Pyrenecarboxaldehyde@Graphene Oxide Acted as a Highly Efficient ECL Emitter and Target-Triggered the Recyclable Cascade System as an Amplifier for Ultrasensitive APE1 Activity Detection

Herein, pyrenecarboxaldehyde@graphene oxide (Pyc@GO) sheets with highly efficient electrochemiluminescence (ECL) as emitters were prepared by a noncovalent combination to develop a neoteric ECL biosensing platform for the ultrasensitive assessment of human apurinic/apyrimidinic endonuclease1 (APE1) activity. Impressively, the pyrenecarboxaldehyde (Pyc) molecules were able to form stable polar functional groups on the surface of GO sheets through the noncovalent π-π stacking mechanism to prevent intermolecular restacking and simultaneously generate Pyc@GO sheets. Compared with the tightly packed PAH nanocrystals, the Pyc@GO sheets significantly reduced internal filtering effects and diminished nonactivated emitters to enhance ECL intensity and achieve strong ECL emission. Furthermore, the APE1-activated initiators could trigger the recyclable cascade amplified system based on the synergistic cross-activation between catalytic hairpin assembly (CHA) and DNAzyme, which improved the signal amplification and transduction ability. Consequently, the developed ECL platform for the detection of APE1 activity displayed exceptional sensitivity with a low detection limit of 4.6 × 10-9 U·mL-1 ranging from 10-8 to 10-2 U·mL-1. Therefore, the proposed strategy holds great promise for the future development of sensitive and reliable biosensing platforms for the detection of various biomarkers.

Antifouling Electrochemiluminescence Biosensor Based on Bovine Serum Albumin Hydrogel for the Accurate Detection of p53 Gene in Human Serum

To detect biomarkers in complex samples, it is fundamental to avoid the nonspecific adsorption of impurities to improve the selectivity of biosensors. In this study, a sensitive antifouling electrochemiluminescence biosensor was proposed based on bovine serum albumin (BSA)- and exonuclease III (Exo III)-mediated nucleic acid cycle signal amplification strategy. Ti3C2Tx-NH4, which has a large surface area and high metal conductivity, was crosslinked with BSA to improve the conductivity of the sensing interface, which shows antifouling performance excellently due to the electrical neutrality and good hydrophilicity of BSA hydrogel. The cyclic amplification strategy based on Exo III and DNA hybridization chain reaction significantly amplified the electrochemiluminescence signal and improved the sensitivity of p53 gene detection. The linear range of the biosensor is 1 fM-1 nM with a detection limit of 0.26 fM. More importantly, the sensor showed excellent selectivity when it was used to detect the p53 gene in real samples, such as serum. Thus, this unique antifouling sensing interface is expected to construct various electrochemical biosensors in clinical diagnosis and biopathological analysis.

Programmable Y-Shaped Probes with Proximity Bivalent Recognition for Rapid Electrochemiluminescence Response of Acute Myocardial Infarction

Herein, an exogenous luminophore-free and disposable electrochemiluminescence (ECL) biosensor was established for rapid response of acute myocardial infarction (AMI) using programmable Y-shaped probes (Y-probes) with proximity bivalent recognition. Specifically, the indium tin oxide thin film coated glass electrode (ITO) was modified with urchin-like porous TiO₂ microspheres (pTiO₂ MSs), which could achieve strong and stable ECL in S₂O₈^2- solution due to the dual promoting effect of the coreaction accelerator pTiO₂ MSs, exhibiting 2.7-fold higher ECL intensity in comparison with that of bare ITO. Moreover, the Y-probes as bivalent recognition elements containing two kinds of cardiac troponin I (cTnI, a biomarker of AMI) aptamers and a linker labeled with ferrocene (L-Fc) were designed to export a "signal off" mode. When the target cTnI was in the proximity of the Y-probes, the L-Fc was separated from the electrode surface due to the proximity recognition of cTnI and its aptamers, achieving the highly effective recovery of ECL, which allowed for a much more rapid detection of cTnI than the sandwich-type immunoassay. As a proof of concept, an exogenous luminophore-free and disposable ECL platform for rapid and sensitive monitoring of cTnI was obtained and displayed a desired linear range from 100 fg mL^-1 to 100 ng mL^-1 with a limit of detection (LOD) of 30.1 fg mL^-1, which can be ingeniously expanded as a portable home tester with ECL biosensors developments.

Wireframe Orbit-Accelerated Bipedal DNA Walker for Electrochemiluminescence Detection of Methyltransferase Activity

In spite of the DNA walkers executing the signal accumulation task in the process of moving along the predetermined paths, the enhancement of walking dynamics and walking path controllability are still challenging due to the unprogrammed arrangements of DNA orbits. Taking these dilemmas into account, a bipedal DNA walker was designed skillfully by the virtue of wireframe orbits assembled by DNA cubes in order, which improved the efficiency and the continuity of walking. It could be attributed to the fact that both the contact chance and the dynamic interaction between walking strands and designated orbits were beneficial to minimize the possibility of derailment and improve the accumulation of signal. In addition, the hollow titanium dioxide nanospheres coated with rubrene (Rub@TiO₂ NSs) were prepared by the etching of inner silicon dioxide nanoparticles (SiO₂ NPs) to regulate the distribution pattern of rubrene (Rub) molecules and expose more electrochemically active sites for high-efficient electrochemiluminescence (ECL). Benefiting by the pore confinement-enhanced ECL, the electron and mass transfer was significantly accelerated because of the hollow structure of Rub@TiO₂ NSs. Subsequently, endogenous dissolved oxygen as the coreactant and palladium nanoparticles (Pd NPs) as the coreaction accelerator were employed to constitute a ternary ECL system with explosive signal response. Combining with this ECL platform, the bipedal walker activated by the target can autonomously and directionally move on the DNA wireframe orbits to release the quenching probes continuously. In this way, the biosensor displayed a low detection limit (2.30 × 10^-8 U·mL^-1) and a wide linear range (1.0 × 10^-7 to 1.0 × 10^-1 U·mL^-1) for the sensitive detection of Dam methyltransferase (Dam MTase) activity. Therefore, a novel strategy for the accurate quantification of epigenetic targets was developed by virtue of improving the walking dynamics of DNA walker and amplifying the ECL of Rub molecules.

Electrochemiluminescence Biosensor for Nucleolin Imaging in a Single Tumor Cell Combined with Synergetic Therapy of Tumor

Nucleolin, a nuclear biological multifunctional protein, plays significant roles in modulating the proliferation, survival, and apoptosis of tumor cells. Different from the traditional electrochemiluminescence (ECL) method, a new ECL biosensor was built to perform ECL imaging of nucleolin in a single HeLa cell with high sensitivity and throughput. Briefly, mesoporous silica nanoparticles (MSN) loaded with doxorubicin (DOX) and phorbol 12-myristate 13-acetate (PMA) were used as drug carriers and could be specifically opened by nucleolin in a HeLa cell. PMA then induced the HeLa cell to produce reactive oxygen species (ROS) and realized ECL imaging of nucleolin. After that, ROS could damage DNA and proteins of the tumor cell and DOX could induce the apoptosis of HeLa cells by inhibiting genetic material, nucleic acid, synthesis. HeLa cells were then efficiently killed by DOX and ROS in a synergetic pathway. Herein, a new ECL biosensor for ECL imaging of nucleolin in a single HeLa cell and synergetic tumor therapy was built.

Recent Advances in Electrochemiluminescence Sensors for Pathogenic Bacteria Detection

Pathogenic bacterial contamination greatly threats human health and safety. Rapidly biosensing pathogens in the early stage of infection would be helpful to choose the correct drug treatment, prevent transmission of pathogens, as well as decrease mortality and economic losses. Traditional techniques, such as polymerase chain reaction and enzyme-linked immunosorbent assay, are accurate and effective, but are greatly limited because they are complex and time-consuming. Electrochemiluminescence (ECL) biosensors combine the advantages of both electrochemical and photoluminescence analysis and are suitable for high sensitivity and simple pathogenic bacteria detection. In this review, we summarize recent advances in ECL sensors for pathogenic bacteria detection and highlight the development of paper-based ECL platforms in point of care diagnosis of pathogens.

Bioactivity-Protected Electrochemiluminescence Biosensor Using Gold Nanoclusters as the Low-Potential Luminophor and Cu2S Snowflake as Co-reaction Accelerator for Procalcitonin Analysis

The expansion of electrochemiluminescence (ECL) technology to immunoassay at the core of care emphasizes all immune molecules will not be inactivated in the analysis process. That poses a major challenge to ECL-based biosensors due to the deoxynucleotide sequences of an antigen or antibody could be oxidized through a route of excessive cyclic potential. Herein, an ultrasensitive ECL biosensor was developed based on a novel bioactivity-protected sensing strategy utilizing Au nanoclusters (Au NCs) as low-potential luminophor for detection of procalcitonin (PCT). Bovine serum albumin (BSA)-templated Au NCs exhibited a low-potential anodic ECL signal in triethylamine (TEA) solution at 0.87 V, where it is suitable for the survival of immune molecules. Taking advantage of good conductivity and high surface area, a Cu₂S snowflake not only functions as a satisfying substrate for connecting immune molecules but also acts as co-reaction accelerator to produce more cationic radicals TEA^•+, which could improve the ECL intensity needed to meet the requirements of trace analysis. Otherwise, HWRGWVC (HC-7) heptapeptide as specific antibody immobilizer for site-oriented fixation was introduced to further maintain the bioactivity of an antibody. In view of the preceding discussion, the obtained biosensor exhibited ultrahigh immune recognition to targets so that the detection limit was as low as an unprecedented value of 2.36 fg/mL, which will be of great significance to the application and development of a biosensor in the future.

Highly Sensitive and Quality Self-Testable Electrochemiluminescence Assay of DNA Methyltransferase Activity Using Multifunctional Sandwich-Assembled Carbon Nitride Nanosheets

DNA methylation catalyzed by methylase plays a key role in many biological activities. However, developing a highly sensitive, simple, and reliable way for evaluation of DNA methyltransferase (MTase) activity is still a challenge. Here, we report a sandwich-assembled electrochemiluminescence (ECL) biosensor using multifunctional carbon nitride nanosheets (CNNS) to evaluate the Dam MTase activity. The CNNS could not only be used as an excellent substrate to conjugate a large amount of hairpin probe DNA to improve the sensitivity but also be utilized as an internal reliability checker and an analyte reporter in the bottom and top layers of the biosensor, respectively. Such a unique sandwich configuration of CNNS well coupled the advantages of ECL luminophor that were generally assembled in the bottom or top layer in a conventional manner. As a result, the biosensor exhibited an ultralow detection limit down to 0.043 U/mL and a linear range between 0.05 and 80 U/mL, superior to the MTase activity assay in most previous reports. We highlighted the great potential of emerging CNNS luminophor in developing highly sensitive and smart quality self-testable ECL sensing systems using a sandwiched configuration for early disease diagnosis, treatment, and management.