Polyoxometalate@magnetic graphene as versatile immobilization matrix of Ru(bpy)3(2+) for sensitive magneto-controlled electrochemiluminescence sensor and its application in biosensing

Highly selective detection and removal of mercury ions in the aquatic environment based on magnetic ZIF-71 multifunctional composites with sufficient chlorine functional groups

The development of both detection and removal technologies for heavy metal ions is of great importance. Most of the existing adsorbents that contain oxygen, nitrogen or sulfur functional groups can remove heavy metals, but achieving both selective detection and removal of a single metal ion is difficult because they bind to a wide range of heavy metal ions. Herein, we selected zeolite imidazolium hydrochloride framework-71 (ZIF-71) with sufficient chlorine functional groups to fabricate magnetic ZIF-71 multifunctional composites (M-ZIF-71). M-ZIF-71 had a large specific surface area, excellent water stability, and good magnetic properties, which made M-ZIF-71 conducive to the separation and recovery of adsorbents and the assembly of electrodes. M-ZIF-71 exhibited high selectivity, wide linear range (1-500 μg/L), and low detection limit (0.32 μg/L) for electrochemical detection of mercury ions (Hg2+). Meanwhile, M-ZIF-71 demonstrated rapid Hg2+ adsorption with a high capacity of 571.2 mg/g and excellent recyclability. The high selectivity for Hg2+ was attributed to the powerful affinity of highly electronegative chlorine and Hg2+. Moreover, XPS spectra demonstrated the interaction between chlorine and Hg2+. This work provides a new inspiration for applications in the targeted monitoring and removal of heavy metal pollution.

Electrochemiluminescent imaging of a NADH-based enzymatic reaction confined within giant liposomes

Herein, transient releases either from NADH-loaded liposomes or enzymatic reactions confined in giant liposomes were imaged by electrochemiluminescence (ECL). NADH was first encapsulated with the [Ru(bpy)3]2+ luminophore inside giant liposomes (around 100 µm in diameter) made of DOPC/DOPG phospholipids (i.e., 1,2-dioleolyl-sn-glycero-3-phosphocholine/1,2-dioleoyl-sn-glycerol-3-phospho-(1'-rac-glycerol) sodium salt) on their inner- and outer-leaflet, respectively. Then, membrane permeabilization triggered upon contact between the liposome and a polarized ITO electrode surface and ECL was locally generated. Combination of amperometry, photoluminescence, and ECL provided a comprehensive monitoring of a single liposome opening and content release. In a second part, the work is focused on the ECL characterization of NADH produced by glucose dehydrogenase (GDH)-catalyzed oxidation of glucose in the confined environment delimited by the liposome membrane. This was achieved by encapsulating both the ECL and catalytic reagents (i.e., the GDH, glucose, NAD+, and [Ru(bpy)3]2+) in the liposome. In accordance with the results obtained, NADH can be used as a biologically compatible ECL co-reactant to image membrane permeabilization events of giant liposomes. Under these conditions, the ECL signal duration was rather long (around 10 s). Since many enzymatic reactions involve the NADH/NAD+ redox couple, this work opens up interesting prospects for the characterization of enzymatic reactions taking place notably in artificial cells and in confined environments.

A polymer dot-based NADH-sensitive electrochemiluminescence biosensor for analysis of metabolites in serum

Nicotinamide adenine dinucleotide (NADH) plays a pivotal role in metabolism. Convenient detection of NADH and its related metabolites has the pursuit of point-of-care and clinical analysis. Here, we propose a polymer dots (Pdots)-based NADH-sensitive electrochemiluminescence (ECL) biosensor for detection of NADH and three metabolites. Pdots acted as the efficient ECL emitters without additional modification to construct this biosensor. Specially, NADH both acted as the final detection target and at the same time as the bio-coreactants to sensitively influence the ECL intensities, in which NADH was generated or consumed in the presence of the target analyte and their specific enzyme. For glucose and lactic acid detection, NAD+ was reduced to NADH to generate an enhanced ECL signal. Conversely, for pyruvate detection, NADH was consumed to further decrease the ECL. The designed Pdots-based ECL biosensor showed wide detection ranges, high selectivity and low limits of detection of 4.6 μM, 0.7 μM and 0.5 μM for the analysis of three analytes, respectively. This strategy was successfully applied in quantifying the concentrations of glucose, lactic acid and pyruvate in human serum, which also has the potential to be implemented as a powerful and fast tool for ECL sensing of NADH and other related metabolites for point-of-care use and disease monitoring.

A novel molecularly imprinting polypyrrole electrochemiluminescence sensor based on MIL-101-g-C3N4 for supersensitive determination of ciprofloxacin

Ciprofloxacin (CIP), a quinolone antibiotic, was rapidly and sensitively detected by integrating the molecularly imprinted polymer (MIP) with an ultra-sensitive electrochemiluminescence (ECL) method. g-C3N4, a typical polymer semiconductor, exhibited outstanding ECL efficiency and excellent ECL stability after combining with an iron-based metal-organic framework (MIL-101). Subsequently, the molecularly imprinted polypyrrole was electropolymerized on the composites of MIL-101-g-C3N4 modified glassy carbon electrode (GCE). The specific sites that could target rebinding the CIP molecules were formed on the surface of MIP after extracting the CIP templates. The determination of specific concentrations of CIP could be realized according to the difference in ECL intensity (△ECL) between the eluting and rebinding of the CIP. Under optimal conditions, a good linear response of △ECL and the logarithm of CIP concentrations was obtained in the range 1.0 × 10-9 ~ 1.0 × 10-5 mol/L, with a detection limit of 4.5 × 10-10 mol/L (S/N = 3) (the working potential was -1.8 ~ 0 V). The RSD of all points in the calibration plot was less than 5.0% and the real samples recovery was between 98.0 and 104%. This paper displays satisfactory selectivity and sensitivity, providing a rapid, convenient, and cheap method for the determination of CIP in real samples.

Organophosphonic Acid-Regulating Assembly of PV-SbIII Polyoxotungstate and Its Potential in Building a Dual-Signal Readout Electrochemical Aptasensor for Carcinogen Detection

Template-directed assembly of giant cluster-based nanomaterials is an everlasting theme in cluster science. In this work, ethylenediamine tetramethylphosphonic acid [H₈EDTPA = (POCH₂(OH)₂)₄C₂H₄N₂] and [B-α-SbW₉O₃₃]^9- were, respectively, used as an organic template and an inorganic template to prepare an organophosphonic acid-regulating P^V-Sb^III-heteroatom-inserted polyoxotungstate aggregate [H₂N(CH₃)₂]₅Na₁₁H₉[CeW₄O₁₀(HEDTPA)SbW₁₅O₅₀][B-α-SbW₉O₃₃]₂·36H₂O (1). Noteworthily, organophosphonic acid ligand not only works as an organic template leading to the assembly of a [HEDTPASbW₁₅O₅₀]^14- building block but also further bridges the sandwich-type [CeW₄O₁₀(B-α-SbW₉O₃₃)₂]^11- entity. To extend its potential application in electrochemical sensing properties, we prepared a three-dimensional 1@EGO composite (EGO = reduced graphene oxide functionalized by ethylenediamine) with porous architecture and a prominent conducting ability. Furthermore, the 1@EGO composite was explored as a modification material for glassy carbon electrodes to build a dual-signal readout electrochemical aptasensor for carcinogens, which shows much better detection performance for aflatoxin B1 compared with traditional single-signal biosensors.

Two Innovative Fumaric Acid Bridging Lanthanide-Encapsulated Hexameric Selenotungstates Containing Mixed Building Units and Electrochemical Performance for Detecting Mycotoxin

Two particular fumaric acid bridging lanthanide-encapsulated selenotungstates [H₂N(CH₃)₂]₁₆Na₈[Ln₃(H₂O)₇]₂ [W₄O₈(C₄H₂O₄) (C₄H₃O₄)]₂[SeW₆O₂₅]₂[B-α-SeW₉O₃₃]₄·46H₂O [Ln = Ce³⁺ (1), La³⁺ (2)] were acquired by the deliberately designed step-by-step synthetic strategy, which are composed of four trilacunary Keggin [B-α-SeW₉O₃₃]^8- and two original [SeW₆O₂₅]^10- building units together with one fumaric acid bridging heterometallic [Ln₃(H₂O)₇]₂[W₄O₈(C₄H₂O₄) (C₄H₃O₄)]₂²⁸⁺ entity. Particularly, this heterometallic cluster contains four fumaric acid ligands, which play two different roles: one works as the pendant decorating the cluster and the other acts as the linker connecting the whole structure. In addition, the 1@DDA hybrid material was produced through the cation exchange of 1 and dimethyl distearylammonium chloride (DDA·Cl) and its beehive-shaped film of 1@DDA was prepared by the breath figure method, which can be further used to establish an electrochemical biosensor for detecting a kind of mycotoxin-ochratoxin A (OX-A). The 1@DDA beehive-shaped film-based electrochemical biosensor exhibits good reproducibility and specific sensing toward OX-A with a low detection limit of 29.26 pM. These results highlight the huge feasibility of long-chain flexible ligands in building lanthanide-encapsulated selenotungstates with structural complexity and further demonstrate great electrochemical application potentiality of polyoxometalate-involved materials in bioanalysis, tumor diagnosis, and iatrology.

Polyoxometalate Functionalized Sensors: A Review

Polyoxometalates (POMs) are a class of metal oxide complexes with a large structural diversity. Effective control of the final chemical and physical properties of POMs could be provided by fine-tuning chemical modifications, such as the inclusion of other metals or non-metal ions. In addition, the nature and type of the counterion can also impact POM properties, like solubility. Besides, POMs may combine with carbon materials as graphene oxide, reduced graphene oxide or carbon nanotubes to enhance electronic conductivity, with noble metal nanoparticles to increase catalytic and functional sites, be introduced into metal-organic frameworks to increase surface area and expose more active sites, and embedded into conducting polymers. The possibility to design POMs to match properties adequate for specific sensing applications turns them into highly desirable chemicals for sensor sensitive layers. This review intends to provide an overview of POM structures used in sensors (electrochemical, optical, and piezoelectric), highlighting their main functional features. Furthermore, this review aims to summarize the reported applications of POMs in sensors for detecting and determining analytes in different matrices, many of them with biochemical and clinical relevance, along with analytical figures of merit and main virtues and problems of such devices. Special emphasis is given to the stability of POMs sensitive layers, detection limits, selectivity, the pH working range and throughput.

A sandwich-configuration electrochemiluminescence immunoassay based on Cu2O@OMC-Ru nanocrystals and OMC-MoS2 nanocomposites for determination of alpha-fetoprotein

A sandwich-format electrochemiluminescence (ECL) immunosensor has been developed for alpha-fetoprotein (AFP) detection based on the use of ordered mesoporous carbon-molybdenum disulfide (OMC-MoS₂) as a sensor platform and cuprous oxide @ ordered mesoporous carbon-Ru(bpy)₃²⁺ (Cu₂O@OMC-Ru) composites as signal tags. OMC alongside MoS₂ plays a synergistic role in improving the electrochemical performance of the electrode in the electron transfer process. The uniform cubic-shaped Cu₂O@OMC-Ru nanocrystals display excellent luminous efficiency, with a signal amplification strategy of OMC-MoS₂ synergistic enhancement and Cu₂O@OMC which is capable of immobilizing more Ru(bpy)₃²⁺ serving as a tracing tag to label antibodies. A detectable ECL emission at a Cu₂O@OMC-Ru nanocrystals modified electrode is initiated at an applied voltage of +1.15 V (scanning range: 0-1.2 V), in the presence of the tripropylamine (TPA) as coreactant. With the increase in AFP concentration, the loading of Cu₂O@OMC-Ru at the electrode increases. Afterward, the ECL detection of AFP shows a wide linear range from 0.1 pg/mL to 10 ng/mL with a correlation coefficient of 0.9964 and a detection limit of 0.011 pg/mL (S/N = 3) under the optimal experimental conditions. The recoveries were in the range 91.2-97.1% with RSD varying from 4.8 to 8.5%. Overall, the novel immunosensor has been successfully applied to the analysis of human serum samples, indicating a great potential for application in clinical diagnostics.

Polyoxometalates in Analytical Sciences

Polyoxometalates (POMs) have been used for spectrophotometric determinations of silicon and phosphorus under acidic conditions, referred to as the molybdenum yellow method and molybdenum blue method, respectively. Many POMs are redox active and exhibit fascinating but complicated voltammetric responses. These compounds can reversibly accommodate and release many electrons without exhibiting structural changes, implying that POMs can function as excellent mediators and can be applied to sensitive determination methods based on catalytic electrochemical reactions. In addition, some rare-earth-metal-incorporated POMs exhibit fluorescence, which enables sensitive determination by the enhancement and quenching of fluorescence intensities. In this review, various analytical applications of POMs are introduced, mainly focusing on papers published after 2000, except for the molybdenum yellow method and molybdenum blue method.

Functional Magnetic Graphene Composites for Biosensing

Magnetic graphene composites (MGCs), which are composed of magnetic nanoparticles with graphene or its derivatives, played an important role in sensors development. Due to the enhanced electronic properties and the synergistic effect of magnetic nanomaterials and graphene, MGCs could be used to realize more efficient sensors such as chemical, biological, and electronic sensors, compared to their single component alone. In this review, we first reviewed the various routes for MGCs preparation. Then, sensors based on MGCs were discussed in different groups, including optical sensors, electrochemical sensors, and others. At the end of the paper, the challenges and opportunities for MGCs in sensors implementation are also discussed.

A versatile signal-enhanced ECL sensing platform based on molecular imprinting technique via PET-RAFT cross-linking polymerization using bifunctional ruthenium complex as both catalyst and sensing probes

Molecularly imprinted technique (MIT) has proven to be a significant tool in the analyzing area in virtue of its obvious advantages such as specific recognition, favorable stability to high temperature and higher sensitivity. Electrochemiluminescence (ECL) technology has also been receiving enormous attention as a powerful tool in sensing fields. However, sensors based on the combination of MIT and ECL technologies have seldom been reported yet. Herein, we find that Ru(bpy)₃²⁺ cannot only work as an efficient catalyst for photo-induced electron transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization, but also as a sensing probe for ECL sensor. Based on this, we successfully construct ECL sensors via the combination of MIT and ECL techniques. In details, poly(methacrylic acid) (PMAA) and cross-linked PMAA were synthesized first via a well-controlled PET-RAFT polymerization using Ru(bpy)₃²⁺ as catalyst under illumination of visible light with a wavelength of 460 nm, as confirmed by ¹H NMR and gel permeation chromatography (GPC). Then, negatively-charged Au nanoparticles (AuNPs) with average sizes of 20 nm were prepared and modified with Ru(bpy)₃²⁺ via electrostatic incorporation. MIPs were prepared on the surface of AuNPs using melamine (MEL) as the template via PET-RAFT controlled cross-linking polymerization. The MIPs modified AuNPs (AuNPs-MIPs) were then fixed on the surface of working electrode with Nafion to achieve a solid-state ECL sensing platform employing Ru(bpy)₃²⁺ as the ECL probes. The as-prepared sensor showed a wide detection range of 5.0 × 10^-13 - 5.0 × 10^-6 mol/L and a low detection limit of 1.0 × 10^-13 mol/L (S/N ≥ 3) was reached in the detection of MEL. Moreover, further tests for analyzing MEL structural analogues proved that the constructed ECL sensing platform could be utilized to detect various substances via specific recognitions.

Sensitive determination of chlorogenic acid in pharmaceutical products based on the decoration of 3D macroporous carbon with Au nanoparticles via polyoxometalates

A simple and sensitive electrochemical sensor is constructed for the detection of chlorogenic acid (CGA).

An ultrasensitive chemiluminescence aptasensor for indirect hemin detection based on aptamer recognition materials

MGO@H-Atp@Co-PP polymers were successfully prepared and used to construct a MGO@H-Atp@Co-PP-CL aptasensor.

Building a Three-Dimensional Nano-Bio Interface for Aptasensing: An Analytical Methodology Based on Steric Hindrance Initiated Signal Amplification Effect

The development of novel detection methodologies in electrochemiluminescence (ECL) aptasensor fields with simplicity and ultrasensitivity is essential for constructing biosensing architectures. Herein, a facile, specific, and sensitive methodology was developed unprecedentedly for quantitative detection of microcystin-LR (MC-LR) based on three-dimensional boron and nitrogen codoped graphene hydrogels (BN-GHs) assisted steric hindrance amplifying effect between the aptamer and target analytes. The recognition reaction was monitored by quartz crystal microbalance (QCM) to validate the possible steric hindrance effect. First, the BN-GHs were synthesized via self-assembled hydrothermal method and then applied as the Ru(bpy)₃²⁺ immobilization platform for further loading the biomolecule aptamers due to their nanoporous structure and large specific surface area. Interestingly, we discovered for the first time that, without the aid of conventional double-stranded DNA configuration, such three-dimensional nanomaterials can directly amplify the steric hindrance effect between the aptamer and target analytes to a detectable level, and this facile methodology could be for an exquisite assay. With the MC-LR as a model, this novel ECL biosensor showed a high sensitivity and a wide linear range. This strategy supplies a simple and versatile platform for specific and sensitive determination of a wide range of aptamer-related targets, implying that three-dimensional nanomaterials would play a crucial role in engineering and developing novel detection methodologies for ECL aptasensing fields.

Evidence for Charge Transfer at the Interface between Hybrid Phosphomolybdate and Epitaxial Graphene

The interfacing of polyoxometalates and graphene can be considered to be an innovative way to generate hybrid structures that take advantage of the properties of both components. Polyoxometalates are redox-sensitive and photosensitive compounds with high temperature stability (up to 400 °C for some), showing tunable properties depending on the metal incorporated inside the complex. Graphene has a unique electronic band structure combined with good material properties for electrical and optical applications. The spontaneous, rather than electrochemical, functionalization of epitaxial graphene on SiC with Keggin phosphomolybdate derivative TBA3[PMo11O39{Sn(C6H4)C≡C(C6H4)N2}] (named K(Mo)Sn[N2(+)]) bearing a phenyl diazonium unit is investigated. Graphene decoration is evidenced by means of AFM, Raman, XPS, and cyclic voltammetry, indicating a successful immobilization of the polyoxomolybdate. The covalent bonding of the polyoxometalate to the graphene substrate can be deduced from the appearance of a D band in the Raman spectra and from the loss of mobility in the electrical conduction. High-resolution XPS spectra reveal an electron transfer from the graphene to the Mo complex. The comparison of charge-carrier density measurements before and after grafting supports the p-type doping effect, which is further evidenced by work function UPS measurements.

An ultrasensitive sandwich type electrochemiluminescence immunosensor for triiodothyronine detection using silver nanoparticle-decorated graphene oxide as a nanocarrier

An ultrasensitive electrochemiluminescence (ECL) immunosensor was constructed to detect 3,3',5-triiodothyronine (T3). The system employed T3-conjugated, silver nanoparticle-decorated carboxylic graphene oxide (Ag@fGO-T3) as a carrier and anti-T3 antibody-tris(2,2'-bipyridyl) ruthenium(II) (Ru(bpy)3(2+)) as a probe. The Ag@fGO-T3 and Ru(bpy)3(2+) complex could be mobilized rapidly to the anode in the reaction chamber through electrophoresis. The fGO is reduced electrochemically at the electrode, and the electrons could transfer from an anode to the Ru(bpy)3(2+). The complex is excited at the electrode and an ECL signal is produced upon reacting with tripropylamine (TPrA). Because of its large surface area and excellent conductivity, Ag@fGO could enhance ECL signal significantly in the system. Quantitative measurement of T3 could be achieved in the range from 0.1 pg/mL to 0.8 ng/mL with a detection limit of 0.05 pg/mL. In addition, the novel immunosensor showed good specificity in the presence of serum, indicating its high potential in clinical use.

A facile label-free colorimetric aptasensor for acetamiprid based on the peroxidase-like activity of hemin-functionalized reduced graphene oxide

A facile aptasensor has been developed for the colorimetric detection of acetamiprid by using the hemin-functionalized reduced graphene oxide (hemin-rGO) composites. The as-prepared hemin-rGO composites possessed both the ability of rGO to physically adsorb the aptamers and the peroxidase-like activity of hemin that could catalyse 3,3,5,5-tetramethylbenzidine (TMB) in the presence of H2O2, to produce a solution with blue color. The well-dispersed hemin-rGO composites coagulated completely at the proper salt concentration; however, the coagulation of hemin-rGO was vanished when abundant aptamers were adsorbed on its surface because the attached negatively charged DNA backbone increased individual hemin-rGO electrostatic repulsion. In the detection scheme, acetamiprid with different concentrations was firstly incubated with the same amount of aptamer. The more acetamiprid in the tested solution, the less free aptamers were absorbed on the hemin-rGO surface, making the composites coagulate to a higher degree in the presence of the optimum NaCl concentration. As a consequence, the content of hemin-rGO in the supernatant was decreased after centrifugation, which catalysed oxidation of TMB in the presence of H2O2 to produce light blue color with a low absorbance. The color variation relavant to the acetamiprid concentration can be judged by the naked eyes and easily monitored by the inexpensive UV-vis spectrometer. Such designed aptasensor displayed a linear response for acetamiprid in the range from 100nM to 10μM with a detection limit of 40nM (S/N=3). This colorimetric aptasensing platform offers great advantages including the simple operation process, low-cost portable instrument, and user-friendly applications.