Electrochemical sensor for dopamine based on a novel graphene-molecular imprinted polymers composite recognition element

Development of metal free carbon catalyst derived from Parthenium hysterophorus for the electrochemical detection of dopamine

Parthenium hysterophorus, one of the seven most hazardous weeds is widely known for its allergic, respiratory and skin-related disorders. It is also known to affect biodiversity and ecology. For eradication of the weed, its effective utilization for the successful synthesis of carbon-based nanomaterial is a potent management strategy. In this study, reduced graphene oxide (rGO) was synthesized from weed leaf extract through a hydrothermal-assisted carbonization method. The crystallinity and geometry of the as-synthesized nanostructure are confirmed from the X-ray diffraction study, while the chemical architecture of the nanomaterial is ascertained through X-ray photoelectron spectroscopy. The stacking of flat graphene-like layers with a size range of ∼200-300 nm is visualized through high-resolution transmission electron microscopy images. Further, the as-synthesized carbon nanomaterial is advanced as an effective and highly sensitive electrochemical biosensor for dopamine, a vital neurotransmitter of the human brain. Nanomaterial oxidizes dopamine at a much lower potential (0.13 V) than other metal-based nanocomposites. Moreover, the obtained sensitivity (13.75 and 3.31 μA μM-1 cm-2), detection limit (0.6 and 0.8 μM), the limit of quantification (2.2 and 2.7 μM) and reproducibility calculated through cyclic voltammetry/differential pulse voltammetry respectively outcompete many metal-based nanocomposites that were previously used for the sensing of dopamine. This study boosts the research on the metal-free carbon-based nanomaterial derived from waste plant biomass.

A novel core-shell composite of PCN-222@MIPIL for ultrasensitive electrochemical sensing 4-nonylphenol

A novel core-shell composite of PCN-222 and molecularly imprinted poly (ionic liquid) (PCN-222@MIPIL) with high conductivity and selectivity was prepared for electrochemical sensing 4-nonylphenol (4-NP). The electrical conductivities of some MOFs including PCN-222, ZIF-8, NH2-UIO-66, ZIF-67, and HKUST-1 were explored. The results indicated that PCN-222 had the highest conductivity and was then used as a novel imprinted support. PCN-222@MIPIL with core-shell and porous structure was synthesized using PCN-222 as support and 4-NP as template. The average pore volume of PCN-222@MIPIL was 0.085 m3 g-1. In addition, the average pore width of PCN-222@MIPIL was from 1.1 to 2.7 nm. The electrochemical response for PCN-222@MIPIL sensor for 4-NP was 2.54, 2.14, and 4.24 times that of non-molecularly imprinted poly (ionic liquid) (PCN-222@NIPIL), PCN-222, and MIPIL sensors, respectively, which result from superior conductivity and imprinted recognition sites of PCN-222@MIPIL. The current response of PCN-222@MIPIL sensor to 4-NP concentration from 1 × 10-4 to 10 μM presented an excellent linear relationship. The detection limit of 4-NP was 0.03 nM. The synergistic effect between the PCN-222 supporter with high conductivity, specific surface area and shell layer of surface MIPIL results in the outstanding performance of PCN-222@MIPIL. PCN-222@MIPIL sensor was adopted for detecting 4-NP in real samples and presented to be a reliable approach for determining 4-NP.

Functionally Collaborative Nanostructure for Direct Monitoring of Neurotransmitter Exocytosis in Living Cells

Neurotransmitter exocytosis of living cells plays a vital role in neuroscience. However, the available amperometric technique with carbon fiber electrodes typically measures exocytotic events from one cell during one procedure, which requires professional operations and takes time to produce statistical results of multiple cells. Here, we develop a functionally collaborative nanostructure to directly measure the neurotransmitter dopamine (DA) exocytosis from living rat pheochromocytoma (PC12) cells. The functionally collaborative nanostructure is constructed of metal-organic framework (MOF)-on-nanowires-on-graphene oxide, which is highly sensitive to DA molecules and enables direct detection of neurotransmitter exocytosis. Using the microsensor, the exocytosis from PC12 cells pretreated with the desired drugs (e.g., anticoronavirus drug, antiflu drug, or anti-inflammatory drug) has been successfully measured. Our achievements demonstrate the feasibility of the functionally collaborative nanostructure in the real-time detection of exocytosis and the potential applicability in the highly efficient assessment of the modulation effects of medications on exocytosis.

A fluorescence probe based on carbon dots for determination of dopamine utilizing its self-polymerization

A rapid and sensitive strategy for sensing dopamine (DA) was proposed based on the fluorescence quenching effects of polydopamine (PDA) on carbon dots (CDs). The green-emission fluorescence CDs were synthesized via a facile one-pot hydrothermal approach by employing p-phenylenediamine and ethanol as reagents. In alkaline environments, DA would polymerize to form PDA on surface of CDs, resulting in the fluorescence quenching of the detection system owing to the effects of fluorescence resonance energy transfer (FERT) and inner filter effect (IFE). The proposed fluorescence probe exhibits good selectivity and sensitivity to DA in the concentration range of 0.1-15 μM, with a limit of detection (LOD) of 37 nM. Results of detecting DA in serum samples indicate the broad potential of the proposed strategy for future application in diagnosis of DA-related diseases.

Fabrication of an imprinted polymer based graphene oxide composite for label-free electrochemical sensing of Sus DNA

An innovative label-free electrochemical sensor was developed for selective detection of Sus (pig) Deoxyribonucleic acid (DNA) through adenine imprinted polypyrrole fabricated on the surface of allyl mercaptan modified GO (MIP/mGO).

Achievements of Graphene and Its Derivatives Materials on Electrochemical Drug Assays and Drug-DNA Interactions

Graphene, emerging as a true two-dimensional (2D) material, has attracted increasing attention due to its unique physical and electrochemical properties such as high surface area, excellent conductivity, high mechanical strength, and ease of functionalization and mass production. The entire scientific community recognizes the significance and potential impact of graphene. Electrochemical detection strategies have advantages such as being simple, fast, and low-cost. The use of graphene as an excellent interface for electrode modification provides a promising way to construct more sensitive and stable electrochemical (bio)sensors. The review presents sensors based on graphene and its derivatives for electrochemical drug assays from pharmaceutical dosage forms and biological samples. Future perspectives in this rapidly developing field are also discussed. In addition, the interaction of several important anticancer drug molecules with deoxyribonucleic acid (DNA) that was immobilized onto graphene-modified electrodes has been detailed in terms of dosage regulation and utility purposes.

Synthesis of POMOFs with 8-fold helix and its composite with carboxyl functionalized SWCNTs for the voltammetric determination of dopamine

Although many satisfactory studies have been developed for biomolecule detection, the complexity of biofluids still poses a major challenge to improve the performance of nanomaterials as electrochemical sensors. Herein, unprecedented polyoxometalate-based metal-organic frameworks (POMOFs) with 8-fold meso-helical feature, [Ag₅(trz)₄]₂[PMo₁₂O₄₀] (PAZ), were synthesized and explored as electrochemical sensors to detect dopamine (DA). To improve the conductivity of PAZ and the binding ability with single-walled carbon nanotubes (SWCNTs), the nanocomposite of carboxyl functionalized SWCNTs (SWCNTs-COOH) with nano-PAZ (NPAZ), NPAZ@SWCNTs-COOH, was fabricated, and transmission electron microscopy (TEM) shows that NPAZ can interact stably and uniformly with SWCNTs-COOH, owing to more defect sites on the surface of SWCNTs-COOH. The electrochemical result of NPAZ@SWCNTs-COOH/GCE towards detecting DA shows that the linear range was from 0.05 to 100 μM with a detection limit (LOD) of 8.6 nM (S/N = 3). A new electrochemical biosensing platform by combining 8-fold helical POMOFs with SWCNTs-COOH was developed for enhancing detection of dopamine for the first time, exhibiting the lowest detection limit to date.

Development of Two-Dimensional Nanomaterials Based Electrochemical Biosensors on Enhancing the Analysis of Food Toxicants

In recent times, food safety has become a topic of debate as the foodborne diseases triggered by chemical and biological contaminants affect human health and the food industry's profits. Though conventional analytical instrumentation-based food sensors are available, the consumers did not appreciate them because of the drawbacks of complexity, greater number of analysis steps, expensive enzymes, and lack of portability. Hence, designing easy-to-use tests for the rapid analysis of food contaminants has become essential in the food industry. Under this context, electrochemical biosensors have received attention among researchers as they bear the advantages of operational simplicity, portability, stability, easy miniaturization, and low cost. Two-dimensional (2D) nanomaterials have a larger surface area to volume compared to other dimensional nanomaterials. Hence, researchers nowadays are inclined to develop 2D nanomaterials-based electrochemical biosensors to significantly improve the sensor's sensitivity, selectivity, and reproducibility while measuring the food toxicants. In the present review, we compile the contribution of 2D nanomaterials in electrochemical biosensors to test the food toxicants and discuss the future directions in the field. Further, we describe the types of food toxicity, methodologies quantifying food analytes, how the electrochemical food sensor works, and the general biomedical properties of 2D nanomaterials.

Carbon dots-based dual-emission ratiometric fluorescence sensor for dopamine detection

The detection of Dopamine (DA) is significant for disease surveillance and prevention. However, the development of the precise and simple detection techniques is still at a preliminary stage due to their high tester requirements, time-consuming process, and low accuracy. In this work, we present a novel dual-emission ratiometric fluorescence sensing system based on a hybrid of carbon dots (CDs) and 7-amino-4-methylcoumarin (AMC) to quickly monitor the DA concentration. Linked via amide bonds, the CDs and AMC offered dual-emissions with peaks located at 455 and 505 nm, respectively, under a single excitation wavelength of 300 nm. Attributed to the fluorescence of the CDs and AMC in the nanohybrid system can be quenched by DA, the concentration of DA could be quantitatively detected by monitoring the ratiometric ratio change in fluorescent intensity. More importantly, the CDs-AMC-based dual-emission ratiometric fluorescence sensing system demonstrated a remarkable linear relationship in the range of 0-33.6 μM to detection of DA, and a low detection limit of 5.67 nM. Additionally, this sensor successfully applied to the detection of DA in real samples. Therefore, the ratiometric fluorescence sensing system may become promising to find potential applications in biomedical dopamine detection.

Electroless deposition of gold nanoparticles on carbon nanopipette electrode for electrochemical detection of catecholamines released from PC12 cells

An electroless deposition method is reported for the fabrication of gold nanoparticles (Au NPs) modified carbon nanopipette electrode (CNPE) for sensitive electrochemical detection of dopamine (DA) in aqueous solution and catecholamines released from PC12 cells. A CNPE is fabricated by chemical vapor deposition with a carbon layer onto nanocapillary and then contacted with copper (Cu) wire. Cu wire of CNPE is able to serve as reducing agent for electroless deposition of Au NPs on the CNPE because the potential of Cu²⁺/Cu is more negative than that of AuCl₄^-/Au. The method is simple, time-saving, and environmentally friendly. Field emission scanning electron microscopy, energy-dispersive X-ray analysis, and electrochemical techniques confirm the successful fabrication of the Au NPs/CNPE. Furthermore, Au NPs/CNPE exhibits a good sensing activity for DA oxidation with a wide linear determination range of 0.1-8 μmol/L and a low detection limit of 6 nmol/L. The Au NPs/CNPE can be potentially applied for measurement of catecholamines released from PC12 cells. This present work is believed to be beneficial to the design and development of active metal catalysts onto nanoelectrodes for the detection of electroactive biological molecules in living cells.Graphical abstract An electroless deposition method was developed for the fabrication of gold nanoparticles onto the carbon nanopipette electrode, which was served as an enhanced electrochemical sensing platform for highly sensitive detection of dopamine with a linear range of 0.1-8 μmol/L and a detection limit of 6 nmol/L, and was also applied in the detection of catecholamines released from PC12 cells.

Dopamine Sensing Based on Ultrathin Fluorescent Metal-Organic Nanosheets

The importance of dopamine (DA) detection as a biomarker for several diseases, especially Parkinson''s disease, has persuaded scientists to develop new nanomaterials for efficient sensing of DA in clinical samples. Ultrathin metal-organic nanosheets due to their exceptional thickness, large surface area, and flexibility are endowed with many accessible active sites and optimal surface interaction with the target analyte molecules. In this regard, a novel layered fluorescent metal-organic nanomaterial with a honeycomb topology based on europium, [Eu(pzdc)(Hpzdc)(H₂O)]_n (ECP) (H₂pzdc = 2,3-pyrazine dicarboxylic acid), was synthesized. X-ray crystallography revealed that the 3D supramolecular architecture of ECP is constructed from noncovalent interactions of coordinated water molecules between the 2D layers along the b axis. These layers that are only ∼4 nm thick were conveniently separated through ultrasound-induced liquid phase exfoliation. Optical studies show that the reduction of ECP thickness enhances the fluorescence intensity and serves as an efficient optical marker for DA detection. ECP nanoflakes exhibited fast response and high selectivity for DA detection in clinical samples. Good linearity for DA detection in the range of 0.1-10 μM with a detection limit of 21 nM proves the potential of ECP nanoflakes in DA sensing applications.

Molecularly imprinted polymer-based bioelectrical interfaces with intrinsic molecular charges

For enzyme-/antibody-free and label-free biosensing, a molecularly imprinted polymer (MIP)-based membrane with phenylboronic acid (PBA) molecules, which induces the change in the density of molecular charges based on the small biomolecule–PBA diol binding, has been demonstrated to be suitable for the bioelectrical interface of biologically coupled gate field-effect transistor (bio-FET) sensors. MIP-coated gate FET sensors selectively detect various small biomolecules such as glucose, dopamine, sialic acid, and oligosaccharides without using labeled materials. In particular, the well-controlled MIP film by surface-initiated atom transfer radical polymerization (SI-ATRP) contributes to the quantitative analysis of small biomolecule sensing, resulting in potentiometric Langmuir isotherm adsorption analysis by which the parameters such as the binding affinity between small biomolecules and MIP cavities are evaluated. Also, the output electrical signal of even a random MIP-coated gate FET sensor is quantitatively analyzed using the bi-Langmuir adsorption isotherm equation, showing the adsorption mechanism of small biomolecules onto the template-specific MIP membrane. Thus, a platform based on the MIP bioelectrical interface for the bio-FET sensor is suitable for an enzyme-/antibody-free and label-free biosensing system in the fields of clinical diagnostics, drug discovery, the food industry, and environmental research.

A molecularly imprinted polymer (MIP)-based membrane with phenylboronic acid (PBA) molecules, which induces the change in the density of molecular charges, is suitable for the bioelectrical interface of field-effect transistor (FET) sensors.

Graphene Oxide Bulk-Modified Screen-Printed Electrodes Provide Beneficial Electroanalytical Sensing Capabilities

We demonstrate a facile methodology for the mass production of graphene oxide (GO) bulk-modified screen-printed electrodes (GO-SPEs) that are economical, highly reproducible and provide analytically useful outputs. Through fabricating GO-SPEs with varying percentage mass incorporations (2.5%, 5%, 7.5% and 10%) of GO, an electrocatalytic effect towards the chosen electroanalytical probes is observed, which increases with greater GO incorporated compared to bare/graphite SPEs. The optimum mass ratio of 10% GO to 90% carbon ink produces an electroanalytical signal towards dopamine (DA) and uric acid (UA) which is ca. ×10 greater in magnitude than that achievable at a bare/unmodified graphite SPE. Furthermore, 10% GO-SPEs exhibit a competitively low limit of detection (3σ) towards DA at ca. 81 nM, which is superior to that of a bare/unmodified graphite SPE at ca. 780 nM. The improved analytical response is attributed to the large number of oxygenated species inhabiting the edge and defect sites of the GO nanosheets, which are able to exhibit electrocatalytic responses towards inner-sphere electrochemical analytes. Our reported methodology is simple, scalable, and cost effective for the fabrication of GO-SPEs that display highly competitive LODs and are of significant interest for use in commercial and medicinal applications.

Recent Advances in Electrochemical and Optical Sensing of Dopamine

Nowadays, several neurological disorders and neurocrine tumours are associated with dopamine (DA) concentrations in various biological fluids. Highly accurate and ultrasensitive detection of DA levels in different biological samples in real-time can change and improve the quality of a patient's life in addition to reducing the treatment cost. Therefore, the design and development of diagnostic tool for in vivo and in vitro monitoring of DA is of considerable clinical and pharmacological importance. In recent decades, a large number of techniques have been established for DA detection, including chromatography coupled to mass spectrometry, spectroscopic approaches, and electrochemical (EC) methods. These methods are effective, but most of them still have some drawbacks such as consuming time, effort, and money. Added to that, sometimes they need complex procedures to obtain good sensitivity and suffer from low selectivity due to interference from other biological species such as uric acid (UA) and ascorbic acid (AA). Advanced materials can offer remarkable opportunities to overcome drawbacks in conventional DA sensors. This review aims to explain challenges related to DA detection using different techniques, and to summarize and highlight recent advancements in materials used and approaches applied for several sensor surface modification for the monitoring of DA. Also, it focuses on the analytical features of the EC and optical-based sensing techniques available.

Comparison between electrochemical and photoelectrochemical detection of dopamine based on titania-ceria-graphene quantum dots nanocomposite

In this study, titania-ceria-graphene quantum dot (TC-GQD) nanocomposite was synthesized by hydrothermal method for the first time. The prepared nanomaterials were characterized by XRD, FTIR dynamic light scattering (DLS), FESEM, HRTEM, and EDX spectroscopy along with elemental mapping. The synergistic effect of the nanocomposite components was studied by diffuse reflectance spectroscopy (DRS) and electrical conductivity meter. The results showed that band gap of TC-GQD nanocomposite was shifted to visible lights relative to its components (1.3 eV), and electrical conductivity of the sample was significant increased to 89.5 μS cm^-1. After chemical and physical characterization, prepared new nanocomposites were used to design a new electrochemical (EC) and photoelectrochemical (PEC) dopamine (DA) sensors. In both EC and PEC methods effecting experimental parameters were optimized. Due to the synergic effect of the nanocomposite components, an outstanding photocurrent response was observed for DA based on PEC sensor. A linear calibration curve with a lower detection limit of 22 nM DA, and sensitivity of 13.8 mA/mM_(DA), in a wider range of 0.3-750 μM DA, was obtained for TC-GQD/GCE electrode in PEC. While, the TC-GQD/GCE electrode detected DA in the range of 1-500 μM DA, with two linear calibration curve, detection limit of 0.22 μM DA, and sensitivity of 4.9 mA/mM_(DA), in the EC. Observed results from EC and PEC sensors are presented and compared.

Selective Enrichment of Clenbuterol onto Molecularly Imprinted Polymer Microspheres with Tailor-made Structure and Oxygen Functionalities

The noxious clenbuterol misapplied as the feed additive has posed an enormous threat to humans who actively rely on the food chains with high potential of contamination by clenbuterol, such as pork and beef. It is, therefore, highly desirable to develop novel materials and strategies for dealing with the clenbuterol. Herein, functional polymer microspheres prepared by Pickering emulsion polymerization were explored for the selective enrichment of the clenbuterol, and their structure and oxygen functionalities could be tailor-made by a molecular imprinting process. The clenbuterol imprinting was adequately demonstrated to not only increase the particle size (~52 nm vs. ~42 nm) and create cavities for the accommodation of the clenbuterol molecules, but also reduce the oxygen functionalities of the resulting molecularly imprinted polymer microspheres (MIPMs) by approximately 4 at.%, which is believed to correlate with the high specificity of the MIPMs. Various characterization methods were employed to evidence these findings, including scanning electron microscopy, BET measurements, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and elemental mapping examination. More importantly, the MIPMs showed a markedly superior enrichment capability towards clenbuterol to the counterpart, that is, non-molecularly imprinted polymer microspheres (NIPMs). Compared to the NIPMs without specificity for clenbuterol, the MIPMs exhibited an impressive selectivity to clenbuterol, with the relative selectivity coefficient (k') values largely exceeding 1, thus corroborating that the useful molecular imprinting led to the generation of the binding sites complementary to the clenbuterol molecule in the size and functionalities. The MIPMs were also employed as the stationary phase to fabricate molecularly imprinting solid-phase extraction column, and the spike recovery was demonstrated to be not significantly decreased even after nine cycles. Furthermore, the reliability of the method was also evidenced through the comparison of the MIPMs prepared from different batches.

Graphene Modified Molecular Imprinting Electrochemical Sensor for Determining the Content of Dopamine

Background:

The unnatural levels of dopamine (DA) result in serious neurological disorders such as Parkinson’s disease. Electrochemical methods which have the obvious advantages of simple operation and low-cost instrumentation were widely used for determination of DA. In order to improve the measurement performance of the electrochemical sensor, molecular imprinting technique and graphene have always been employed to increase the selectivity and sensitivity.

Methods:

An electrochemical sensor which has specific selectivity to (DA) was proposed based on the combination of a molecular imprinting polymer (MIP) with a graphene (GR) modified gold electrode. The performance and effect of MIP film were investigated by differential pulse voltammetry (DPV) and cyclic voltammetry (CV) in the solution of 5.0 ×10-3 mol/L K3[Fe(CN)6] and K4[Fe(CN)6] with 0.2 mol/L KCl at room temperature.

Results:

This fabricated sensor has well repeatability and stability, and was used to determine the dopamine of urine. Under the optimized experiment conditions, the current response of the imprinted sensor was linear to the concentration of dopamine in the range of 1.0×10-7 ~ 1.0×10-5 mol/L, the linear equation was I (µA) = 7.9824+2.7210lgc (mol/L) with the detection limit of 3.3×10-8 mol/L.

Conclusion:

In this work, a highly efficient sensor for determination of DA was prepared with good sensitivity by GR and great selectivity of high special recognization ability by molecular imprinting membrane. This proposed sensor was used to determine the dopamine in human urine successfully.

Preparation and applications of electrochemical chemosensors based on carbon-nanomaterial-modified molecularly imprinted polymers

The past few decades have witnessed a rapid development in electrochemical chemosensors (ECCSs). The integration of carbon nanomaterials (CNMs) and molecularly imprinted polymers (MIPs) has endowed ECCSs with high selectivity and sensitivity toward target detection. Due to the integrated merits of MIPs and CNMs, CNM-modified MIPs as ECCSs have been widely reported and have excellent detection applications. This review systematically summarized the general categories, preparation strategies, and applications of ECCSs based on CNM-modified MIPs. The categories include CNM-modified MIPs often hybridized with various materials and CNM-encapsulated or CNM-combined imprinting silica and polymers on working electrodes or other substrates. The preparation strategies include the polymerization of MIPs on CNM-modified substrates, co-polymerization of MIPs and CNMs on substrates, drop-casting of MIPs on CNM-modified substrates, self-assembly of CNMs/MIP complexes on substrates, and so forth. We discussed the in situ polymerization, electro-polymerization, and engineering structures of CNM-modified MIPs. With regard to potential applications, we elaborated the detection mechanisms, signal transducer modes, target types, and electrochemical sensing of targets in real samples. In addition, this review discussed the present status, challenges, and prospects of CNM-modified MIP-based ECCSs. This comprehensive review is desirable for scientists from broad research fields and can promote the further development of MIP-based functional materials, CNM-based hybrid materials, advanced composites, and hybrid materials.

Electroanalysis of Catecholamine Drugs using Graphene Modified Electrodes

Background:

Catecholamine drugs are a family of electroactive pharmaceutics, which are widely analyzed through electrochemical methods. However, for low level online determination and monitoring of these compounds, which is very important for clinical and biological studies, modified electrodes having high signal to noise ratios are needed. Numerous materials including nanomaterials have been widely used as electrode modifies for these families during the years. Among them, graphene and its family, due to their remarkable properties in electrochemistry, were extensively used in modification of electrochemical sensors.

Objective:

In this review, working electrodes which have been modified with graphene and its derivatives and applied for electroanalyses of some important catecholamine drugs are considered.

Molecularly Imprinted Materials for Selective Biological Recognition

Molecular imprinting is an approach of generating imprinting cavities in polymer structures that are compatible with the target molecules. The cavities have memory for shape and chemical recognition, similar to the recognition mechanism of antigen-antibody in organisms. Their structures are also called biomimetic receptors or synthetic receptors. Owing to the excellent selectivity and unique structural predictability of molecularly imprinted materials (MIMs), practical MIMs have become a rapidly evolving research area providing key factors for understanding separation, recognition, and regenerative properties toward biological small molecules to biomacromolecules, even cell and microorganism. In this review, the characteristics, morphologies, and applicability of currently popular carrier materials for molecular imprinting, especially the fundamental role of hydrogels, porous materials, hierarchical nanoparticles, and 2D materials in the separation and recognition of biological templates are discussed. Moreover, through a series of case studies, emphasis is given on introducing imprinting strategies for biological templates with different molecular scales. In particular, the differences and connections between small molecular imprinting (bulk imprinting, "dummy" template imprinting, etc.), large molecular imprinting (surface imprinting, interfacial imprinting, etc.), and cell imprinting strategies are demonstrated in detail. Finally, future research directions are provided.

A Cross-Linker-Based Poly(Ionic Liquid) for Sensitive Electrochemical Detection of 4-Nonylphenol

In this study, we report a cross-linker-based poly(ionic liquid) (PIL) for the sensitive detection of 4-nonylphenol (4-NP). PIL was poly(1,4-butanediyl-3,3′-bis-l-vinylimidazolium dibromide) (poly([V₂C₄(mim)₂]Br₂)). Poly([V₂C₄(mim)₂]Br₂) was prepared via one-step free-radical polymerization. The poly([V₂C₄(mim)₂]Br₂) was characterized by infrared spectroscopy, Raman spectroscopy, thermal gravimetric analyzer and scanning electron microscope. The poly([V₂C₄(mim)₂]Br₂) was then drop-cast onto a glassy carbon electrode (GCE) to obtain poly([V₂C₄(mim)₂]Br₂)/GCE. In comparison with a bare GCE, poly([V₂C₄(mim)₂]Br₂)/GCE exhibited higher peak current responses for [Fe(CN)₆]^3−/4−, lower charge transfer resistance, and larger effective surface area. While comparing the peak current responses, we found the peak current response for 4-NP using poly([V₂C₄(mim)₂]Br₂)/GCE to be 3.6 times higher than a traditional cross-linker ethylene glycol dimethacrylate (EGDMA) based poly(EGDMA) modified GCE. The peak current of poly([V₂C₄(mim)₂]Br₂) sensor was linear to 4-NP concentration from 0.05 to 5 μM. The detection limit of 4-NP was obtained as 0.01 μM (S/N = 3). The new PIL based electrochemical sensor also exhibited excellent selectivity, stability, and reusability. Furthermore, the poly([V₂C₄(mim)₂]Br₂)/GCE demonstrated good 4-NP detection in environmental water samples.

Novel molecularly imprinted polymer (MIP) multiple sensors for endogenous redox couples determination and their applications in lung cancer diagnosis

Multiplex electrochemical sensors for amperometric detection of glutathione disulfide (GSSG), glutathione (GSH), cysteine (Cys), cystine (Cyss), β-nicotinamide adenine dinucleotide phosphate (NADP⁺) and coenzyme II reduced tetrasodium salt (NADPH) were developed, in which analysis of Cyss, NADP⁺ and NADPH are the first report using this sensing system. Specificity of these sensors were ensured by a layer of molecularly imprinted polymer (MIP) which was electropolymerized in situ with the analytes as template. All the sensors were tested with standard buffers and mouse blood samples, showing satisfactory performance towards the corresponding analytes. Dynamic concentration for the six analytes was in the range of 10^-11-10^-8 mol/L with the detection limit down to 20 pmol/L. In addition, artificially synthesized MIP film on the electrodes allowed for good selectivity and stability. Real blood sample measurement proved that the sensors owned decent accuracy with recovery value ranging from 92%~112%. More importantly, blood samples from lung cancer patients and healthy donors were assayed by using the proposed sensors. Redox potentials (Ehc) were calculated based on the contents of these endogenic substances, which were utilized to reflect the health status of human body and help diagnose lung cancer. The levels of GSH, NADPH and the absolute value of Ehc_(GSH/GSSG) in patients with lung cancer are significantly lower (P < 0.01) than those in healthy people, while the contents of GSSG (P < 0.01) are higher. The blood test results suggested that the content of GSH, NADPH, NADP⁺ and Ehc_(GSH/GSSG) might serve as biomarkers for lung cancer prediagnosis. These novel sensors for liquid biospy of cancer have cost-benefit and scalability advantage over current techniques, potentially enabling broader clinical access and efficient population screening.

Sensing ultra-trace dopamine by restoration of fluorescence on locally acidified gold nanoparticles

An ultra-sensitive sensor was fabricated to measure dopamine through quenching and restoring FITC fluorescence by the competitive binding of dopamine andN-acetylneuraminic acid with mercaptophenylboronic acid anchored on the gold nanoparticles.

All-inorganic perovskite quantum dot/TiO2 inverse opal electrode platform: stable and efficient photoelectrochemical sensing of dopamine under visible irradiation

CsPbX3 (X = Cl, Br or I) perovskite quantum dots (PQDs) have attracted tremendous attention due to their extraordinarily excellent optical properties. However, there is still an obstacle for their bio-application, which is limited by their water-instability. In this work, we have designed a novel visible light triggered photoelectrochemical (PEC) sensor for dopamine (DA) based on CsPbBr1.5I1.5 PQD immobilized three-dimensional (3D) TiO2 inverse opal photonic crystals (IOPCs). Supported by the TiO2 IOPCs, the water-stability of the PQDs as well as that of the PEC sensor was considerably improved. Furthermore, employed as a photoactive material in PEC sensor, CsPbBr1.5I1.5 PQDs can expand the photocurrent response of the PEC sensor to the whole visible region. In addition, the modulation of the photonic stop band effect of TiO2 IOPCs on the incident light and the emission of PQDs could further enhance the photocurrent response. Such a PEC sensor demonstrates sensitive detection of DA in phosphate buffer saline solution and serum, with a good linear range from 0.1 μM to 250 μM and a low detection limit of approximately 0.012 μM. Our strategy opens an alternative horizon for PQD based PEC sensing, which could be more sensitive, convenient and inexpensive for clinical and biological analysis.