An off-on-off electrochemiluminescence approach for ultrasensitive detection of thrombin

Signal amplification strategies in photoelectrochemical sensing of carcinoembryonic antigen

Early detection of cancer markers is critical for cancer diagnosis and cancer therapy since these markers may indicate cancer risk, incidence, and disease prognosis. Carcinoembryonic antigen (CEA) is a type of non-specific and broad-spectrum cancer biomarker commonly utilized for early cancer diagnosis. Moreover, it serves as an essential tool to assess the efficacy of cancer treatment and monitor tumor recurrence as well as metastasis, thus garnering significant attention for precise and sensitive CEA detection. In recent years, photoelectrochemical (PEC) techniques have emerged as prominent methods in CEA detection due to the advantages of PEC, such as simple equipment requirements, cost-effectiveness, high sensitivity, low interference from background signals, and easy of instrument miniaturization. Different signal amplification methods have been reported in PEC sensors for CEA analysis. Based on these, this article reviews PEC sensors based on various signal amplification strategies for detection of CEA during the last five years. The advantages and drawbacks of these sensors were discussed, as well as future challenges.

Gold nanoparticle-based signal amplified electrochemiluminescence for biosensing applications

Since the content levels of biomarkers at the early stage of many diseases are generally lower than the detection threshold concentration, achieving ultrasensitive and accurate detection of these biomarkers is still one of the major goals in bio-analysis. To achieve ultrasensitive and reliable bioassay, it requires developing highly sensitive biosensors. Among all kinds of biosensors, electrogenerated chemiluminescence (ECL) based biosensors have attracted enormous attention due to their excellent properties. In order to improve the performance of ECL biosensors, gold nanoparticles (Au NPs) have been widely utilized as signal amplification tags. The introduction of Au NPs could dramatically enhance the performance of the constructed ECL biosensors via diverse ways such as electrode modification material, efficient energy acceptor in ECL resonant energy transfer (ECL-RET), reaction catalyst, surface plasmon resonance (SPR) enhancer, and as nanocarrier. Herein, we summarize recent developments and progress of ECL biosensors based on Au NPs signal amplification strategies. We will cover ECL applications of Au NPs as a signal amplification tag in the detection of proteins, metal ions, nucleic acids, small molecules, living cells, exosomes, and cell imaging. Finally, brief summary and future outlooks of this field will be presented.

Recent Achievements in Electrochemical and Surface Plasmon Resonance Aptasensors for Mycotoxins Detection

Mycotoxins are secondary metabolites of fungi that contaminate agriculture products. Their release in the environment can cause severe damage to human health. Aptasensors are compact analytical devices that are intended for the fast and reliable detection of various species able to specifically interact with aptamers attached to the transducer surface. In this review, assembly of electrochemical and surface plasmon resonance (SPR) aptasensors are considered with emphasis on the mechanism of signal generation. Moreover, the properties of mycotoxins and the aptamers selected for their recognition are briefly considered. The analytical performance of biosensors developed within last three years makes it possible to determine mycotoxin residues in water and agriculture/food products on the levels below their maximal admissible concentrations. Requirements for the development of sample treatment and future trends in aptasensors are also discussed.

Competitive aptasensor with gold nanoparticle dimers and magnetite nanoparticles for SERS-based determination of thrombin

It is known that the intensity of surface-enhanced Raman scattering (SERS) of monomeric gold nanoparticles (GNPs) is insufficient for ultrasensitive analysis. The authors describe dimeric GNPs for use in a competitive SERS and aptamer based assay for thrombin. The reagent 1,2-bis(4-pyridyl) ethylene serves as both the coupling agent and the Raman reporter on the GNP dimers. In the presence of thrombin, the hybridization of two aptamers, one attached to the GNP dimers, the other to magnetic nanoparticles, is competitively prevented. This method takes advantage of the unique "hot spots" of the GNP dimers to amplify the Raman signal. This results in an ultra-sensitive thrombin assay when compared to assays using GNP monomers. The limit of detection is as low as 1 fM of thrombin. The Raman intensity, best measured at 1612 cm^-1, increases linearly in the 1 fM to 10 nM thrombin concentration range. The method was applied to the determinaiton of thrombin in spiked simulated body fluid and human serum. Graphical abstract This method takes advantage of the unique "hot spots" of the gold nanoparticle dimers to amplify the Raman signal. The dimers are linked to the magnetic nanoparticles via an aptamer. The use of both competitive displacement and magnetic separation greatly improves the sensitivity of the thrombin assay.

Aptamer-peptide conjugates as a new strategy to modulate human α-thrombin binding affinity

Aptamers are single-stranded RNA or DNA molecules that specifically recognize their targets and have proven valuable for functionalizing sensitive biosensors. α-thrombin is a trypsin-like serine proteinase which plays a crucial role in haemostasis and thrombosis. An abnormal activity or overexpression of this protein is associated with a variety of diseases. A great deal of attention was devoted to the construction of high-throughput biosensors for accurately detect thrombin for the early diagnosis and treatment of related diseases. Herein, we propose a new approach to modulate the interaction between α-thrombin and the aptamer TBA₁₅. To this end, TBA₁₅ was chemically conjugated to two peptide sequences (TBA-G₃FIE-Ac and TBA-G₃EIF-Ac) corresponding to a short fragment of the acidic region of the human factor V, which is known to interact directly with exosite I. Surface Plasmon Resonance (SPR) results showed enhanced analytical performances of thrombin with TBA-G₃EIF-Ac than with TBA wild-type, reaching a limit of detection as low as 44.9 pM. Electrophoresis mobility shift assay (EMSA) corroborated the SPR results. Molecular dynamics (MD) simulations support experimental evidences and provided further insight into thrombin/TBA-peptide interaction. Our findings demonstrate that the combination of TBA₁₅ with key interacting peptides offers good opportunities to produce sensitive devices for thrombin detection and potential candidates to block thrombin activity.

Plasmon-Enhanced Electrochemiluminescence of Silver Nanoclusters for microRNA Detection

Surface plasmon-enhanced electrochemiluminescence (SPEECL) with excellent sensitivity and simplicity has attracted increasing attention. In this work, we reported a novel SPEECL with DNA templated silver nanoclusters (DNA-AgNCs) as ECL emitters and gold nanoparticles (AuNPs) as localized surface plasmon resonance (LSPR) source. The SPEECL with DNA-AgNCs as ECL luminophores possessed low toxicity and avoided the labeling process, which is favorable for its further sensing application. In addition, by investigation of the SPEECL under different distances between DNA-AgNCs and AuNPs, it was demonstrated that the SPEECL was distance dependent. Meanwhile, the SPEECL intensity changed with the sizes and interdistance of AuNPs under different electrodeposition time. Furthermore, by the combination of a cyclic amplification process with enzyme-free catalytic hairpin DNA, a sensitive SPEECL biosensor was proposed for the detection of microRNA (miRNA-21) successfully with a wide linear range from 1 aM to 10⁴ fM and a relatively low detection limit of 0.96 aM, which was applied in the detection of miRNA-21 in real samples with satisfying results. This novel, simple, sensitive, and selective SPEECL with label-free and low-toxic ECL emitters displayed a great potential for bioassay application.

Electrochemiluminecence nanogears aptasensor based on MIL-53(Fe)@CdS for multiplexed detection of kanamycin and neomycin

A dual gears electrochemiluminecence (ECL) aptasensing strategy for multiple selective determination of kanamycin and neocycin was designed on the basis of the combination of kanamycin and neocycin induced dual gears conversion, the loading platform of metal-organic frameworks (MOFs), surface plasmon resonance (SPR) and ECL resonance energy transfer (ERET) between CdS QDs and AuNPs (or PtNPs). In the absence of target, the dual gears were "off". Then the B1-AuNP (gear B) and aptamer 1-PtNPs acted as signal quenching elements to quench ECL intensity due to ERET process. Upon addition of kanamycin, the aptamer 1-PtNPs were removed from the gear gradually, the ECL was enhanced due to SPR process between AuNPs and CdS QDs. After the incubation of aptamer 2, the dual gears were "off" again and ECL intensity was decreased by ERET process between AuNPs and CdS QDs. In the presence of neomycin, dual gears were "on" again, the ECL signal was enhanced by SPR process between AuNPs and CdS QDs. Under optimal condition, the proposed aptasensor exhibited wide linear ranges of kanamycin (10^-10-10^-6 M) and neomycin (10^-9-10^-5 M), and relatively low detection limits to kanamycin (1.7 × 10^-11 M) and neomycin (3.5 × 10^-10 M). The developed aptasensor realized the multiple ECL detection of kanamycin and neomycin with single luminophore, and was successfully applied to the detection of kanamycin and neomycin in food samples.

Electrochemiluminescence biosensing based on different modes of switching signals

Electrochemiluminescence (ECL) has attracted much attention in various fields of analysis owing to low background signals, high sensitivity, and excellent controllability.

An electrochemical aptasensor for the highly sensitive detection of 8-hydroxy-2'-deoxyguanosine based on the hybridization chain reaction

In the present work a highly sensitive and selective aptasensor was developed for the determination of 8-hydroxy-2'-deoxyguanosine (8-OH-dG) based on the hybridization chain reaction (HCR) signal amplification. It was observed that the aptamer of 8-OH-dG could hybridize with the capture DNA immobilized on the gold electrode with a sticky tail left, which initiated the HCR and led to the formation of extended dsDNA structure on the electrode surface. Then the electroactive species ([Ru(NH₃)₆]³⁺, RuHex) intercalated into the dsDNA grooves to generate the amplified signal. However, in the presence of 8-OH-dG, the aptamer containing G-rich nucleic acid sequences would be induced to form a G-quadruplex structure, which made it impossible to continue the HCR. So the detection signal will significantly decrease. Under the optimal conditions, the peak current of RuHex was linear with the logarithm of 8-OH-dG concentration in the range from 10pM to 100μM with the detection limit of 2.5pM. By integrating the merits of enzyme-free amplification power of the HCR and the inherent high sensitivity of the electrochemical technique, the prepared aptasensor not only showed high sensitivity for the detection of 8-OH-dG, but also exhibited good selectivity against to the uric acid, an important interferent in the urine sample. Particularly, the aptasensor was applied to detect 8-OH-dG in urine samples with satisfactory results.

G-quadruplex-based aptamers against protein targets in therapy and diagnostics

Nucleic acid aptamers are single-stranded DNA or RNA molecules identified to recognize with high affinity specific targets including proteins, small molecules, ions, whole cells and even entire organisms, such as viruses or bacteria. They can be identified from combinatorial libraries of DNA or RNA oligonucleotides by SELEX technology, an in vitro iterative selection procedure consisting of binding (capture), partitioning and amplification steps. Remarkably, many of the aptamers selected against biologically relevant protein targets are G-rich sequences that can fold into stable G-quadruplex (G4) structures. Aiming at disseminating novel inspiring ideas within the scientific community in the field of G4-structures, the emphasis of this review is placed on: 1) recent advancements in SELEX technology for the efficient and rapid identification of new candidate aptamers (introduction of microfluidic systems and next generation sequencing); 2) recurrence of G4 structures in aptamers selected by SELEX against biologically relevant protein targets; 3) discovery of several G4-forming motifs in important regulatory regions of the human or viral genome bound by endogenous proteins, which per se can result into potential aptamers; 4) an updated overview of G4-based aptamers with therapeutic potential and 5) a discussion on the most attractive G4-based aptamers for diagnostic applications. This article is part of a Special Issue entitled "G-quadruplex" Guest Editor: Dr. Concetta Giancola and Dr. Daniela Montesarchio.

Luminescent Lanthanide-Based Organic/Inorganic Hybrid Materials for Discrimination of Glutathione in Solution and within Hydrogels

Glutathione (GSH) as a biothiol is an essential peptide related to various diseases. Although multiple strategies for biothiols detection have been developed, there is increasing demand for sensors that can differentiate GSH from cysteine (Cys) and homocysteine (Hcy), owing to the similar structures and thiol groups in these amino acids. Herein, we report a novel Eu³⁺/LAPONITE (Lap)-based organic/inorganic hybrid material for selective detection of GSH via an "off-on" process. The fluorescence of Eu(DPA)₃@Lap-Tris can be quenched by Cu²⁺ through photoinduced electron transfer (PET). The addition of GSH into the Eu(DPA)₃@Lap-Tris/Cu²⁺ system induces the removal of Cu²⁺ from Eu(DPA)₃@Lap-Tris and blocks PET, resulting in the recovery of fluorescence. This proposed assay demonstrates higher selectivity toward GSH than Cys and Hcy, and showed a detection limit of 162 nM within a linear range of 0.5-30 μM. Unlike other GSH selective sensors, this platform could be formed into a hydrogel while its sensitivity was maintained. The sensitive response to GSH in serum samples makes this platform an efficient tool for biological applications because of its ease of preparation, high selectivity, good biocompatibility, and low toxicity.

Progress and challenges in electrochemiluminescent aptasensors

The importance of developing new diagnostic and detection technologies for the growing number of sensing challenges is rising each year. Here, we present a comprehensive and concise review on electrochemiluminescent (ECL) aptasensors by putting special emphasis on its characteristic features, advances, challenges, and applications of ECL based aptasensors. ECL is an ideal tool for constructing such sensors because of its inherent characteristics and can be easily integrated into aptamer based sensing platforms. This review summarizes the "synergistic benefits" of ECL aptamer-based sensors; classifications of ECL aptamer-based assay designs, and signal amplification strategies. This critical review highlights the effects of integration of nanomaterials, immobilization techniques, and amplification/detection strategies on the analytical performance of ECL based aptasensors. Moreover, several proof-of-concepts with appropriate figures and explanations have been shown to provide a general guide for the design of ECL aptasensors, and to stimulate further application of these ECL aptasensors. Finally, we conclude with the remaining challenges and opportunities to inspire further developments in ECL aptasensors.

A homogeneous assay for highly sensitive detection of CaMV35S promoter in transgenic soybean by förster resonance energy transfer between nitrogen-doped graphene quantum dots and Ag nanoparticles

In this work, a novel homogeneous assay for DNA quantitative analysis based on förster resonance energy transfer (FRET) was developed for cauliflwer mosaic virus 35s (CaMV35S) promoter of transgenic soybean detection. The homogenous FRET of fluorescence signal was fabricated by DNA hybridization with probe modified nitrogen-doped graphene quantum dots (NGQDs) and silver nanoparticles (AgNPs), which acted the donor-acceptor pairs for the first time. The highly efficient FRET and unique properties of the NGQDs made the proposed FRET system as a functionalized detection platform for labelling of DNA. Upon the recognition of specific target DNA (tDNA), the FRET between NGQDs and AgNPs was triggered to produce fluorescence quenching, which could be used for tDNA detection. The fabricated homogeneous FRET assay displayed a wide linear range of 0.1-500.0 nM and a low limit of detection 0.03 nM for the detection of CaMV35S (S/N = 3). This proposed biosensor revealed high specificity to detect tDNA, with acceptable intra-assay precision and excellent stability. This method was successfully applied to identify the real sample of 0.5% containing transgenic soybean, which achieved the most of national law regulations. This assay was further validated by polymerase chain reaction as the genetically modified organisms, suggesting that the proposed FRET system is a feasible tool for the further daily genetically modified organism detection.

Electrochemical, Electrochemiluminescence, and Photoelectrochemical Aptamer-Based Nanostructured Sensors for Biomarker Analysis

Aptamer-based sensors have been intensively investigated as potential analytical tools in clinical analysis providing the desired portability, fast response, sensitivity, and specificity, in addition to lower cost and simplicity versus conventional methods. The aim of this review, without pretending to be exhaustive, is to give the readers an overview of recent important achievements about electrochemical, electrochemiluminescence, and photoelectrochemical aptasensors for the protein biomarker determination, mainly cancer related biomarkers, by selected recent publications. Special emphasis is placed on nanostructured-based aptasensors, which show a substantial improvement of the analytical performances.

Electrochemiluminescence of Supramolecular Nanorods and Their Application in the "On-Off-On" Detection of Copper Ions

In this work, an "on-off-on" switch system has been successfully applied through the construction of an electrochemiluminscent biosensor for copper ion (Cu(2+) ) detection based on a new electrochemiluminescence (ECL) emitter of supramolecular nanorods, which was achieved through supramolecular interactions between 3,4,9,10-perylenetetracarboxylic acid (PTCA) and aniline. The initial "signal-on" state with strong and stable ECL emission was obtained by use of the supramolecular nanorods with a new signal amplification strategy involving a co-reaction accelerator. In addition, ECL quencher probes (Fc-NH2 /Cu-Sub/nano-Au) were fabricated by immobilizing aminoferrocene (Fc-NH2 ) on Cu-substrate strand modified Au nanoparticles. The quencher probes were hybridized with the immobilized Cu-enzyme strand to form Cu(2+) -specific DNAzyme. Similarly, the "signal-off" state was obtained by the high quenching effect of Fc-NH2 on the ECL of the excited-state PTCA ((1) PTCA*). As expected, the second "switch-on" state could achieved by incubating with the target Cu(2+) , owing to the Cu(2+) -specific DNAzyme, which was irreversibly cleaved, resulting in the release of the quencher probes from the sensor interface. Herein, on the basis of the ECL intensity changes (ΔIECL ) before and after incubating with the target Cu(2+) , the prepared Cu(2+) -specific DNAzyme-based biosensor was used for the determination of Cu(2+) concentrations with high sensitivity, excellent selectivity, and good regeneration.

Application of Europium Multiwalled Carbon Nanotubes as Novel Luminophores in an Electrochemiluminescent Aptasensor for Thrombin Using Multiple Amplification Strategies

A novel electrochemiluminescent (ECL) aptasensor was proposed for the determination of thrombin (TB) using exonuclease-catalyzed target recycling and hybridization chain reaction (HCR) to amplify the signal. The capture probe was immobilized on an Au-GS-modified electrode through a Au-S bond. Subsequently, the hybrid between the capture probe and the complementary thrombin binding aptamer (TBA) was aimed at obtaining double-stranded DNA (dsDNA). The interaction between TB and its aptamer led to the dissociation of dsDNA because TB has a higher affinity to TBA than the complementary strands. In the presence of exonuclease, aptamer was selectively digested and TB could be released for target recycling. Extended dsDNA was formed through HCR of the capture probe and two hairpin DNA strands (NH2-DNA1 and NH2-DNA1). Then, numerous europium multiwalled carbon nanotubes (Eu-MWCNTs) could be introduced through amidation reaction between NH2-terminated DNA strands and carboxyl groups on the Eu-MWCNTs, resulting in an increased ECL signal. The multiple amplification strategies, including the amplification of analyte recycling and HCR, and high ECL efficiency of Eu-MWCNTs lead to a wide linear range (1.0×10(-12)-5.0×10(-9) mol/L) and a low detection limit (0.23 pmol/L). The method was applied to serum sample analysis with satisfactory results.

Bare magnetic nanoparticles as fluorescence quenchers for detection of thrombin

Rapid and sensitive detection of thrombin has very important significance in clinical diagnosis. In this work, bare magnetic iron oxide nanoparticles (magnetic nanoparticles) without any modification were used as fluorescence quenchers. In the absence of thrombin, a fluorescent dye (CY3) labeled thrombin aptamer (named CY3-aptamer) was adsorbed on the surface of magnetic nanoparticles through interaction between a phosphate backbone of the CY3-aptamer and hydroxyl groups on the bare magnetic nanoparticles in binding solution, leading to fluorescence quenching. Once thrombin was introduced, the CY3-aptamer formed a G-quartet structure and combined with thrombin, which resulted in the CY3-aptamer being separated from the magnetic nanoparticles and restoration of fluorescence. This proposed assay took advantage of binding affinity between the CY3-aptamer and thrombin for specificity, and bare magnetic nanoparticles for fluorescence quenching. The fluorescence signal had a good linear relationship with thrombin concentration in the range of 1-60 nM, and the limit of detection for thrombin was estimated as low as 0.5 nM. Furthermore, this method could be applied for other target detection using the corresponding fluorescence labeled aptamer.

Target catalyzed hairpin assembly for constructing a ratiometric electrochemical aptasensor

In this paper, we develop a novel dual-signaling amplified aptasensor for protein detection via target-catalyzed hairpin assembly. Thrombin was chosen as a model target. This aptasensor contains two DNA hairpins termed as H1 and H2. H1, which is modified at its 3' ends with a methylene blue (MB), consists of the aptamer sequence of human thrombin. Meanwhile, H2 which is modified at its 3' ends with a ferrocene (Fc), is partially complementary to H1. Upon the addition of target protein, it can facilitate the opening of the hairpin structure of H1 and thus accelerate the hybridization between H1 and H2, the target protein can be displaced from hairpin H1 by hairpin H2 through a process similar to DNA branch migration. The released target found another H1 to trigger the cycle, resulting in the multiplication of the Fc confined near the GE surface and MB away from the GE surface. When IFc/IMB is used as the response signal for quantitative determination of thrombin, the detection limit (41 fM) is much lower than that by using either MB or Fc alone. This new dual-signaling aptasensor is readily regenerated and shows good response toward the target. Furthermore, this amplified aptasensor shows high selectivity toward its target protein. The clever combination of the functional DNA hairpin and the novel device achieved a ratiometric electrochemical aptasensor, which could be used as a simple, sensitive high repeatability and selective platform for target protein detection.

Label-free aptamer biosensor for thrombin detection based on functionalized graphene nanocomposites

A label-free and amplified electrochemical impedimetric aptasensor based on functionalized graphene nanocomposites (rGO-AuNPs) was developed for the detection of thrombin, which played a vital role in thrombosis and hemostasis. The thiolated aptamer and dithiothreitol (TBA15-DTT) were firstly immobilized on the gold electrode to capture the thrombin molecules, and then aptamer functionalized graphene nanocomposites (rGO-TBA29) were used to fabricate a sandwich sensing platform for amplifying the impedimetric signals. As numerous negative charges of TBA29 on the electrode repelled to the [Fe(CN)6](4-/3-) anions, resulting in an obvious amplified charge-transfer resistance (Rct) signal. The Rct increase was linearly proportional to the thrombin concentration from 0.3 to 50nM and a detection limit of 0.01nM thrombin was achieved. In addition, graphene could also be labeled with other probes via electrostatic or π-π stacking interactions to produce signals, therefore different detection methods expanding wide application could be used in this model.

Up-conversion fluorescence "off-on" switch based on heterogeneous core-satellite assembly for thrombin detection

NaGdF4: Yb, Er nanoparticles, with up-conversion (UC) fluorescence, were used for the first time to build an "off-on" switch based on Au core-UC satellites for thrombin detection. We fabricated the fluorescence sensor using thrombin aptamer modified Au core and complementary sequence modified UC satellites in liquid phase. With optimized assembled conditions, the yield of Au core-UC satellites achieved 80%. The fluorescence of UC nanoparticles quenched when satellite NP attached to Au core NP. Thrombin aptamer on the surface of Au core would bind to targets when thrombin existed in the system, then UC satellites were released and the quenched fluorescence recovered. The sensor showed high specificity for thrombin compared with other biomolecules and the limit of detection reached 3.5 fg/mL. Application of this sensor to detect targets in human serum also achieved satisfactory results. The purpose of this work was to build an ultrasensitive sensor based on Au core-UC satellites for thrombin detection in human serum to achieve diagnosis of diseases.

Bi-functionalized aptasensor for ultrasensitive detection of thrombin

A novel bi-functionalized aptasensor for thrombin detection was fabricated by using electrochemiluminescence (ECL) and electrochemical impedance spectroscopy (EIS) techniques. A thiol-terminated aptamer with 15 oligonucleotides was hybridized with its complementary oligonucleotides to form a double-stranded DNA (dsDNA). Then, the thiol-labeled dsDNA was assembled on a Au electrode via Au-S bond; the other distal of the dsDNA labeled with biotin was bound to QDs through a biotin-avidin conjugation. When thrombin is present in the detection solution, the aptamer can combine with thrombin, resulting in loss of CdSe QDs from the electrode surface and thereby decreasing the ECL intensity and increasing the impedance. The decreased ECL and increased EIS signals are logarithmically linear with respect to the concentration of thrombin. The linear range was 10(-10)-10(-3) μg mL(-1) (R=0.9924) for the ECL signal and 10(-10)-10(-1) μg mL(-1) (R=0.9875) for the EIS method with a common detection limit of 10(-10) μg mL(-1) (2.7 aM). In addition, the bi-functionalized aptasensor exhibited excellent selectivity, super sensitivity, a low detection limit and a wide linear range.

Highly specific detection of thrombin using an aptamer-based suspension array and the interaction analysis via microscale thermophoresis

A novel aptamer-based suspension array detection platform was designed for the sensitive, specific and rapid detection of human α-thrombin as a model. Thrombin was first recognized by a 29-mer biotinylated thrombin-binding aptamer (TBA) in solution. Then 15-mer TBA modified magnetic beads (MBs) captured the former TBA-thrombin to form an aptamer-thrombin-aptamer sandwich complex. The median fluorescence intensity obtained via suspension array technology was positively correlated with the thrombin concentration. The interactions between TBAs and thrombin were analyzed using microscale thermophoresis (MST). The dissociation constants could be respectively achieved to be 44.2 ± 1.36 nM (TBA1-thrombin) and 15.5 ± 0.637 nM (TBA2-thrombin), which demonstrated the high affinities of TBA-thrombin and greatly coincided with previous reports. Interaction conditions such as temperature, reaction time, and coupling protocol were optimized. The dynamic quantitative working range of the aptamer-based suspension array was 18.37-554.31 nM, and the coefficients of determination R(2) were greater than 0.9975. The lowest detection limit of thrombin was 5.4 nM. This method was highly specific for thrombin without being affected by other analogs and interfering proteins. The recoveries of thrombin spiked in diluted human serum were in the range 82.6-114.2%. This innovative aptamer-based suspension array detection platform not only exhibits good sensitivity based on MBs facilitating highly efficient separation and amplification, but also suggests high specificity by the selective aptamer binding, thereby suggesting the expansive application prospects in research and clinical fields.

An ON1–OFF–ON2 electrochemiluminescence response: combining the intermolecular specific binding with a radical scavenger

The electrochemiluminescence (ECL) technique was combined with the “ON¹–OFF–ON²” strategy based on the chemical reactions and specific binding among different small chemical compounds for the highly sensitive detection of nonelectroactive organophosphate pesticides.