Optical detection of choline and acetylcholine based on H2O2-sensitive quantum dots

Effect of Phosphorus Modulation in Iron Single-Atom Catalysts for Peroxidase Mimicking

Fe-N-C single-atom catalysts (SACs) exhibit excellent peroxidase (POD)-like catalytic activity, owing to their well-defined isolated iron active sites on the carbon substrate, which effectively mimic the structure of natural peroxidase's active center. To further meet the requirements of diverse biosensing applications, SAC POD-like activity still needs to be continuously enhanced. Herein, a phosphorus (P) heteroatom is introduced to boost the POD-like activity of Fe-N-C SACs. A 1D carbon nanowire (FeNCP/NW) catalyst with enriched Fe-N4 active sites is designed and synthesized, and P atoms are doped in the carbon matrix to affect the Fe center through long-range interaction. The experimental results show that the P-doping process can boost the POD-like activity more than the non-P-doped one, with excellent selectivity and stability. The mechanism analysis results show that the introduction of P into SAC can greatly enhance POD-like activity initially, but its effect becomes insignificant with increasing amount of P. As a proof of concept, FeNCP/NW is employed in an enzyme cascade platform for highly sensitive colorimetric detection of the neurotransmitter acetylcholine.

A new fluorescent hemicryptophane for acetylcholine recognition with an unusual recognition mode

The ammonium of the target interacts with the south part of the hemicryptophane probably because the cyclotriveratrylene's electronic density is altered by the extension of conjugation.

Metabolic Syndrome-An Emerging Constellation of Risk Factors: Electrochemical Detection Strategies

Metabolic syndrome is a condition that results from dysfunction of different metabolic pathways leading to increased risk of disorders such as hyperglycemia, atherosclerosis, cardiovascular diseases, cancer, neurodegenerative disorders etc. As this condition cannot be diagnosed based on a single marker, multiple markers need to be detected and quantified to assess the risk facing an individual of metabolic syndrome. In this context, chemical- and bio-sensors capable of detecting multiple analytes may provide an appropriate diagnostic strategy. Research in this field has resulted in the evolution of sensors from the first generation to a fourth generation of 'smart' sensors. A shift in the sensing paradigm involving the sensing element and transduction strategy has also resulted in remarkable advancements in biomedical diagnostics particularly in terms of higher sensitivity and selectivity towards analyte molecule and rapid response time. This review encapsulates the significant advancements reported so far in the field of sensors developed for biomarkers of metabolic syndrome.

Detection of toxic choline based on Mn2O3/NiO nanomaterials by an electrochemical method

In this study, a novel in situ choline sensor was assembled by attaching the binary Mn₂O₃/NiO nanoparticles (NPs) onto a glassy carbon electrode (GCE). Initially, Mn₂O₃/NiO NPs were synthesized via a wet-chemical process and fully characterized via XRD, XPS, FESEM, EDS, FTIR and UV-Vis methods. The analytical performances of the choline sensor were evaluated by an electrochemical method in the phosphate buffer phase. The estimated linear dynamic range (LDR) was found to be 0.1 nM to 0.1 mM. The other analytical performances of the choline sensor, such as sensitivity (16.4557 μA μM⁻¹ cm⁻²) and detection limit (5.77 ± 0.29 pM), were also calculated very carefully from the calibration plot. Overall, the choline sensor exhibited a reliable reproducibility, in situ validity, selectivity, interference effect, stability, and intra-day and inter-day performances with high accuracy in a short response time. Moreover, the probe was successfully applied to detect choline in real human, mouse and rabbit serum. This fabrication route would be a novel approach for the detection of selective biochemical sensor in the healthcare and biomedical fields.

In this study, a novel in situ choline sensor was assembled by attached the binary Mn₂O₃/NiO nanoparticles onto glassy carbon electrode, which might be a reliable way to develop of future sensor in the field of biomedical and healthcare fields.

Choline sensing based on in situ polymerization of aniline on the surface of upconverting nanoparticles

We found that the upconversion luminescence of UCNPs could be efficiently quenched by PANI, and a novel choline detection strategy has been developed based on in situ polymerization of aniline on the surface of UCNPs.

Fast and sensitive detection of foodborne pathogen using electrochemical impedance analysis, urease catalysis and microfluidics

Early screening of pathogenic bacteria is a key to prevent and control of foodborne diseases. In this study, we developed a fast and sensitive bacteria detection method integrating electrochemical impedance analysis, urease catalysis with microfluidics and using Listeria as model. The Listeria cells, the anti-Listeria monoclonal antibodies modified magnetic nanoparticles (MNPs), and the anti-Listeria polyclonal antibodies and urease modified gold nanoparticles (AuNPs) were incubated in a fluidic separation chip with active mixing to form the MNP-Listeria-AuNP-urease sandwich complexes. The complexes were captured in the separation chip by applying a high gradient magnetic field, and the urea was injected to resuspend the complexes and hydrolyzed under the catalysis of the urease on the complexes into ammonium ions and carbonate ions, which were transported into a microfluidic detection chip with an interdigitated microelectrode for impedance measurement to determine the amount of the Listeria cells. The capture efficiency of the Listeria cells in the separation chip was ∼93% with a shorter time of 30min due to the faster immuno-reaction using the active magnetic mixing. The changes on both impedance magnitude and phase angle were demonstrated to be able to detect the Listeria cells as low as 1.6×10(2)CFU/mL. The detection time was reduced from original ∼2h to current ∼1h. The recoveries of the spiked lettuce samples ranged from 82.1% to 89.6%, indicating the applicability of this proposed biosensor. This microfluidic impedance biosensor has shown the potential for online, automatic and sensitive bacteria separation and detection.

Ultrasensitive fluorescence immunoassay for detection of ochratoxin A using catalase-mediated fluorescence quenching of CdTe QDs

Herein, for the first time we report an improved competitive fluorescent enzyme linked immunosorbent assay (ELISA) for the ultrasensitive detection of ochratoxin A (OTA) by using hydrogen peroxide (H2O2)-induced fluorescence quenching of mercaptopropionic acid-modified CdTe quantum dots (QDs). In this immunoassay, catalase (CAT) was labeled with OTA as a competitive antigen to connect the fluorescence signals of the QDs with the concentration of the target. Through the combinatorial use of H2O2-induced fluorescence quenching of CdTe QDs as a fluorescence signal output and the ultrahigh catalytic activity of CAT to H2O2, our proposed method could be used to perform a dynamic linear detection of OTA ranging from 0.05 pg mL(-1) to 10 pg mL(-1). The half maximal inhibitory concentration was 0.53 pg mL(-1) and the limit of detection was 0.05 pg mL(-1). These values were approximately 283- and 300-folds lower than those of horseradish peroxidase (HRP)-based conventional ELISA, respectively. The reported method is accurate, highly reproducible, and specific against other mycotoxins in agricultural products as well. In summary, the developed fluorescence immunoassay based on H2O2-induced fluorescence quenching of CdTe QDs can be used for the rapid and highly sensitive detection of mycotoxins or haptens in food safety monitoring.

Fluorescence Ratiometric Assay Strategy for Chemical Transmitter of Living Cells Using H2O2-Sensitive Conjugated Polymers

A new water-soluble conjugated poly(fluorene-co-phenylene) derivative (PFP-FB) modified with boronate-protected fluorescein (peroxyfluor-1) via PEG linker has been designed and synthesized. In the presence of H2O2, the peroxyfluor-1 group can transform into green fluorescent fluorescein by deprotecting the boronate protecting groups. In this case, upon selective excitation of PFP-FB backbone at 380 nm, efficient fluorescence resonance energy transfer (FRET) from PFP-FB backbone to fluorescein occurs, and accordingly, the fluorescence color of PFP-FB changes from blue to green. Furthermore, the emission color of PFP-FB and the FRET ratio change in a concentration-dependent manner. By taking advantage of PFP-FB, ratiometric detection of choline and acetylcholine (ACh) through cascade enzymatic reactions and further dynamic monitoring of the choline consumption process of cancer cells have been successfully realized. Thus, this new polymer probe promotes the development of enzymatic biosensors and provides a simpler and more effective way for detecting the chemical transmitter of living cells.

Fast synthesis of fluorescent SiO2@CdTe nanoparticles with reusability in detection of H2O2

In this study, highly fluorescent core/shell SiO₂@CdTe nanoparticles (NPs) were synthesized conveniently and efficiently via a hydrothermal method. The as-prepared SiO₂@CdTe NPs were uniform with good fluorescence preservation. The SiO₂@CdTe NPs could be used for the rapid detection of H₂O₂ with good sensitivity within several minutes. Excellent linear relationships existed between the quenching degrees of the SiO₂@CdTe NPs and the concentration of H₂O₂ in the range of 0.005 mM to 0.1 mM. The limit of detection (LOD) for H₂O₂ was 10 nM. Furthermore, it was proved that SiO₂@CdTe NPs could be used repeatedly for H₂O₂ detection due to their easy separation, which is an important feature. The excellent performance of SiO₂@CdTe NPs should facilitate their applications in chemistry or biology for detection of H₂O₂.

Sensitive fluorimetric assays for α-glucosidase activity and inhibitor screening based on β-cyclodextrin-coated quantum dots

A fluorescence method was established for a α-glucosidase activity assay and inhibitor screening based on β-cyclodextrin-coated quantum dots. p-Nitrophenol, the hydrolysis product of the α-glucosidase reaction, could quench the fluorescence of β-cyclodextrin-coated quantum dots via an electron transfer process, leading to fluorescence turn-off, whereas the fluorescence of the system turned on in the presence of α-glucosidase inhibitors. Taking advantage of the excellent properties of quantum dots, this method provided a very simple, rapid and sensitive screening method for α-glucosidase inhibitors. Two α-glucosidase inhibitors, 2,4,6-tribromophenol and acarbose, were used to evaluate the feasibility of this screening model, and IC50 values of 24 μM and 0.55 mM were obtained respectively, which were lower than those previously reported. The method may have potential application in screening α-glucosidase inhibitors.

Electrospinning graphene quantum dots into a nanofibrous membrane for dual-purpose fluorescent and electrochemical biosensors

Graphene quantum dots (GQDs) have become increasingly important for applications in energy materials, optical devices and biosensors. Here we report a facile technique to fabricate a nanofibrous membrane of GQDs by electrospinning water-soluble GQDs with polyvinyl alcohol (PVA) directly. The structure and fluorescence properties of the fabricated PVA/GQD nanofibrous membrane were investigated using scanning and transmission electron microscopy, and fluorescence microscopy. It was found that the electrospun PVA/GQD nanofibrous membrane has a three-dimensional structure with a high surface area to volume ratio, which is beneficial for the adsorption of electrolytes and the diffusion of reactants. For the first time, the created PVA/GQD nanofibrous membrane was utilized to fabricate dual-purpose fluorescent and electrochemical biosensors for highly sensitive determination of hydrogen peroxide (H₂O₂) and glucose. The experimental results indicated that the fluorescence intensity of the nanofibrous membrane decreased linearly with increasing H₂O₂ concentration, because the addition of H₂O₂ leads to fluorescence quenching of the GQDs, which endows the fabricated nanofibrous membrane with fluorescence activity. Besides, after binding glucose oxidase onto the created nanofibrous membrane, the fabricated nanofibrous membrane showed high sensitivity and selectivity for glucose detection. In addition, the PVA/GQD nanofibrous membrane can also be directly electrospun onto an electrode for electrochemical detection of H₂O₂. This novel nanofibrous membrane exhibits excellent catalytic performance and fluorescence activity, and therefore has potential applications for the highly stable, sensitive, and selective detection of H₂O₂ and glucose.

A homogeneous assay principle for universal substrate quantification via hydrogen peroxide producing enzymes

H2O2 is a widely occurring molecule which is also a byproduct of a number of enzymatic reactions. It can therefore be used to quantify the corresponding enzymatic substrates. In this study, the time-resolved fluorescence emission of a previously described complex consisting of phthalic acid and terbium (III) ions (PATb) is used for H2O2 detection. In detail, glucose oxidase and choline oxidase convert glucose and choline, respectively, to generate H2O2 which acts as a quencher for the PATb complex. The response time of the PATb complex toward H2O2 is immediate and the assay time only depends on the conversion rate of the enzymes involved. The PATb assay quantifies glucose in a linear range of 0.02-10 mmol L(-1), and choline from 1.56 to 100 μmol L(-1) with a detection limit of 20 μmol L(-1) for glucose and 1.56 μmol L(-1) for choline. Both biomolecules glucose and choline could be detected without pretreatment with good precision and reproducibility in human serum samples and infant formula, respectively. Furthermore, it is shown that the detected glucose concentrations by the PATb system agree with the results of a commercially available assay. In principle, the PATb system is a universal and versatile tool for the quantification of any substrate and enzyme reaction where H2O2 is involved.

A sensitive biosensor for the fluorescence detection of the acetylcholinesterase reaction system based on carbon dots

The carbon dots (C-dots) with high fluorescence quantum yield were prepared using hydrothermal method. C-dots have been adopted as probes for the fluorescence turn-off detection of H2O2 based on the special sensibility for the hydroxyl radical. And then the biosensors for the detection of substrate and enzymes activities were established in the acetylcholinesterase reaction system, which were related to the production of H2O2. Specifically, the proposed fluorescent biosensor was successfully applied to detect the concentration of choline (in the range from 0.025 to 50 μM) and acetylcholine (in the range from 0.050 to 50 μM), and the activity of choline oxidase (in the range from 1 to 75 U/L) and acetylcholinesterase (1 to 80 U/L). These results showed a sensitive, universal, nontoxic and eco-friendly detecting technique has been developed.

Chemical sensing of neurotransmitters

This review focuses on the chemosensors for neurotransmitters published for the last 12 years, covering biogenic amines (dopamine, epinephrine, norepinephrine, serotonin, histamine and acetylcholine), amino acids (glutamate, aspartate, GABA, glycine and tyrosine), and adenosine.

Sensitive and selective detection of Hg2+ and Cu2+ ions by fluorescent Ag nanoclusters synthesized via a hydrothermal method

An easily prepared fluorescent Ag nanoclusters (Ag NCs) probe for the sensitive and selective detection of Hg(2+) and Cu(2+) ions was developed here. The Ag NCs were synthesized by using polymethacrylic acid sodium salt as a template via a convenient hydrothermal process. The as-prepared fluorescent Ag NCs were monodispersed, uniform and less than 2 nm in diameter, and can be quenched in the presence of mercury (Hg(2+)) or copper (Cu(2+)) ions. Excellent linear relationships existed between the quenching degree of the Ag NCs and the concentrations of Hg(2+) or Cu(2+) ions in the range of 10 nM to 20 μM or 10 nM to 30 μM, respectively. By using ethylenediaminetetraacetate (EDTA) as the masking agent of Cu(2+), Hg(2+) was exclusively detected in coexistence with Cu(2+) with high sensitivity (LOD = 10 nM), which also provided a reusable detection method for Cu(2+). Furthermore, the different quenching phenomena caused by the two metals ions such as changes in visible colour, shifts of UV absorbance peaks and changes in size of Ag NCs make it easy to distinguish between them. Therefore the easily synthesized fluorescent Ag NCs may have great potential as Hg(2+) and Cu(2+) ions sensors.

Quantum dots as nano plug-in's for efficient NADH resonance energy routing

The routing of fluorescent signals from NADH to quantum dots (QDs) has been a subject of extensive research for FRET based applications. In the present study, the spectral cross talk of NAD(+)/NADH with QDs was used to monitor the reaction of NAD(+)-dependent dehydrogenase enzyme. CdTe QD may undergo dipolar interaction with NADH as a result of broad spectral absorption due to multiple excitonic states resulting from quantum confinement effects. Thus, non-radiative energy transfer can take place from NADH to CdTe QD enhancing QDs fluorescence. Energy routing assay of NADH-QD was applied for detection of formaldehyde as a model analyte in the range 1000-0.01 ng/mL by the proposed technique. We observed proportionate quenching of CdTe QD fluorescence by NAD(+) and enhancement in the presence of NADH formed by various concentrations of enzyme (0.028-0.4 U). Hence, it was possible to detect formaldehyde in the range 1000-0.01 ng/mL with a limit of detection (LOD) at 0.01 ng/mL and regression coefficient R(2)=0.9982. Therefore, a unique optical sensor was developed for the detection of the formaldehyde in sensitive level based on the above mechanism. This method can be used to follow the activity of NAD(+)-dependent enzymes and detection of dehydrogenases in general.