Quantum dots-based multifunctional dendritic superstructure for amplified electrochemiluminescence detection of ATP

Programmable T-Junction Structure-Assisted CRISPR/Cas12a Electrochemiluminescence Biosensor for Detection of Sa-16S rDNA

Herein, a strand displacement amplification (SDA)-assisted CRISPR/Cas12a (LbCpf1) electrochemiluminescence (ECL) biosensor was fabricated for ultrasensitive identification of Staphylococcus aureus (Sa)-16S rDNA. A porphyrinic Zr metal-organic framework (MOF) (PCN-224) nanomaterial was prepared as the coreactant accelerator, which promoted the conversion of S₂O₈^2- and SO₄^*-, thus enhancing the reaction with CdS quantum dots (QDs) and amplifying the ECL emission signal. Meanwhile, with the presence of Sa-16S rDNA, the auxiliary probes and primers stimulated the SDA reaction under the action of Klenow fragment (3'-5' exo-) and Nt. BbvCI specifically recognized Sa-16S rDNA to form a defective T-junction structure and generated second primers to initiate the cycles. Such a structure transformed the input signal (Sa-16S rDNA) into substantial single-stranded DNA products (SP) through SDA. SP acted as activators and activated arbitrary side chain cleavage of CRISPR/Cas12a (trans-cleavage) and further realized effective annihilation of ECL signals. This ECL platform demonstrated desirable assay performance for Sa-16S rDNA with a wide response range of 1 fM to 10 nM, and the limit of detection was 0.437 fM (S/N = 3), showing good sensitivity and specificity. Therefore, the method not only expanded the applications of CRISPR/Cas12a but also opened up a novel strategy for clinical diagnosis.

CRISPR-Cas12a-based efficient electrochemiluminescence biosensor for ATP detection

CRISPR-Cas12a system exhibits tremendous potential in accurate recognition and quantitation of nucleic acids and non-nucleic-acid targets thanks to the discovery of its cleavage capability toward single-stranded DNA (ssDNA). In this study, we developed an efficient electrochemiluminescence (ECL) sensing platform based on CRISPR-Cas12a for the analysis of adenosine triphosphate (ATP). In the presence of the target, the successful release of the DNA activator is specially recognized by Cas12a-crRNA duplex and activates the cleavage of ferrocene (Fc) labeled-ssDNA (Fc-ssDNA) modified on the cathode of bipolar electrode (BPE), resulting in a decrease of ECL intensity of [Ru(bpy)₃]²⁺/TPrA in the anodic cell of BPE. By means of the unique combination of Cas12a with ECL technique based on BPE, it can convert the recognition of target ATP into a detectable ECL signal. The detection limit of ATP was determined to be 0.48 nM under the optimal conditions. This work will expand the application of CRISPR-Cas detection system and propose a potential method for the analysis of non-nucleic-acid targets.

Recent Advances in Electrochemiluminescence Sensors for Pathogenic Bacteria Detection

Pathogenic bacterial contamination greatly threats human health and safety. Rapidly biosensing pathogens in the early stage of infection would be helpful to choose the correct drug treatment, prevent transmission of pathogens, as well as decrease mortality and economic losses. Traditional techniques, such as polymerase chain reaction and enzyme-linked immunosorbent assay, are accurate and effective, but are greatly limited because they are complex and time-consuming. Electrochemiluminescence (ECL) biosensors combine the advantages of both electrochemical and photoluminescence analysis and are suitable for high sensitivity and simple pathogenic bacteria detection. In this review, we summarize recent advances in ECL sensors for pathogenic bacteria detection and highlight the development of paper-based ECL platforms in point of care diagnosis of pathogens.

Graphene quantum dots-based electrochemiluminescence detection of DNA using multiple cycling amplification strategy

In this study, a novel strategy for amplified electrochemiluminescence (ECL) detection of DNA was proposed based on excellent ECL activity of graphene quantum dots (GQDs) coupled with multiple cycling amplification technique. A new type of graphene QDs with well ECL property and uniform size were firstly synthesized, then the graphene QDs were assembled on the electrode by poly (diallyldimethylammonium chloride) (PDDA)-graphene oxide (GO) nanocomposites, which could greatly improve ECL signal and stability of QDs. A novel signal-on ECL biosensor for DNA analysis was designed by using ECL quenching of gold nanoparticles (NPs) to graphene QDs combined with endonuclease-aided cyclic amplification strategy. As a result, the proposed strategy can be conveniently expanded to other biosensing application, especially in clinical diagnoses.

Direct Analysis of Biofluids by Mass Spectrometry with Microfluidic Voltage-Assisted Liquid Desorption Electrospray Ionization

Signal suppression by sample matrix in direct electrospray ionization-mass spectrometric (ESI-MS) analysis hampers its clinical and biomedical applications. We report herein the development of a microfluidic voltage-assisted liquid desorption electrospray ionization (VAL-DESI) source to overcome this limitation. Liquid DESI is achieved for the first time in a microfluidic format. Direct analysis of urine, serum, and cell lysate samples by using the proposed microfluidic VAL-DESI-MS/MS method to detect chemical compounds of biomedical interest, including nucleosides, monoamines, amino acids, and peptides is demonstrated. Analyzing a set of urine samples spiked with dihydroxyphenylalanine (DOPA) showed that the assay had a linear calibration curve with r² value of 0.997 and a limit of detection of 0.055 μM DOPA. The method was applied to simultaneous quantification of nucleosides, that is, cytidine, adenosine, uridine, thymidine, and guanosine in cell lysates using 8-bromoadenosine as internal standard. Adenosine was found most abundant at 26.5 ± 0.57 nmol/10⁶ cells, while thymidine was least at 3.1 ± 0.31 nmol/10⁶ cells. Interestingly, the ratio of adenosine to deoxyadenosine varied significantly from human red blood cells (1.07 ± 0.06) to cancerous cells, including lymphoblast TK6 (0.52 ± 0.02), skin melanoma C32 (0.82 ± 0.04), and promyelocytic leukemia NB4 cells (0.38 ± 0.06). These results suggest that the VAL-DESI-MS/MS technique has a good potential in direct analysis of biofluids. Further, because of the simplicity in its design and operation, the proposed microfluidic liquid DESI source can be fabricated as a disposable device for point-of-care measurements.

Quantum dots: from fluorescence to chemiluminescence, bioluminescence, electrochemiluminescence, and electrochemistry

During the past decade, nanotechnology has become one of the major forces driving basic and applied research. As a novel class of inorganic fluorochromes, research into quantum dots (QDs) has become one of the fastest growing fields of nanotechnology today. QDs are made of a semiconductor material with tunable physical dimensions as well as unique optoelectronic properties, and have attracted multidisciplinary research efforts to further their potential bioanalytical applications. Recently, numerous optical properties of QDs, such as narrow emission band peaks, broad absorption spectra, intense signals, and remarkable resistance to photobleaching, have made them biocompatible and sensitive for biological assays. In this review, we give an overview of these exciting materials and describe their potential, especially in biomolecules analysis, including fluorescence detection, chemiluminescence detection, bioluminescence detection, electrochemiluminescence detection, and electrochemical detection. Finally, conclusions are made, including highlighting some critical challenges remaining and a perspective of how this field can be expected to develop in the future.

Visual and Plasmon Resonance Absorption Sensor for Adenosine Triphosphate Based on the High Affinity between Phosphate and Zr(IV)

Zr(IV) can form phosphate and Zr(IV) (-PO₃^2--Zr⁴⁺-) complex owing to the high affinity between Zr(IV) with phosphate. Zr(IV) can induce the aggregation of gold nanoparticles (AuNPs), while adenosine triphosphate(ATP) can prevent Zr(IV)-induced aggregation of AuNPs. Herein, a visual and plasmon resonance absorption (PRA)sensor for ATP have been developed using AuNPs based on the high affinity between Zr(IV)with ATP. AuNPs get aggregated in the presence of certain concentrations of Zr(IV). After the addition of ATP, ATP reacts with Zr(IV) and prevents AuNPs from aggregation, enabling the detection of ATP. Because of the fast interaction of ATP with Zr(IV), ATP can be detected with a detection limit of 0.5 μM within 2 min by the naked eye. Moreover, ATP can be detected by the PRA technique with higher sensitivity. The A_520nm/A_650nm values in PRA spectra increase linearly with the concentrations of ATP from 0.1 μM to 15 μM (r = 0.9945) with a detection limit of 28 nM. The proposed visual and PRA sensor exhibit good selectivity against adenosine, adenosine monophosphate, guanosine triphosphate, cytidine triphosphate and uridine triphosphate. The recoveries for the analysis of ATP in synthetic samples range from 95.3% to 102.0%. Therefore, the proposed novel sensor for ATP is promising for real-time or on-site detection of ATP.

Sensitive electrochemiluminescence detection of cancer cells based on a CdSe/ZnS quantum dot nanocluster by multibranched hybridization chain reaction on gold nanoparticles

We prepared a novel amplified electrochemiluminescence signal probe based on CdSe/ZnS quantum dots by multibranched DNA hybridization chain reaction on gold nanoparticles, and developed a sensitive ECL biosensor for detection of cancer cells.

CdS-modified porous foam nickel for label-free highly efficient detection of cancer cells

CdS-modified foam nickel (FN) was successfully constructed for the effective detection of cancer cells based on an electrochemiluminescence (ECL) technique and provides a new platform for the realization of an ECL sensor for cancer cells.

A cascade amplification strategy based on rolling circle amplification and hydroxylamine amplified gold nanoparticles enables chemiluminescence detection of adenosine triphosphate

A highly sensitive and selective chemiluminescent (CL) biosensor for adenosine triphosphate (ATP) was developed by taking advantage of the ATP-dependent enzymatic reaction (ATP-DER), the powerful signal amplification capability of rolling circle amplification (RCA), and hydroxylamine-amplified gold nanoparticles (Au NPs). The strategy relies on the ability of ATP, a cofactor of T4 DNA ligase, to trigger the ligation-RCA reaction. In the presence of ATP, the T4 DNA ligase catalyzes the ligation reaction between the two ends of the padlock probe, producing a closed circular DNA template that initiates the RCA reaction with phi29 DNA polymerase and dNTP. Therein, many complementary copies of the circular template can be generated. The ATP-DER is eventually converted into a detectable CL signal after a series of processes, including gold probe hybridization, hydroxylamine amplification, and oxidative gold metal dissolution coupled with a simple and sensitive luminol CL reaction. The CL signal is directly proportional to the ATP level. The results showed that the detection limit of the assay is 100 pM of ATP, which compares favorably with those of other ATP detection techniques. In addition, by taking advantage of ATP-DER, the proposed CL sensing system exhibits extraordinary specificity towards ATP and could distinguish the target molecule ATP from its analogues. The proposed method provides a new and versatile platform for the design of novel DNA ligation reaction-based CL sensing systems for other cofactors. This novel ATP-DER based CL sensing system may find wide applications in clinical diagnosis as well as in environmental and biomedical fields.

Multiplex detection and genotyping of pathogenic bacteria on paper-based biosensor with a novel universal primer mediated asymmetric PCR

Traditionary multiplex asymmetric polymerase chain reaction (PCR) can be applied to detect multiplex target organisms simultaneously, but complex optimizations of primer concentrations and staggered additions of primers are required to achieve equal amplification of multiplex genes. To overcome this shortcoming, we propose a novel method based on multiplex asymmetric PCR and paper-based nucleic acid diagnostics (PBNAD). In the asymmetric PCR, a universal primer was introduced to break the bottlenecks of low sensitivity and self-inhibition among different sets of primers. Amplification using the novel multiplex asymmetric PCR boosted the quantity of single-stranded amplicons, and the amplified products contained the same sequence at the 5' end. Therefore, only one gold nanoparticle-based signal probe was needed for the simultaneous detection of three genes using the PBNAD platform, and the detection signals could be observed with the naked eye. With this highly efficient, novel multiplex asymmetric PCR, as little as 1 pg/μL genomic DNA can be detected. This method can also be applied to genotyping for reliable epidemiological investigations. This proof-of-concept study highlights the potential of the PBNAD platform for cost- and labor-effective applications in the detection of pathogenic bacteria.

Electrochemiluminescence aptasensor based on bipolar electrode for detection of adenosine in cancer cells

Here we report a novel approach for the detection of adenosine in cancer cells by electrochemiluminescence (ECL) on a wireless indium tin oxide bipolar electrode (BPE). In this approach, ferrocene (Fc) which is labeled on adenosine aptamer is enriched on one pole of the BPE by hybridization with its complementary DNA (ssDNA) and oxidized to Fc(+) under an external voltage of 5.0V at the two ends of BPE. Then, a reversed external voltage was added on the BPE, making Fc(+) enriched pole as cathode. The presence of Fc(+) promotes the oxidation reaction on the anodic pole of the BPE, resulting in a significant increase of ECL intensity using Ru(bpy)3(2+)/tripropylamine (TPA) system as test solution. The presence of target adenosine was reflected by the ECL signal decrease on the anodic pole caused by the target-induced removal of ferrocene-aptamer on the cathodic pole. The decrease of ECL signal was logarithmically linear with the concentration of ATP in a wide range from 1.0 fM to 0.10 μM. This ECL biosensing system could accurately detect the level of adenosine released from cancer cells.

Cathodic electrochemiluminescence immunosensor based on nanocomposites of semiconductor carboxylated g-C3N4 and graphene for the ultrasensitive detection of squamous cell carcinoma antigen

A novel label-free electrochemiluminescence (ECL) immunosensor was developed for the detection of squamous cell carcinoma antigen (SCCA) based on nanocomposites of semiconductor carboxylated graphitic carbon nitride (g-C3N4) and graphene (g-C3N4-graphene). The ECL intensity of carboxylated g-C3N4 was much enhanced after being combined with graphene which had excellent electron-transfer ability. The sensing platform was constructed by depositing g-C3N4-graphene on electrodes and immobilizing antibodies on the surface of carboxylated g-C3N4 through amidation. The specific immunoreaction between SCCA and antibody resulted in the decrease of ECL intensity and the intensity decreased linearly with the logarithm of SCCA concentration in the range of 0.025-10 ng mL(-1) with a detection limit of 8.53 pg mL(-1). The developed ECL immunosensor exhibited high sensitivity, good reproducibility and long-term stability, which possessed great potential for cancer detection in clinical laboratory diagnosis.

Detection of adenosine triphosphate through polymerization-induced aggregation of actin-conjugated gold/silver nanorods

We have developed a simple and selective nanosensor for the optical detection of adenosine triphosphate (ATP) using globular actin-conjugated gold/silver nanorods (G-actin-Au/Ag NRs). By simply mixing G-actin and Au/Ag NRs (length ~56 nm and diameter ~12 nm), G-actin-Au/Ag NRs were prepared which were stable in physiological solutions (25 mM Tris-HCl, 150 mM NaCl, 5.0 mM KCl, 3.0 mM MgCl2 and 1.0 mM CaCl2; pH 7.4). Introduction of ATP into the G-actin-Au/Ag NR solutions in the presence of excess G-actin induced the formation of filamentous actin-conjugated Au/Ag NR aggregates through ATP-induced polymerization of G-actin. When compared to G-actin-modified spherical Au nanoparticles having a size of 13 nm or 56 nm, G-actin-Au/Ag NRs provided better sensitivity for ATP, mainly because the longitudinal surface plasmon absorbance of the Au/Ag NR has a more sensitive response to aggregation. This G-actin-Au/Ag NR probe provided high sensitivity (limit of detection 25 nM) for ATP with remarkable selectivity (>10-fold) over other adenine nucleotides (adenosine, adenosine monophosphate and adenosine diphosphate) and nucleoside triphosphates (guanosine triphosphate, cytidine triphosphate and uridine triphosphate). It also allowed the determination of ATP concentrations in plasma samples without conducting tedious sample pretreatments; the only necessary step was simple dilution. Our experimental results are in good agreement with those obtained from a commercial luciferin-luciferase bioluminescence assay. Our simple, sensitive and selective approach appears to have a practical potential for the clinical diagnosis of diseases (e.g. cystic fibrosis) associated with changes in ATP concentrations.

An ultrasensitive quantum dots fluorescent polarization immunoassay based on the antibody modified Au nanoparticles amplifying for the detection of adenosine triphosphate

In this work, an ultrasensitive fluorescent polarization immunoassay (FPIA) method based on the quantum dot/aptamer/antibody/gold nanoparticles ensemble has been developed for the detection of adenosine triphosphate (ATP). DNA hybridization is formed when ATP is present in the PBS solution containing the DNA-conjugated quantum dots (QDs) and antibody-AuNPs. The substantial sensitivity improvement of the antibody-AuNPs-enhanced method is mainly attributed to the slower rotation of fluorescent unit when QDs-labeled oligonucleotides hybridize with antibody modified the gold nanoparticle. As a result, the fluorescent polarization (FP) values of the system increase significantly. Under the optimal conditions, a linear response with ATP concentration is ranged from 8×10(-12) M to 2.40×10(-4) M. The detection limit reached as low as 1.8 pM. The developed work provides a sensitive and selective immunoassay protocol for ATP detection, which could be applied in more bioanalytical systems.

A highly selective turn-on ATP fluorescence sensor based on unmodified cysteamine capped CdS quantum dots

Unmodified cysteamine capped nanocrystalline cadmium sulfide quantum dots (Cys-CdS QDs) were demonstrated as a selective turn-on fluorescence sensor for sensing adenosine-5'-triphosphate (ATP) in aqueous solution for the first time. The fluorescence intensity of the Cys-CdS QDs was significantly enhanced in the presence of ATP. In addition, the fluorescence intensity of the Cys-CdS QDs increased when increasing ATP concentrations. On the other hand, other phosphate metabolites and other tested common anions did not significantly alter the fluorescence intensity of the Cys-CdS QDs. In addition, this sensor showed excellent discrimination of pyrophosphate (PPi) from ATP detection. The proposed sensor could efficiently be used for ATP sensing at very low concentration with LOD of 17 μM with the linear working concentration range of 20-80 μM. The feasibility of the proposed sensor for determining ATP in urine samples was also studied, and satisfactory results were obtained.