Silica nanoparticles based label-free aptamer hybridization for ATP detection using hoechst33258 as the signal reporter

Dual-signal, one-step simultaneous monitoring of genetic mutation in multiple gene regions using Fe3O4@Au and MOF

Genetic testing plays a crucial role in guiding individualized medication, however, detecting fine structural mutations in genes continues to present significant challenges. This study introduces a dual-signal fluorescence system, termed Fe3O4@Au@PEG@P1+MOF@P2, that integrates magnetic separation of Fe3O4@Au with NH2-MIL-88 (MOF) catalysis. Initially, the specimen (T1/T2) facilitated the formation of a specific complex (Fe3O4@Au@PEG@P1+T1/T2) with Fe3O4@Au@PEG@P1. The subsequent addition of Hoechst-33258 produced a robust fluorescence signal at 460 nm, enabling the identification of mutations in the first gene regions. Following this, MOF@P2 was introduced to activate the catalyst through P2 pairing with T2. The complex Fe3O4@Au@PEG@P1+T1/T2+P2+Hoechst-33258 was subsequently isolated using an external magnetic field. Upon adding OPD, fluorescent DAP was detected at 560 nm, allowing for the identification of mutations in the second gene regions. The research demonstrated that the variation in fluorescence signals increased with a higher number of base substitutions and deletion mutations, with deletion mutations resulting in a notably greater alteration rate compared to substitution mutations. Interestingly, triple base substitution mutations, characterized by lower clustering of non-continuous mutations, produced a more pronounced change in fluorescence signal than did a higher clustering of continuous mutations (codon mutations). This single-step methodology effectively differentiates among the number and types of mutations across multiple gene regions while assessing the degree of mutation clustering. Overall, this technology significantly enhances the current capabilities for detecting fine structural mutations in genes. Furthermore, the approach exhibits high sensitivity in detecting concentrations of T1 and T2 ranging from 10-15 M to 10-9 M, with detection limits of 0.19 fM and 0.24 fM, even in 5 % serum samples.

Nanopore Detection of Small Molecules Based on Replacement and Complexation Chemical Interactions

Small molecules play important roles in a variety of biological processes such as metabolism, cell signaling and enzyme regulation, and can serve as valuable biomarkers for human diseases. Moreover, they are essential to drug discovery and development, and are important targets for environmental monitoring and food safety. Due to the size incompatibility, small molecule transport is difficult to be monitored with a nanopore. A popular strategy for nanopore detection of small molecules is to introduce a molecular probe as a ligand (or recognition element) and rely on their effect on the ligand transport. One limitation for this sensing strategy is that the probe molecule needs to have a slightly smaller size than the nanopore constriction or can be easily unfolded or unzipped through the pore. Herein, by taking advantage of replacement and complexation chemical interactions, a generic approach is reported for detection of small molecules by using large biomolecules with well-defined stable 3D structures such as aptamers as recognition elements. Given the versatile use of aptamers as capture agents for a wide variety of species, the developed nanopore sensing strategy should find applications in many fields.

Biosensor for ATP detection via aptamer-modified PDA@POSS nanoparticles synthesized in a microfluidic reactor

This study introduces aptamer-functionalized polyhedral oligomeric silsesquioxane (POSS) nanoparticles for adenosine triphosphate (ATP) detection where the POSS nanoparticles were synthesized in a one-step, continuous flow microfluidic reactor utilizing thermal polymerization. A microemulsion containing POSS monomers was generated in the microfluidic reactor which was designed to prevent clogging by using a continuous oil flow around the emulsion during thermal polymerization. Surfaces of POSS nanoparticles were biomimetically modified by polydopamine. The aptamer sequence for ATP was successfully attached to POSS nanoparticles. The aptamer-modified POSS nanoparticles were tested for affinity-based biosensor applications using ATP as a model molecule. The nanoparticles were able to capture ATP molecules successfully with an affinity constant of 46.5 [Formula: see text]M. Based on this result, it was shown, for the first time, that microfluidic synthesis of POSS nanoparticles can be utilized in designing aptamer-functionalized nanosystems for biosensor applications. The integration of POSS in biosensing technologies not only exemplifies the versatility and efficacy of these nanoparticles but also marks a significant contribution to the field of biorecognition and sample preparation.

Advances in chilling injury of postharvest fruit and vegetable: Extracellular ATP aspects

Due to the global use of cold chain, the development of postharvest technology to reduce chilling injury (CI) in postharvest fruits and vegetables during storage and transport is needed urgently. Considerable evidence shows that maintaining intracellular adenosine triphosphate (iATP) in harvested fruits and vegetables is beneficial to inhibiting CI occurrence. Extracellular ATP (eATP) is a damage-associated signal molecule and plays an important role in CI of postharvest fruits and vegetables through its receptor and subsequent signal transduction under low-temperature stress. The development of new aptasensors for the simultaneous determination of eATP level allows for better understanding of the roles of eATP in a myriad of responses mediated by low-temperature stress in relation to the chilling tolerance of postharvest fruits and vegetables. The multiple biological functions of eATP and its receptors in postharvest fruits and vegetables were attributed to interactions with reactive oxygen species (ROS) and nitric oxide (NO) in coordination with phytohormones and other signaling molecules via downstream physiological activities. The complicated interconnection among eATP in relation to its receptors, eATP/iATP homeostasis, ROS, NO, and heat shock proteins triggered by eATP recognition has been emphasized. This paper reviews recent advances in the beneficial effects of energy handling, outlines the production and homeostasis of eATP, discusses the possible mechanism of eATP and its receptors in chilling tolerance, and provides future research directions for CI in postharvest fruits and vegetables during low-temperature storage.

Recent Developments in Aptasensors for Diagnostic Applications

Aptamers are exciting smart molecular probes for specific recognition of disease biomarkers. A number of strategies have been developed to convert target-aptamer binding into physically detectable signals. Since the aptamer sequence was first discovered, a large variety of aptamer-based biosensors have been developed, with considerable attention paid to their potential applications in clinical diagnostics. So far, a variety of techniques in combination with a wide range of functional nanomaterials have been used for the design of aptasensors to further improve the sensitivity and detection limit of target determination. In this paper, the advantages of aptamers over traditional antibodies as the molecular recognition components in biosensors for high-throughput screening target molecules are highlighted. Aptamer-target pairing configurations are predominantly single- or dual-site binding; the design of recognition modes of each aptamer-target pairing configuration is described. Furthermore, signal transduction strategies including optical, electrical, mechanical, and mass-sensitive modes are clearly explained together with examples. Finally, we summarize the recent progress in the development of aptamer-based biosensors for clinical diagnosis, including detection of cancer and disease biomarkers and in vivo molecular imaging. We then conclude with a discussion on the advanced development and challenges of aptasensors.

Design and Synthesis of Ag Nanocluster Molecular Beacon for Adenosine Triphosphate Detection

This study presents a fluorescence method for detecting adenosine triphosphate (ATP) based on a label-free Ag nanocluster molecular beacon (MB) with high sensitivity. The sensor contains a hairpin-shaped MB, two short single-stranded DNA strands, and T4 DNA ligase. The MB consists of three parts, which are the template DNA sequence for synthesizing Ag nanoclusters at the 5' end, the middle DNA with a hairpin-shaped structure, and the guanine base-rich DNA sequence at the 3' end. The sensor exhibits high fluorescence intensity in the absence of ATP. However, when the probe is used for ATP detection, the two short DNA sequences in the sensor would form a long sequence by enzymatic ligation reaction; this long sequence opens the hairpin-shaped structure of the MB and decreases the fluorescence of the system. Under optimal analytical conditions, a clear linear relationship is observed between ATP concentration and fluorescence intensity in the range of 0.1-10 μM. The interference presented by other small molecules during ATP detection is evaluated, and results confirm the good selectivity of the proposed sensor. Compared with traditional methods, the sensor is label free, easy to operate, inexpensive, and highly sensitive.

Monitoring of dynamic ATP level changes by oligomycin-modulated ATP synthase inhibition in SW480 cancer cells using fluorescent "On-Off" switching DNA aptamer

Adenosine triphosphate (ATP) is the main energy source in cells and an important biomolecule participating in cellular reactions in living organisms. Since the ATP level changes dynamically reflecting the development of a debilitating disease or carcinogenesis, we have focused in this work on monitoring of the oligomycin (OMC)-modulated ATP synthase inhibition using a fluorescent-switching DNA aptamer designed for the detection of ATP (Apt(ATP)), as the model for studies of dynamic ATP level variation. The behavior of the ATP aptamer has been characterized using fluorescence spectroscopy. The Intramolecular fluorescence resonance energy transfer (iFRET) operates in the proposed aptamer from the FAM dye moiety to guanines of the aptamer G-quadruplex when the target ATP is present and binds to the aptamer changing its conformation. The iFRET process enables the detection of ATP down to the limit of detection, LOD = 17 μM, without resorting to any extra chemi-amplification schemes. The selectivity coefficients for relevant interferent triphosphates (UTP, GTP, and CTP) are low for the same concentration as that of ATP. We have demonstrated an efficient transfection of intact cells and OMC-treated SW480 colon cancer cells with Apt(ATP), using microscopic imaging, iFRET measurements, and cell viability testing with MTT method. The applicability of the switching DNA aptamer for the analysis of real samples, obtained by lysis of SW480 cells, was also tested. The proposed Apt(ATP) may be considered as a viable candidate for utilization in measurements of dynamic ATP level modulation in cells in different stages of cancer development and testing of new drugs in pharmacological studies.

Comparison of turn-on and ratiometric fluorescent G-quadruplex aptasensor approaches for the detection of ATP

Two fluorescent aptasensor methods were developed for the detection of ATP in biochemical systems. The first method consisted of a label-free fluorescent "turn-on" approach using a guanine-rich ATP aptamer sequence and the DNA-binding agent berberine complex. In the presence of ATP, the ATP preferentially binds with its aptamer and conformationally changes into a G-quadruplex structure. The association of berberine with the G-quadruplex results in the enhancement of the fluorescence signal of the former. The detection limit of ATP was found to be 3.5 μM. Fluorescence, circular dichroism and melting temperature (T_m) experiments were carried out to confirm the binding specificity and structural changes. The second method employs the ratiometric fluorescent approach based on the Forster resonance energy transfer (FRET) for the detection of ATP using berberine along with a quencher (AuNRs, AgNPs) and a fluorophore (red quantum dots (RQDs), carbon dots (CDs)) labeled at 5' and 3' termini of the ATP-binding aptamer sequence. Upon addition of ATP and berberine, ATP specifically binds with its aptamer leading to the formation of G-quadruplex, and similarly, berberine also binds to the G-quadruplex. This leads to an enhancement of fluorescence of berberine while that of RQD and CDs were significantly quenched via FRET. The respective detection limits calculated were 3.6 μM and 3.8 μM, indicating these fluorescent aptasensor methods may be used for a wide variety of small molecules. Graphical abstract.

Hairpin-shaped DNA Templated Copper Nanoparticles for Fluorescence Detection of Adenosine Triphosphate Based on Ligation-mediated Exonuclease Cleavage

DNA-templated copper nanoparticles (CuNPs) have recently received considerable interest as functional fluorescent probes for biochemical analysis. In this work, a novel ATP-dependent ligation reactions (ATP-DLR) based ATP assay strategy was proposed by using hairpin-shaped (HS) DNA templated CuNPs as a fluorescent probe. Nick sealing by T4 DNA ligase leads to the formation of intact HS DNA, which can resist the exonuclease cleavage and be taken as the template for CuNPs formation, resulting in strong fluorescence. The proposed ATP detection is label free, sensitive and highly selective, and it has good linearity from 0.02 to 4 μM and a detection limit of 7 nM. This strategy is expected to promote the exploitation and application of DNA-templated CuNPs in biochemical and biomedical studies, and holds great promise in fluorescence detection for other ligation-related biomolecules.

Recent applications of the combination of mesoporous silica nanoparticles with nucleic acids: development of bioresponsive devices, carriers and sensors

The discovery and control of the biological roles mediated by nucleic acids have turned them into a powerful tool for the development of advanced biotechnological materials. Such is the importance of these gene-keeping biomacromolecules that even nanomaterials have succumbed to the claimed benefits of DNA and RNA. Currently, there could be found in the literature a practically intractable number of examples reporting the use of combination of nanoparticles with nucleic acids, so boundaries are demanded. Following this premise, this review will only cover the most recent and powerful strategies developed to exploit the possibilities of nucleic acids as biotechnological materials when in combination with mesoporous silica nanoparticles. The extensive research done on nucleic acids has significantly incremented the technological possibilities for those biomacromolecules, which could be employed in many different applications, where substrate or sequence recognition or modulation of biological pathways due to its coding role in living cells are the most promising. In the present review, the chosen counterpart, mesoporous silica nanoparticles, also with unique properties, became a reference material for drug delivery and biomedical applications due to their high biocompatibility and porous structure suitable for hosting and delivering small molecules. Although most of the reviews dealt with significant advances in the use of nucleic acid and mesoporous silica nanoparticles in biotechnological applications, a rational classification of these new generation hybrid materials is still uncovered. In this review, there will be covered promising strategies for the development of living cell and biological sensors, DNA-based molecular gates with targeting, transfection or silencing properties, which could provide a significant advance in current nanomedicine.

An ultrasensitive hollow-silica-based biosensor for pathogenic Escherichia coli DNA detection

A novel electrochemical DNA biosensor for ultrasensitive and selective quantitation of Escherichia coli DNA based on aminated hollow silica spheres (HSiSs) has been successfully developed. The HSiSs were synthesized with facile sonication and heating techniques. The HSiSs have an inner and an outer surface for DNA immobilization sites after they have been functionalized with 3-aminopropyltriethoxysilane. From field emission scanning electron microscopy images, the presence of pores was confirmed in the functionalized HSiSs. Furthermore, Brunauer-Emmett-Teller (BET) analysis indicated that the HSiSs have four times more surface area than silica spheres that have no pores. These aminated HSiSs were deposited onto a screen-printed carbon paste electrode containing a layer of gold nanoparticles (AuNPs) to form a AuNP/HSiS hybrid sensor membrane matrix. Aminated DNA probes were grafted onto the AuNP/HSiS-modified screen-printed electrode via imine covalent bonds with use of glutaraldehyde cross-linker. The DNA hybridization reaction was studied by differential pulse voltammetry using an anthraquinone redox intercalator as the electroactive DNA hybridization label. The DNA biosensor demonstrated a linear response over a wide target sequence concentration range of 1.0×10^-12-1.0×10^-2 μM, with a low detection limit of 8.17×10^-14 μM (R² = 0.99). The improved performance of the DNA biosensor appeared to be due to the hollow structure and rough surface morphology of the hollow silica particles, which greatly increased the total binding surface area for high DNA loading capacity. The HSiSs also facilitated molecule diffusion through the silica hollow structure, and substantially improved the overall DNA hybridization assay. Graphical abstract Step-by-step DNA biosensor fabrication based on aminated hollow silica spheres.

Thioflavin T behaves as an efficient fluorescent ligand for label-free ATP aptasensor

Here, we for the first time demonstrated thioflavin T (ThT) as an efficient fluorescent ligand for 27-mer ATP-binding aptamer (ABA27), providing a novel signal readout mode for label-free selective ATP detection. ABA27 can promote the fluorescence emission of ThT with an unprecedentedly high efficiency, attributed to the specific structure of ABA27 rather than the G-tracts. Polyacrylamide gel electrophoresis, fluorescence spectroscopy, and fluorometric titration reveal that ThT interacts with ABA27 with a lower binding affinity (Kd ~89 μM) than ATP, which allows ATP to easily compete with ThT for the DNA binder. In the presence of ThT, adding ATP induces ABA27 to undergo a structural change, thereby not favoring the binding to ThT, verified by circular dichroism and UV-Vis absorption spectroscopy. As a result, the fluorescence intensity of ThT decreases dramatically, enabling the sensitive detection of ATP with high selectivity over other analogs. Such a sensing strategy may make ThT able to serve as a facile signal reporter for DNA nanomechanical devices fueled with ATP. Graphical Abstract The principle of the displacement of ThT by ATP.

Optical Aptasensors for Adenosine Triphosphate

Nucleic acids are among the most researched and applied biomolecules. Their diverse two- and three-dimensional structures in conjunction with their robust chemistry and ease of manipulation provide a rare opportunity for sensor applications. Moreover, their high biocompatibility has seen them being used in the construction of in vivo assays. Various nucleic acid-based devices have been extensively studied as either the principal element in discrete molecule-like sensors or as the main component in the fabrication of sensing devices. The use of aptamers in sensors - aptasensors, in particular, has led to improvements in sensitivity, selectivity, and multiplexing capacity for a wide verity of analytes like proteins, nucleic acids, as well as small biomolecules such as glucose and adenosine triphosphate (ATP). This article reviews the progress in the use of aptamers as the principal component in sensors for optical detection of ATP with an emphasis on sensing mechanism, performance, and applications with some discussion on challenges and perspectives.

Dual aptamer-functionalized silica nanoparticles for the highly sensitive detection of breast cancer

In this study, we synthesized dual aptamer-modified silica nanoparticles that simultaneously target two types of breast cancer cells: the mucin 1 (MUC1)(+) and human epidermal growth factor receptor 2 (HER2)(+) cell lines. Dual aptamer system enables a broad diagnosis for breast cancer in comparison with the single aptamer system. The dye-doped silica nanoparticles offer great stability with respect to photobleaching and enable the accurate quantification of breast cancer cells. The morphological and spectroscopic characteristics of the designed Dual-SiNPs were demonstrated via diverse methods such as DLS, zeta potential measurements, UV-vis spectroscopy, and fluorescence spectroscopy. Negatively charged Dual-SiNPs with a homogeneous size distribution showed robust and strong fluorescence. In addition, Dual-SiNPs did not affect cell viability, implying that this probe might be readily available for use in an in vivo system. Through ratio optimization of the MUC1 and HER2 aptamers, the binding capacities of the Dual-SiNPs to both cell lines were maximized. Based on Dual-SiNPs, a highly sensitive quantification of breast cancer cells was performed, resulting in a detection limit of 1 cell/100 μL, which is significantly lower compared with those reported in other studies. Moreover, the developed detection platform displayed high selectivity for only the MUC1(+) and HER2(+) cell lines. It is expected that this valuable diagnostic probe will be a noteworthy platform for the diagnosis and prognosis of breast cancer.

Optical aptasensors for quantitative detection of small biomolecules: a review

Aptasensors are aptamer-based biosensors with excellent recognition capability towards a wide range of targets. Specially, there have been ever-growing interests in the development of aptasensors for the detection of small molecules. This phenomenon is contributed to two reasons. On one hand, small biomolecules play an important role in living organisms with many kinds of biological function, such as antiarrhythmic effect and vasodilator activity of adenosine. On the other hand, the concentration of small molecules can be an indicator for disease diagnosis, for example, the concentration of ATP is closely associated with cell injury and cell viability. As a potential analysis tool in the construction of aptasensors, optical analysis has attracted much more interest of researchers due to its high sensitivity, quick response and simple operation. Besides, it promises the promotion of aptasensors in performance toward a new level. Review the development of optical aptasensors for small biomolecules will give readers an overall understanding of its progress and provide some theoretical guidelines for its future development. Hence, we give a mini-review on the advance of optical aptasensors for small biomolecules. This review focuses on recent achievements in the design of various optical aptasensors for small biomolecules, containing fluorescence aptasensors, colorimetric aptasensors, chemiluminescence aptasensors and other optical aptasensors.

Detection of adenosine triphosphate through polymerization-induced aggregation of actin-conjugated gold/silver nanorods

We have developed a simple and selective nanosensor for the optical detection of adenosine triphosphate (ATP) using globular actin-conjugated gold/silver nanorods (G-actin-Au/Ag NRs). By simply mixing G-actin and Au/Ag NRs (length ~56 nm and diameter ~12 nm), G-actin-Au/Ag NRs were prepared which were stable in physiological solutions (25 mM Tris-HCl, 150 mM NaCl, 5.0 mM KCl, 3.0 mM MgCl2 and 1.0 mM CaCl2; pH 7.4). Introduction of ATP into the G-actin-Au/Ag NR solutions in the presence of excess G-actin induced the formation of filamentous actin-conjugated Au/Ag NR aggregates through ATP-induced polymerization of G-actin. When compared to G-actin-modified spherical Au nanoparticles having a size of 13 nm or 56 nm, G-actin-Au/Ag NRs provided better sensitivity for ATP, mainly because the longitudinal surface plasmon absorbance of the Au/Ag NR has a more sensitive response to aggregation. This G-actin-Au/Ag NR probe provided high sensitivity (limit of detection 25 nM) for ATP with remarkable selectivity (>10-fold) over other adenine nucleotides (adenosine, adenosine monophosphate and adenosine diphosphate) and nucleoside triphosphates (guanosine triphosphate, cytidine triphosphate and uridine triphosphate). It also allowed the determination of ATP concentrations in plasma samples without conducting tedious sample pretreatments; the only necessary step was simple dilution. Our experimental results are in good agreement with those obtained from a commercial luciferin-luciferase bioluminescence assay. Our simple, sensitive and selective approach appears to have a practical potential for the clinical diagnosis of diseases (e.g. cystic fibrosis) associated with changes in ATP concentrations.

Label-free chemiluminescent ATP aptasensor based on graphene oxide and an instantaneous derivatization of guanine bases

In this work, a novel label-free chemiluminescent (CL) aptasensor has been developed for rapid and facile detection of adenosine triphosphate (ATP, as model analyte) using graphene oxide (GO) nano-platform. The strategy relies on the preferential binding of GO to single-stranded DNA (ssDNA) over rigid double-stranded DNA (dsDNA) or aptamer-target complexes, and the instantaneous derivative reaction between phenylglyoxal (PGO), a special CL reagent as the signaling molecule, and guanine nucleobases (G) of aptamer strands adsorbed on the surface of GO. In the absence of ATP, the aptamers adsorbed onto the surface of GO leading to a strong background CL signal. Conversely, in the presence of ATP, the aptamers formed the aptamer-ATP complexes which had weak binding ability to GO resulting in a significant CL signal decrease. The CL intensity was adversely related to the ATP concentration in the assay solution. The biosensor's signal decreased linearly with the logarithm of the concentration of ATP from 2 to 80 nmol with a detection limit of 1.4 nmol. The aptasensor also showed high selectivity against cytosine triphosphate (CTP), guanosine triphosphate (GTP), and uridine triphosphate (UTP). The method presented here holds the advantages of being label-free, cost effective, rapid, sensitive and selective, which would shows great promise for clinical application.

A novel aptasensor for the ultra-sensitive detection of adenosine triphosphate via aptamer/quantum dot based resonance energy transfer

We designed a novel aptamer based biosensor (aptasensor) for ultrasensitive detection of adenosine triphosphate (ATP) through resonance energy transfer (RET). The ATP aptamer was modified with Cy3 at the 3' end, and a green quantum dot (525) was attached to the 5' end of its complementary sequence respectively. The ATP aptamer and its complementary sequence could assemble into a duplex structure in the absence of target ATP, and then decrease the distance between the quantum dot and Cy3 which could produce significant RET signal. Upon ATP binding, the ATP aptamer could dissociate with its complementary sequence and then increase the distance between the quantum dot and Cy3 which would significantly decrease the RET signal. Therefore, the ATP detection could be easily achieved through detection of the fluorescence intensity ratio between 525 nm and 560 nm. The results show that the emission fluorescence intensity ratio of 525/560 is linearly related to the logarithmic concentration of ATP. The linear range of this aptasensor is from 0.1 nM to 1 μM, and the detection limit is lower down to 0.01 nM. Excellent selectivity of this aptasensor for ATP has been demonstrated through the detection of thymidine triphosphate (TTP), cytidine triphosphate (CTP), guanosine triphosphate (GTP) and adenosine diphosphate (ADP) respectively as control. The method we described here could easily detect ATP with excellent selectivity, linearity and sensitivity down to the nanomolar range, as well as avoid photobleaching.

A highly selective turn-on ATP fluorescence sensor based on unmodified cysteamine capped CdS quantum dots

Unmodified cysteamine capped nanocrystalline cadmium sulfide quantum dots (Cys-CdS QDs) were demonstrated as a selective turn-on fluorescence sensor for sensing adenosine-5'-triphosphate (ATP) in aqueous solution for the first time. The fluorescence intensity of the Cys-CdS QDs was significantly enhanced in the presence of ATP. In addition, the fluorescence intensity of the Cys-CdS QDs increased when increasing ATP concentrations. On the other hand, other phosphate metabolites and other tested common anions did not significantly alter the fluorescence intensity of the Cys-CdS QDs. In addition, this sensor showed excellent discrimination of pyrophosphate (PPi) from ATP detection. The proposed sensor could efficiently be used for ATP sensing at very low concentration with LOD of 17 μM with the linear working concentration range of 20-80 μM. The feasibility of the proposed sensor for determining ATP in urine samples was also studied, and satisfactory results were obtained.

A highly selective sandwich-type FRET assay for ATP detection based on silica coated photon upconverting nanoparticles and split aptamer

In this paper, we report a highly selective sandwich-type fluorescence resonance energy transfer (FRET) assay for ATP detection by combining the unique optical properties of silica coated photon upconverting NaYF4:Yb(3+), Er(3+) nanoparticles (Si@UCNPs) with the high specific recognition ability of ATP aptamer. In the protocol, a single aptamer of ATP was split into two fragments. One of which was covalently attached to the Si@UCNPs at the 5' end, and the other was labeled with Black Hole Quencher-1 (BHQ1) at the 3' end. In the presence of ATP, the two fragments bound ATP with high affinity to form the sandwich complexes on the surface of Si@UCNPs. ATP induced association of the two fragments, thus bringing the Si@UCNPs and BHQ1 into close proximity. Under the illumination of 980 nm laser, energy transfer took place between the Si@UCNPs as the donor and BHQ1 as the acceptor, creating an optical "sandwich-type" assay for ATP detection. By monitoring the fluorescence change of the Si@UCNPs at 550 nm, the presence of the ATP could be quantitatively detected with a detection limit of 1.70 μM. The linear response range was 2 μM-16 μM. The background of this assay was ignorable because the fluorescence intensity of Si@UCNPs at 550 nm was not changed in the absence of ATP. This assay was also able to discriminate ATP from its analogs.

Signal-amplification detection of small molecules by use of Mg2+-dependent DNAzyme

Because small molecules can be beneficial or toxic in biology and the environment, specific and sensitive detection of small molecules is one of the most important objectives of the scientific community. In this study, new signal amplification assays for detection of small molecules based on Mg(2+)-dependent DNAzyme were developed. A cleavable DNA substrate containing a ribonucleotide, the ends of which were labeled with black hole quencher (BHQ) and 6-carboxyfluorescein (FAM), was used for fluorescence detection. When the small molecule of interest is added to the assay solution, the Mg(2+)-dependent DNAzyme is activated, facilitating hybridization between the Mg(2+)-dependent DNAzyme and the DNA substrate. Binding of the substrate to the DNAzyme structure results in hydrolytic cleavage of the substrate in the presence of Mg(2+) ions. The fluorescence signal was amplified by continuous cleavage of the enzyme substrate. Ochratoxin A (OTA) and adenosine triphosphate (ATP) were used as model analytes in these experiments. This method can detect OTA specifically with a detection limit as low as 140 pmol L(-1) and detect ATP specifically with a detection limit as low as 13 nmol L(-1). Moreover, this method is potentially extendable to detection of other small molecules which are able to dissociate the aptamer from the DNAzyme, leading to activation of the DNAzyme.

Aptamer-modified nanoparticles as biosensors

Aptamers are short oligonucleotides that are capable of selectively binding to their corresponding target. Therefore, they can be thought of as a nucleic acid-based alternative to antibodies and can substitute for their amino acid-based counterparts in analytical applications, including as receptors in biosensors. Here they offer several advantages because their nucleic acid nature and their binding via an induced fit mechanism enable novel sensing strategies. In this article, the utilization of aptamers as novel bio-receptors in combination with nanoparticles as transducer elements is reviewed. In addition to these analytical applications, the medical relevance of aptamer-modified nanoparticles is described.

Effective detection and cell imaging of prion protein with new prepared targetable yellow-emission silver nanoclusters

Silver nanoclusters (AgNCs) have gained considerable attention over a wide range from chemical detection to bioimaging applications. Herein we developed a facile way to synthesize water-soluble, intense fluorescent targetable AgNCs with yellow-emission by using DNA via a chemical reduction method. The sequence of DNA was designed to contain two fragments, one of which is the DNA aptamer fragment which can selectively bind to the target, and the other is rich in cytosine sequence fragments that can result in a high quantum efficiency. The as-prepared targetable AgNCs (Apt-AgNCs) through the reduction of silver ions (Ag(+)) by NaBH(4) have a very strong fluorescence emission, which, was greatly quenched upon specific binding to prion protein (PrP(C)). As a result, Apt-AgNCs were demonstrated as a novel, effective and sensitive probe for both detection and intracellular fluorescent imaging with high selectivity through the strong binding affinity between the aptamer and its target.

MUC-1 aptamer-conjugated dye-doped silica nanoparticles for MCF-7 cells detection

In this work, we have prepared three types of aptamer-conjugated Rubpy-doped silica nanoparticles for Human breast carcinoma MCF-7 cells labeling. Probe A is prepared through covalent conjugation between amine-labeled MUC-1 aptamer and carboxyl-modified Rubpy-doped NPs (NPs-aptamer). Probe B is prepared based on the interaction between biotin-labeled MUC-1 aptamer and avidin-conjugated Rubpy-doped NPs (NPs-avidin-biotin-aptamer). For Probe C, there is a PEG with flexible long chain as the bridge between avidin and the NPs (NPs-PEG-avidin-biotin-aptamer). In addition, we further investigate the practical number of MUC-1 aptamers on an NP of each probe using hoechst33258 dye. The binding efficiency of MUC-1 aptamer on the three types of probes as follows: Probe A < Probe B < Probe C. In addition, microscopic fluorescence imaging shows that Probe C containing the PEG molecules can be effectively applied for the recognition of MUC-1 protein in human breast carcinoma MCF-7 cells thus demonstrates that the PEG with flexible long chain as the bridge between the aptamer and NP can greatly enhances the freedom of MUC-1 aptamer. Compared with common organic dyes, the dye-doped silica nanoparticles serve as a stable bioprobe because of their facile conjugation with the desirable biomolecules, and have exhibited great potential in bioanalysis.

Drug targeting to infectious diseases by nanoparticles surface functionalized with special biomolecules

The potential to deliver nanoparticles directly into the targeted cells is important in the therapeutic applications for infectious diseases. The possibility of therapeutic agent being attached to the nanoparticles by chemical modification has provided a novel drug delivery option. Interestingly, the discovery of carbon nanotubes and graphene has given an excellent imaging and therapeutic agent for the biomedical applications. In spite of continuous advancement in pharmaceutical drug delivery viz. micelles, vesicles, liquid crystals, etc., during the past decades, their prohibitive production has limited their use. Nanomaterials with their properties of biodegradation, equal biodistribution, mass production, and long time storage make them attractive alternatives for future biomedical applications. Nanoparticles surface functionalized with specific biomolecules based drug delivery has driven new direction for modulating the pharmacokinetics, pharmacodynamics, biorecognition, and increasing the efficacy of targeted drugs. These new strategies are likely to minimize drug degradation and loss, increase drug availability, and opens up new vistas for drug delivery.