Amplified electrochemical sensing of lead ion based on DNA-mediated self-assembly-catalyzed polymerization

Electrochemical real-time sensor for the detection of Pb(II) ions based on Ti3C2Tx MXene

Lead ions are especially harmful to human health, causing significant developmental and behavioral abnormalities even at small concentrations. In real-life samples, lead ions are present in mixtures with other metal ions, creating a challenge to detect it selectively at low quantities. To address these challenges, we prepared an electrochemical sensor based on delaminated Ti3C2Tx MXene, which can selectively detect low concentrations of Pb2+ in a solution containing other common metal ions. Cyclic voltammetry was applied as an electrochemical detection method. The proposed reaction mechanism involves a reversible transition between Pb2+ ions and PbO at the MXene-based layer. The sensitivity of the sensor towards Pb2+ ions and a limit of detection were determined. The sensor, as prepared, had a linear response range within 0.15-1.0 μM, with a sensitivity of 26.7 μA/μM and LOD value of 48.7 nM, which meets the requirements set by the World Health Organization.

Exploring Electrochemical Sensing for Fungicide Detection: Utilization of Newly Synthesized Oligomers

The determination of thiabendazole is crucial for ensuring food safety, environmental protection, and compliance with regulatory standards. Accurate detection helps prevent harmful exposure, ensuring the safety of agricultural products and safeguarding public health. Therefore, this study investigates the electrochemical sensing capabilities of newly synthesized oligo 3-amino-5-mercapto-1,2,4-triazole (oligo AMTa) using hydrogen tetrachloroaurate (III) (HAuCl4) as an oxidizing agent at room temperature for thiabendazole (TBZ) detection, employing a simple electrode fabrication process. The prepared oligo AMTa was thoroughly characterized using UV-visible spectroscopy, scanning electron microscopy (SEM), Energy Dispersive X-ray Analysis (EDAX), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), high-resolution mass spectroscopy (HR-MS), and Fourier-transform infrared spectroscopy (FT-IR) to confirm its oligomerization structure and properties. The IR spectrum of oligo AMTa reveals a new peak at 1449 cm-1, indicating the conversion of -NH2 groups to -N=N- groups during oligomerization, unlike AMTa. Additionally, the disappearance of the -SH group peak at 2615 cm-1 in oligo AMTa suggests an S-S linkage involvement in the oligomerization process. In the oligo AMTa XPS spectrum, the presence of C=N is displayed by a small peak at 287.3 eV, and oligomerization via -NH and N=N is confirmed by the lack of a 284.0 eV peak for C-C or C=C. Gold nanoparticle formation is not demonstrated by the 84.8 eV peak, which implies that the gold atom is not in the Au0 state. The HR-MS spectrum of oligo AMTa shows a peak at m/z 564.08, indicating a chain of five monomers, and another peak at m/z 435.03, confirming the presence of a tetrameric form of AMTa. After that, the GC electrode was directly linked to the oligo AMTa by the potentiodynamic method. SEM, electrochemical impedance spectroscopy (EIS), and cyclic voltammetry (CV) were all employed to confirm the fabrication of oligo AMTa. The SEM image illustrates the formation of a particlelike structure with a uniform size of the oligomer after cycling in 0.1 M H2SO4. After electrocycling, the size of the oligomer was reduced from 2.6 μm to 30 nm. The oligo AMTa-modified electrode possesses the highest electroactive surface area and electrical conductivity due to several key factors. First, the presence of amino (-NH2) and thiol (-SH) functional groups in AMTa enhances the surface coverage and density of electroactive sites, increasing the electroactive surface area. Additionally, the conjugated structure of AMTa facilitates efficient electron transfer, resulting in enhanced electrical conductivity compared to unmodified electrodes. Eventually, the electrochemical oxidation of TBZ occurred using the fabricated electrodes. The GC/oligo AMTa electrode exhibited a four-fold increase in oxidation current for TBZ compared to unmodified GC electrodes. This enhancement is due to the improved surface properties from the oligo AMTa modification, which significantly boosts TBZ adsorption through strong interactions like hydrogen bonding and π-π stacking. These interactions, along with the increased surface area and catalytic properties, facilitate effective electron transfer, resulting in a higher oxidation current. As an outcome, the film was employed to determine the sensitivity level of TBZ, and a LOD of 1.8 × 10-11 M (S/N = 3) was found. The straightforward method's practical utility was proven by measuring TBZ in tap water, water spinach, and pear juice samples. The comprehensive characterization of oligo AMTa provided insights into its interaction mechanisms with thiabendazole, contributing to the development of a reliable, cost-effective, and efficient sensor.

A review on I-III-VI ternary quantum dots for fluorescence detection of heavy metals ions in water: optical properties, synthesis and application

Heavy metal contamination remains a major threat to the environment. Evaluating the concentrations of heavy metals in water environments is a crucial step towards a viable treatment strategy. Non-cadmium photo-luminescent I-III-VI ternary QDs have attracted increasing attention due to their low toxicity and extraordinary optical properties, which have made them popular in biological applications. Recently, ternary I-III-VI-QDs have gained growing interest as fluorescent detectors of heavy metal ions in water. Here, we review the research progress of ternary I-III-VI QDs for the fluorescence detection of heavy metal ions in water. First, we summarize the optical properties and synthesis methodologies of ternary I-III-VI QDs. Then, we present various detection mechanisms involved in the fluorescence detection of heavy metal ions, which are mostly attributed to direct interaction between these unique QDs and the metal ions, seen in the form of fluorescence quenching and fluorescence enhancement. We also display the potential applications in environmental remediation such as water treatment and associated challenges of I-III-VI QDs in the fluorescence detection of Cu2+ and other metal ions.

Nucleic Acid Tests for Clinical Translation

Nucleic acids, including deoxyribonucleic acid (DNA) and ribonucleic acid (RNA), are natural biopolymers composed of nucleotides that store, transmit, and express genetic information. Overexpressed or underexpressed as well as mutated nucleic acids have been implicated in many diseases. Therefore, nucleic acid tests (NATs) are extremely important. Inspired by intracellular DNA replication and RNA transcription, in vitro NATs have been extensively developed to improve the detection specificity, sensitivity, and simplicity. The principles of NATs can be in general classified into three categories: nucleic acid hybridization, thermal-cycle or isothermal amplification, and signal amplification. Driven by pressing needs in clinical diagnosis and prevention of infectious diseases, NATs have evolved to be a rapidly advancing field. During the past ten years, an explosive increase of research interest in both basic research and clinical translation has been witnessed. In this review, we aim to provide comprehensive coverage of the progress to analyze nucleic acids, use nucleic acids as recognition probes, construct detection devices based on nucleic acids, and utilize nucleic acids in clinical diagnosis and other important fields. We also discuss the new frontiers in the field and the challenges to be addressed.

Label-free DNAzyme assays for dually amplified and one-pot detection of lead pollution

Lead pollution in water and soil often transfers to food, advocating tools for on-site detection of lead pollution to ensure both environmental and food safety. We proposed a label-free, dually amplified and homogeneous DNAzyme assay for sensitive and one-pot detection of lead pollution. Instead of using chemically modified DNA substrate, a structure-response digestion process was introduced to monitor Pb²⁺ presence-induced cleavage process of unlabeled substrate, further amplifying the response signals and eliminating the use of labeled DNA probes. The DNAzyme assay allowed to detect Pb²⁺ as low as 0.12 nM and endued a dynamic range from 0.1 nM to 30 nM. In addition, it can specifically identify Pb²⁺ among other metal ions. We demonstrated that the DNAzyme assay can precisely detect Pb²⁺ in tap water, milk and fish. Thus, the DNAzyme assay is promising for on-site monitoring lead pollution risk and ensuring environmental and food safety.

Supersensitive CeOx-based nanocomposite sensor for the electrochemical detection of hydroxyl free radicals

It is well known that an excess of hydroxyl radicals (˙OH) in the human body is responsible for oxidative stress-related diseases. An understanding of the relationship between the concentration of ˙OH and those diseases could contribute to better diagnosis and prevention. Here we present a supersensitive nanosensor integrated with an electrochemical method to measure the concentration of ˙OH in vitro. The electrochemical sensor consists of a composite comprised of ultrasmall cerium oxide nanoclusters (<2 nm) grafted to a highly conductive carbon deposited on a screen-printed carbon electrode (SPCE). Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were used to analyze the interaction between cerium oxide nanoclusters and ˙OH. The CV results demonstrated that this electrochemical sensor had the capacity of detecting ˙OH with a high degree of accuracy and selectivity, achieving a consistent performance. Additionally, EIS results confirmed that our electrochemical sensor was able to differentiate ˙OH from hydrogen peroxide (H2O2), which is another common reactive oxygen species (ROS) found in the human body. The limit of detection (LOD) observed with this electrochemical sensor was of 0.6 μM. Furthermore, this nanosized cerium oxide-based electrochemical sensor successfully detected in vitro the presence of ˙OH in preosteoblast cells from newborn mouse bone tissue. The supersensitive electrochemical sensor is expected to be beneficially used in multiple applications, including medical diagnosis, fuel-cell technology, and food and cosmetic industries.

An electrochemical aptasensor for lead ion detection based on catalytic hairpin assembly and porous carbon supported platinum as signal amplification

A novel electrochemical aptasensor for lead detection based on catalytic hairpin assembly and PtNPs@PCs as signal amplification.

Label-free potentiometric aptasensing platform for the detection of Pb2+ based on guanine quadruplex structure

Potentiometric aptasensors enhanced by integrating advanced nanomaterials are of particular interest for the detection of multiplex species (e.g., proteins, bacteria, micro-organisms) due to their low cost, ease of operation, and low detection limits. However, potentiometric detection of small ionic species aptasensors is still challenging. This article describes the first example of a label-free G-quadruplex-based potentiometric aptasensing platform for the detection of Pb²⁺. Polyion oligonucleotide-labeled gold nanoparticles (AuNPs-DNA) as probes are modified on Au electrode, providing high-density negative charge on the electrode surface. These signal-amplifying probes can selectively form G-quadruplexes with the presence of Pb²⁺ ions and reduce the negative charges on the electrode surface, hence achieving potentiometric detection of Pb²⁺ ions with high selectivity. The AuNPs-DNA-based aptasensor shows an acceptable sensitivity over a wide range from 10^-11 to 10^-6 M with a detection limit of 8.5 pM. Furthermore, confirmed by coupled plasma mass spectrometry, the sensing platform is capable of performing effective and accurate detection of Pb²⁺ level in real water samples. The presented aptasensor offers a fast, convenient, low-maintenance, and highly sensitive alternative for on-site water pollution detections.

QCM-nanomagnetic beads biosensor for lead ion detection

A QCM biosensor combined with NMBs has been proposed for Pb²⁺detection with a lower detection limit of 0.3 pM.

A resonance Rayleigh scattering sensor for detection of Pb2+ ions via cleavage-induced G-wire formation

A resonance Rayleigh scattering (RRS) aptasensor was fabricated for detection of Pb²⁺via hairpin-like label-free substrate and G-wire for signal amplification. A hairpin-like DNA substrate contains a sequence in the loop labeled with ribonucleobase A and c-myc sequence in the stem. When hybridized with 8-17 DNAzyme in the presence of Pb²⁺, the sequence in the loop was activated and cleaved. Hundreds of c-myc sequences departing from the 8-17 DNAzyme yield nanowires superstructure called G-wire in the presence of Mg²⁺. The polymer G-wire was demonstrated by the RRS spectrum, polyacrylamide gel electrophoresis, and AFM. The RRS intensity was enhanced by the product G-wires, and the RRS signal at 370nm was linear with the logarithm of Pb²⁺ concentration in the range of 2.0nM to 5.0μM. This method was selective for Pb²⁺ even coexisting with other metal ions at high concentrations and was successfully applied to the determination of Pb²⁺ in real samples. The aptasensor holds a great promise for universal RRS sensing platform for sensitive detection of various metal ions just by changing the sequence of the probe in the loop and DNAzyme.

Mimicking Horseradish Peroxidase and NADH Peroxidase by Heterogeneous Cu2+-Modified Graphene Oxide Nanoparticles

Cu²⁺-ion-modified graphene oxide nanoparticles, Cu²⁺-GO NPs, act as a heterogeneous catalyst mimicking functions of horseradish peroxidase, HRP, and of NADH peroxidase. The Cu²⁺-GO NPs catalyze the oxidation of dopamine to aminochrome by H₂O₂ and catalyze the generation of chemiluminescence in the presence of luminol and H₂O₂. The Cu²⁺-GO NPs provide an active material for the chemiluminescence detection of H₂O₂ and allow the probing of the activity of H₂O₂-generating oxidases and the detection of their substrates. This is exemplified with detecting glucose by the aerobic oxidation of glucose by glucose oxidase and the Cu²⁺-GO NP-stimulated chemiluminescence intensity generated by the H₂O₂ product. Similarly, the Cu²⁺-GO NPs catalyze the H₂O₂ oxidation of NADH to the biologically active NAD⁺ cofactor. This catalytic system allows its conjugation to biocatalytic transformations involving NAD⁺-dependent enzyme, as exemplified for the alcohol dehydrogenase-catalyzed oxidation of benzyl alcohol to benzoic acid through the Cu²⁺-GO NPs-catalyzed regeneration of NAD⁺.

Enzymatic oligomerization and polymerization of arylamines: state of the art and perspectives

The literature concerning the oxidative oligomerization and polymerization of various arylamines, e.g., aniline, substituted anilines, aminonaphthalene and its derivatives, catalyzed by oxidoreductases, such as laccases and peroxidases, in aqueous, organic, and mixed aqueous organic monophasic or biphasic media, is reviewed. An overview of template-free as well as template-assisted enzymatic syntheses of oligomers and polymers of arylamines is given. Special attention is paid to mechanistic aspects of these biocatalytic processes. Because of the nontoxicity of oxidoreductases and their high catalytic efficiency, as well as high selectivity of enzymatic oligomerizations/polymerizations under mild conditions-using mainly water as a solvent and often resulting in minimal byproduct formation-enzymatic oligomerizations and polymerizations of arylamines are environmentally friendly and significantly contribute to a "green" chemistry of conducting and redox-active oligomers and polymers. Current and potential future applications of enzymatic polymerization processes and enzymatically synthesized oligo/polyarylamines are discussed.

In situ amplified electrochemical aptasensing for sensitive detection of adenosine triphosphate by coupling target-induced hybridization chain reaction with the assembly of silver nanotags

Biomolecular immobilization and construction of the sensing platform are usually crucial for the successful development of a high-efficiency detection system. Herein we report on a novel and label-free signal-amplified aptasensing for sensitive electrochemical detection of small molecules (adenosine triphosphate, ATP, used in this case) by coupling with target-induced hybridization chain reaction (HCR) and the assembly of electroactive silver nanotags. The system mainly consisted of two alternating hairpin probes, a partial-pairing trigger-aptamer duplex DNA and a capture probe immobilized on the electrode. Upon target ATP introduction, the analyte attacked the aptamer and released the trigger DNA, which was captured by capture DNA immobilized on the electrode to form a newly partial-pairing double-stranded DNA. Thereafter, the exposed domain at trigger DNA could be utilized as the initator strand to open the hairpin probes in sequence, and propagated a chain reaction of hybridization events between two alternating hairpins to form a long nicked double-helix. The electrochemical signal derived from the assembled silver nanotags on the nicked double-helix. Under optimal conditions, the electrochemical aptasensor could exhibit a high sensitivity and a low detection limit, and allowed the detection of ATP at a concentration as low as 0.03 pM. Our design showed a high selectivity for target ATP against its analogs because of the high-specificity ATP-aptamer reaction, and its applicable for monitoring ATP in the spiking serum samples. Improtantly, the distinct advantages of the developed aptasensor make it hold a great potential for the development of simple and robust sensing strategies for the detection of other small molecules by controlling the apatmer sequence.