Gold nanoclusters–Cu2+ ensemble-based fluorescence turn-on and real-time assay for acetylcholinesterase activity and inhibitor screening

A simple fluorescence detection of acetylcholinesterase with peroxidase-like catalysis from iodide

Acetylcholinesterase (AChE) is an important enzyme in the central and peripheral nervous system that regulates the balance of the neurotransmitter acetylcholine. In this work, a simple, selective and sensitive fluorescence assay was developed toward AChE activity. A conventional AChE substrate acetylthiocholine iodide (ATCI) was applied. Instead directly rendering a signaling, it was found that free iodide ions was released during the enzymatic hydrolysis of ATCI. These ions further catalyzed the oxidation of non-emissive o-phenylenediamine (OPD) into a fluorescent product. This gave a response differed from frequently-adopted sulfhydryl- -based signals and thus minimized related interferences. All materials included in this process were directly available and no additional syntheses were required. Due to the extra iodide-based catalysis included, this scheme was capable of providing a sensitive response toward AChE in the range of 0.01-8 U/L, with a limit of detection at 0.006 U/L. This method was further extended onto chlorpyrifos as an exemplary AChE inhibitor, with a detection down to 3 pM.

A cellulosic multi-bands fluorescence probe for rapid detection of pH and glutathione

The detection of pH and glutathione (GSH) is positively significant for the cell microenvironment imaging. Here, to assess the pH value and the concentration of GSH efficiently and visually, a cellulose-based multi-bands ratiometric fluorescence probe was designed by assembling MnO2-modified cellulose gold nanoclusters, fluorescein isothiocyanate-grafted cellulose nanocrystals (CNCs) and protoporphyrin IX-modified CNCs. The probe exhibits GSH-responsive, pH-sensitive and GSH/pH-independent fluorescent properties at 440 nm, 520 nm, and 633 nm, respectively. Furthermore, the probe identifies GSH within 4 s by degrading MnO2 into Mn2+ in response to GSH. Ingeniously, the green fluorescence of the probe at 520 nm was decreased with pH, and the red fluorescence at 633 nm remained stable. Therefore, the probe displayed distinguishing fluorescence colors from pink to blue and from green to blue for the synchronous detection of pH and GSH concentration within 4 s. The design strategy provides insights to construct multi-bands fluorescence probes for the rapid detection of multiple target analytes.

Biomimetic mineralization-based In situ growth of AuNCs@ZIF-8 on paper fibers for visual detection of copper ions

As one of the essential trace elements in life activities, copper ion (Cu2+) plays a very important role in human health. However, copper-containing pesticides are usually used for sterilization and disinfestation in agriculture. Thus, the residues of copper-containing pesticides in agricultural samples increase the risk of excessive intake of Cu2+ for human. The development of an effective method for detecting Cu2+ is still an important task. Herein, a detecting system based on AuNCs@ZIF-8 modified paper and smartphone platform was developed for visual detection of Cu2+ in agricultural samples. Herein, a detecting system based on AuNCs@ZIF-8 modified paper and smartphone platform was developed for visual detection of Cu2+ in agricultural samples. In the detecting system, gold nanoclusters (AuNCs) were packaged by ZIF-8 to limit their molecular motion and enhance the fluorescence effectively. In the meanwhile, by ultrasound-assisted biomimetic mineralizing, AuNCs@ZIF-8 composites were uniformly synthesized in situ on the surface of the paper fibers to indicate Cu2+ by fluorescence quenching. A portable visual monitoring system consisted of the prepared Cu2+ paper sensor and a smartphone platform was then successfully built and applied to on site detecting Cu2+ in agricultural samples. The limit of detection (LOD) was 4.57 μM and recovery rate varied from 96.50 % to 121.58 %. The developed detecting system for Cu2+ has the advantages of easy preparation and operation, and is very suitable for the use in agricultural products and farmland.

Encapsulating gold nanoclusters into metal-organic frameworks to boost luminescence for sensitive detection of copper ions and organophosphorus pesticides

Gold nanoclusters (Au NCs) with luminescence property are emerging as promising candidates in fluorescent methods for monitoring contaminants, but low luminescence efficiency hampers their extensive applications. Herein, GSH-Au NCs@ZIF-8 was designed by encapsulating GSH-Au NCs with AIE effect into metal-organic frameworks, achieving high luminescence efficiency and good stability through the confinement effect of ZIF-8. Accordingly, a fluorescent sensing platform was constructed for the sensitive detection of copper ions (Cu²⁺) and organophosphorus pesticides (OPs). Firstly, the as-prepared GSH-Au NCs@ZIF-8 could strongly accumulate Cu²⁺ due to the adsorption property of MOFs, accompanied by a significant fluorescence quenching effect with a low detection limit of 0.016 μM for Cu²⁺. Besides, thiocholine (Tch), the hydrolysis product of acetylthiocholine (ATch) by acetylcholinesterase (AchE), could coordinate with Cu²⁺ by sulfhydryl groups (-SH), leading to a significant fluorescence recovery, which was further used for the quantification of OPs owing to its inhibition to AChE activity. Furthermore, a hydrogel sensor was explored to accomplish equipment-free, visual, and quantitative monitoring of Cu²⁺ and OPs by a smartphone sensing platform. Overall, this work provides an effective and universal strategy for enhancing the luminescence efficiency and stability of Au NCs, which would greatly promote their applications in contaminants monitoring.

Quantitative detection of captopril in urine by smartphone-assisted ratiometric fluorescence sensing platform

Captopril (CP) is a widely used antihypertensive drug. In this study, a smartphone-assisted sensing platform on the basis of ratiometric fluorescent test strips was developed, which can accomplish visualization for the quantitative detection of captopril. Ratiometric fluorescent probe was constructed from carbon dots (CDs) and gold nanoclusters (Au NCs). After adding Cu²⁺ to fluorescent probe, Cu²⁺ can complex the amino and carboxyl groups on the surface of Au NCs and aggregate Au NCs, which will quench the fluorescence of Au NCs. Compared with amino and carboxyl groups, -SH in CP has a higher affinity for Cu²⁺ and can capture Cu²⁺ to restore Au NCs fluorescence. In this process, CDs remained essentially unchanged as background fluorescence. As CP concentration increased, the fluorescence color showed a distinct change from blue to purple to orange. Based on this principle, a sensing platform combining smartphone and fluorescent test strips was constructed to visualize the quantitative detection of CP by RGB values. Under optimal conditions, the wide linear range of CP detection for both fluorescence spectrometer and smartphone paper-based sensing platform was 0.25-50 μM. The limits of detection were as low as 76 nM and 101.3 nM, respectively. Furthermore, it was implemented successfully for the detection of CP in urine. The satisfactory recoveries were 96.0-103.3% and 92.0-108.0% for fluorescence spectrometer and smartphone platform, respectively. This smartphone-assisted platform provided a new approach for visual detection of CP, which showed its great potential in bioanalytical assays.

Enzyme-free and rapid visual quantitative detection for pesticide residues utilizing portable smartphone integrated paper sensor

Serious toxicity for organisms from pesticide glyphosate (Gly) residues to the ecosystem and human health has become a consensus. Rapid and selective detection of glyphosate, especially using a simple and portable instrument, is highly desired. In this work, we develop a novel enzyme-free rapid and visual ratiometric fluorescence sensor for selectively quantitative detecting glyphosate by integrating the designed blue carbon nanodots (CDs) and gold nanoclusters (Au NCs). The fluorescence of CDs can be quickly quenched via aggregation-caused quenching (ACQ) within 2 s after introducing glyphosate, resulting from the formation of CDs-Gly-CDs complex aggregation. While the Au NCs serve as the reference signal without any change, therefore leading to obvious and instant ratiometric fluorescence variation from blue to pink to orange. The broad linear range was obtained from 0 to 180 nM with a satisfactory detection limit of 4.19 nM. Furthermore, this approach was successfully applied to detect glyphosate in real samples and a portable smartphone platform integrated paper sensor was developed for in-site visual quantitative glyphosate detection, offering a promising strategy for the construction of enzyme-free trace hazard detection system.

A highly sensitive and selective ratiometric sensing platform based on 7-amino-4-methylcoumarin for naked-eye visual fluorescence sensing of Cu2

Cu²⁺ is a major environmental pollutant. An efficient measurement for Cu²⁺ is urgently needed. In this report, we have developed a new sensitive and selective ratiometric sensing platform using 7-amino-4-methylcoumarin (AMC) for detecting Cu²⁺ in real samples. In the presence of Cu²⁺, o-phenylenediamine (OPD) could be catalytically oxidized to 2,3-diaminophenazine (DAP), which could react with AMC, leading to quench the fluorescence intensity of AMC at 438 nm. Meanwhile, DAP provided a new emission peak at 557 nm. Based on the efficient overlapped spectrum of AMC and DAP, a ratiometric sensing platform through fluorescence resonance energy transfer (FRET) was carried out. Furthermore, the as-proposed strategy displayed the linear relationship in the wide range from 6 to 250 μM with a low detection limit of 0.059 μM, and the recoveries of the spiked samples in real samples ranged from 86.5% to 110.1%. Moreover, comparing the visual fluorescence colors of the real samples with the standard colorimetric card, we used the as-proposed strategy as a solid-based platform for realizing an efficient semi-quantitative detection of Cu²⁺ via naked-eye visual fluorescence mode without any complicated instrument and operation. The above results implied that the as-proposed strategy could be used in the practice determination of Cu²⁺.

Peroxidase-like activity of Ru-N-C nanozymes in colorimetric assay of acetylcholinesterase activity

Herein, the Ru-N-C nanozymes with abundant active Ru-N_x sites have been successfully prepared by pyrolyzing Ru(acac)₃ trapped zeolitic-imidazolate-frameworks (Ru(acac)₃@ZIF-8). Taking advantages of the remarkable peroxidase-mimicking activity, outstanding stability and reusability of Ru-N-C nanozymes, a novel biosensing system with explicit mechanism is strategically fabricated for sensitively determining acetylcholinesterase (AChE) and tacrine. The limit of detection for AChE activity can achieve as low as 0.0433 mU mL^-1, and the IC₅₀ value of tacrine for AChE is about 0.190 μmol L^-1. The robust analytical performance in serums test verifies the great application potential of this assay in real matrix. Furthermore, "INH" and "IMPLICATION-AND" logic gates are rationally constructed based on the proposed colorimetric sensor. This work not only provides one sustainable and effective avenue to fabricate Ru-N-C-based peroxidase mimic with high catalytic performance, and also gives new impetuses for developing novel biosensors by applying Ru-N-C-based enzyme mimics as substitutes for the natural enzyme.

Fluorine-free synthesis of Ti3C2 MQDs for smartphone-based fluorescent and colorimetric determination of acetylcholinesterase and organophosphorus pesticides

Ti₃C₂ MQDs were synthesized using an effective fluorine-free method with excitation/emission maxima at 390/490 nm and a fluorescence quantum yield of 11.78%. In contrast to the traditional, hazardous, and time-consuming process of HF pretreatment, our fluorine-free method is safe and simple. Acetylcholinesterase (AChE) could catalyze the hydrolysis of acetylthiocholine (ATCh) to produce thiocholine which was further reacted with Ehrman's reagent and decomposed to form a yellow product 2-nitro-5-thiobenate anion (TNB). Due to the obvious overlap between the excitation spectrum of Ti₃C₂ MQDs and the absorption spectrum of TNB, AChE catalyzed the hydrolysis of substrate DTNB/ATCh to form TNB, which can effectively quench the fluorescence of Ti₃C₂ MQDs through the inner filter effect (IFE). However, the presence of organophosphorus (OPs) inhibited the activity of AChE, leading to a less expressed IFE and increasing recovery of fluorescence. This was used for the quantification of OPs with a detection limit of 0.20 μg·L^-1. Moreover, with the constant increase of AChE activity, the color of the reaction system changed visibly from colorless to yellow, and then from yellow to colorless with further continuous addition of OPs. A colorimetric detection with a paper-based sensor of AChE activity and OP concentration was also fabricated by analyzing changes in RGB value using a smartphone APP. In this work, we proposed an effective fluorescence/colorimetric two-mode detection method, which opened a new horizon to detect other targets.

Tailored Biosensors for Drug Screening, Efficacy Assessment, and Toxicity Evaluation

Biosensors have been flourishing in the field of drug discovery with pronounced developments in the past few years. They facilitate the screening and discovery of innovative drugs. However, there is still a lack of critical reviews that compare the merits and shortcomings of these biosensors from a pharmaceutical point of view. This contribution presents a critical and up-to-date overview on the recent progress of tailored biosensors, including surface plasmon resonance, fluorescent, photoelectrochemical, and electrochemical systems with emphasis on their mechanisms and applications in drug screening, efficacy assessment, and toxicity evaluation. Multiple functional nanomaterials have also been incorporated into the biosensors. Representative examples of each type of biosensors are discussed in terms of design strategy, response mechanism, and potential applications. In the end, we also compare the results and summarize the major insights gained from the works, demonstrating the challenges and prospects of biosensors-assisted drug discovery.

Construction of Peroxidase-like Metal-Organic Frameworks in TiO2 Nanochannels: Robust Free-Standing Membranes for Diverse Target Sensing

The high cost and easy denaturation of natural enzymes under environmental conditions hinder their practical usefulness in sensing devices. In this study, peroxidase (POD)-like metal-organic frameworks (MOFs) were in situ grown in the nanochannels of an anodized TiO₂ membrane (TiO₂NM) as an electrochemical platform for multitarget sensing. By directly using a nanochannel wall as the precursor of metal nodes, Ti-MOFs were in situ derived on the nanochannel wall. Benefitting from the presence of bipyridine groups on the ligands, the MOFs in the nanochannels provide plenty of sites for Fe³⁺ anchoring, thus endowing the resulting membrane (named as Fe³⁺:MOFs/TiO₂NM) with remarkable POD-like activity. Such Fe³⁺-induced POD-like activity is very sensitive to thiol-containing molecules owing to the strong coordination effect of thiols on Fe³⁺. Most importantly, the POD-like activity of nanochannels can be in situ characterized by the current-potential (I-V) properties via catalyzing the oxidation of 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonate) (ABTS) substrate to the corresponding positively charged product ABTS^•+. As a proof-of-concept application, the free-standing POD-like membranes were applied as a label-free assay in sensing cysteine, as well as monitoring acetylcholinesterase (AChE) activity through the generated thiol-containing product. Furthermore, based on the toxicity effect of organophosphorus (OP) compounds on AChE, the robust membranes were successfully utilized to evaluate the toxicity of diverse OP compounds. The POD-like nanochannels open up an innovative way to expand the application of nanochannel-based electrochemical sensing platforms in drug inspection, food safety, and environmental pollution.

Gold nanoclusters: An ultrasmall platform for multifaceted applications

Gold nanoclusters (Au NCs) with a core size below 2 nm form an exciting class of functional nano-materials with characteristic physical and chemical properties. The properties of Au NCs are more prominent and extremely different from their bulk counterparts. The synthesis of Au NCs is generally assisted by template or ligand, which impart excellent cluster stability and high quantum yield. The tunable and sensitive physicochemical properties of Au NCs open horizons for their advanced applications in various interdisciplinary fields. In this review, we briefly summarize the solution phase synthesis and origin of the characteristic properties of Au NCs. A vast review of recent research work introducing biosensors based on Au NCs has been presented along with their specifications and detection limits. This review also highlights recent progress in the use of Au NCs as bio-imaging probe, enzyme mimic, temperature sensing probe and catalysts. A speculation on present challenges and certain future prospects have also been provided to enlighten the path for advancement of multifaceted applications of Au NCs.

Band-pass filter-assisted ratiometric fluorescent nanoprobe composed of N-(2-aminoethyl-1,8-naphthalimide)-functionalized gold nanoclusters for the determination of alkaline phosphatase using digital image analysis

A smartphone-based dual-wavelength digital imaging platform containing red (539-695 nm) and blue (389-511 nm) band-pass filters was developed for point-of-care (POC) testing of alkaline phosphatase (ALP) activity. The platform was based on dual-emitting fluorescent nanohybrids (AuNC@NAN), the ratiometric probe, which had a fluorescence "on-off-on-off" response. The probe comprised red-emitting gold nanoclusters (AuNCs) acting as the signal report units and blue-emitting N-(2-aminoethyl-1,8-naphthalimide) (NAN) acting as an internal reference. The different responses of the ratiometric probes resulted in a continuous color-multiplexing change from pink-red to dark-purple upon exposure to ALP. The dual-wavelength digital imaging platform was employed to acquire images of AuNC or NAN fluorescence signals without the influence of background light. Unlike the classical one-time digital imaging mode, the accurate red (R) and blue (B) channel values of the generated images can help to directly judge or eliminate the disturbance from unavoidable interfering factors. The R/B values were successfully employed for determining the ALP activity at a range 2.0 to 35.0 mU·mL^-1 with the detection limit of 1.04 mU·mL^-1. Such sensing imaging platform is also successful in determining ALP activity in human serum with 94.9-105% recoveries and relative standard deviation in the range 4.2-5.6%. A novel dual-wavelength smartphone-based digital imaging platform was proposed for simultaneous readout of the reporting and internal reference signals from dual-emitting ratiometric fluorescence probes, which allowed us to the accurate, reliable, and highly sensitive assay of ALP activity in complex samples.

Colorimetric detection of acetylcholinesterase and its inhibitor based on thiol-regulated oxidase-like activity of 2D palladium square nanoplates on reduced graphene oxide

A convenient and sensitive colorimetric assay for acetylcholinesterase (AChE) and its inhibitor has been designed based on the oxidase-like activity of {100}-faceted Pd square nanoplates which are grown in situ on reduced graphene oxide (PdSP@rGO). PdSP@rGO can effectively catalyze the oxidation of colorless 3,3',5,5'-tetramethylbenzidine (TMB) without the assistance of H₂O₂ to generate blue oxidized TMB (oxTMB) with a characteristic absorption peak at 652 nm. In the presence of AChE, acetylthiocholine (ATCh), a typical AChE substrate, is hydrolyzed to thiocholine (TCh). The generated TCh can effectively inhibit the PdSP@rGO-triggered chromogenic reaction of TMB via cheating with Pd, resulting in color fading and decrease in absorbance. Thus, a sensitive probe for AChE activity is constructed with a working range of 0.25-5 mU mL^-1 and  a limit of detection (LOD) of 0.0625 mU mL^-1. Furthermore, because of the inhibition effect of tacrine on AChE, tacrine is also detected through the colorimetric AChE assay system within the concentrations range 0.025-0.4 μM with a LOD of 0.00229 μM. Hence, a rapid and facile colorimetric procedure to sensitively detect AChE and its inhibitor can be anticipated through modulating the oxidase-like activity of PdSP@rGO. Colorimetric method for detection of AChE and its inhibitor is established by modulating the oxidase mimetic activity of {100}-faceted Pd square nanoplates on reduced graphene oxide (PdSP@rGO).

An OliGreen-responsive fluorescence sensor for sensitive detection of organophosphorus pesticide based on its specific selectivity towards T-Hg2+-T DNA structure

In this paper, it was found that OliGreen emitted much stronger fluorescence in rigid T-Hg²⁺-T DNA structure than that in the presence of poly T. Thus, an OliGreen-responsive label-free fluorescent sensor was proposed for sensitive detection of organophosphorus pesticides (OPs) by constructing T-Hg²⁺-T DNA structure. OliGreen emits strong fluorescence in T-Hg²⁺-T structures. The rigid DNA structure of T-Hg²⁺-T is prone to be destroyed by thiocholine (TCh) that hydrolyzed by acetylcholinesterase (AChE) because of the high affinity of TCh with Hg²⁺. As a result, T-Hg²⁺-T DNA structure broke down and the fluorescence intensity of OliGreen decreased greatly. With the inhibition of AChE by OPs, fluorescence intensity of OliGreen remained strong because of the rigid T-Hg²⁺-T DNA structure. Thus, a "turn-on" fluorescent sensor which avoids synthesis of nanomaterials and complex label procedures is proposed based on the fluorescence intensity of OliGreen. DDVP were detected with a wide linear range from 0.005 to 25.0 ng/mL and the detection limit was 2.9 pg/mL, which is more sensitive than previously reported methods.

Rare-Earth Eu3+/Gold Nanocluster Ensemble-Based Fluorescent Photoinduced Electron Transfer Sensor for Biomarker Dipicolinic Acid Detection

The use of metal ions to bridge the fluorescent materials to target analytes has been demonstrated to be a promising way to sensor design. Herein, the effect of rare-earth ions on the fluorescence of l-methionine-stabilized gold nanoclusters (Met-AuNCs) was investigated. It was found that europium (Eu³⁺) can significantly suppress the emission of Met-AuNCs, while other rare-earth ions showed a negligible impact. The mechanism on the observed fluorescence quenching of Met-AuNCs triggered by Eu³⁺ was systematically explored, with results revealing the dominant role of photoinduced electron transfer (PET). Eu³⁺ can bind to the surface of Met-AuNCs by the coordination effect and accepts the electron from the excited Met-AuNCs, which results in Met-AuNC fluorescence suppression. After introducing dipicolinic acid (DPA), an excellent biomarker for spore-forming pathogens, Eu³⁺ was removed from the surface of Met-AuNCs owing to the higher binding affinity between Eu³⁺ and DPA. Consequently, an immediate fluorescence recovery occurred when DPA was present in the system. Based on the Met-AuNC/Eu³⁺ ensemble, we then established a simple and sensitive fluorescence strategy for turn-on determination of biomarker DPA, with a linear range of 0.2-4 μM and a low limit of detection of 110 nM. The feasibility of the proposed method was further validated by the quantitative detection of DPA in the soil samples. We believe that this study would significantly facilitate the construction of metal-ion-mediated PET sensors for the measurement of various interested analytes by applying fluorescent AuNCs as detection probes.

Colorimetric fluorescent paper strip with smartphone platform for quantitative detection of cadmium ions in real samples

Instrument-free, portable and direct read-out mini-devices have wider application prospects in various fields, especially for real-time/on-site detection in environmental science. Herein, a colorimetric fluorescent sensor for detecting cadmium ions (Cd²⁺) based on aggregation-induced emission (AIE) was established, fluorescent paper strips integrated with smartphone platform was further designed for the visualization, on-site and quantitative detection of Cd²⁺. The colorimetric fluorescent sensor was prepared by mixing orange emission glutathione-stabilized gold nanoclusters (AuNCs) with blue emission ethylenediamine functionalized graphene oxide (EDA-GO), and introducing copper ions (Cu²⁺) to quench the orange emission of AuNCs while the blue emission served as a background reference without color change. The Cd²⁺ can induce Cu²⁺-GSH-AuNCs to aggregation and emit orange fluorescence, causing the fluorescent color of the sensor changed from blue to red with the limit of detection (LOD) as low as 33.3 nM in solution. Moreover, fluorescent paper strips integrated with smartphone platform has a sensitive detection of Cd²⁺ with the LOD of 0.1 μM in rice samples. The method reported here might have great application prospects in real-time monitoring of foods safety and environmental protection.

Single-particle enumeration-based ultrasensitive enzyme activity quantification with fluorescent polymer nanoparticles

Acetylcholinesterase (AChE) plays a vital role in nerve conduction through rapidly hydrolyzing the neurotransmitter acetylcholine (ACh) and is correlated with Alzheimer's disease. In this work, a label-free single-particle enumeration (SPE) method for the quantitative detection of acetylcholinesterase (AChE) activity is developed. The design is based on the fluorescence resonance energy transfer (FRET) between fluorescent conjugated polymer nanoparticles (FCPNPs) and MnO2 nanosheets. The fluorescence of FCPNPs can be effectively quenched by MnO2 nanosheets via hydrogen bonding interaction. In the presence of acetylcholinesterase (AChE), acetylthiocholine (ATCh) could be hydrolyzed to thiocholine (TCh), which can reduce MnO2 to Mn2+ and trigger the decomposition of MnO2 nanosheets. As a result, the fluorescence of FCPNPs is restored. Taking advantage of the superior brightness and stable fluorescence emission from individual FCPNPs, the accurate quantification of AChE is achieved by statistically counting the fluorescent particles on the glass slide surface. A linear range from 5 to 1600 μU mL-1 is obtained for AChE assay and the limit-of-detection (LOD) is 1.02 μU mL-1, which is far below the spectroscopic measurements in bulk solution. In the human serum sample, satisfactory recovery efficiencies are determined in a range of 91.0%-103.0%. Furthermore, pesticide carbaryl as an inhibitor of AChE activity was detected. The LOD is 1.12 pg mL-1 with linear responses ranging from 5 to 300 pg mL-1, which demonstrates the feasibility of this approach for AChE inhibitor screening. As a consequence, the label-free SPE-based method affords a promising platform for the sensitive detection of target molecules in the future.

Fabricating an Acetylcholinesterase Modulated UCNPs-Cu2+ Fluorescence Biosensor for Ultrasensitive Detection of Organophosphorus Pesticides-Diazinon in Food

In this study, a highly sensitive upconversion fluorescence (FL) biosensor was developed for the detection of organophosphorus pesticides (OPs) based on an acetylcholinesterase (AChE) modulated FL "off-on-off" strategy. The luminescence of synthesized UCNPs could be quenched strongly by Cu²⁺ due to an energy transfer effect. Upon addition of AChE and acetylthiocholine (ATCh), the enzymatic hydrolysate (thiocholine) could seize Cu²⁺ from UCNPs-Cu²⁺ mixture, resulting in the quenched FL triggered on. OPs could irreversibly impede the activity of AChE, which caused the formation of thiocholine to decrease, thus, reduced the recovery of FL. Under the optimum conditions, a linear detection range from 0.1 to 50 ng/mL was achieved for the representative OPs (diazinon) with LOD of 0.05 ng/mL. Furthermore, the ability of the biosensor to detect OPs was also confirmed in adulterated environmental and agricultural samples. In validation analysis, the proposed sensor showed satisfactory results ( p > 0.05) with GC-MS.

Split aptamer based sensing platform for adenosine deaminase detection by fluorescence resonance energy transfer

In this paper, a split aptamer based fluorescence resonance energy transfer (FRET) platform was constructed for the determination of adenosine deaminase (ADA) activity by using gold nanoclusters (AuNCs) and gold nanoparticles (AuNPs). A single adenosine triphosphate (ATP) aptamer was split into two fragments (referred to as P1 and P2). P1 was covalently attached to the AuNCs at the 5' end (P1-AuNCs), and P2 was labeled with AuNPs at the 3' end (P2-AuNPs). In the presence of ATP, ATP bound with the two fragments with high affinity to link P1-AuNCs and P2-AuNPs together, thus the fluorescence of P1-AuNCs was quenched via FRET from P1-AuNCs to P2-AuNPs. With the addition of ADA, ATP was transformed into inosine triphosphate (ITP), and then P1 and P2 were released to cause the fluorescence recovery of the system. So a split aptamer based FRET platform for ADA detection can be established via the fluorescence intensity change of the system. This platform showed a good linear relationship between the fluorescence intensity and ADA concentration in the range of 2-120 U L^-1, and the limit of detection (LOD) was 0.72 U L^-1. Moreover, the detection of ATP in human serum sample demonstrated the accuracy and applicability of the method for ADA detection in real sample.

Gold nanocluster-based fluorescence sensing probes for detection of dipicolinic acid

A switched-on fluorescence sensing probe for the detection of dipicolinic acid (DPA) is demonstrated in this study.

A fluorometric sensing method for sensitive detection of trypsin and its inhibitor based on gold nanoclusters and gold nanoparticles

In this work, a facile, label-free, and sensitive fluorometric strategy for detection of trypsin and its inhibitor was established on the basis of the fluorescence resonance energy transfer (FRET) between mercaptoundecanoic acid functionalized gold nanoclusters (AuNCs) and gold nanoparticles (AuNPs) via protamine as a bridge. Protamine can trigger the aggregation of AuNPs and link AuNCs with aggregated AuNPs through electrostatic interaction. Compared with monodisperse AuNPs, the UV-vis absorption band of aggregated AuNPs overlapped considerably with the emission spectrum of AuNCs. Thus, the fluorescence of AuNCs was obviously quenched by the aggregated AuNPs through FRET. In the presence of trypsin, protamine was hydrolyzed into small fragments, leading to the deaggregation of AuNPs and breaking of the short distance between AuNPs and AuNCs, so the FRET process was inhibited, and the fluorescence of AuNCs was recovered. The increase in the fluorescence intensity of AuNCs was directly related to the amount of trypsin. Hence trypsin can be determined on the basis of the variation of fluorescence intensity, with a linear range of 5-5000 ng mL-1 and a detection limit of 1.9 ng mL-1. In addition, this system was used for the detection of trypsin inhibitor by application of the inhibitor isolated from soybean as a model. The sensing method was applied for trypsin detection in human urine and commercial multienzyme tablet samples with satisfactory results. Graphical abstract ᅟ.

Gold Nanoparticle-Based Photoluminescent Nanoswitch Controlled by Host-Guest Recognition and Enzymatic Hydrolysis for Arginase Activity Assay

The development of simple yet powerful methods for monitoring enzyme activity is of great significance. Herein, a facile, convenient, cost-effective, and continuous fluorescent method for the detection of arginase and its inhibitor has been reported based on a host-guest interaction-controlled and enzymatic hydrolysis-controlled luminescent nanoswitch. The fluorescence intensity of 6-aza-2-thiothymine-stabilized gold nanoparticle (ATT-AuNP) is enhanced by l-arginine, owing to the formation of a supramolecular host-guest assembly between the guanidine group of l-arginine and ATT molecules capped on the AuNP surface. However, hydrolysis of l-arginine, catalyzed by arginase, leads to a decrease in the fluorescence intensity of l-arginine/ATT-AuNPs hybrids. Upon incorporation of the arginase inhibitor l-norvaline, the fluorescence of the ATT-AuNP-based detecting system is restored. The linear range of arginase activity determination is from 0.0625 to 1.15 U/mL and the limit of detection is 0.056 U/mL. The half-maximal inhibition value IC₅₀ of l-norvaline is determined to be 5.6 mM. The practicability of this luminescent nanoswitch is validated by assaying the arginase activity in rat liver and monitoring the response of rat liver arginase to pharmacological agent. Compared to the existing fluorescent method of arginase activity assay, the approach demonstrated here does not involve any complicated technical manipulation, thereby greatly simplifying the detection steps. We propose that this AuNP-based luminescent nanoswitch would find wide applications in the field of life sciences and medicine.

BSA capped bi-functional fluorescent Cu nanoclusters as pH sensor and selective detection of dopamine

Illustration of the preparation of bi-functional BSA-CuNCs, the pH sensing and the detection of dopamine (DA).

Carbon dots for fluorescent detection of α-glucosidase activity using enzyme activated inner filter effect and its application to anti-diabetic drug discovery

Recently, α-glucosidase inhibitor has been widely used in clinic for diabetic therapy. In the present study, a facile and sensitive fluorescent assay based on enzyme activated inner filter effect (IFE) on nitrogen-doped carbon dots (CDs) was first developed for the detection of α-glucosidase. The N-doped CDs with green emission were prepared by a one-step hydrothermal synthesis and gave the fluorescence quantum yield of 30%, which were used as the signal output. Through α-glucosidase catalysis, 4-nitrophenol was released from 4-nitrophenyl-α-d-glucopyranoside (NGP). Interestingly, the absorption of 4-nitrophenol and the excitation of CDs were completely overlapping. Due to its great molar absorptivity, 4-nitrophenol was capable of acting as a powerful absorber to affect the fluorescent signal of CDs (i.e. IFE). By converting the absorption signals into fluorescence signals, the facile fluorescence assay strategy could be realized for α-glucosidase activity sensing, which effectively avoided the complex modification of the surface of CDs or construction of the nanoprobes. The established IFE-based sensing platform offered a low detection limit of 0.01 U/mL (S/N = 3). This proposed sensing approach has also been expanded to the inhibitor screening and showed excellent applicability. As a typical α-glucosidase inhibitor, acarbose was investigated with a low detection limit of 10^-8 M. This developed method enjoyed many merits including simplicity, lost cost, high sensitivity, good reproducibility and excellent selectivity, which also provided a new insight on the application of CDs to develop the facile and sensitive biosensor.

Oxidase-mimicking activity of ultrathin MnO2 nanosheets in colorimetric assay of acetylcholinesterase activity

In the present study, a novel colorimetric sensing platform was constructed for quantitative detection of acetylcholinesterase (AChE) activity and its inhibitor. Manganese dioxide (MnO₂) nanosheets as an oxidase-mimicking nanomaterial could directly oxidize 3,3',5,5'-tetramethylbenzidine (TMB) into oxTMB without the need for horseradish peroxidase and H₂O₂. When AChE was introduced, acetylthiocholine could be catalytically hydrolyzed to produce thiocholine, which easily triggers the decomposition of MnO₂ nanosheets, causing the decrease of solution absorbance. Owing to the inhibition effect of organophosphorus pesticides, the enzymatic activity was suppressed, preventing the decomposition of MnO₂ and resulting in the increase of absorbance. Under optimal conditions, the colorimetric platform shows sensitive responses to AChE and paraoxon in the range of 0.1-15 mU mL^-1 and 0.001-0.1 μg mL^-1, respectively. The detection limits of AChE and paraoxon reached 35 μU mL^-1 and 1.0 ng mL^-1, respectively. Furthermore, the MnO₂-TMB platform has been used to fabricate test strips for rapid and convenient visual detection of AChE and its inhibitor with highly promising performance.

Lanthanide coordination polymer nanoparticles as a turn-on fluorescence sensing platform for simultaneous detection of histidine and cysteine

A turn-on fluorescent sensor for simultaneous detection of histidine and cysteine based on lanthanide coordination polymer nanoparticles.

Thumb Imprint Based Detection of Hyperbilirubinemia Using Luminescent Gold Nanoclusters

Early and easy detection of diseases, using point-of-care and inexpensive devices, not only provides option for early treatment but also reduces the risk of propagation. Herein we report the fabrication of a robust film based luminescence indicator of bilirubin, which can indicate hyperbilirubinemia through the thumb imprint of the patient. The UV-light induced luminescence intensity of the film, made out of chitosan stabilised gold (Au) nanoclusters, which was effectively quenched in the presence of Cu²⁺ ions, recovered in the presence of bilirubin from skin or blood serum. Moreover, the sensitivity of detection of bilirubin was tuneable with the amount of Cu²⁺ added, thereby facilitating the detection of the desired concentration range of bilirubin.

Carbon dots-assisted colorimetric and fluorometric dual-mode protocol for acetylcholinesterase activity and inhibitors screening based on the inner filter effect of silver nanoparticles

Dual-readout (colorimetric and fluorometric) protocol based on AgNPs and fluorescent CD, amenable to rapid, ultrasensitive assay of AChE activity and its inhibitors.

Development of a biosensing system for tacrine based on nitrogen-doped graphene quantum dots and acetylcholinesterase

The graphene quantum dot-based sensor is sensitive to reaction products resulting from acetylcholinesterase activity and it allows for the determination of tacrine acting as an enzyme inhibitor.