A novel photoelectrochemical sensor based on PPIX-functionalized WO3–rGO nanohybrid-decorated ITO electrode for detecting cysteine

Infiltrating Perfluorocarbon Nanoemulsion and Sensitizing Ultrasound Cavitation to Eradicate Biofilms

Developing strategies for the treatment of bacterial biofilms is challenging due to their complex and resilient structure, low permeability to therapeutics, and ability to protect resident pathogens. Herein, we demonstrate that a polylysine-stabilized perfluorocarbon nanoemulsion is favored for penetrating biofilms and sensitizing the cavitation effect of low-intensity ultrasound, resulting in the dispersal of extracellular polymeric substances and killing of the protected cells. Through experiments, we observed a complete penetration of the nanoemulsion in a 40 μm Pseudomonas aeruginosa biofilm and demonstrated that it was induced by the fluidic perfluorocarbon, possibly attributing to its low surface tension. Furthermore, we presented an almost complete antibiofilm effect with a low-intensity ultrasound (1 MHz, 0.75 W/cm2, 5 min) in diverse cases, including cultured biofilms, colonized urinary catheters, and chronic wounds. During the treatment process, the perfluorocarbon phase enhanced the number and imploding energy of ultrasound cavities, thoroughly divided the biofilm structure, prevented biofilm self-healing, and sterilized the resident pathogens. Thus, the penetration and sensitization of the nanoemulsion might serve as a facile and potent strategy for eradicating biofilms in various applications.

Nano-Emulsified Perfluorooctyl Bromide Can Infiltrate Gram-Negative Bacteria and Sensitize Them to Ultrasound

Gram-negative (G-) bacterial infections remain one of the most urgent global health threats, because the distinctive envelope structure hinders the penetration of therapeutics. Here, we showed that a perfluorooctyl bromide nanoemulsion (PFOB NE) uniquely interacts with G- bacteria. After cell envelope attachment, the PFOB can infiltrate the cell and was diffused throughout. In this process, it impaired the membranes by disintegrating phospholipid molecules, enhancing the consequent ultrasonic cavitation to break the envelope. We identified through ultrasound that the NE had remarkable bactericidal effects against various antibiotic-resistant pathogens. Using in situ sterilization, this approach accelerated the recovery of bacteria-infected murine skin wounds. Thus, combining PFOB and ultrasound might be an alternative tool for conquering the growing threat of G- pathogens.

Ultrathin Covalent Organic Framework Nanosheets/Ti3C2Tx-Based Photoelectrochemical Biosensor for Efficient Detection of Prostate-Specific Antigen

Designable and ultrathin covalent organic framework nanosheets (CONs) with good photoelectric activity are promising candidates for the construction of photoelectrochemical (PEC) biosensors for the detection of low-abundance biological substrates. However, achieving highly sensitive PEC properties by using emerging covalent organic framework nanosheets (CONs) remains a great challenge due to the polymeric nature and poor photoelectric activity of CONs. Herein, we report for the first time the preparation of novel composites and their PEC sensing properties by electrostatic self-assembly of ultrathin CONs (called TTPA-CONs) with Ti₃C₂T_x. The prepared TTPA-CONs/Ti₃C₂T_x composites can be used as photocathodes for PEC detection of prostate-specific antigen (PSA) with high sensitivity, low detection limit, and good stability. This work not only expands the application of CONs but also opens new avenues for the development of efficient PEC sensing platforms.

Label-Free Sensing of Cysteine through Cadmium Ion Coordination: Smartphone-Based Electrochemical Detection

The detection of biologically important compounds such as cysteine remains a challenge for monitoring body metabolism. This work proposes a transition metal ion coordination-based label-free cysteine sensor with smartphone-based square wave voltammetry sensing system for the point-of-care testing (POCT). In the sensing system, potential excitation and current measurements were accomplished by a miniaturized and integrated circuit board with a smartphone to wirelessly control the system via Bluetooth. The electrochemical currents changed with the cysteine concentrations ranging from 0 μM to 200 μM with a linearity correlation coefficient of 0.9915. The limit of detection was as low as 0.0149 μM for cysteine. The smartphone-based system provides an effective strategy for cysteine detection, and it can also serve as a promising portable sensing platform for the analysis of other small molecules.

Au nanoclusters-decorated WO3 nanorods for ultrasensitive photoelectrochemical sensing of Hg2+

Ultrasensitive photoelectrochemical sensing of Hg2+ is achieved using Au nanocluster-decorated WO3 nanorods as photoactive materials.

Electrochemical Amino Acid Sensing: A Review on Challenges and Achievements

The rapid growth of research in electrochemistry in the last decade has resulted in a significant advancement in exploiting electrochemical strategies for assessing biological substances. Among these, amino acids are of utmost interest due to their key role in human health. Indeed, an unbalanced amino acid level is the origin of several metabolic and genetic diseases, which has led to a great need for effective and reliable evaluation methods. This review is an effort to summarize and present both challenges and achievements in electrochemical amino acid sensing from the last decade (from 2010 onwards) to show where limitations and advantages stem from. In this review, we place special emphasis on five well-known electroactive amino acids, namely cysteine, tyrosine, tryptophan, methionine and histidine. The recent research and achievements in this area and significant performance metrics of the proposed electrochemical sensors, including the limit of detection, sensitivity, stability, linear dynamic range(s) and applicability in real sample analysis, are summarized and presented in separate sections. More than 400 recent scientific studies were included in this review to portray a rich set of ideas and exemplify the capabilities of the electrochemical strategies to detect these essential biomolecules at trace and even ultra-trace levels. Finally, we discuss, in the last section, the remaining issues and the opportunities to push the boundaries of our knowledge in amino acid electrochemistry even further.

Design and synthesis of a novel "turn-on" long range measuring fluorescent probe for monitoring endogenous cysteine in living cells and Caenorhabditis elegans

Cysteine (Cys) is an indispensable small organic molecule containing sulfhydryl groups, which has essential regulatory effects on the physiological process of human body. In this work, a red emission fluorescent probe TCFQ-Cys was designed and exploited based on 2-(3-cyano-4,5,5-trimethylfuran-2(5H)-ylidene) malononitrile-derivatives. The probe could effectively monitor Cys through the typical acrylate cleavage. The detecting system showed a red emission at 633 nm and the fluorescence was stable within the pH range of 6-9. The detection could be completed in 30 min. TCFQ-Cys presented high sensitivity with a detection limit of 0.133 μM and high selectivity towards Cys from other biological mercaptans. The most important feature was that the system had a wide linear range of 0-300 μM, which covered the physiological requirements of Cys detection. Subsequently, we conducted the biological imaging of Cys in MCF-7 cells and Caenorhabditis elegans (C. elegans). Therefore, TCFQ-Cys had a practical application prospect for further investigating the physiological function of Cys.

Visible light-driven photoelectrochemical ampicillin aptasensor based on an artificial Z-scheme constructed from Ru(bpy)32+-sensitized BiOI microspheres

Dye sensitization is an alternative strategy to improve photoelectric activity of semiconductors and, particularly, to enhance the activity towards visible light domain. Herein, an artificial Z-scheme bipyridine ruthenium (Ru(bpy)32+) sensitizing narrow-gap bismuth oxy-iodide (BiOI) microspheres was constructed by a simple electrostatic interaction strategy for the first time. The electrochemical impedance spectroscopy (EIS) and photoluminescence (PL) analysis showed that this design of such Z-scheme structure was helpful to enhance the interfacial charge transfer and improve the photoelectric conversion efficiency. In addition, due to the sensitization of Ru(bpy)32+, the band gap was narrowed from 1.8 eV of BiOI microspheres to 1.3 eV of BiOI/Ru(bpy)32+ microspheres, leading to improve the utilization of visible light. So that, the photocurrent of the resulted BiOI/Ru(bpy)32+ was 13.0 times that of pure BiOI microspheres. In view of the outstanding photoelectrochemical (PEC) performance of BiOI/Ru(bpy)32+ and the high specificity of the aptamer, the PEC aptasensor for ampicillin (AMP) merits the excellent detection performance including a broad linear ranging from 1 × 10-7 nM to 100 nM as well as a low detection limit of 3.3 × 10-8 nM (S/N = 3). This work not only provides a novel way to construct and design highly efficient photoactive materials for PEC detection, but also broadens the application of Z-scheme in the field of sensing.

Ultrasound and Near-Infrared Light Dual-Triggered Upconversion Zeolite-Based Nanocomposite for Hyperthermia-Enhanced Multimodal Melanoma Therapy via a Precise Apoptotic Mechanism

High reactive oxygen species (ROS) generation efficiency and induction of targeted cell apoptosis are recognized as key objectives to achieve a highly efficient strategy for cancer therapy with minimum side effects of inflammatory reactions. However, it is still a challenge to realize higher therapeutic efficiency with a cell apoptosis model. Herein, we present strong upconversion luminescent biosafe cores derived from Linde Type A (LTA) zeolites and modification with targeted/therapeutic drugs for multimodal therapy, in which sonodynamic therapy (SDT) combined with photodynamic therapy (PDT) increases therapeutic efficiency especially in deep sites of tumor via producing cytoplasmic ROS and mitochondrial superoxide and photothermal therapy (PTT) enhances PDT effects via higher fluorescence resonance energy transfer (FRET) efficacy attributed to an increased temperature. Furthermore, the transcriptomic analysis reveals that cellular internalization of the nanosystem can lead to tumor ablation via cell apoptosis. We expect that the multimodal therapy based on LTA zeolite drug nanocarriers could be applied in the cancer therapeutics in the near future.

Arginine-Induced Self-Assembly of Protoporphyrin to Obtain Effective Photocatalysts in Aqueous Media Under Visible Light

The fabrication of controlled supramolecular nanostructures via self-assembly of protoporphyrin IX (PPIX) was studied with enantiomerically pure l-arginine and d-arginine, and we have shown that stoichiometry controlled the morphology formed. The nanostructure morphology was mainly influenced by the delicate balance of π-π stacking interactions between PPIX cores, as well as H-bonding between the deprotonated acidic head group of PPIX with the guanidine head group of arginine. PPIX self-assembled with l-/d-arginine to create rose-like nanoflower structures for four equivalents of arginine that were 5–10 μm in length and 1–4 μm diameter. We employed UV-vis, fluorescence spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), dynamic light scattering (DLS) and Fourier transform infrared spectroscopy (FT-IR) techniques to characterize the resulting self-assembled nanostructures. Furthermore, we investigated the catalytic activity of PPIX and arginine co-assembled materials. The fabricated PPIX–arginine nanostructure showed high enhancement of photocatalytic activity through degradation of rhodamine B (RhB) with a decrease in dye concentration of around 78–80% under simulated visible radiation.

Self-enhanced photocathodic matrix based on poly-dopamine sensitized TiO2 mesocrystals for mycotoxin detection assisted by a dual amplificatory nanotag

A new photoelectrochemical sensor for zearalenone detection was established based on a self-enhanced photocathodic matrix coupled with ordered mesoporous Co₃O₄.

Fabrication of photo-electrochemical biosensors for ultrasensitive screening of mono-bioactive molecules: the effect of geometrical structures and crystal surfaces

The controlled design of hierarchical CN-ST flowers is a key feature for creating biosensor surface electrodes for photo-electrochemical, ultrasensitive screening of mono-bioactive molecules.

Porphyrinoids for Chemical Sensor Applications

Porphyrins and related macrocycles have been intensively exploited as sensing materials in chemical sensors, since in these devices they mimic most of their biological functions, such as reversible binding, catalytic activation, and optical changes. Such a magnificent bouquet of properties allows applying porphyrin derivatives to different transducers, ranging from nanogravimetric to optical devices, also enabling the realization of multifunctional chemical sensors, in which multiple transduction mechanisms are applied to the same sensing layer. Potential applications are further expanded through sensor arrays, where cross-selective sensing layers can be applied for the analysis of complex chemical matrices. The possibility of finely tuning the macrocycle properties by synthetic modification of the different components of the porphyrin ring, such as peripheral substituents, molecular skeleton, coordinated metal, allows creating a vast library of porphyrinoid-based sensing layers. From among these, one can select optimal arrays for a particular application. This feature is particularly suitable for sensor array applications, where cross-selective receptors are required. This Review briefly describes chemical sensor principles. The main part of the Review is divided into two sections, describing the porphyrin-based devices devoted to the detection of gaseous or liquid samples, according to the corresponding transduction mechanism. Although most devices are based on porphyrin derivatives, seminal examples of the application of corroles or other porphyrin analogues are evidenced in dedicated sections.

Cadmium Sulphide-Reduced Graphene Oxide-Modified Photoelectrode-Based Photoelectrochemical Sensing Platform for Copper(II) Ions

A photoelectrochemical (PEC) sensor with excellent sensitivity and detection toward copper (II) ions (Cu²⁺) was developed using a cadmium sulphide-reduced graphene oxide (CdS-rGO) nanocomposite on an indium tin oxide (ITO) surface, with triethanolamine (TEA) used as the sacrificial electron donor. The CdS nanoparticles were initially synthesized via the aerosol-assisted chemical vapor deposition (AACVD) method using cadmium acetate and thiourea as the precursors to Cd²⁺ and S^2-, respectively. Graphene oxide (GO) was then dip-coated onto the CdS electrode and sintered under an argon gas flow (50 mL/min) for the reduction process. The nanostructured CdS was adhered securely to the ITO by a continuous network of rGO that also acted as an avenue to intensify the transfer of electrons from the conduction band of CdS. The photoelectrochemical results indicated that the ITO/CdS-rGO photoelectrode could facilitate broad UV-visible light absorption, which would lead to a higher and steady-state photocurrent response in the presence of TEA in 0.1 M KCl. The photocurrent decreased with an increase in the concentration of Cu²⁺ ions. The photoelectrode response for Cu²⁺ ion detection had a linear range of 0.5–120 μM, with a limit of detection (LoD) of 16 nM. The proposed PEC sensor displayed ultra-sensitivity and good selectivity toward Cu²⁺ ion detection.

Sensitive Electrochemical Immunosensor for Detection of Nuclear Matrix Protein-22 based on NH2-SAPO-34 Supported Pd/Co Nanoparticles

A novel sandwich-type electrochemical immunosensor using the new amino group functionalized silicoaluminophosphates molecular sieves (NH₂-SAPO-34) supported Pd/Co nanoparticles (NH₂-SAPO-34-Pd/Co NPs) as labels for the detection of bladder cancer biomarker nuclear matrix protein-22 (NMP-22) was developed in this work. The reduced graphene oxide-NH (rGO-NH) with good conductivity and large surface area was used to immobilize primary antibody (Ab₁). Due to the excellent catalytic activity toward hydrogen peroxide, NH₂-SAPO-34-Pd/Co NPs were used as labels and immobilized secondary antibody (Ab₂) through adsorption capacity of Pd/Co NPs to protein. The immunosensor displayed a wide linear range (0.001–20 ng/mL) and low detection limit (0.33 pg/mL). Good reproducibility and stability have showed satisfying results in the analysis of clinical urine samples. This novel and ultrasensitive immunosensor may have the potential application in the detection of different tumor markers.

A Cathodic "Signal-off" Photoelectrochemical Aptasensor for Ultrasensitive and Selective Detection of Oxytetracycline

A novel cathodic "signal-off" strategy was proposed for photoelectrochemical (PEC) aptasensing of oxytetracycline (OTC). The PEC sensor was constructed by employing a p-type semiconductor BiOI doped with graphene (G) as photoactive species and OTC-binding aptamer as a recognition element. The morphological structure and crystalline phases of obtained BiOI-G nanocomposites were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The UV-visible absorption spectroscopic analysis indicated that doping of BiOI with graphene improved the absorption of materials in the visible light region. Moreover, graphene could facilitate the electron transfer of BiOI modified electrode. As a result, the cathodic photocurrent response of BiOI under visible light irradiation was significantly promoted when a suitable amount of graphene was doped. When amine-functionalized OTC-binding aptamer was immobilized on the BiOI-G modified electrode, a cathodic PEC aptasensor was fabricated, which exhibited a declined photocurrent response to OTC. Under the optimized conditions, the photocurrent response of aptamer/BiOI-G/FTO was linearly proportional to the concentration of OTC ranging from 4.0 to 150 nM, with a detection limit (3S/N) of 0.9 nM. This novel PEC sensing strategy demonstrated an ultrasensitive method for OTC detection with high selectivity and good stability.

A highly selective photoelectrochemical biosensor for uric acid based on core-shell Fe3O4@C nanoparticle and molecularly imprinted TiO2

Combining the surface modification and molecular imprinting technique, a novel photoelectrochemical sensing platform with excellent photochemical catalysis and molecular recognition capabilities was established for the detection of uric acid based on the magnetic immobilization of Fe3O4@C nanoparticles onto magnetic glassy carbon electrode (MGCE) and modification of molecularly imprinted TiO2 film on Fe3O4@C. The developed biosensor was highly sensitive to uric acid in solutions, with a linear range from 0.3 to 34µM and a limit of detection of 0.02μM. Furthermore, the biosensor exhibited outstanding selectivity while used in coexisting systems containing various interferents with high concentration. The practical application of the biosensor was also realized for the selective detection of uric acid in spiked samples. The study made a successful attempt in the development of highly selective and sensitive photoelectrochemical biosensor for urine monitoring.

An electrochemical immunosensor for ultrasensitive detection of carbohydrate antigen 199 based on Au@Cu(x)OS yolk-shell nanostructures with porous shells as labels

A novel and sensitive electrochemical immunosensor for ultrasensitive detection of pancreatic cancer biomarker carbohydrate antigen 199 (CA199) was proposed by using Au@Cu(x)OS yolk-shell nanostructures with porous shells as labels for signal amplification. Au@Cu(x)OS yolk-shell nanostructures exhibit high electrocatalytic activity toward the reduction of hydrogen peroxide (H2O2) as analytical signal. Moreover, secondary antibody (Ab2) can adsorb on the surface of Au@Cu(x)OS with porous shells which has large surface area and could greatly increase the probability of Ab2-antigen interactions thereby leading to higher sensitivity. Reduced graphene oxide-tetraethylene pentamine (rGO-TEPA), containing abundant amine groups, was supported Au nanoparticles as a support platform to immobilize the primary antibody (Ab1). The resulting sensing interface of rGO-TEPA/AuNPs could provide a large electroconductive surface area, allowing high loadings of the biological recognition elements as well as the occurrence of electrocatalytic and electron-transfer processes. Under optimal conditions, the immunosensor exhibited a wide linear response to CA199 ranging from 0.001 to 12 U/mL with a low detection limit of 0.0005 U/mL. The designed immunosensor displayed good precision, high sensitivity, acceptable stability and reproducibility, and has been applied to the analysis of serum with satisfactory results. The proposed method provides a new promising platform of clinical immunoassay for other biomolecules.

Facile synthesis of Au-SnO2 hybrid nanospheres with enhanced photoelectrochemical biosensing performance

Au-SnO2 hybrid nanospheres (HNSs) were synthesized by a facile, one-step method, which was achieved via a redox reaction between the reductive stannous (II) ions and oxidative auric (III) ions and dissolved O2, and then in situ formation of Au nanoparticles (NPs) and SnO2 NPs. The results indicated that the Au NPs are able to trap electrons, improve the electron-hole pairs' life, and enhance the visible light absorption intensity that are all beneficial for enhancement of the visible light photoelectrochemical performance. Cysteine was chosen as a model molecule in photoelectrochemical biosensing experiments. The biosensor displayed excellent analytical performance for detection of cysteine with an extremely broad linear range (from 0.4 μM to 12 mM), and a low detection limit (0.1 μM). Therefore, the Au-SnO2 HNSs will be promising candidates for photocatalysts, photoelectrochemical biosensors, and other photoelectric devices.

In situ generated AgBr-enhanced ZnO nanorod-based photoelectrochemical aptasensing via layer-by-layer assembly

A robust aptasensor for Ag(+) was proposed for the first time using an enhanced ZnO nanorod-based photoelectrochemistry by in situ generated AgBr via layer-by-layer assembly. This work opens up new avenues for application of one-dimensional ZnO nanorod arrays in photoelectrochemical sensing. Additionally, the strategy of employing in situ generated narrow-bandgap semiconductors paves a new way for photoelectrochemical sensing.