Highly sensitive recognition of Pb2+ using Pb2+ triggered exonuclease aided DNA recycling

Recent Advances in the Application of Bionanosensors for the Analysis of Heavy Metals in Aquatic Environments

Heavy-metal ions (HMIs) as a pollutant, if not properly processed, used, and disposed of, will not only have an influence on the ecological environment but also pose significant health hazards to humans, making them a primary factor that endangers human health and harms the environment. Heavy metals come from a variety of sources, the most common of which are agriculture, industry, and sewerage. As a result, there is an urgent demand for portable, low-cost, and effective analytical tools. Bionanosensors have been rapidly developed in recent years due to their advantages of speed, mobility, and high sensitivity. To accomplish effective HMI pollution control, it is important not only to precisely pinpoint the source and content of pollution but also to perform real-time and speedy in situ detection of its composition. This study summarizes heavy-metal-ion (HMI) sensing research advances over the last five years (2019-2023), describing and analyzing major examples of electrochemical and optical bionanosensors for Hg2+, Cu2+, Pb2+, Cd2+, Cr6+, and Zn2+.

Exonuclease-based aptasensors: Promising for food safety and diagnostic aims

As of today's requirement, developing cost-effective smart sensing tools with ultrahigh sensitivity for food safety insurance is of special importance. For this purpose, aptamer-based biosensors (aptasensors) powered by the superiorities of the recycling signal amplification strategies have been expanded especially. Target recycling supported by enzymes is an appealing approach for implementing signal amplification. As the supreme biocatalyst enzymes, exonucleases can inaugurate signal improvement by involving a single target in a process would result in appreciable repeating cycles of the cleavage of the phosphodiester bonds between the building blocks of the nucleic acid strands, and also, their terminals. Although there are diverse substances for catalyzing amplification strategies, including nanoparticles, carbon-based nanocomposites, and quantum dots (QDs), exonucleases are of superiority over them by simplifying the amplification process with no need for the complicated pre-treatment processes. The outstanding selectivity and great sensitivity of the aptasensors tuned by amplification potency of exonucleases nominate them as the promising sensing tools for label-free, ease-of-use, cost-effective, and real-time diagnosis of diverse targets. Here, we summarize the achievements and perspectives in the scientific branch of aptasensor design for the qualitative monitoring of diverse targets by cooperation of exonucleases with the conspicuous potential for the signal amplification. Finally, some results are expressed to provide a comprehensive viewpoint for developing novel nuclease-based aptasensors in the future.

Recent advances in two-dimensional-material-based sensing technology toward health and environmental monitoring applications

Monitoring harmful and toxic chemicals, gases, microorganisms, and radiation has been a challenge to the scientific community for the betterment of human health and environment. Two-dimensional (2D)-material-based sensors are highly efficient and compatible with modern fabrication technology, which yield data that can be proficiently used for health and environmental monitoring. Graphene and its oxides, black phosphorus (BP), transition metal dichalcogenides (TMDCs), metal oxides, and other 2D nanomaterials have demonstrated properties that have been alluring for the manufacture of highly sensitive sensors due to their unique material properties arising from their inherent structures. This review summarizes the properties of 2D nanomaterials that can provide a platform to develop high-performance sensors. In this review, we have also discussed the advances made in the field of infrared photodetectors and electrochemical sensors and how the structural properties of 2D nanomaterials affect sensitivity and performance. Further, this review highlights 2D-nanomaterial-based electrochemical sensors that can be used to check for contaminations from heavy metals, organic/inorganic compounds, poisonous gases, pesticides, bacteria, antibiotics, etc., in water or air, which are severe risks to human wellbeing as well as the environment. Moreover, the limitations, future prospects, and challenges for the development of sensors based on 2D materials are also discussed for future advancements.

A highly sensitive and selective fluorescent probe without quencher for detection of Pb2+ ions based on aggregation-caused quenching phenomenon

Lead is a highly toxic heavy metal, and various functional nucleic acid (FNA)-based biosensors have been developed for the detection of Pb²⁺ in environmental monitoring. However, most fluorescence biosensors that have been reported were designed on the basis of a double-labeled (fluorophore and quencher group) DNA sequence, which not only involved an inconvenient organic synthesis but also restricted their wider use in practical applications. Here, we utilized a G-rich DNA sequence as a recognition probe and conjugated fluorene (CF) to develop a fluorescence sensor without a quencher based on the aggregation-caused quenching (ACQ) effect. In the presence of Pb²⁺, the degree of aggregation of CF was reduced because Pb²⁺ induced the formation of a G-quadruplex structure of the CF-DNA probe, and the fluorescence signal increased with the concentration of Pb²⁺ (0–1 μM), with a limit of detection of 0.36 nM. This fluorescent probe without a quencher enables the sensitive and selective detection of Pb²⁺. On the basis of these advantages, the CF-DNA probe represents a promising analytical method for detecting Pb²⁺.

Fluorescent probe with only a fluorophore but no quencher for detecting Pb²⁺ on the basis of the aggregation-caused quenching (ACQ) phenomenon.

A suspending-droplet mode paper-based microfluidic platform for low-cost, rapid, and convenient detection of lead(II) ions in liquid solution

A paper-based microfluidic device based on unconventional principle was developed and used to detect lead ions through a two-step process including heated incubation and subsequent mixing. The device was made by generating a superhydrophobic pattern, which defines channel and reservoir barriers, on a water-impermeable paper substrate, followed by loading and drying the reagents in the defined reservoirs. Different from the conventional paper-based devices that are made of water-permeable paper, the as-prepared device holds water drops in discrete reservoirs, and the water drops will not move unless the device is titled along the direction of the predefined channels. In this way, the liquid samples applied onto the device are handled as individual drops and could be stored, transported, and mixed on demand. Different from the conventional paper-based devices that use capillary force to drive liquid, our new device uses wetting and gravity as driving force. We name this operation principle suspending-droplet mode paper-based device (SD-μPAD). The use of a Teflon contact-printing stamp makes the production of such devices rapid, cost efficient, and mass productive. Utilizing a G-quadruplex-based luminescence switch-on assay, we demonstrated rapid, convenient, highly sensitive, and low cost detection of lead(II) ions in water samples, using a custom made battery-powered portable device, and a smart phone as the detector.

Bubble-Mediated Ultrasensitive Multiplex Detection of Metal Ions in Three-Dimensional DNA Nanostructure-Encoded Microchannels

The development of rapid and sensitive point-of-test devices for on-site monitoring of heavy-metal contamination has great scientific and technological importance. However, developing fast, inexpensive, and sensitive microarray sensors to achieve such a goal remains challenging. In this work, we present a DNA-nanostructured microarray (DNM) with a tubular three-dimensional sensing surface and an ordered nanotopography. This microarray enables enhanced molecular interaction toward the rapid and sensitive multiplex detection of heavy-metal ions. In our design, the use of DNA tetrahedral-structured probes engineers the sensing interface with spatially resolved and density-tunable sensing spots that improve the microconfined molecular recognition. A bubble-mediated shuttle reaction was used inside the DNM-functionalized microchannel to improve the target-capturing efficiency. Using this novel DNM biosensor, the sensitive and selective detection of multiple heavy-metal ions (i.e., Hg²⁺, Ag⁺, and Pb²⁺) was achieved within 5 min, the detection limit was down to 10, 10, and 20 nM for Hg²⁺, Ag⁺, and Pb²⁺, respectively. The feasibility of our DNM sensor was further demonstrated by probing heavy-metal ions in real water samples with a direct optical readout. Beyond metal ions, this unique DNM sensor can easily be extended to in vitro bioassays and clinical diagnostics.

A sensitive biosensor with a DNAzyme for lead(II) detection based on fluorescence turn-on

In this paper, we described a new DNAzyme-based fluorescent biosensor for the detection of Pb(2+). In the biosensor, the bulged structure is formed between the substrate labeled with fluorescein amidite (FAM) and DNAzyme after being annealed. Ethidium bromide (EB), the DNA intercalator, then intercalates into the double-stranded DNA section. Once FAM is excited, the FRET takes place from FAM to EB, which leads to the fluorescence of FAM decreasing greatly. In the presence of Pb(2+), the substrate is cleaved by DNAzyme, which breaks the bulged structure. Then EB is released and the FRET from FAM to EB is inhibited. In this case, the fluorescence of FAM increases dramatically. Thus, the Pb(2+) ions can be detected by measuring the fluorescence enhancement of FAM. Under optimal conditions, the increased fluorescence intensity ratio of FAM is dependent on the lead level in the sample, and exhibits a linear response over a Pb(2+) concentration range of 0-100 nM with a detection limit of 530 pM. The sensor showed high selectivity in the presence of a number of interference ions. The river water samples were also tested with satisfying results by using the new method. This sensor is highly sensitive and simple without any additional treatments, which provides a platform for other biosensors based on DNAzyme.

Isothermal Amplification of Nucleic Acids

Isothermal amplification of nucleic acids is a simple process that rapidly and efficiently accumulates nucleic acid sequences at constant temperature. Since the early 1990s, various isothermal amplification techniques have been developed as alternatives to polymerase chain reaction (PCR). These isothermal amplification methods have been used for biosensing targets such as DNA, RNA, cells, proteins, small molecules, and ions. The applications of these techniques for in situ or intracellular bioimaging and sequencing have been amply demonstrated. Amplicons produced by isothermal amplification methods have also been utilized to construct versatile nucleic acid nanomaterials for promising applications in biomedicine, bioimaging, and biosensing. The integration of isothermal amplification into microsystems or portable devices improves nucleic acid-based on-site assays and confers high sensitivity. Single-cell and single-molecule analyses have also been implemented based on integrated microfluidic systems. In this review, we provide a comprehensive overview of the isothermal amplification of nucleic acids encompassing work published in the past two decades. First, different isothermal amplification techniques are classified into three types based on reaction kinetics. Then, we summarize the applications of isothermal amplification in bioanalysis, diagnostics, nanotechnology, materials science, and device integration. Finally, several challenges and perspectives in the field are discussed.

Highly sensitive electrochemical sensor using a MWCNTs/GNPs-modified electrode for lead (II) detection based on Pb(2+)-induced G-rich DNA conformation

A sensitive electrochemical lead ion (Pb(2+)) sensor based on carboxylic acid group functionalized multi-walled carbon nanotubes (MWNTs-COOH) and direct electrodeposited gold nanoparticles (GNPs) was developed for Pb(2+) detection. The DNA capture probe was self-assembled onto the surface of the modified electrode for hybridizing with the guanine-rich (G-rich) aptamer probe and for forming the DNA double helix structure. When Pb(2+) was added in, the DNA duplex unwound and formed a stabilized G-quadruplex (G4) due to the Pb(2+)-induced G-rich DNA conformation. Also, methylene blue (MB) was selected as the G4-binding indicator. Compared with previous Pb(2+) sensors, the proposed sensor had better sensitivity, because the modified MWCNTs/GNPs could provide a large surface area and good charge-transport capacity to dramatically improve the DNA attachment quantity and sensor performance. The sensor could detect Pb(2+) in a range from 5.0 × 10(-11) to 1.0 × 10(-14) M, with a detection of 4.3 × 10(-15) M.

Functional nucleic acid-based sensors for heavy metal ion assays

Heavy metal contaminants such as lead ions (Pb(2+)), mercury ions (Hg(2+)) and silver ions (Ag(+)) can cause significant harm to humans and generate enduring bioaccumulation in ecological systems. Even though a variety of methods have been developed for Pb(2+), Hg(2+) and Ag(+) assays, most of them are usually laborious and time-consuming with poor sensitivity. Due to their unique advantages of excellent catalytic properties and high affinity for heavy metal ions, functional nucleic acids such as DNAzymes and aptamers show great promise in the development of novel sensors for heavy metal ion assays. In this review, we summarize the development of functional nucleic acid-based sensors for the detection of Pb(2+), Hg(2+) and Ag(+), and especially focus on two categories including the direct assay and the amplification-based assay. We highlight the emerging trends in the development of sensitive and selective sensors for heavy metal ion assays as well.