Dual on–off and off–on switchable oligoaziridine biosensor

Configuration of super-fast Cu2+-responsive chemosensor by attaching diaminomaleonitrile to BODIPY scaffold for high-contrast fluorescence imaging of living cells

A highly fluorescent Cu2+-responsive sensor, 2-amino-3-(BODIPYmethyleneamino)maleonitrile (BD) was constructed by attaching diaminomaleonitrile to a BODIPY scaffold. Cu2+ can be selectively recognized on a 2-s time-scale by way of fluorescence emission. When Cu2+ and BD coexist in solution, typical BODIPY emission was observed and the emission intensity could be increased to 334 times that of the blank dye solution. The mechanism of fluorescence increase is based on the generation of highly fluorescent species by Cu2+-triggered oxidative cyclization of the attached diaminomaleonitrile. The absolute fluorescence quantum yield (AFQY) of the cyclization product is 98% determined by integrating sphere. The highly emissive character can be attributed to the imidazole ring and dicarbonitrile on the BODIPY scaffold. It surpasses the meso-phenyl substituted analogue in AFQY and detection limits (DL). The specific Cu2+ recognition behavior was also validated in Hela cells with high-contrast fluorescence images.

Voltage-Switchable Biosensor with Gold Nanoparticles on TiO2 Nanotubes Decorated with CdS Quantum Dots for the Detection of Cholesterol and H2O2

A thin layer of gold nanoparticles (Au NPs) sputtered on cadmium sulfide quantum dots (CdS QDs) decorated anodic titanium dioxide nanotubes (TNTs) (Au/CdS QDs/TNTs) was fabricated and explored for the nonenzymatic detection of cholesterol and hydrogen peroxide (H₂O₂). Morphological studies of the sensor revealed the formation of uniform nanotubes decorated with a homogeneously dispersed CdS QDs and Au NPs layer. The electrochemical measurements showed an enhanced electrocatalytic performance with a fast electron transfer (∼2 s) between the redox centers of each analyte and electrode surface. The hybrid nanostructure (Au/CdS QDs/TNTs) electrode exhibited about a 6-fold increase in sensitivity for both cholesterol (10,790 μA mM^-1 cm^-2) and H₂O₂ (78,833 μA mM^-1 cm^-2) in analyses compared to the pristine samples. The hybrid electrode utilized different operational potentials for both analytes, which may lead to a voltage-switchable dual-analyte biosensor with a higher selectivity. The biosensor also demonstrated a good reproducibility, thermal stability, and increased shelf life. In addition, the clinical significance of the biosensor was tested for cholesterol and H₂O₂ in real blood samples, which showed maximum relative standard deviations of 1.8 and 2.3%, respectively. These results indicate that a Au/CdS QDs/TNTs-based hybrid nanostructure is a promising choice for an enzyme-free biosensor due to its suitable band gap alignment and higher electrocatalytic activities.

A diaminomaleonitrile-appended BODIPY chemosensor for the selective detection of Cu2+ via oxidative cyclization and imaging in SiHa cells and zebrafish

A specific Cu²⁺ sensor, 2-amino-3-(BODIPYmethyleneamino)maleonitrile (BDM), was established by a simple dehydration between BODIPY and diaminomaleonitrile. Cu²⁺ could be recognized by BDM over other competing metal ions in acetonitrile with distinct fluorescence emission signal response. Upon the addition of Cu²⁺ to BDM in acetonitrile, the maximum absorption at approximately 530 nm on the longer wavelength side was quenched, and the emission at 530 nm was ignited simultaneously. The fluorescence intensity enhancement could reach a maximum of 204 times the intensity of the BDM blank solution. The fluorescence "off-on" effect is established according to the Cu²⁺-induced fast intramolecular oxidative cyclization reaction, which could be deduced from the formation of an imidazole ring appended to the cyclization product (2-BODIPY-1H-imidazole-4,5-dicarbonitrile, BMC). Single-crystal structure analysis of the sensor BDM and cyclization product BMC further demonstrated this oxidative cyclization. Finally, the Cu²⁺ recognition property of BDM was validated in SiHa cells and living zebrafish. Additionally, the blood-brain barrier of the zebrafish can be penetrated by the BDM dye and the neuron cells in the brain were stained.

Biosensors for Sustainable Food Engineering: Challenges and Perspectives

Current food production faces tremendous challenges from growing human population, maintaining clean resources and food qualities, and protecting climate and environment. Food sustainability is mostly a cooperative effort resulting in technology development supported by both governments and enterprises. Multiple attempts have been promoted in tackling challenges and enhancing drivers in food production. Biosensors and biosensing technologies with their applications, are being widely applied to tackling top challenges in food production and its sustainability. Consequently, a growing demand in biosensing technologies exists in food sustainability. Microfluidics represents a technological system integrating multiple technologies. Nanomaterials, with its technology in biosensing, is thought to be the most promising tool in dealing with health, energy, and environmental issues closely related to world populations. The demand of point of care (POC) technologies in this area focus on rapid, simple, accurate, portable, and low-cost analytical instruments. This review provides current viewpoints from the literature on biosensing in food production, food processing, safety and security, food packaging and supply chain, food waste processing, food quality assurance, and food engineering. The current understanding of progress, solution, and future challenges, as well as the commercialization of biosensors are summarized.

Semi-Interpenetrating Polymer Networks with Predefined Architecture for Metal Ion Fluorescence Monitoring

The development of new synthetic approaches for the preparation of efficient 3D luminescent chemosensors for transition metal ions receives considerable attention nowadays, owing to the key role of the latter as elements in biological systems and their harmful environmental effects when present in aquatic media. In this work, we describe an easy and versatile synthetic methodology that leads to the generation of nonconjugated 3D luminescent semi-interpenetrating amphiphilic networks (semi-IPN) with structure-defined characteristics. More precisely, the synthesis involves the encapsulation of well-defined poly(9-anthrylmethyl methacrylate) (pAnMMA) (hydrophobic, luminescent) linear polymer chains within a covalent poly(2-(dimethylamino)ethyl methacrylate) (pDMAEMA) hydrophilic polymer network, derived via the 1,2-bis-(2-iodoethoxy)ethane (BIEE)-induced crosslinking process of well-defined pDMAEMA linear chains. Characterization of their fluorescence properties demonstrated that these materials act as strong blue emitters when exposed to UV irradiation. This, combined with the presence of the metal-binding tertiary amino functionalities of the pDMAEMA segments, allowed for their applicability as sorbents and fluorescence chemosensors for transition metal ions (Fe3+, Cu2+) in solution via a chelation-enhanced fluorescence-quenching effect promoted within the semi-IPN network architecture. Ethylenediaminetetraacetic acid (EDTA)-induced metal ion desorption and thus material recyclability has been also demonstrated.

Nanogold POxylation: towards always-on fluorescent lung cancer targeting

Gold nanoparticles (GNPs) were POxylated with fluorescent oligomers, synthesized in supercritical CO₂, and conjugated with a laminin fragment. Particle design strongly impacts on probes uptake by the A549 cell line.

Design of oligoaziridine-PEG coatings for efficient nanogold cellular biotagging

Biocompatible oligoaziridine-PEG coated gold nanoparticles overcome self-quenching while targeting the cell nucleus. The course of gold biotags within the cell's environment was tracked through confocal laser microscopy.

A novel dual-emission ratiometric fluorescent nanoprobe for sensing and intracellular imaging of Zn2+

The integration of unique characteristics of nanomaterials with highly specific recognition elements, such as biomolecules and organic molecules, are the foundation of many novel nanoprobes for bio/chemical sensing and imaging. In the present report, branched polyethylenimine (PEI) was grafted with 8-chloroacetyl-aminoquinoline to synthesize a water-soluble and biocompatible quinoline-based Zn(2+) probe PEIQ. Then the PEIQ was covalently conjugated to [Ru(bpy)3](2+)-encapsulated SiNPs to obtain the ratiometric fluorescence nanoprobe which exhibits a strong fluorescence emission at 600 nm and a negligible fluorescence emission at 500 nm in the absence of Zn(2+) upon a single wavelength excitation. After the addition of different amounts of Zn(2+), the fluorescence intensity at 500 nm increased continuously while the fluorescence intensity at 600 nm remained stable, thus changing the dual emission intensity ratios and displaying continuous color changes from red to green which can be clearly observed by the naked eye. The nanoprobe exhibits good water dispersivity, biocompatibility and cell permeability, high selectivity over competing metal ions, and high sensitivity with a detection limit as low as 0.5 μM. Real-time imaging of Zn(2+) in A549 cells has also been realized using this novel nanoprobe.