Tailored carbon nanotube immunosensors for the detection of microbial contamination

Surface-functionalized PAN fiber membranes for the sensitive detection of airborne specific markers

PAN fibers are characterized by having a large surface-to-volume ratio and small pores, which are beneficial for applications in filtration and specific molecular detection systems. Naturally, larger items are filtered, and a lower ratio between specific and nonspecific binding is expected since small pores do not allow larger elements to penetrate through membranes; thus, nonspecific binding is enhanced. We prepared and tested fiber membranes (diameter cca 700 nm) functionalized with a specific antibody to prove that even microscopic systems such as bacteria could be specifically identified. In addition, we established a methodology that enabled the effective binding of bacteria in not only an aqueous environment but also air. Our data clearly prove that even large systems such as bacteria could be specifically identified by fiber membranes surface-functionalized with a specific antibody. This research opens the door to the construction of biosensors for the fast, inexpensive, and sensitive identification of airborne bacterial contaminants and other airborne pollutants.

The Development of a Specific Nanofiber Bioreceptor for Detection of Escherichia coli and Staphylococcus aureus from Air

Polluted air and the presence of numerous airborne pathogens affect our daily lives. The sensitive and fast detection of pollutants and pathogens is crucial for environmental monitoring and effective medical diagnostics. Compared to conventional detection methods (PCR, ELISA, metabolic tests, etc.), biosensors bring a very attractive possibility to detect chemicals and organic particles with the mentioned reliability and sensitivity in real time. Moreover, by integrating nanomaterials into the biosensor structure, it is possible to increase the sensitivity and specificity of the device significantly. However, air quality monitoring could be more problematic even with such devices. The greatest challenge with conservative and sensing methods for detecting organic matter such as bacteria is the need to use liquid samples, which slows down the detection procedure and makes it more difficult. In this work, we present the development of a polyacrylonitrile nanofiber bioreceptor functionalized with antibodies against bacterial antigens for the specific interception of bacterial cells directly from the air. We tested the presented novel nanofiber bioreceptor using a unique air filtration system we had previously created. The prepared antibody-functionalized nanofiber membranes for air filtration and pathogen detection (with model organisms E. coli and S. aureus) show a statistically significant increase in bacterial interception compared to unmodified nanofibers. Creating such a bioreceptor could lead to the development of an inexpensive, fast, sensitive, and incredibly selective bionanosensor for detecting bacterial polluted air in commercial premises or medical facilities.

Directed Evolution of Near-Infrared Serotonin Nanosensors with Machine Learning-Based Screening

In this study, we employed a novel approach to improve the serotonin-responsive ssDNA-wrapped single-walled carbon nanotube (ssDNA-SWCNT) nanosensors, combining directed evolution and machine learning-based prediction. Our iterative optimization process is aimed at the sensitivity and selectivity of ssDNA-SWCNT nanosensors. In the three rounds for higher serotonin sensitivity, we substantially improved sensitivity, achieving a remarkable 2.5-fold enhancement in fluorescence response compared to the original sequence. Following this, we directed our efforts towards selectivity for serotonin over dopamine in the two rounds. Despite the structural similarity between these neurotransmitters, we achieved a 1.6-fold increase in selectivity. This innovative methodology, offering high-throughput screening of mutated sequences, marks a significant advancement in biosensor development. The top-performing nanosensors, N2-1 (sensitivity) and L1-14 (selectivity) present promising reference sequences for future studies involving serotonin detection.

Recent advances and prospects in nanomaterials for bacterial sepsis management

Bacterial sepsis is a life-threatening condition caused by bacteria entering the bloodstream and triggering an immune response, underscoring the importance of early recognition and prompt treatment. Nanomedicine holds promise for addressing sepsis through improved diagnostics, nanoparticle biosensors for detection and imaging, enhanced antibiotic delivery, combating resistance, and immune modulation. However, challenges remain in ensuring safety, regulatory compliance, scalability, and cost-effectiveness before clinical implementation. Further research is needed to optimize design, efficacy, safety, and regulatory strategies for effective utilization of nanomedicines in bacterial sepsis diagnosis and treatment. This review highlights the significant potential of nanomedicines, including improved drug delivery, enhanced diagnostics, and immunomodulation for bacterial sepsis. It also emphasizes the need for further research to optimize design, efficacy, safety profiles, and address regulatory challenges to facilitate clinical translation.

A rapid abiotic/biotic hybrid sandwich detection for trace pork adulteration in halal meat extract

In this study, we prepared molecularly imprinted polymer nanogels with good affinity for the Fc domain of immunoglobulin G (IgG) using 4-(2-methacrylamidoethylaminomethyl) phenylboronic acid as a modifiable functional monomer for post-imprinting in-cavity modification of a fluorescent dye (F-Fc-MIP-NGs). A novel nanogel-based biotic/abiotic hybrid sandwich detection system for porcine serum albumin (PSA) was developed using F-Fc-MIP-NGs as an alternative to a secondary antibody for fluorescence detection and another molecularly imprinted polymer nanogel capable of recognizing PSA (PSA-MIP-NGs) as a capturing artificial antibody, along with a natural antibody toward PSA (Anti-PSA) that was used as a primary antibody. After incubation of PSA and Anti-PSA with F-Fc-MIP-NGs, the PSA/Anti-PSA/F-Fc-MIP-NGs complex was captured by immobilized PSA-MIP-NGs for fluorescence measurements. The analysis time was less than 30 min for detecting pork adulteration of 0.01 wt% in halal beef and lamb meats. The detection limit was comparable to that of frequently used immunoassays. Therefore, we believe that this method is a promising, sensitive, and rapid detection method for impurities in real samples and could be a simple, inexpensive, and rapid alternative to conventional methods that have cumbersome procedures of 4 hours or more.

Electrochemical Biosensors Based on Convectively Assembled Colloidal Crystals

Rapid, sensitive, selective and portable virus detection is in high demand globally. However, differentiating non-infectious viral particles from intact/infectious viruses is still a rarely satisfied sensing requirement. Using the negative space within monolayers of polystyrene (PS) spheres deposited directly on gold electrodes, we fabricated tuneable nanochannels decorated with target-selective bioreceptors that facilitate the size-selective detection of intact viruses. Detection occurred through selective nanochannel blockage of diffusion of a redox probe, [Fe(CN)6]3/4-, allowing a quantifiable change in the oxidation current before and after analyte binding to the bioreceptor immobilised on the spheres. Our model system involved partial surface passivation of the mono-assembled PS spheres, by silica glancing angle deposition, to confine bioreceptor immobilisation specifically to the channels and improve particle detection sensitivity. Virus detection was first optimised and modelled with biotinylated gold nanoparticles, recognised by streptavidin immobilised on the PS layer, reaching a low limit of detection of 37 particles/mL. Intact, label-free virus detection was demonstrated using MS2 bacteriophage (~23-28 nm), a marker of microbiological contamination, showing an excellent limit of detection of ~1.0 pfu/mL. Tuneable nanochannel geometries constructed directly on sensing electrodes offer label-free, sensitive, and cost-efficient point-of-care biosensing platforms that could be applied for a wide range of viruses.

Biosensors for wastewater-based epidemiology for monitoring public health

Public health is attracting increasing attention due to the current global pandemic, and wastewater-based epidemiology (WBE) has emerged as a powerful tool for monitoring of public health by analysis of a variety of biomarkers (e.g., chemicals and pathogens) in wastewater. Rapid development of WBE requires rapid and on-site analytical tools for monitoring of sewage biomarkers to provide immediate decision and intervention. Biosensors have been demonstrated to be highly sensitive and selective tools for the analysis of sewage biomarkers due to their fast response, ease-to-use, low cost and the potential for field-testing. This paper presents biosensors as effective tools for wastewater analysis of potential biomarkers and monitoring of public health via WBE. In particular, we discuss the use of sewage sensors for rapid detection of a range of targets, including rapid monitoring of community-wide illicit drug consumption and pathogens for early warning of infectious diseases outbreaks. Finally, we provide a perspective on the future use of the biosensor technology for WBE to enable rapid on-site monitoring of sewage, which will provide nearly real-time data for public health assessment and effective intervention.

Simple and Effective Approach to Prepare an Epoxy-Functionalized Polymer and Its Application for an Electrochemical Immunosensor

An epoxy-functionalized polymer based on a new skeleton has been prepared via an efficient method and it combined with aminated carbon nanotubes to form a new composite material. This new composite material was applied for the fabrication of an electrochemical immunosensor with good performance. The inexpensive and easily available IgG was used to test the performance of the prepared composite material. The levels of IgG were quantitatively analyzed using a differential pulse voltammetry detection system and the lowest detection limit was calculated to be 0.05 ng/mL. The detection system can also respond to IgG in the concentration range from 0.1 to 25 ng/mL.

Tailoring the performance of electrochemical biosensors based on carbon nanomaterials via aryldiazonium electrografting

Carbon nanomaterials (CNs) offer some of the most valuable properties for electrochemical biosensing applications, such as good electrical conductivity, wide electrochemical stability, high specific surface area, and biocompatibility. Regardless the envisioned sensing application, endowing CNs with specific functions through controlled chemical functionalization is fundamental for promoting the specific binding of the analyte. As a versatile and straightforward method of surface functionalization, aryldiazonium chemistry have been successfully used to accommodate in a stable and reproducible way different functionalities, while the electrochemical route has become the favourite choice since the deposition conditions can be readily controlled and adapted to the substrate. In particular, the modification of CNs by electrochemical reduction of aryl diazonium salts is established as a powerful tool which allows tailoring the chemical and electronic properties of the sensing platform. By outlining the stimulating results disclosed in the last years, this article provides not only a comprehensively review, but also a rational assessment on contribution of aryldiazonium electrografting in developing CNs-based electrochemical biosensors. Furthermore, some of the emerging challenges to be surpassed to effectively implement this methodology for in vivo and point of care analysis are also highlighted.

Fabrication of a sensitive label free electrochemical immunosensor for detection of prostate specific antigen using functionalized multi-walled carbon nanotubes/polyaniline/AuNPs

The aim of this research is to introduce a novel label free electrochemical immunosensor based on glassy carbon electrode (GCE) modified with carboxylated carbon nanotubes (COOH-MWCNTs)/polyaniline (PANI)/gold nanoparticles (AuNPs) for the detection of prostate specific antigen (PSA). The AuNPs were utilized as a connector for PSA antibody immobilization through NH₂ groups on antibody. Investigations on modified electrode surface were performed by FT-IR spectrum, scanning electron microscope (SEM) and energy dispersive X-ray spectroscopy (EDS) to evaluate the synthesized nanocomposite and modified electrode surface. As a sensitive analytical method for the detection of PSA, differential pulse voltammetry (DPV) was employed in different ranges of antigen concentration, 1.66 ag·mL^-1 to 1.3 ng·mL^-1. In addition, the detection limit was obtained 0.5 pg·mL^-1, from the linear relationship between antigen concentration log and peak current. Also, the proposed immunosensor was carried out for the determination of PSA in human serum samples, indicating recoveries ranging from 92 to 104%. Finally, it should be noted that the reproducibility and specificity, along with the stability of the present immunosensor were examined, and satisfactory findings were obtained, thus proving it as a promising PSA immunosensor.

Selective and sensitive fluorescence detection method for pig IgG based on competitive immunosensing strategy and magnetic bioseparation

A novel fluorescence detection method based on competitive immunoassay and magnetic bioseparation technique was developed and applied to the determination of pig immunoglobulin G (IgG) in serum samples. Core-shell structured Fe₃O₄@SiO₂ nanoparticles were synthesized by chemical coprecipitation, followed by functionalization with amino groups and immobilization of pig IgG antibodies. The synthesized Fe₃O₄@SiO₂-antibody nanoparticles were employed as the probe for the competitive immune recognition of the target antigens in samples and the antigens labeled with fluorescein isothiocyanate (FITC). After the magnetic separation of probes binding with these two types of antigens, fluorescence of the free FITC-labeled antigens was measured for the quantification of the target antigens, since the ratio of the FITC-labeled antigens in supernatant before and after the competitive immune recognition depends on the amount of the target antigens in sample, due to the competitive nature of the binding of the antibody for these two types of antigens. Under the optimal conditions, a linear relationship was obtained between the change of fluorescence intensity and the concentration of pig IgG in a range from 0.75 to 23.50 µg L^-1, with a detection limit (LOD) of 0.031 µg L^-1. With the facile-prepared probes, this fluorescence competitive method can provide a rapid, specific and highly sensitive immunoassay protocol for the determination of target proteins in complex matrix samples.

Nanostructured Electrochemical Biosensors for Label-Free Detection of Water- and Food-Borne Pathogens

The emergence of nanostructured materials has opened new horizons in the development of next generation biosensors. Being able to control the design of the electrode interface at the nanoscale combined with the intrinsic characteristics of the nanomaterials engenders novel biosensing platforms with improved capabilities. The purpose of this review is to provide a comprehensive and critical overview of the latest trends in emerging nanostructured electrochemical biosensors. A detailed description and discussion of recent approaches to construct label-free electrochemical nanostructured electrodes is given with special focus on pathogen detection for environmental monitoring and food safety. This includes the use of nanoscale materials such as nanotubes, nanowires, nanoparticles, and nanosheets as well as porous nanostructured materials including nanoporous anodic alumina, mesoporous silica, porous silicon, and polystyrene nanochannels. These platforms may pave the way toward the development of point-of-care portable electronic devices for applications ranging from environmental analysis to biomedical diagnostics.

Designer carbon nanotubes for contaminant removal in water and wastewater: A critical review

The search for effective materials for environmental cleanup is a scientific and technological issue of paramount importance. Among various materials, carbon nanotubes (CNTs) possess unique physicochemical, electrical, and mechanical properties that make them suitable for potential applications as environmental adsorbents, sensors, membranes, and catalysts. Depending on the intended application and the chemical nature of the target contaminants, CNTs can be designed through specific functionalization or modification processes. Designer CNTs can remarkably enhance contaminant removal efficiency and facilitate nanomaterial recovery and regeneration. An increasing number of CNT-based materials have been used to treat diverse organic, inorganic, and biological contaminants. These success stories demonstrate their strong potential in practical applications, including wastewater purification and desalination. However, CNT-based technologies have not been broadly accepted for commercial use due to their prohibitive cost and the complex interactions of CNTs with other abiotic and biotic environmental components. This paper presents a critical review of the existing literature on the interaction of various contaminants with CNTs in water and soil environments. The preparation methods of various designer CNTs (surface functionalized and/or modified) and the functional relationships between their physicochemical characteristics and environmental uses are discussed. This review will also help to identify the research gaps that must be addressed for enhancing the commercial acceptance of CNTs in the environmental remediation industry.

Ultrasensitive magnetic field-assisted surface plasmon resonance immunoassay for human cardiac troponin I

An ultrasensitive surface plasmon resonance (SPR) immunoassay was developed for the specific detection of human cardiac troponin I (cTnI), a principle diagnostic marker for myocardial damage. The thin gold film evaporated on a glass slate, which was employed as the SPR sensing film, was modified by hollow gold nanoparticles (HGNPs) and polydopamine (PDA) sequentially, and then was immobilized with antibodies for specific recognition of target analyte. Electronic coupling of the surface plasmon waves originating from the HGNPs and the gold film leads to the remarkable amplification of SPR response. The PDA film modified on the gold film via self-polymerization of dopamine (DA) facilitates the direct immobilization of capture antibodies (cAb). To separate and enrich the target analyte, PDA-wrapped magnetic multi-walled carbon nanotubes (MMWCNTs-PDA) were conjugated with detection antibodies (dAb) and used as the extracting agent for the magnetic extraction of cTnI in sample. Large surface area of MMWCNTs-PDA ensures its loading capacity for dAb, as well as its extraction efficiency for cTnI. By serving as the "vehicles" for fast delivering the concentrated analyte to the SPR sensing surface, MMWCNTs-PDA-dAb also overcomes the disadvantage of slow diffusion-limited mass transfer and matrix interference effect in regular patterns. The combination of the above improvements results in the significant sensitivity enhancement of the SPR immunoassay. The concentration of cTnI with minimum detectable SPR response obtained by the present assay is 1.25ngmL^-1, which is 1000-fold lower than that obtained by the traditional SPR immunoassay based on PDA-modified gold film.

Recent advances in nanomaterials for water protection and monitoring

Nanomaterials (NMs) for adsorption, catalysis, separation, and disinfection are scrutinized. NMs-based sensor technologies and environmental transformations of NMs are highlighted.

Simple and Versatile Detection of Viruses Using Anodized Alumina Membranes

A simple sensor for viral particles based on ionic conductivity through anodized alumina membranes was demonstrated using MS2 bacteriophage as an example. A facile two-point measuring scheme is geared toward realization using a computer's sound card input/output capabilities suitable for a fast and inexpensive point of care testing. The lowest detection concentration down to ~7 pfu/mL and a large dynamic range up to ~2000 pfu/mL were obtained due to physical optimization that included proper length and diameter for the pores, removing the oxide layer at the electrode, as well as the chemical optimization of covalent binding of antibodies to the pore's walls.

Impedimetric detection of pathogenic bacteria with bacteriophages using gold nanorod deposited graphite electrodes

Electrochemical impedance spectroscopy (EIS) is applied for the detection of bacteria using bacteriophages as a bioprobe together with gold nanorods (GNRs).

Electrochemical immunosensors and their recent nanomaterial-based signal amplification strategies: a review

In recent years, tremendous advances have been made in biosensors based on nanoscale electrochemical immunosensors for use in the fields of agriculture, food safety, biomedicine, quality control, and environmental and industrial monitoring.