Replacement-free mass-amplified sandwich assay with 180-MHz electrodeless quartz-crystal microbalance biosensor

Mass-Fabrication Scheme of Highly Sensitive Wireless Electrodeless MEMS QCM Biosensor with Antennas on Inner Walls of Microchannel

Quartz-crystal-microbalance (QCM) biosensor is a typical label-free biosensor, and its sensitivity can be greatly improved by removing electrodes and wires that would be otherwise attached to the surfaces of the quartz resonator. The wireless-electrodeless QCM biosensor was then developed using a microelectro-mechanical systems (MEMS) process, although challenges remain in the sensitivity, the coupling efficiency, and the miniaturization (or mass production). In this study, we establish a MEMS process to obtain a large number of identical ultrasensitive and highly efficient sensor chips with dimensions of 6 mm square. The fundamental shear resonance frequency of the thinned AT-cut quartz resonator packaged in the microchannel exceeds 160 MHz, which is excited by antennas deposited on inner walls of the microchannel, significantly improving the electro-mechanical coupling efficiency in the wireless operation. The high sensitivity of the developed MEMS QCM biosensors is confirmed by the immunoglobulin G (IgG) detection using protein A and ZZ-tag displaying a bionanocapsule (ZZ-BNC), where we find that the ZZ-BNC can provide more effective binding sites and higher affinity to the target molecules, indicating a further enhancement in the sensitivity of the MEMS QCM biosensor. We then perform the label-free C-reactive protein (CRP) detection using the ZZ-BNC-functionalized MEMS QCM biosensor, which achieves a detection limit of 1 ng mL^-1 or less even with direct detection.

Online regeneration of a piezoelectric and impedimetric immunosensor for the detection of C-reactive protein on the oriented antibody gold surface

Cardiovascular diseases (CVDs) refer to diseases that affect the heart and blood vessels. CVDs are considered silent killers, which are fatal (death occurs abruptly) particularly when their diagnosis is delayed. Among the biomarkers related to cardiovascular diseases, C-reactive protein (CRP) is expressed or found in high concentrations during a cardiac event. Therefore, CRP is an excellent biomarker to diagnose cardiac events, and therefore quantitative monitoring of CRP is necessary. Herein, we report the fabrication of an immunosensor for the detection and monitoring of CRP. The anti-CRP monoclonal antibody (anti-CRP-mAb), which is specific to the CRP antigen, was immobilized on the surface of gold pre-modified with 4-mercaptophenyl boronic acid (MPBA) to act as a capture antibody. The self-assembled monolayer (SAM) of 4-mercaptophenyl boronic acid (4-MPBA), Au-MPBA, was used for the oriented immobilization of anti-CRP-mAb for piezoelectric (mass-sensitive) and piezoelectric (impedance) measurements. Controlling the orientation of anti-CRP-mAb was crucial to eliminate false positive and negative results during sample analysis. The quartz-crystal microbalance with dissipation (QCM-D) measurements enabled us to follow the covalent immobilization of anti-CRP-mAb on AuCQC-MPBA in real-time. QCM-D was further used to follow the affinity reactions between anti-CRP-mAb and CRP and further with the anti-CRP polyclonal antibody (anti-CRP-pAb). The changes in frequency (Δf, Hz) were related to the changes in the mass (Δm, ng cm^-2) of CRP up to a concentration of 0.10 μg mL^-1, which is equivalent to 0.10 mg L^-1. CRP was detected using the direct affinity immunoassay (anti-CRP-mAb < CRP) and also a sandwich immunoassay using anti-CRP-pAb for signal enhancement. The developed piezoelectric CRP detection protocol was translated to a gold disc electrode for electrochemical impedance spectroscopy (EIS) measurements. The limit of detection (LOD) using both methods was at the μg mL^-1 or mg L^-1 level. Furthermore, the developed electrode could be regenerated using acidic buffer (0.10 M HCl). The detected signal could be reproduced to within 5% relative standard deviation (% RSD) in buffer and serum samples, showing excellent selectivity and specificity toward CRP.

A high-frequency QCM biosensing platform for label-free detection of the SARS-CoV-2 spike receptor-binding domain: an aptasensor and an immunosensor

Herein, high-frequency quartz crystal microbalance biosensing platforms were constructed using an aptamer and antibody as bioreceptors for fast and label-free detection of the SARS-CoV-2 RBD.

Ultrahigh-Frequency, Wireless MEMS QCM Biosensor for Direct, Label-Free Detection of Biomarkers in a Large Amount of Contaminants

Label-free biosensors, including conventional quartz-crystal-microbalance (QCM) biosensors, are seriously affected by nonspecific adsorption of contaminants involved in analyte solution, and it is exceptionally difficult to extract the sensor responses caused only by the targets. In this study, we reveal that this difficulty can be overcome with an ultrahigh-frequency, wireless QCM biosensor. The sensitivity of a QCM biosensor dramatically improves when the quartz resonator is thinned, which also makes the resonance frequency higher, causing high-speed surface movement. Contaminants weakly (nonspecifically) interact with the quartz surface, but they fail to follow the fast surface movement and cannot be detected as the loaded mass. The targets are, however, tightly captured by the receptor proteins immobilized on the surface, and they can move with the surface, contributing to the loaded mass and decreasing the resonant frequency. We have developed a MEMS QCM biosensor in which an AT-cut quartz resonator, 26 μm thick, is packaged without fixing, and we demonstrate this phenomenon by comparing the frequency changes of the fundamental (∼64 MHz) and ninth (∼576 MHz) modes. At ultrahigh-frequency operation with the ninth mode, the sensor response is independent of the amount of impurity proteins, and the binding affinity is unchanged. We then applied this method to the label-free and sandwich-free, direct detection of C-reactive protein (CRP) in serum and confirmed its applicability.

Unfound Associated Resonant Model and Its Impact on Response of a Quartz Crystal Microbalance in the Liquid Phase

Quartz crystal microbalance (QCM) is an important tool to detect in real time the mass change at the nanogram level. However, for a QCM operated in the liquid phase, the Sauerbrey equation is usually disturbed by the changes in liquid properties and the longitudinal wave effect. Herein, we report another unfound associated high-frequency resonance (HFR) model for the QCM, with the intensity 2 orders of magnitude higher than that of the fundamental peak in the liquid phase. The HFR model exhibits obvious impact on the response of QCM in the thickness-shear model (TSM), especially for overtones. The frequency of HFR peak is decreased dramatically with increasing conductivity or permittivity of the liquid phase, resulting in considerable additional frequency shifts in the TSM as baseline drift. Compared to that with a faraway HFR peak, the overlapping of HFR peak to a TSM overtone results in the frequency shifts of ±50-70 kHz with its intensity enhancement by 3 orders of magnitude in the later. The HFR behavior is explained by an equivalent circuit model including leading wire inductance, liquid inductance, and static capacitance of QCM. Taking into account the HFR model, the positive frequency shifts of the QCM at high overtones during the cell adhesion process is understandable. Combining the TSM and HFR is an effective way to improve the stability of QCM and provides more reliable information from the responses of QCM. The HFR may have potential application in chemical and biological sensors.

Quartz Crystal Microbalance Electronic Interfacing Systems: A Review

Quartz Crystal Microbalance (QCM) sensors are actively being implemented in various fields due to their compatibility with different operating conditions in gaseous/liquid mediums for a wide range of measurements. This trend has been matched by the parallel advancement in tailored electronic interfacing systems for QCM sensors. That is, selecting the appropriate electronic circuit is vital for accurate sensor measurements. Many techniques were developed over time to cover the expanding measurement requirements (e.g., accommodating highly-damping environments). This paper presents a comprehensive review of the various existing QCM electronic interfacing systems. Namely, impedance-based analysis, oscillators (conventional and lock-in based techniques), exponential decay methods and the emerging phase-mass based characterization. The aforementioned methods are discussed in detail and qualitatively compared in terms of their performance for various applications. In addition, some theoretical improvements and recommendations are introduced for adequate systems implementation. Finally, specific design considerations of high-temperature microbalance systems (e.g., GaPO₄ crystals (GCM) and Langasite crystals (LCM)) are introduced, while assessing their overall system performance, stability and quality compared to conventional low-temperature applications.

A Noncontact Dibutyl Phthalate Sensor Based on a Wireless-Electrodeless QCM-D Modified with Nano-Structured Nickel Hydroxide

Dibutyl phthalate (DBP) is a widely used plasticizer which has been found to be a reproductive and developmental toxicant and ubiquitously existing in the air. A highly sensitive method for DBP monitoring in the environment is urgently needed. A DBP sensor based on a homemade wireless-electrodeless quartz crystal microbalance with dissipation (QCM-D) coated with nano-structured nickel hydroxide is presented. With the noncontact configuration, the sensing system could work at a higher resonance frequency (the 3rd overtone) and the response of the system was even more stable compared with a conventional quartz crystal microbalance (QCM). The sensor achieved a sensitivity of 7.3 Hz/ppb to DBP in a concentration range of 0.4–40 ppb and an ultra-low detection limit of 0.4 ppb of DBP has also been achieved.

Immunosensors for C-Reactive Protein Based on Ultrathin Films of Carboxylated Cellulose Nanofibrils

C-reactive protein (CRP) is an acute phase protein that has been widely used as a predictor of cardiovascular diseases. We report herein the synthesis of immunosensors based on carboxylated cellulose nanofibrils (CNF) for CRP detection, as demonstrated by quartz crystal microgravimetry (QCM). QCM sensors carrying ultrathin films of carboxylated CNF were prepared by using two protocols: (i) spin coating of CNF on the sensors followed by carboxylation via in situ oxidation with 2,2,6,6-tetramethylpiperidine 1-oxyl and (ii) carboxymethylation of CNF in aqueous dispersion followed by spin coating deposition on the sensors. Protein A was conjugated to the carboxylated CNF via N-(3-(Dimethylamino)propyl)-N'-ethylcarbodiimide hydrochloride/N-hydroxysuccinimide and used as a ligand for oriented immobilization of anti C-reactive protein (anti-CRP). The different carboxyl group density of the two oxidized CNF surfaces influenced Protein A binding and, subsequently, the available immobilized anti-CRP molecules. The detection efficiency for CRP, specificity, and concentration range displayed by the carboxylated CNF-based immunosensors coupled with oriented and unoriented anti-CRP were determined and compared.

Comparison of the different responses of surface plasmon resonance and quartz crystal microbalance techniques at solid–liquid interfaces under various experimental conditions

The different characteristics of surface plasmon resonance and quartz crystal microbalance techniques under different experimental scenarios are discussed.

A gas-phase amplified quartz crystal microbalance immunosensor based on catalase modified immunoparticles

A novel signal amplification strategy based on catalytic gas generation was developed to construct an ultrasensitive QCM immunosensor.

Ultra-sensitive in situ detection of silver ions using a quartz crystal microbalance

Label-free, ultra-sensitive and in situ detection of silver ion was achieved using a quartz crystal microbalance in laboratory conditions and drinking water.

Wireless-electrodeless quartz-crystal-microbalance biosensors for studying interactions among biomolecules: a review

The mass sensitivity of quartz-crystal microbalance (QCM) was drastically improved by removing electrodes and wires attached on the quartz surfaces. Instead of wire connections, intended vibrations of quartz oscillators were excited and detected by antennas through electromagnetic waves. This noncontacting measurement is the key for ultrahigh-sensitive detection of proteins in liquids as well as quantitative measurements. This review shows the principle of wireless QCMs, their applications to studying interactions among biomolecules and aggregation reactions of amyloid β peptides, and the next-generation MEMS QCM, the resonance acoustic microbalance with naked embedded quartz (RAMNE-Q).

High-sensitivity detection of silver ions using oligonucleotide-immobilized oscillator

With the remarkable developments in the fields of nanoscale research and industry, nanotoxicity is gaining importance from the viewpoint of its potential impact on human health and the environment. Herein, we report on the label-free, high-sensitivity detection of Ag(+), a representative nanotoxic material, by using a silver-specific nucleotide-coated oscillator. The detection is based on the measurement of the resonant frequency shift arising from constitution of the cytosine-Ag(+)-cytosine bonding. We amplify the resonant frequency shift by using single cytosine molecules. It is shown that a silver-specific DNA-immobilized oscillator enables the capture of silver ions at concentrations below 1 nM. Remarkably, the nucleotide-based oscillator enables an insight into the coordination chemistry, which plays an important role in the early detection of toxicity. This implies that the bio-conjugated sensor could be used to set the reference point for water quality.