An electrochemical acetylcholine sensor based on lichen-like nickel oxide nanostructure

Reduced graphene oxide/zinc oxide composite as an electrochemical sensor for acetylcholine detection

Acetylcholine (ACh) plays a pivotal role as a neurotransmitter, influencing nerve cell communication and overall nervous system health. Imbalances in ACh levels are linked to neurodegenerative diseases, such as Alzheimer's and Parkinson's. This study focused on developing electrochemical sensors for ACh detection, utilizing graphene oxide (GO) and a composite of reduced graphene oxide and zinc oxide (rGO/ZnO). The synthesis involved modified Hummers' and hydrothermal methods, unveiling the formation of rGO through deoxygenation and the integration of nano-sized ZnO particles onto rGO, as demonstrated by XPS and TEM. EIS analysis also revealed the enhancement of electron transfer efficiency in rGO/ZnO. Cyclic voltammograms of the electrode, comprising the rGO/ZnO composite in ACh solutions, demonstrated prominent oxidation and reduction reactions. Notably, the composite exhibited promise for ACh detection due to its sensitivity, low detection threshold, reusability, and selectivity against interfering compounds, specifically glutamate and gamma-aminobutyric acid. The unique properties of rGO, such as high specific surface area and electron mobility, coupled with ZnO's stability and catalytic efficiency, contributed to the composite's potential in electrochemical sensor applications. This research, emphasizing the synthesis, fabrication, and characterization of the rGO/ZnO composite, established itself as a reliable platform for detecting the acetylcholine neurotransmitter.

FAST (Flexible Acetylcholine Sensing Thread): Real-Time Detection of Acetylcholine with a Flexible Solid-Contact Potentiometric Sensor

Acetylcholine (ACh) is involved in memory and learning and has implications in neurodegenerative diseases; it is therefore important to study the dynamics of ACh in the brain. This work creates a flexible solid-contact potentiometric sensor for in vitro and in vivo recording of ACh in the brain and tissue homogenate. We fabricate this sensor using a 250 μm diameter cotton yarn coated with a flexible conductive ink and an ACh sensing membrane that contains a calix[4]arene ionophore. The exposed ion-to-electron transducer was sealed with a 2.5 μm thick Parylene C coating to maintain the flexibility of the sensor. The resulting diameter of the flexible ACh sensing thread (FAST) was 400 μm. The FAST showed a linear response range from 1.0 μM to 10.0 mM in deionized water, with a near-Nernstian slope of 56.11 mV/decade and a limit of detection of 2.6 μM. In artificial cerebrospinal fluid, the limit of detection increased to 20 μM due to the background signal of ionic content of the cerebrospinal fluid. The FAST showed a signal stability of 226 μV/h over 24 h. We show that FAST can measure ACh dynamics in sheep brain tissue and sheep brain homogenate after ACh spiking. FAST is the first flexible electrochemical sensor for monitoring ACh dynamics in the brain.

U-fiber-based biosensor for temperature-compensated acetylcholine-specific measurement

This paper presents a U-fiber-based biosensor to achieve temperature-compensated acetylcholine-specific measurement. The surface plasmon resonance (SPR) and multimode interference (MMI) effects are simultaneously realized in a U-shaped fiber structure for the first time, to the best of our knowledge. The experimental results show refractive index (RI) sensitivities of 3042 and 2958 nm/RIU and temperature sensitivities of -0.47 and -0.40 nm/°C for the MMI and SPR, which are greatly improved compared with the traditional structure. Simultaneously, a sensitivity matrix for detecting two parameters is introduced to solve the problem of temperature interference of biosensors based on RI changes. Label-free detection of acetylcholine (ACh) was achieved by immobilizing acetylcholinesterase (AChE) on optical fibers. The experimental results show that the sensor can realize the specific detection of acetylcholine and has good stability and selectivity, and the detection limit of the sensor is 30 nM. The sensor has the advantages of simple structure, high sensitivity, convenient operation, direct insertion into small spaces, temperature compensation, etc., which provide an important supplement to traditional fiber-optic SPR biosensors.

An overview of recent analysis and detection of acetylcholine

Acetylcholine (ACh), the major neurotransmitter secreted by cholinergic neurons, is widely found in the peripheral and central nervous systems, and its main function is to complete the transmission of neural signals. When cholinergic neurons are impaired, the synthesis and decomposition of ACh are abnormal and the neural signalling transition is blocked. To some extent, the concentration changes of ACh reflects the occurrence and development of many kinds of nervous system diseases, such as Alzheimer's disease, Parkinson's disease, Myasthenia gravis and so on. Thus, researches of the physiological and pathological roles and the tracking of the concentration changes of ACh in vivo are significant to the prevention and treatment of these diseases. In the paper, the pathophysiological functions and the comprehensive research progress on detection methods of ACh are summarized. Specifically, the latest research and related applications of the optical and electrochemical biosensors are described, and the future development directions and challenges are prospected, which provides a reference for the detection and applications of ACh.

Selective determination of epinephrine using electrochemical sensor based on ordered mesoporous carbon / nickel oxide nanocomposite

A nanocomposite of ordered mesoporous carbon/nickel oxide (OMC-NiO) was synthesized by hard-templating method. The nanocomposite remained ordered mesostructure and high surface area with the NiO nanocrystals embedded in the wall of the OMC. A sensitive sensor for electrochemical detection of epinephrine (EP) was developed with GCE modified by OMC-NiO nanocomposite. Cyclic voltammogram (CV) and differential pulse voltammetry (DPV) were used as the techniques to explore the electrochemical behavior of EP on OMC-NiO/GCE surface. The result showed that the electrode demonstrated better electrocatalytic performance to EP compared to that seen at OMC/GCE. Under the optimum condition, DPV measurements of the electrode response displayed a linear detection range for 8.0 × 10^-7 to 5.0 × 10^-5 M with a detection limit of 8.5 × 10^-8 M (S/N = 3). It is worth noting that the electrocatalytic redox mechanism of EP on the electrode have studied through experiments and calculations (cyclic voltammetry and molecular electrostatic potential distribution). Moreover, the electrocatalytic behavior for the oxidation of EP and uric acid (UA) on OMC-NiO/GCE surface was investigated. The result showed that the sensor can be used to selectively determinate EP in the presence of an excesses of UA. Finally, the developed sensor was successfully applied to the determination of EP in spiked human blood serum and EP injection with satisfactory results.

"Nano": An Emerging Avenue in Electrochemical Detection of Neurotransmitters

The growing importance of nanomaterials toward the detection of neurotransmitter molecules has been chronicled in this review. Neurotransmitters (NTs) are chemicals that serve as messengers in synaptic transmission and are key players in brain functions. Abnormal levels of NTs are associated with numerous psychotic and neurodegenerative diseases. Therefore, their sensitive and robust detection is of great significance in clinical diagnostics. For more than three decades, electrochemical sensors have made a mark toward clinical detection of NTs. The superiority of these electrochemical sensors lies in their ability to enable sensitive, simple, rapid, and selective determination of analyte molecules while remaining relatively inexpensive. Additionally, these sensors are capable of being integrated in robust, portable, and miniaturized devices to establish point-of-care diagnostic platforms. Nanomaterials have emerged as promising materials with significant implications for electrochemical sensing due to their inherent capability to achieve high surface coverage, superior sensitivity, and rapid response in addition to simple device architecture and miniaturization. Considering the enormous significance of the levels of NTs in biological systems and the advances in sensing ushered in with the integration of nanotechnology in electrochemistry, the analysis of NTs by employing nanomaterials as interface materials in various matrices has emerged as an active area of research. This review explores the advancements made in the field of electrochemical sensors for the sensitive and selective determination of NTs which have been described in the past two decades with a distinctive focus on extremely innovative attributes introduced by nanotechnology.

Dual-Ionomer-Based Device: Acetylcholine Transport and Nonenzymatic Sensing

The malfunctioning in the release of acetylcholine (ACh⁺), leading to consequential damages in the neural system, has become an impulsion for the development of numerous progressive transport and detection gadgets. However, several challenges, such as laterality and complexity of transport devices, low precision of amperometric detection systems, and sumptuous, multistaged enzymatic quantification methods, have not yet been overcome. Herein, ionomers, because of their selective ion transporting nature, are chosen as suitable candidates for being implemented into both targeted ACh⁺ delivery and sensing systems. Based on these two approaches, for the very first time in the literature, the disulfonated poly(arylene ether sulfone) membrane is concurrently (i) used in the mimicry of transduction of the electrical-to-ionic signal in a neural network as "Acetylcholine Pen" (ACh⁺ Pen) and (ii) operated as a highly sensitive, conductivity-based ACh⁺ quantifier. Our dual device, being able to operate under an actual action potential of 55 mV_bias, shows a strong potential of future applicability in real-time ionic delivery-and-sensing systems.

Influence of heating rate, temperature, pressure on the structure, and phase transition of amorphous Ni material: A molecular dynamics study

The present article is aimed to investigate influence of the heating rate, temperature (T), pressure (P) on the structure and phase transition of amorphous Ni material with heating rate 2 × 105, 2 × 106 and 2 × 107 K/s at T = 300 K; T = 300, 400, 500, 600, 700, 800, 900 and 1000 K at heating rate 2 × 106 K/s; T = 300, 621 and 900 K at P = 1, 2, 3, 4 and 5 GPa by molecular dynamics simulation method with Sutton-Chen embedded potential and periodic boundary conditions. The structure of amorphous Ni material determined through the radial distribution function, the total energy, the size and the average coordination number. The phase transition and the glass transition temperature determined through the relationship between the total energy and temperature. The result shows that when the heating rate increases, the first peak's position for the radial distribution function is 2.45 Å and a constant, the first peak's height, the total energy and the size increase, the average coordination number decreases from 13 to 12. When temperature increases from 300 to 1000 K at P = 0 GPa, the position decreases from 2.45 Å to 2.40 Å, the average coordination number is 13 and a constant, glass transition temperature is 631 K, the total energy increases, the size increases and happens the phase transition from the amorphous state to the liquid state. When pressure increases from 0 GPa to 5 GPa at T = 300, 621 and 900 K, the position decreases, the height increases, the total energy increases, the size decreases, the average coordination number decreases from 13 to 12, that shows with amorphous Ni material when increasing heating rate, T, P lead to structural change, phase transition of materials is significant.

Simultaneous detection of l-aspartic acid and glycine using wet-chemically prepared Fe3O4@ZnO nanoparticles: real sample analysis

An easy and reliable wet-chemical method was used to synthesize iron oxide doped zinc oxide nanoparticles (Fe₃O₄@ZnO NPs) at a low-temperature under alkaline medium.

Photothermal inactivation of methicillin-resistant Staphylococcus aureus: anti-biofilm mediated by a polypyrrole-carbon nanocomposite

Widespread resistance to antibiotics amongst pathogens has become a tremendous challenge of high morbidity and mortality rates which increases the needs to exploring novel methods of treatment. An efficient antimicrobial procedure to root out pathogenic bacteria is photothermal therapy. In this study, antimicrobial effects of a polypyrrole-carbon nanocomposite (PPy-C) upon laser irradiation in order to destroy the pathogenic gram-positive bacterium, methicillin-resistant Staphylococcus aureus (MRSA) were assessed. The bacterial cells were incubated with 500, 750 and 1000 μg ml-1 concentrations of PPy-C and irradiated with an 808-nm laser at a power density of 1.0 W cm-2. To indicate the biocompatibility and toxic effect of the nanocomposite without and with laser irradiation, the authors counted the number of CFUs and compared it to an untreated sample. Antibacterial mechanisms of PPy-C were assessed through temperature increment, reactive oxygen species production, and protein and DNA leakages. Photothermal heating assay showed that 26°C temperature increases in the presence of 1000 µg ml-1 PPy-C led to >98% killing of MRSA. Furthermore, 20 min radiation of near-infrared light to PPy-C in different concentrations indicated destruction and reduction in the MRSA biofilm formation. Therefore, PPy-C was introduced as a photothermal absorber with a bactericidal effect in MRSA.

Direct Electrochemical Detection of Glutamate, Acetylcholine, Choline, and Adenosine Using Non-Enzymatic Electrodes

Non-electroactive neurotransmitters such as glutamate, acetylcholine, choline, and adenosine play a critical role in proper activity of living organisms, particularly in the nervous system. While enzyme-based sensing of this type of neurotransmitter has been a research interest for years, non-enzymatic approaches are gaining more attention because of their stability and low cost. Accordingly, this focused review aims to give a summary of the state of the art of non-enzymatic electrochemical sensors used for detection of neurotransmitter that lack an electrochemically active component. In place of using enzymes, transition metal materials such as those based on nickel show an acceptable level of catalytic activity for neurotransmitter sensing. They benefit from fast electron transport properties and high surface energy and their catalytic activity can be much improved if their surface is modified with nanomaterials such as carbon nanotubes and platinum nanoparticles. However, a general comparison reveals that the performance of non-enzymatic biosensors is still lower than those that use enzyme-based methods. Nevertheless, their excellent stability demonstrates that non-enzymatic neurotransmitter sensors warrant additional research in order to advance them toward becoming an acceptable replacement for the more expensive enzyme-based sensors.

Nanomaterials-Based Electrochemical Sensors for In Vitro and In Vivo Analyses of Neurotransmitters

Neurotransmitters are molecules that transfer chemical signals between neurons to convey messages for any action conducted by the nervous system. All neurotransmitters are medically important; the detection and analysis of these molecules play vital roles in the diagnosis and treatment of diseases. Among analytical strategies, electrochemical techniques have been identified as simple, inexpensive, and less time-consuming processes. Electrochemical analysis is based on the redox behaviors of neurotransmitters, as well as their metabolites. A variety of electrochemical techniques are available for the detection of biomolecules. However, the development of a sensing platform with high sensitivity and selectivity is challenging, and it has been found to be a bottleneck step in the analysis of neurotransmitters. Nanomaterials-based sensor platforms are fascinating for researchers because of their ability to perform the electrochemical analysis of neurotransmitters due to their improved detection efficacy, and they have been widely reported on for their sensitive detection of epinephrine, dopamine, serotonin, glutamate, acetylcholine, nitric oxide, and purines. The advancement of electroanalytical technologies and the innovation of functional nanomaterials have been assisting greatly in in vivo and in vitro analyses of neurotransmitters, especially for point-of-care clinical applications. In this review, firstly, we focus on the most commonly employed electrochemical analysis techniques, in conjunction with their working principles and abilities for the detection of neurotransmitters. Subsequently, we concentrate on the fabrication and development of nanomaterials-based electrochemical sensors and their advantages over other detection techniques. Finally, we address the challenges and the future outlook in the development of electrochemical sensors for the efficient detection of neurotransmitters.

Recent Advances in the Detection of Neurotransmitters

Neurotransmitters are chemicals that act as messengers in the synaptic transmission process. They are essential for human health and any imbalance in their activities can cause serious mental disorders such as Parkinson’s disease, schizophrenia, and Alzheimer’s disease. Hence, monitoring the concentrations of various neurotransmitters is of great importance in studying and diagnosing such mental illnesses. Recently, many researchers have explored the use of unique materials for developing biosensors for both in vivo and ex vivo neurotransmitter detection. A combination of nanomaterials, polymers, and biomolecules were incorporated to implement such sensor devices. For in vivo detection, electrochemical sensing has been commonly applied, with fast-scan cyclic voltammetry being the most promising technique to date, due to the advantages such as easy miniaturization, simple device architecture, and high sensitivity. However, the main challenges for in vivo electrochemical neurotransmitter sensors are limited target selectivity, large background signal and noise, and device fouling and degradation over time. Therefore, achieving simultaneous detection of multiple neurotransmitters in real time with long-term stability remains the focus of research. The purpose of this review paper is to summarize the recently developed sensing techniques with the focus on neurotransmitters as the target analyte, and to discuss the outlook of simultaneous detection of multiple neurotransmitter species. This paper is organized as follows: firstly, the common materials used for developing neurotransmitter sensors are discussed. Secondly, several sensor surface modification approaches to enhance sensing performance are reviewed. Finally, we discuss recent developments in the simultaneous detection capability of multiple neurotransmitters.

Chitosan capped nickel oxide nanoparticles as a saturable absorber in a tunable passively Q-switched erbium doped fiber laser

Nickel oxide (NiO) nanoparticles successfully prepared from a nickel(ii) chloride hexahydrate precursor are used to form a chitosan capped NiO nanoparticle thin film to serve as a saturable absorber (SA) for the generation of passively Q-switched pulses in an erbium doped fiber laser (EDFL). The NiO/chitosan SA based EDFL is able to generate stable pulsed outputs at a low threshold pump power of 104.90 mW with a central wavelength at 1562 nm. The highest pulse energy obtainable by the system is 15.30 nJ at a repetition rate of 42.66 kHz and a pulse duration of 2.02 μs. The laser has a spectral range of 58 nm from 1522 to 1580 nm, covering the C and L bands and even portions of the S band. This study experimentally demonstrates that the potential of the NiO/chitosan film as an SA material for Q-switching operations, combined with the biocompatibility, non-toxicity and high thermal resistance of Chitosan, holds great prospects for a broad range of applications.

Nickel oxide (NiO) nanoparticles prepared from a nickel(ii) chloride hexahydrate precursor are used to form a chitosan capped NiO nanoparticle thin film that serves as a saturable absorber in a passively Q-switched erbium doped fiber laser.

A signal-on built in-marker electrochemical aptasensor for human prostate-specific antigen based on a hairbrush-like gold nanostructure

A green electrodeposition method was firstly employed for the synthesis of round hairbrush-like gold nanostructure in the presence of cadaverine as a size and shape directing additive. The nanostructure which comprised of arrays of nanospindles was then applied as a transducer to fabricate a signal-on built in-marker electrochemical aptasensor for the detection of human prostate-specific antigen (PSA). The aptasensor detected PSA with a linear concentration range of 0.125 to 128 ng mL-1 and a limit of detection of 50 pg mL-1. The aptasensor was then successfully applied to detect PSA in the blood serum samples of healthy and patient persons.

Towards timely Alzheimer diagnosis: A self-powered amperometric biosensor for the neurotransmitter acetylcholine

Serious brain disorders, such as the Alzheimer's Disease (AD), are associated with a marked drop in the levels of important neurotransmitters, such as acetylcholine (ACh). Real time monitoring of such biomarkers can therefore play a critical role in enhancing AD therapies by allowing timely diagnosis, verifications of treatment effectiveness, and developments of new medicines. In this study, we present the first acetylcholine/oxygen hybrid enzymatic fuel cell for the self-powered on site detection of ACh in plasma, which is based on the combination of an enzymatic anode with a Pt cathode. Firstly, an effective acetylcholinesterase immobilized electrode was developed and its electrochemical performance evaluated. Highly porous gold was used as the electrode material, and the enzyme was immobilized via a one step rapid and simple procedure that does not require the use of harsh chemicals or any electrode/enzyme pre-treatments. The resulting enzymatic electrode was subsequently used as the anode of a miniature flow-through membrane-less fuel cell and showed excellent response to varying concentrations of ACh. The peak power generated by the fuel cell was 4nW at a voltage of 260mV and with a current density of 9μAcm^-2. The limit of detection of the fuel cell sensor was 10μM, with an average response time as short as 3min. These exciting results open new horizons for point-of-care Alzheimer diagnosis and provide an attractive potential alternative to established methods that require laborious and time-consuming sample treatments and expensive instruments.

Label-free electrochemical aptasensing of the human prostate-specific antigen using gold nanospears

Gold nanospears were electrodeposited with the assistance of arginine as a soft template and precise selection of experimental parameters. The nanospears were then employed as a transducer to immobilize an aptamer of prostate-specific antigen (PSA) and fabrication of a label-free electrochemical aptasensor. The aptasensor was employed for the detection of PSA with a linear concentration range of 0.125-200ngmL(-1) and a limit of detection of 50pgmL(-1). The aptasensor was successfully applied to detect PSA in blood serum samples of healthy and patient persons.

Electrooxidation and determination of perphenazine on a graphene oxide nanosheet-modified electrode

The electrochemical behavior of perphenazine was investigated on a graphene oxide nanosheet-modified glassy carbon electrode in a phosphate buffer solution at pH 7.4.