for the immobilization of enzymes and facilitation of charge transfer during the design of biosensors and biofuel cells are overviewed. Significant attention is paid to various ways of synthesis and application of conducting polymers such as polyaniline, polypyrrole, polythiophene poly(3,4-ethylenedioxythiophene). Some DCT/DET mechanisms in CP-based sensors and biosensors are discussed, taking into account that not only charge transfer via electrons, but also charge transfer via holes can play a crucial role in the design of bioelectronics-based devices. Biocompatibility aspects of CPs, which provides important advantages essential for implantable bioelectronics, are discussed.

Simultaneous wastewater treatment and energy harvesting in microbial fuel cells: an update on the biocatalysts

The development of microbial fuel cell (MFC) makes it possible to generate clean electricity as well as remove pollutants from wastewater. Extensive studies on MFC have focused on structural design and performance optimization, and tremendous advances have been made in these fields. However, there is still a lack of systematic analysis on biocatalysts used in MFCs, especially when it comes to pollutant removal and simultaneous energy recovery. In this review, we aim to provide an update on MFC-based wastewater treatment and energy harvesting research, and analyze various biocatalysts used in MFCs and their underlying mechanisms in pollutant removal as well as energy recovery from wastewater. Lastly, we highlight key future research areas that will further our understanding in improving MFC performance for simultaneous wastewater treatment and sustainable energy harvesting.

Enhancement of biological oxygen demand detection with a microbial fuel cell using potassium permanganate as cathodic electron acceptor

When dual-chamber microbial fuel cell (MFC) is used to detect biochemical oxygen demand (BOD), dissolved oxygen is traditionally used as cathodic electron acceptor. The detection limit of this MFC-based BOD biosensor is usually lower than 200 mg/L. In this paper, the startup of MFC-based BOD biosensor was researched and the external resistor of MFC was optimized. Results showed that the MFC started up with the dissolved oxygen as cathodic electron acceptor within 10 d, and the external resistor was optimized as 500 Ω to ensure the maximum output power of MFC. Dissolved oxygen and potassium permanganate (KMnO₄) were used as cathodic electron acceptor to run MFC for detection of wastewater BOD, and the performances of two kinds of BOD biosensors were compared. The MFC-based BOD biosensor using KMnO₄ (10 mmol/L) as cathodic electron acceptor exhibited an excellent performance, compared with that using dissolved oxygen. The upper limit of BOD detection was greatly broadened to 500 mg/L, the response time was shortened by 50% for artificial wastewater with a BOD of 100 mg/L, and the relative error of BOD detection was reduced to less than 10%. The MFC-based BOD biosensor using KMnO₄ as cathodic electron acceptor showed a better linear relationship (R² > 0.992) between the electric charge and BOD concentration within a BOD range of 25-500 mg/L. The MFC-based BOD biosensor using the KMnO₄ as cathodic electron acceptor is promising with a better application prospect.

A Critical View of Microbial Fuel Cells: What Is the Next Stage?

Microbial fuel cells (MFCs) have garnered interest from the scientific community since the beginning of this century and this has caused a considerable increase in the scientific production of MFCs. However, the ability of MFCs to generate power has not increased considerably within this timeframe. In recent years, the power generated by MFCs has remained at an almost contact level owing to difficulties in the scale-up of the technology and thus the application of MFCs for powering systems with high energy demands will not be fully developed, at least within a short temporal horizon. Scale-up by increasing the size of the electrodes has failed, because of the wrong assumption that a linear function describes the relationship between the amount of power generated by a MFC and its size. However, more efficient energy generation upon working with small MFCs has been described. This has led to a new approach for scaling up on the basis of miniaturization and replication. Then, MFCs can be connected electrically in series to increase the overall potential and in parallel to increase the overall current. However, cell-voltage reversal and ionic short-circuit issues must be solved for this approach to be successful. Nowadays, the applicability of MFC technology in wastewater treatment does not make any sense in light of the power levels reached, despite the fact that MFCs were seen as a paramount opportunity less than a decade ago. However, MFCs can be used for wastewater treatment with coupled energy generation, as well as for other technologies such as biosensors and biologically inspired robots.

A comprehensive overview on electro-active biofilms, role of exo-electrogens and their microbial niches in microbial fuel cells (MFCs)

Microbial fuel cells (MFCs) are biocatalyzed systems which can drive electrical energy by directly converting chemical energy using microbial biocatalyst and are considered as one of the important propitious technologies for sustainable energy production. Much research on MFCs experiments is under way with great potential to become an alternative to produce clean energy from renewable waste. MFCs have been one of the most promising technologies for generating clean energy industry in the future. This article summarizes the important findings in electro-active biofilm formation and the role of exo-electrogens in electron transfer in MFCs. This study provides and brings special attention on the effects of various operating and biological parameters on the biofilm formation in MFCs. In addition, it also highlights the significance of different molecular techniques used in the microbial community analysis of electro-active biofilm. It reviews the challenges as well as the emerging opportunities required to develop MFCs at commercial level, electro-active biofilms and to understand potential application of microbiological niches are also depicted. Thus, this review is believed to widen the efforts towards the development of electro-active biofilm and will provide the research directions to overcome energy and environmental challenges.

Effect of growth solution, membrane size and array connection on microbial fuel cell power supply for medical devices

Implanted biomedical devices typically last a number of years before their batteries are depleted and a surgery is required to replace them. A Microbial Fuel Cell (MFC) is a device which by using bacteria, directly breaks down sugars to generate electricity. Conceptually there is potential to continually power implanted medical devices for the lifetime of a patient. To investigate the practical potential of this technology, H-Cell Dual Chamber MFCs were evaluated with two different growth solutions and measurements recorded for maximum power output both of individual MFCs and connected MFCs. Using Luria-Bertani media and connecting MFCs in a hybrid series and parallel arrangement with larger membrane sizes showed the highest power output and the greatest potential for replacing implanted batteries.

Carbon-Based Microbial-Fuel-Cell Electrodes: From Conductive Supports to Active Catalysts

Microbial fuel cells (MFCs) have attracted considerable interest due to their potential in renewable electrical power generation using the broad diversity of biomass and organic substrates. However, the difficulties in achieving high power densities and commercially affordable electrode materials have limited their industrial applications to date. Carbon materials, which can exhibit a wide range of different morphologies and structures, usually possess physiological activity to interact with microorganisms and are therefore fast-emerging electrode materials. As the anode, carbon materials can significantly promote interfacial microbial colonization and accelerate the formation of extracellular biofilms, which eventually promotes the electrical power density by providing a conductive microenvironment for extracellular electron transfer. As the cathode, carbon-based materials can function as catalysts for the oxygen-reduction reaction, showing satisfying activities and efficiencies nowadays even reaching the performance of Pt catalysts. Here, first, recent advancements on the design of carbon materials for anodes in MFCs are summarized, and the influence of structure and surface functionalization of different types of carbon materials on microorganism immobilization and electrochemical performance is elucidated. Then, synthetic strategies and structures of typical carbon-based cathodes in MFCs are briefly presented. Furthermore, future applications of carbon-electrode-based MFC devices in the energy, environmental, and biological fields are discussed, and the emerging challenges in transferring them from laboratory to industrial scale are described.

A Terrestrial Microbial Fuel Cell for Powering a Single-Hop Wireless Sensor Network

Microbial fuel cells (MFCs) are envisioned as one of the most promising alternative renewable energy sources because they can generate electric current continuously while treating waste. Terrestrial Microbial Fuel Cells (TMFCs) can be inoculated and work on the use of soil, which further extends the application areas of MFCs. Energy supply, as a primary influential factor determining the lifetime of Wireless Sensor Network (WSN) nodes, remains an open challenge in sensor networks. In theory, sensor nodes powered by MFCs have an eternal life. However, low power density and high internal resistance of MFCs are two pronounced problems in their operation. A single-hop WSN powered by a TMFC experimental setup was designed and experimented with. Power generation performance of the proposed TMFC, the relationships between the performance of the power generation and the environment temperature, the water content of the soil by weight were measured by experiments. Results show that the TMFC can achieve good power generation performance under special environmental conditions. Furthermore, the experiments with sensor data acquisition and wireless transmission of the TMFC powering WSN were carried out. We demonstrate that the obtained experimental results validate the feasibility of TMFCs powering WSNs.

Experimenting with microbial fuel cells for powering implanted biomedical devices

Microbial Fuel Cell (MFC) technology has the ability to directly convert sugar into electricity by using bacteria. Such a technology could be useful for powering implanted biomedical devices that require a surgery to replace their batteries every couple of years. In steps towards this, parameters such as electrode configuration, inoculation size, stirring of the MFC and single versus dual chamber reactor configuration were tested for their effect on MFC power output. Results indicate that a Top-Bottom electrode configuration, stirring and larger amounts of bacteria in single chamber MFCs, and smaller amounts of bacteria in dual chamber MFCs give increased power outputs. Finally, overall dual chamber MFCs give several fold larger MFC power outputs.

A gold microarray electrode on a poly(methylmethacrylate) substrate to improve the performance of microbial fuel cells by modifying biofilm formation

A gold line microarray anode deposited on PMMA substrate could significantly form effective biofilm to improve the performance of MFCs.

Characterization of a microfluidic microbial fuel cell as a power generator based on a nickel electrode

This study reports the fabrication of a microfluidic microbial fuel cell (MFC) using nickel as a novel alternative for conventional electrodes and a non-phatogenic strain of Escherichia coli as the biocatalyst. The feasibility of a microfluidic MFC as an efficient power generator for production of bioelectricity from glucose and urea as organic substrates in human blood and urine for implantable medical devices (IMDs) was investigated. A maximum open circuit potential of 459 mV was achieved for the batch-fed microfluidic MFC. During continuous mode operation, a maximum power density of 104 Wm(-3) was obtained with nutrient broth. For the glucose-fed microfluidic MFC, the maximum power density of 5.2 μW cm(-2) obtained in this study is significantly greater than the power densities reported previously for microsized MFCs and glucose fuel cells. The maximum power density of 14 Wm(-3) obtained using urea indicates the successful performance of a microfluidic MFC using human excreta. It features high power density, self-regeneration, waste management and a low production cost (<$1), which suggest it as a promising alternative to conventional power supplies for IMDs. The performance of the microfluidic MFC as a power supply was characterized based on polarization behavior and cell potential in different substrates, operational modes, and concentrations.

Microscale microbial fuel cells: Advances and challenges

The next generation of sustainable energy could come from microorganisms; evidence that it can be seen with the given rise of Electromicrobiology, the study of microorganisms' electrical properties. Many recent advances in electromicrobiology stem from studying microbial fuel cells (MFCs), which are gaining acceptance as a future alternative "green" energy technology and energy-efficient wastewater treatment method. MFCs are powered by living microorganisms with clean and sustainable features; they efficiently catalyse the degradation of a broad range of organic substrates under natural conditions. There is also increasing interest in photosynthetic MFCs designed to harness Earth's most abundant and promising energy source (solar irradiation). Despite their vast potential and promise, however, MFCs and photosynthetic MFCs have not yet successfully translated into commercial applications because they demonstrate persistent performance limitations and bottlenecks associated with scaling up. Instead, microscale MFCs have received increasing attention as a unique platform for various applications such as powering small portable electronic elements in remote locations, performing fundamental studies of microorganisms, screening bacterial strains, and toxicity detection in water. Furthermore, the stacking of miniaturized MFCs has been demonstrated to offer larger power densities than a single macroscale MFC in terms of scaling up. In this overview, we discuss recent achievements in microscale MFCs as well as their potential applications. Further scientific and technological challenges are also reviewed.

Biofuel cells for biomedical applications: colonizing the animal kingdom

Interdisciplinary research has combined the efforts of many scientists and engineers to gain an understanding of biotic and abiotic electrochemical processes, materials properties, biomedical, and engineering approaches for the development of alternative power-generating and/or energy-harvesting devices, aiming to solve health-related issues and to improve the quality of human life. This review intends to recapitulate the principles of biofuel cell development and the progress over the years, thanks to the contribution of cross-disciplinary researchers that have combined knowledge and innovative ideas to the field. The emergence of biofuel cells, as a response to the demand of electrical power devices that can operate under physiological conditions, are reviewed. Implantable biofuel cells operating inside living organisms have been envisioned for over fifty years, but few reports of implanted devices have existed up until very recently. The very first report of an implanted biofuel cell (implanted in a grape) was published only in 2003 by Adam Heller and his coworkers. This work was a result of earlier scientific efforts of this group to "wire" enzymes to the electrode surface. The last couple of years have, however, seen a multitude of biofuel cells being implanted and operating in different living organisms, including mammals. Herein, the evolution of the biofuel concept, the understanding and employment of catalyst and biocatalyst processes to mimic biological processes, are explored. These potentially green technology biodevices are designed to be applied for biomedical applications to power nano- and microelectronic devices, drug delivery systems, biosensors, and many more.

Microbial fuel cell as power supply for implantable medical devices: a novel configuration design for simulating colonic environment

This study focused on providing power for implantable medical devices (IMDs) using a microbial fuel cell (MFC) implanted in human transverse colon. Considering the condition of colonic environment, a continuous-flow single-chamber MFC without membrane was set up. The performance of the MFC was investigated. The power output of 1.6 mW under the steady state was not rich enough for some high energy-consuming IMDs. Moreover, the parameters of the simulated colonic environment, such as pH and ORP value, varied along with the time. Hence, a new MFC configuration was developed. In this novel model, pH transducers were placed in cathodic and anodic areas, so as to regulate the reactor operation timely via external intervention. And two ORP transducers were inserted next to the pH transducers, for monitoring and adjusting the MFC operation efficiently. Besides, colonic haustra were designed in order to increase the difference between cathodic and anodic areas.

Iron phthalocyanine supported on amino-functionalized multi-walled carbon nanotube as an alternative cathodic oxygen catalyst in microbial fuel cells

Amino-functionalized multi-walled carbon nanotube (a-MWCNT)-supported iron phthalocyanine (FePc) (a-MWCNT/FePc) has been investigated as a catalyst for the oxygen reduction reaction (ORR) in an air-cathode single-chambered microbial fuel cell (MFC). Cyclic and linear sweep voltammogram are employed to investigate the electrocatalytic activity of the a-MWCNT/FePc for ORR. The maximum power density of 601 mWm(-2) is achieved from a MFC with the a-MWCNT/FePc cathode, which is the highest energy output compared to those MFCs with other materials supported FePc, such as carbon black, pristine MWCNT (p-MWCNT), carboxylic acid functionalized MWCNT (c-MWCNT), and even with a Pt/C cathode. Furthermore, cyclic voltammetry performed on the a-MWCNT/FePc electrode suggests that the a-MWCNT/FePc has an electrochemical activity for ORR via a four-electron pathway in a neutral pH solution. This work provides a potential alternative to Pt in MFCs for sustainable energy generation.