Highly sensitive and selective photoelectrochemical DNA sensor for the detection of Hg2+ in aqueous solutions

Recent Progress in Photoelectrochemical Sensing of Pesticides in Food and Environmental Samples: Photoactive Materials and Signaling Mechanisms

Pesticides have become an integral part of modern agricultural practices, but their widespread use poses a significant threat to human health. As such, there is a pressing need to develop effective methods for detecting pesticides in food and environmental samples. Traditional chromatography methods and common rapid detection methods cannot satisfy accuracy, portability, long storage time, and solution stability at the same time. In recent years, photoelectrochemical (PEC) sensing technology has gained attention as a promising approach for detecting various pesticides due to its salient advantages, including high sensitivity, low cost, simple operation, fast response, and easy miniaturization, thus becoming a competitive candidate for real-time and on-site monitoring of pesticide levels. This review provides an overview of the recent advancements in PEC methods for pesticide detection and their applications in ensuring food and environmental safety, with a focus on the categories of photoactive materials, from single semiconductor to semiconductor-semiconductor heterojunction, and signaling mechanisms of PEC sensing platforms, including oxidation of pesticides, steric hindrance, generation/decrease in sacrificial agents, and introduction/release of photoactive materials. Additionally, this review will offer insights into future prospects and confrontations, thereby contributing novel perspectives to this evolving domain.

DNA intercalation makes possible superior-gain organic photoelectrochemical transistor detection

DNA intercalation has increasingly been studied for various scenario implementations due to the diverse functions of DNA/intercalators. Nascent organic photoelectrochemical transistor (OPECT) biosensing taking place in organic electronics and photoelectrochemical bioanalysis represents a promising technological frontier in the arena. In this work, we first devise DNA intercalation-enabled OPECT for miRNA detection with a superior gain up to 17100. Intercalation of [Ru(bpy)2dppz]2+ within the miRNA-initiated hybrid chain reaction (HCR)-derived duplex DNA is realized for producing anodic photocurrent upon light stimulation, causing the corresponding target-dependent alternation in gate voltage (VG) and hence the modulated channel current (IDS) of poly (3,4-ethylenedioxythiophene) doped with poly (styrene sulfonate) (PEDOT:PSS) under specific drain voltage (VDS) for quantitative miRNA-21 analysis, which shows a wide linear relationship and a low detection limit of 5.5 × 10-15 mol L-1. This study features the DNA intercalation-enabled organic electronics with superior gain and is envisaged to attract more attention to explore DNA adducts for innovative bioelectronics and biosensing, given the diverse DNA binders with multiple functions.

In Situ Microfluidic SERS Chip for Ultrasensitive Hg2+ Sensing Based on I--Functionalized Silver Aggregates

Mercury(II) ions are causing serious environmental pollution and health damage. Developing a simple, rapid, and sensitive sensor for Hg²⁺ detection is of great significance. Herein, we demonstrate an I^--functionalized surface-enhanced Raman scattering (SERS) substrate for rapid and sensitive Hg²⁺ sensing on a highly integrated microfluidic platform. Based on the combination reaction between I^- and Hg²⁺, the Hg²⁺ sensing is achieved via the SERS intensity "turn-off" strategy, where HgI₂ precipitation is formed on an SERS substrate interface, dissociating the Raman reporters that coadsorbed with I^-. Owing to the strong binding constant between I^- and Hg²⁺, our I^--functionalized substrate demonstrates a very fast sensing response (∼150 s). Through reliable in situ SERS detection, a robust calibration curve between the "turn-off" signal and "lgC" is obtained in a broad concentration range of 10^-9 to 10^-13 M. Additionally, the detectable Hg²⁺ concentration can be as low as 1 fM. The good selectivity toward Hg²⁺ is also verified by testing about a dozen common metal ions in water, such as K⁺, Na⁺, Ca²⁺, Mg²⁺, and so forth. Furthermore, we apply the SERS sensor for real tap and lake water sample detection, and good recoveries of 113, 97, and 107% are obtained. With its advantages of high integration, simple preparation, fast response, high sensitivity, and reliability, the proposed I^--functionalized SERS sensor microfluidic chip can be a promising platform for real-time and on-site Hg²⁺ detection in natural water.

Liquid-Phase Exfoliated GeSe Nanoflakes for Photoelectrochemical-Type Photodetectors and Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) systems represent powerful tools to convert electromagnetic radiation into chemical fuels and electricity. In this context, two-dimensional (2D) materials are attracting enormous interest as potential advanced photo(electro)catalysts and, recently, 2D group-IVA metal monochalcogenides have been theoretically predicted to be water splitting photocatalysts. In this work, we use density functional theory calculations to theoretically investigate the photocatalytic activity of single-/few-layer GeSe nanoflakes for both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) in pH conditions ranging from 0 to 14. Our simulations show that GeSe nanoflakes with different thickness can be mixed in the form of nanoporous films to act as nanoscale tandem systems, in which the flakes, depending on their thickness, can operate as HER- and/or OER photocatalysts. On the basis of theoretical predictions, we report the first experimental characterization of the photo(electro)catalytic activity of single-/few-layer GeSe flakes in different aqueous media, ranging from acidic to alkaline solutions: 0.5 M H2SO4 (pH 0.3), 1 M KCl (pH 6.5), and 1 M KOH (pH 14). The films of the GeSe nanoflakes are fabricated by spray coating GeSe nanoflakes dispersion in 2-propanol obtained through liquid-phase exfoliation of synthesized orthorhombic (Pnma) GeSe bulk crystals. The PEC properties of the GeSe nanoflakes are used to design PEC-type photodetectors, reaching a responsivity of up to 0.32 AW-1 (external quantum efficiency of 86.3%) under 455 nm excitation wavelength in acidic electrolyte. The obtained performances are superior to those of several self-powered and low-voltage solution-processed photodetectors, approaching that of self-powered commercial UV-Vis photodetectors. The obtained results inspire the use of 2D GeSe in proof-of-concept water photoelectrolysis cells.

Synthesis, structure-fluorescence relationships and density functional theory studies of novel naphthalimide-piperazine-pyridine-based polystyrene sensors for Hg(ii) detection

Two novel naphthalimide-piperazine-pyridine-based polystyrene solid-phase fluorescent sensors PS-NA and PS-ND with different lengths of the linker were synthesized and shown to be able to detect Hg(ii) ions. Their structures were characterized by Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM) analysis. Fluorescence properties, including response time, pH effects, fluorescence titration, metal ion selectivity and regeneration, were investigated and compared. Sensor PS-NA displayed a higher fluorescence response to Hg(ii) than PS-ND, with a lower detection limit of 1.01 μM. The detection mechanism involving the Hg(ii) chelation-induced photo-induced electron transfer (PET) was proposed with the aid of density functional theory (DFT) calculations. Sensors PS-NA and PS-ND with seven other similar sensors from our previous studies were collected together for thorough structure-fluorescence relationship (SFR) studies. Sensor PS-NA being recyclable and environmentally friendly was successfully employed in the fluorescence detection of Hg(ii) in real water samples, indicating its good potential in practical application.

Fluorescent difference between two rhodamine-PAHs polystyrene solid-phase sensors for Hg(II) detection based on crystal structure and density functional theory calculation

Two novel rhodamine-polystyrene solid-phase fluorescence sensors PS-RB-2 and PS-R6G-2 with pyrene or naphthalene as fluorophore were synthesized for Hg(II) detection. Their structures were characterized by Fourier transform infrared (FTIR) spectra and scanning electron micrographs (SEM). Sensor PS-RB-2 displayed higher selectivity and sensitivity to Hg(II), with a lower detection limit of 0.065 μM. A detection mechanism involving the Hg(II) chelation-induced spirocycle open of rhodamine was proposed and discussed from theoretic level based on crystal structures and density functional theory (DFT) calculations. Sensor PS-RB-2 with recyclable and environment-friendly performance was successfully employed to fluorescent detection of Hg(II) in real water and fish samples, indicating its good potential in practical application. Its solid phase extraction columns were developed for rapid detection of Hg(II) by observing the color change with the naked eyes.

Synergetic Ag2S and ZnS quantum dots as the sensitizer and recognition probe: A visible light-driven photoelectrochemical sensor for the "signal-on" analysis of mercury (II)

A visible-light-driven photoelectrochemical (PEC) sensor has been developed for the "signal-on" analysis of Hg²⁺ by the synergetic combination of low-bandgap Ag₂S and wide-bandgap ZnS quantum dots (QDs). Ag₂S QDs were synthesized with bead-chain-like structure by the self-assembly route and further covalently bound with ZnS QDs to be coated onto the indium tin oxide (ITO) electrodes. It was discovered that the ZnS@Ag₂S-modified electrodes could display the visible-light-driven PEC behavior, of which Ag₂S and ZnS QDs could act as the PEC sensitizer and Hg²⁺-recognition probe, respectively. More importantly, the photocurrent responses of the developed electrodes could be specifically turned on in the presence of Hg²⁺ under the visible-light irradiation, presumably due to that Hg²⁺ might conduct a Zn-to-Hg exchange on ZnS QDs to trigger the formation of HgS/ZnS@Ag₂S heterojunction towards the enhanced electron-hole separation. The as-prepared PEC sensor could facilitate the detection of Hg²⁺ with concentrations ranging from 0.010-1000 nM, with a detection limit of about 1.0 pM. Besides, the feasibility of practical applications of the developed PEC analysis strategy was verified by probing Hg²⁺ in environmental water samples. Such a visible-light-driven PEC detection platform with the unique "turn-on" signal output may promise for the extensive applications for Hg²⁺ evaluation.

Monitoring of drug resistance towards reducing the toxicity of pharmaceutical compounds: Past, present and future

Drug resistance is worldwide health care crisis which decrease drug efficacy and developing toxicities. Effective resistance detection techniques could alleviate treatment cost and mortality associated with this crisis. In this review, the conventional and modern analysis methods for monitoring of drug resistance are presented. Also, various types of emerging rapid and sensitive techniques including electrochemical, electrical, optical and nano-based methods for the screening of drug resistance were discussed. Applications of various methods for the sensitive and rapid detection of drug resistance are investigated. The review outlines existing key issues in the determination which must be overcome before any of these techniques becomes a feasible method for the rapid detection of drug resistance. In this review, the roles of nanomaterials on development of novel methods for the monitoring of drug resistance were presented. Also, limitations and challenges of conventional and modern methods were discussed.

A dual mode photoelectrochemical sensor for nitrobenzene and L-cysteine based on 3D flower-like Cu2SnS3@SnS2 double interfacial heterojunction photoelectrode

In this work, 3D hierarchical Cu₂SnS₃@SnS₂ flower assembled from nanopetals with sandwich-like Cu₂SnS₃-SnS₂-Cu₂SnS₃ double interfacial heterojunction was successfully designed and synthesized on fluoride doped tin oxide (FTO) for photoelectrochemical (PEC) sensor by in situ electrodeposition p-type Cu₂SnS₃ nanoparticles on both inner and outer surfaces of n-type SnS₂ nanopetals. The unique double interfacial heterojunction simultaneously combines 3D flower-like architectures to drastically increase the light trapping and absorption in visible-near infrared range (Vis-NIR), and dramatically inhibites the charge carrier recombination, which is crucial for boosting the PEC activity. Benefitting from the shape and compositional merits, the Cu₂SnS₃@SnS₂ heterojunction possess dual-mode signal by controlling the electrodeposition time to manipulate the composition ratio of Cu₂SnS₃ and SnS₂. The Cu₂SnS₃@SnS₂/FTO electrode not only exhibits excellent photoeletro-reduction capacity for ultra-sensitive sensing trace persistent organic pollutant (nitrobenzene, NB), but also presents photoeletro-oxidization activity for high selective detection of L-cysteine (L-Cys) without any auxiliary enzyme under the light illumination. Dual mode sensor displayed superb performance for the detection of NB/L-Cys, showing a wide linear range from 100 pM to 300 μM/10 nM to 100 μM and a low detection limit (3S/N) of 68 pM/8.5 nM, respectively. Such a tunable double interfacial heterojunction design opened up new avenue for constructing multifunction PEC sensing platform.

Recent developments of photoelectrochemical biosensors for food analysis

Recent developments of photoelectrochemical biosensors for food analysis are summarized and the future prospects in this field are discussed.

R-phycoerythrin proteins@ZIF-8 composite thin films for mercury ion detection

Fluorescent R-phycoerythrin proteins were encapsulated into ZIF-8 thin films for colorimetric detection of mercury ions with high sensitivity and selectivity.

A universal photoelectrochemical biosensor for dual microRNA detection based on two CdTe nanocomposites

A universal photoelectrochemical biosensor for dual microRNA detection has been successfully developed.

An electrochemical sensor for attomolar determination of mercury(II) using DNA/poly-L-methionine-gold nanoparticles/pencil graphite electrode

The present work describes an ultrasensitive electrochemical sensor for determination of mercury(II) using deoxyribonucleic acid/poly-L-methionine-gold nanoparticles/pencil graphite electrode (DNA/PMET-AuNPs/PGE). To fabricate this biosensor, L-methionine (L-MET) was electropolymerized on the PGE surface followed by simultaneous electrochemical entrapment of AuNPs. Next, DNA was immobilized on the PMET-AuNPs/PGE by applying a 0.5 V potential. The surface area of modified and unmodified electrodes was determined by chronocoulometric technique. Hg²⁺ was detected in the linear dynamic range of 0.1 aM to 0.1 nM, and the detection limit was determined as 0.004 aM using square wave anodic stripping voltammetry (SWASV) under optimized conditions. The DNA/PMET-AuNPs/PGE demonstrated good selectivity toward Hg²⁺ against other metal ions such as V⁴⁺, Pb²⁺, Cr³⁺, Cd²⁺, Cu²⁺, Zn²⁺, Sn²⁺, In³⁺, Ge⁴⁺, and Fe³⁺. Real samples studies were carried out in sea water and fish samples.

A colorimetric paper sensor for visual detection of mercury ions constructed with dual-emission carbon dots

A ratiometric fluorescence nanosensor has been developed by mixing blue fluorescent carbon dots and red fluorescent carbon dots, where the blue fluorescence can be selectively quenched by Hg²⁺, while the red fluorescence is an internal reference.

Label-free electrochemiluminescence assay for aqueous Hg2+ through oligonucleotide mediated assembly of gold nanoparticles

Development of ultrasensitive method for Hg²⁺ analysis is important for human health protection and environment monitoring. In this work, we present a highly sensitive and selective electrochemiluminescence (ECL) assay in a "turn-on" mode for the detection of Hg²⁺ through selective assembly of gold nanoparticles (AuNPs) on the surface of indium tin oxide (ITO) electrode. In the absence of Hg²⁺, the nonthiolated ssDNA could protected AuNPs against its assembly on ITO surface, producing rather low ECL emission for Ru(bpy)₃²⁺/TPA system. Conversely, binding of Hg²⁺ with the Hg²⁺-specific oligonucleotide through thymine-Hg²⁺-thymine coordination formed the double-stranded structure, which could not effectively adsorb to AuNPs in solution. The assembly of free-state AuNPs is achieved, which well preserves electronical conductivity. The presence of AuNPs can catalyze the electro-oxidation of TPA, producing significantly enhanced ECL signal. Through detecting the ECL signal mediated by assembly of AuNPs, the proposed method was able to ensure substantial signal amplification and a low background. It was demonstrated that the ECL intensity was correlated with the ssDNA-based recognition reaction, enabling quantitative analysis of Hg²⁺ over the range of 8pM to 2nM, with a detection limit of 2pM. ECL intensity of the system were extremely specific for Hg²⁺ even in the presence of 1000-fold higher concentrations of other metal ions. Analytical results of Hg²⁺ spiked into water samples by the proposed ECL method were in good agreement with that obtained by atomic fluorescent spectrometry or mass spectrometry data.

Highly effective target converting strategy for ultrasensitive electrochemical assay of Hg2+

An electrochemical sensing system based on a highly effective Hg²⁺ converting strategy and RCA has been developed for the ultrasensitive detection of Hg²⁺.

Fabrication of 4-aminophenol sensor based on hydrothermally prepared ZnO/Yb2O3nanosheets

A facile hydrothermal process was used to prepare nanostructures of ZnO/Yb₂O₃in alkaline medium, which were applied for efficient chemical sensor development. The sensor fabricated with ZnO/Yb₂O₃nanostructures may be a promising sensitive chemical sensor for the effective detection of environmental effluents.

Photoelectrochemical detection of metal ions

Depending on the situation, metal ions may either play beneficial roles or be harmful to human health and ecosystems. Sensitive and accurate detection of metal ions is thus a critical issue in the field of analytical sciences and great efforts have been devoted to the development of various metal ion sensors. Photoelectrochemical (PEC) detection is an emerging technique for the bio/chemical detection of metal ions, and features a fast response, low cost and high sensitivity. Using representative examples, this review will first introduce the fundamentals and summarize recent progress in the PEC detection of metal ions. In addition, interesting strategies for the design of particular PEC metal ion sensors are discussed. Challenges and opportunities in this field are also presented.

Recent advances in carbon-based dots for electroanalysis

Graphene quantum dots (GQDs) and carbon quantum dots (CQDs) demonstrate unique properties in the electroanalysis field, including electroresistance, electrochemiluminescence, electrochemical and photoelectrochemical sensors.

Microwave-assisted sonochemical synthesis of Cu and Mn doped GSH–ZnS polypeptide quantum dots and their enhanced photoelectrochemical properties

The GSH–Cu_xMn_yZnS were prepared by a facile microwave-assisted sonochemical synthesis approach. The enhanced PEC property of Cu and Mn doped GSH–ZnS was proved by photoelectrochemical experiments.

Ruthenium(ii) complexes with dppz: from molecular photoswitch to biological applications

The present article describes the recent advances in biological applications of the Ru-dppz systems in DNA binding, cellular imaging, anticancer drugs, phototherapy, protein aggregation detecting and chemosensors.

A dual-channel detection of mercuric ions using a label free G-quadruplex-based DNAzyme molecule

We have constructed a ‘turn-off’ and label free bio-sensor using a DNAzyme molecule.

Functional nucleic acid-based sensors for heavy metal ion assays

Heavy metal contaminants such as lead ions (Pb(2+)), mercury ions (Hg(2+)) and silver ions (Ag(+)) can cause significant harm to humans and generate enduring bioaccumulation in ecological systems. Even though a variety of methods have been developed for Pb(2+), Hg(2+) and Ag(+) assays, most of them are usually laborious and time-consuming with poor sensitivity. Due to their unique advantages of excellent catalytic properties and high affinity for heavy metal ions, functional nucleic acids such as DNAzymes and aptamers show great promise in the development of novel sensors for heavy metal ion assays. In this review, we summarize the development of functional nucleic acid-based sensors for the detection of Pb(2+), Hg(2+) and Ag(+), and especially focus on two categories including the direct assay and the amplification-based assay. We highlight the emerging trends in the development of sensitive and selective sensors for heavy metal ion assays as well.

N-doped TiO2 based visible light activated label-free photoelectrochemical biosensor for detection of Hg(2+) through quenching of photogenerated electrons

A novel photoelectrochemical (PEC) biosensor was fabricated based on N-doped TiO2 for the detection of Hg(2+) through the quenching of photogenerated electrons. The N-doped TiO2 was synthesized by a sol-gel method with urea and tetrabutyl titanate as the N and Ti sources. Compared with the undoped TiO2, the N-doped TiO2 showed an enhanced photocurrent response under visible light (λ > 420 nm). The sensing surface was functionalized with 5'-amino-modified T-rich oligonucleotides. The photoelectrochemical biosensor bound Hg(2+) on the surface by a highly specific T-Hg(2+)-T recognition. Hg(2+) on the surface of the N-doped TiO2 film withdrew the photogenerated electrons and decreased the recorded current signal. The dynamic linear range for Hg(2+) has been determined to be as low as 2-6 μM.

A facile and sensitive electrochemiluminescence biosensor for Hg2+ analysis based on a dual-function oligonucleotide probe

In this study, a sensitive electrochemiluminescent (ECL) biosensor for the detection of Hg(2+) was easily prepared by self-assembling mercury-specific oligonucleotide on the surface of gold nanoparticles (AuNPs) modified indium tin oxide (ITO) electrode. A conformation change of the oligonucleotide from linear chain to hairpin occurs upon the binding of Hg(2+) through thymine-Hg(2+)-thymine coordination. The dual-function oligonucleotide serves as the probe to Hg(2+) but also a carrier of signal-generating molecules, [Ru(bpy)2(dppz)](BF4)2. It was estimated that one oligonucleotide was able to load with eight ECL signal molecules; a ratio of four or five oligonucleotides per gold nanoparticle was obtained basing on the calculation with surface density. Without tedious multiple-labeling procedures and special modification of oligonucleotide probe for signal transduction/amplification, a detection limit of 5.1 pM Hg(2+) was outstanding from the interference of other ten metal ions. Results of spiked water samples were in good agreement with that obtained by atomic fluorescent spectrometry.

An exonuclease-assisted amplification electrochemical aptasensor for Hg(2+) detection based on hybridization chain reaction

In this work, a novel electrochemical aptasensor was developed for Hg(2+) detection based on exonuclease-assisted target recycling and hybridization chain reaction (HCR) dual signal amplification strategy. The presence of Hg(2+) induced the T-rich DNA partly folded into duplex-like structure via the Hg(2+) mediated T-Hg(2+)-T base pairs, which triggered the activity of exonuclease III (Exo III). Exo III selectively digested the double-strand DNA containing multiple T-Hg(2+)-T base pairs from its 3'-end, the released Hg(2+) participated analyte recycle. With each digestion cycle, a digestion product named as help DNA was obtained, which acted as a linkage between the capture DNA and auxiliary DNA. The presence of help DNA and two auxiliary DNA collectively facilitated successful HCR process and formed long double-stranded DNA. [Ru(NH3)6](3+) was used as redox indicator, which electrostatically bound to the double strands and produced an electrochemical signal. Exo III-assisted target recycling and HCR dual amplification significantly improved the sensitivity for Hg(2+) with a detection limit of 0.12 pM (S/N=3). Furthermore, the proposed aptasensor had a promising potential for the application of Hg(2+) detection in real aquatic sample analysis.

Facile synthesis of fluorescent polyaniline microspheres and their use for the detection of mercury ions

Bright blue fluorescent polyaniline microspheres were prepared by a simple controlled oxidation under mild conditions. A simple, highly sensitive fluorometric Hg²⁺ probe has been constructed.

Facile synthesis of polyaniline/carbon dot nanocomposites and their application as a fluorescent probe to detect mercury

Novel polyaniline/carbon dot nanocomposites have been synthesized using a simple method, and a PANI/Cdot “off–on” fluorescent probe has been constructed for the simple, ultrasensitive and selective detection of Hg²⁺ in aqueous media.

Visual detection of mercury(ii) based on recognition of the G-quadruplex conformational transition by a cyanine dye supramolecule

Visual detection of mercury(ii) based on recognition of the G-quadruplex conformational transition by a cyanine dye supramolecule is reported.

Photoelectrochemical aptasensing of kanamycin using visible light-activated carbon nitride and graphene oxide nanocomposites

Photoactive material and recognition element are two crucial factors which determine the sensitivity and selectivity of the photoelectrochemical (PEC) sensor. Herein we developed a novel PEC aptamer sensor for the specific detection of kanamycin using water-dispersible graphite-like carbon nitride (w-g-C3N4) as visible light-active material and aptamer as the biorecognition element. While a suitable amount of graphene oxide (GO) was doped in w-g-C3N4, the visible light photocurrent response was enhanced, which was beneficial to the construction of PEC sensor. On the other hand, the large specific surface area and π-conjugated structure of GO/w-g-C3N4 provided an excellent platform for immobilizing the kanamycin-binding DNA aptamer on the surface of the sensor via π-π stacking interaction. On such a sensor, the capture of kanamycin molecules by aptamer resulted in increased photocurrent. The PEC response of the sensor was found to be linearly proportional to the concentration of kanamycin in the range from 1 nM to 230 nM with a detection limit (3S/N) of 0.2 nM. Moreover, the proposed sensor displayed high selectivity, good reproducibility, and high stability, demonstrating the successful combination of GO/w-g-C3N4 with aptamer in fabricating high performance PEC sensors.