Enlarged gold-tipped silicon microprobe arrays and signal compensation for multi-site electroretinogram recordings in the isolated carp retina

Nanoneedle-Electrode Devices for In Vivo Recording of Extracellular Action Potentials

Microscale needle-like electrode technologies offer in vivo extracellular recording with a high spatiotemporal resolution. Further miniaturization of needles to nanoscale minimizes tissue injuries; however, a reduced electrode area increases electrical impedance that degrades the quality of neuronal signal recording. We overcome this limitation by fabricating a 300 nm tip diameter and 200 μm long needle electrode where the amplitude gain with a high-impedance electrode (>15 MΩ, 1 kHz) was improved from 0.54 (-5.4 dB) to 0.89 (-1.0 dB) by stacking it on an amplifier module of source follower. The nanoelectrode provided the recording of both local field potential (<300 Hz) and action potential (>500 Hz) in the mouse cortex, in contrast to the electrode without the amplifier. These results suggest that microelectrodes can be further minimized by the proposed amplifier configuration for low-invasive recording and electrophysiological studies in submicron areas in tissues, such as dendrites and axons.

Three-micrometer-diameter needle electrode with an amplifier for extracellular in vivo recordings

Microscale needle-electrode devices offer neuronal signal recording capability in brain tissue; however, using needles of smaller geometry to minimize tissue damage causes degradation of electrical properties, including high electrical impedance and low signal-to-noise ratio (SNR) recording. We overcome these limitations using a device assembly technique that uses a single needle-topped amplifier package, called STACK, within a device of ∼1 × 1 mm2 Based on silicon (Si) growth technology, a <3-µm-tip-diameter, 400-µm-length needle electrode was fabricated on a Si block as the module. The high electrical impedance characteristics of the needle electrode were improved by stacking it on the other module of the amplifier. The STACK device exhibited a voltage gain of >0.98 (-0.175 dB), enabling recording of the local field potential and action potentials from the mouse brain in vivo with an improved SNR of 6.2. Additionally, the device allowed us to use a Bluetooth module to demonstrate wireless recording of these neuronal signals; the chronic experiment was also conducted using STACK-implanted mice.

Multimodal Functional Analysis Platform: 2. Development of Si Opto-Electro Multifunctional Neural Probe with Multiple Optical Waveguides and Embedded Optical Fiber for Optogenetics

We have developed a Si opt-electro multifunctional neural probe with multiple waveguides and embedded optical fiber for highly accurate optical stimulation. The Si opt-electro multifunctional neural probe had 16 recording sites, three optical waveguides, and metal cover for suppressing light leakage. The other opt-electro multifunctional neural probe had an optical fiber in the trench of the probe shank, which leads to fewer damages to tissues. We evaluated the electrochemical properties of the recording sites and confirmed that the neural probe had suitable characteristics for neural recording. We also demonstrated the optical stimulation to the neurons expressing ChR2 using our probe. As a result, we succeeded in multisite optical stimulation and observed that no light leakage from the optical waveguides because of the metal cover. From in vivo experiments, we successfully recorded optically modulated local field potential using the fabricated Si neural probe with optical waveguides. Moreover, we applied current source density analysis to the recorded LFPs. As a result, we confirmed that the light-induced membrane current sinks in the locally stimulated area. The Si opto-electro multifunctional neural probe is one of the most versatile tools for optogenetics.

Single 5 μm diameter needle electrode block modules for unit recordings in vivo

Investigations into mechanisms in various cortical areas can be greatly improved and supported by stable recording of single neuronal activity. In this study, fine silicon wire electrodes (diameter 3 μm, length 160 μm) are fabricated by vapor–liquid–solid (VLS) growth with the aim of stabilizing recording and reducing the invasiveness on the measurement procedure. The electrode is fabricated on a modular 1 ×  1 mm² conductive silicon block that can be assembled into a number of different device packages, for example on rigid or flexible printed circuit boards (PCB). After plating with a 5 μm diameter platinum black, the needle exhibits an electrical impedance of ~100 kΩ at 1 kHz in saline. The in vivo recording capability of the device is demonstrated using mice, and spike signals with peak-to-peak amplitudes of 200−300 μV in the range 0.5−3 kHz are stably detected, including single-unit activities in cortical layer 2/3. In addition, the device packaged with a flexible PCB shows stable unit recordings for 98.5 min (n = 4). Consequently, our modular, low-invasive needle electrode block devices present an effective route for single-unit recordings in vivo, as well as demonstrating adaptability in device design for a diverse range of experiments.

Nanoscale-Tipped High-Aspect-Ratio Vertical Microneedle Electrodes for Intracellular Recordings

Intracellular recording nanoscale electrode devices provide the advantages of a high spatial resolution and high sensitivity. However, the length of nanowire/nanotube-based nanoelectrodes is currently limited to <10 μm long due to fabrication issues for high-aspect-ratio nanoelectrodes. The concept reported here can address the technological limitations by fabricating >100 μm long nanoscale-tipped electrodes, which show intracellular recording capability.

Multiple optical stimulation to neuron using Si opto-neural probe with multiple optical waveguides and metal-cover for optogenetics

We have developed a Si opt-neural probe with multiple waveguides and metal cover for highly accurate optical stimulation. This neural probe had 16 recording sites, three optical waveguides, and metal cover for suppressing light leakage. We evaluated electrochemical properties of the recording sites, and confirmed that the neural probe had suitable characteristics for neural recording. We also demonstrated the optical stimulation to the neurons expressing ChR2 using our probe. As a result, we succeeded multisite optical stimulation, and observed that no light leakage from the optical waveguides because of the metal cover. From in vivo experiments, we successfully recorded optically modulated local field potential using the fabricated Si neural probe with optical waveguides. Moreover, we applied current source density analysis to the recorded LFPs. As a result, we confirmed that light induced membrane current sink in locally stimulated area. Our Si opto-neural probe with multiple optical waveguides and metal-cover is one of the most versatile tools for optogenetics.

In vivo neuronal action potential recordings via three-dimensional microscale needle-electrode arrays

Very fine needle-electrode arrays potentially offer both low invasiveness and high spatial resolution of electrophysiological neuronal recordings in vivo. Herein we report the penetrating and recording capabilities of silicon-growth-based three-dimensional microscale-diameter needle-electrodes arrays. The fabricated needles exhibit a circular-cone shape with a 3-μm-diameter tip and a 210-μm length. Due to the microscale diameter, our silicon needles are more flexible than other microfabricated silicon needles with larger diameters. Coating the microscale-needle-tip with platinum black results in an impedance of ~600 kΩ in saline with output/input signal amplitude ratios of more than 90% at 40 Hz–10 kHz. The needles can penetrate into the whisker barrel area of a rat's cerebral cortex, and the action potentials recorded from some neurons exhibit peak-to-peak amplitudes of ~300 μV_pp. These results demonstrate the feasibility of in vivo neuronal action potential recordings with a microscale needle-electrode array fabricated using silicon growth technology.