A self-enhanced electrochemiluminescence immunosensor based on l-Lys-Ru(dcbpy)32+ functionalized porous six arrises column nanorods for detection of CA15-3

An electrochemically synthesized molecularly imprinted polymer for highly selective detection of breast cancer biomarker CA 15-3: a promising point-of-care biosensor

In this study, a molecularly imprinted polymer film (MIP) was prepared on the surface of a disposable carbon screen-printed electrode (C-SPE) using (3-acrylamidopropyl)trimethylammonium chloride (AMPTMA) as a functional monomer and the cancer biomarker carbohydrate antigen 15-3 (CA 15-3) as a template. The MIP was synthesized by in situ electropolymerization (ELP) of the AMPTMA monomer in the presence of the CA 15-3 protein on the C-SPE surface. The target was subsequently removed from the polymer matrix by the action of proteinase K, resulting in imprinted cavities with a high affinity for CA 15-3. Electrochemical techniques such as cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were used to characterize the different phases of the sensor assembly. Chemical and morphological analysis was performed using RAMAN and scanning electron microscopy (SEM). CA 15-3 was successfully detected in a wide working range from 0.001 U mL-1 to 100 U mL-1 with a correlation coefficient (R2) of 0.994 in 20 min. The MIP sensor showed minimal interference with other cancer proteins (CEA and CA 125). Overall, the developed device provides a rapid, sensitive, and cost-effective response in the detection of CA 15-3. Importantly, this comprehensive approach appears suitable for point-of-care (PoC) use, particularly in a clinical context.

Novel sensor for the determination of CA 15-3 in serum of breast cancer patients based on Fe-gallic acid complex doped in modified cellulose polymer thin films

Fe-gallic acid MOF embedded in an epoxy methyl cellulose polymer (CMC) thin film was synthesized and characterized by different micro-analytical tools such as: FE-SEM/EDX, XPS analysis, XRD analysis, FT-IR, and fluorescence spectroscopy. Fe-gallic acid MOF doped in a stable CMC polymer thin film is used as a novel sensor to identify CA 15-3 in the sera of patients suffering breast malignancy. The presence of appropriate functional groups in aqueous CA 15-3 solutions enables it to interact with the Fe-gallic acid MOF embedded in the thin film. The Fe-gallic acid MOF was found to absorb energy at 350 nm (λex) and emits radiation at 439 nm which was specifically quenched in the presence of CA 15-3 over a working concentration range of 0.05-570 U mL-1. In contrast to other CA 15-3 detection methods which suffered from electronic noise, interference and slowness, the Fe-gallic acid MOF proved its sensitivity as an economic, stable and reliable probe for the detection and determination of CA 15-3 in patients' serum samples with a detection limit of 0.01 U mL-1 at pH 7.2.

Highly stable Ru-complex-based metal-covalent organic frameworks as novel type of electrochemiluminescence emitters for ultrasensitive biosensing

Developing novel types of high-performance electrochemiluminescence (ECL) emitters is of great significance for constructing ultrasensitive ECL sensors. Herein, a highly stable metal-covalent organic framework (MCOF), termed Ru-MCOF, has been devised and synthesized by employing a classic ECL luminophore, tris(4,4'-dicarboxylicacid-2,2'-bipyridyl)ruthenium(II) (Ru(dcbpy)₃²⁺), as building unit and applied as a novel ECL probe to construct an ultrasensitive ECL sensor for the first time. Impressively, the topologically ordered and porous architectures of the Ru-MCOF not only allow Ru(bpy)₃²⁺ units to precisely locate and homogeneously distribute in the skeleton via strong covalent bonds but also facilitate the transport of co-reactants and electrons/ions in channels to promote the electrochemical activation of both external and internal Ru(bpy)₃²⁺ units. All these features endow the Ru-MCOF with excellent ECL emission, high ECL efficiency, and outstanding chemical stability. As expected, the constructed ECL biosensor based on the Ru-MCOF as a high-efficiency ECL probe accomplishes the ultrasensitive detection of microRNA-155. Overall, the synthesized Ru-MCOF not only enriches the MCOF family but also displays excellent ECL performance and thus expands the application of MCOFs in bioassays. Considering the structural diversity and tailorability of MCOFs, this work opens a new horizon to design and synthesize high-performance ECL emitters, therefore paving a new way to develop highly stable and ultrasensitive ECL sensors and motivating further research on MCOFs.

Electrochemiluminescence nanoemitters for immunoassay of protein biomarkers

The family of electrochemiluminescent luminophores has witnessed quick development since the electrochemiluminescence (ECL) phenomenon of silicon nanoparticles was first reported in 2002. Moreover, these developed ECL nanoemitters have extensively been applied in sensitive detection of protein biomarker by combining with immunological recognition. This review firstly summarized the origin and development of various ECL nanoemitters including inorganic and organic nanomaterials, with an emphasis on metal-organic frameworks (MOFs)-based ECL nanoemitters. Several effective strategies to amplify the ECL response of nanoemitters and improve the sensitivity of immunosensing were discussed. The application of ECL nanoemitters in immunoassay of protein biomarkers for diagnosis of cancers and other diseases, especially lung cancer and heart diseases, was comprehensively presented. The recent development of ECL imaging with the nanoemitters as ECL tags for detection of multiplex protein biomarkers on single cell membrane also attracted attention. Finally, the future opportunities and challenges in the ECL biosensing field were highlighted.

Preparation of a disposable electrochemiluminescence sensor chip based on an MXene-loaded ruthenium luminescent agent and its application in the detection of carcinoembryonic antigens

We developed a novel type of disposable ECL sensor chip for CEA detection in serum samples of healthy humans and cancer patients. The disposable ECL sensor chip has many advantages including convenience, rapid detection, low cost, and easy mass production.

Multifunctional bacteria-derived tags for advancing immunoassay analytical performance with dual-channel switching and antibodies bioactivity sustaining

Constructing multifunctional immunochromatographic assays (ICA) carriers with multiple signals and retaining bioactivity of monoclonal antibodies (mAbs) are conducive to the sensitive and accurate point-of-care testing (POCT). To fulfill this pressing need, a microorganism-based microsphere mediated dual-modal ICA (DICA) was developed for sensitive and reliable detection of zearalenone (ZEN). As the key to the biosensor, a superb biotag with an intact coccus morphology was designed based on Staphylococcus aureus biosynthesized quantum dots incorporating Ru(bpy)₃²⁺ (SAQDsRu), in which SA offered a specific recognition capacity for Fc region of mAbs, QDs endowed a naked-eye discernible colorimetric signal on the SA, and robust fluorescence signal that remedied for the insufficient brightness of QDs was derived from Ru(bpy)₃²⁺. The characterization of SAQDsRu-labeled mAb (SAQDsRu-mAb) probe demonstrated strong luminescence, excellent stability and high affinity with ZEN (affinity constant was approximately 1.723 × 10⁹ M^-1), which can significantly improve the detection sensitivity. Impressively, a portable sensing system was developed by the integration of SAQDsRu-DICA with a smartphone-based readout. After optimization, this DICA indicated a limit of detection reaching down to 0.008 ng/mL (colorimetric mode) and 0.0058 ng/mL (fluorescent mode), which were much lower than that of conventional gold nanoparticles-based ICA (0.1029 ng/mL), possessing favorable specificity and repeatability (relative standard deviation (RSD) < 10%). Moreover, the feasibility of the immunoassay was further assessed by measuring ZEN in real samples with satisfactory recoveries, and the results are good consistent with liquid chromatography tandem mass spectrometry (LC-MS/MS).

An intermolecular hydrogen-bond-induced quench-type Ru(dcbpy)32+/TPA electrochemiluminescence system by nitrogen-doped carbon quantum dots

Here, we show that nitrogen-doped carbon quantum dots (NCQDs) strongly inhibits the anodic electrochemiluminescence (ECL) signal of a tris(4,4'-dicarboxylic acid-2,2'-bipyridyl) ruthenium(II) (Ru(dcbpy)₃²⁺)/tripropylamine (TPA) aqueous system. To determine the ECL-quenching mechanism, we used photoluminescence spectroscopy, UV-Visible absorption spectroscopy and dynamic simulation technology. Quenching of the ECL signal of Ru(dcbpy)₃²⁺/TPA by NCQDs was predominantly attributed to the interaction between Ru(dcbpy)₃²⁺ and NCQDs rather than that between TPA and NCQDs. Specifically, when Ru(dcbpy)₃²⁺ and NCQDs were in aqueous solution together, the carboxyl (-COOH) groups of Ru(dcbpy)₃²⁺ were in contact with oxygen- and nitrogen-containing groups on the surface of NCQDs and formed intermolecular hydrogen bonds. This process involved energy transfer from the excited-state Ru(dcbpy)₃²⁺ to the intermolecular hydrogen bonds, thus resulting in a decrease in the Ru(dcbpy)₃²⁺ ECL signal. On this basis, a quenching-type ECL sensor for the quantification of NCQDs was fabricated. The sensor had a wide linear range and an estimated detection limit of 0.0012 mg mL^-1, as well as excellent stability and selectivity. Satisfactory recoveries of 97.0-99.5% were obtained using the ECL sensor to quantify NCQDs in tap water. NCQDs could potentially be used as a quenching probe of Ru(dcbpy)₃²⁺ to construct various biosensors with widespread applications in the sensing field.

A label-free electrochemiluminescence immunosensor for carbohydrate antigen 153 based on polypyrrole-luminol-AuNPs nanocomposites with bi-catalysis

Polypyrrole-luminol-AuNPs nanocomposites were prepared and used to develop a sensitive label-free electrochemiluminescence (ECL) immunosensor for carbohydrate antigen 153 (CA153) detection. Firstly, polypyrrole (PPY) nanoparticles were synthesized by a chemical oxidation method using FeCl₃ as an oxidizing agent, then luminol and gold nanoparticles (AuNPs) were combined with PPY nanoparticles through electrostatic interaction to form PPY-luminol-AuNPs nanocomposites. The nanocomposites were characterized by transmission electron microscopy (TEM), UV-Vis absorption spectra, atomic emission spectrometry (AES), X-ray diffraction (XRD) and electrochemical impedance spectroscopy (EIS). Especially, iron element was also detected in the nanocomposites. The PPY-luminol-AuNPs nanocomposites showed excellent ECL activity due to the bi-catalysis of iron ion and gold nanoparticles on the ECL of luminol. Furthermore, the nanocomposites showed good film-forming property, and it can be fixed on electrode surface without the assistance of other film-forming materials. On this basis, an ECL immunosensor for CA153 was constructed by covalently immobilizing anti-CA153 on PPY-luminol-AuNPs modified indium-doped tin oxide (ITO) electrode. In the presence of CA153, a remarkable decrease in ECL signals was observed due to the formation of anti-CA153/CA153 complex. The immunosensor showed a good linear relationship in the concentration range of 0.001 to 700 U/mL for CA153, and the detection limit was 5.8 × 10^-4 U/mL (S/N = 3). Furthermore, the ECL immunosensor was applied to the determination of CA153 in practical human serum sample.

A simple and convenient electrochemiluminescence immunoassay by using gold nanoparticles as both label and co-reactant

A simple and convenient electrochemiluminescence immunoassay (ECLIA) has been developed by using gold nanoparticles (AuNPs) as both label and co-reactant. In this novel ECLIA, the detection antibodies labeled with AuNPs as co-reactant reacts directly with ruthenium complex to produce electrochemiluminescence (ECL), which avoids the weakness of luminophore as a label. The feasibility of the new method was investigated through the sandwich ECL immunosensor for the determination of human immunoglobulin (HIgG), and excitation of luminescence was respectively driven by linear sweep voltammetry and step potential. Under the optimal conditions, ECL intensity of the immunosensor increased with HIgG concentration in a wide range from 0.01 to 10.0 ng/mL and displayed linear response to logarithm of HIgG concentration. The results showed that the detection limit was 5 pg/mL, and the relative error was no more than 4.6% for the repeated measurements. The relative standard deviation was less than 2.9% for the determination of the standard sample, which can meet the requirement of ECLIA.

Ultrasensitive self-enhanced electrochemiluminescence sensor based on novel PAN@Ru@PEI@Nafion nanofiber mat

A novel self-enhanced electrochemiluminescence nanofiber mat was for the first time prepared by one-step electrospinning a mixture of polyacrylonitrile, Ru(bpy)₃²⁺, poly(ethylenimine) and Nafion.

Reduced graphene oxide-gold nanoparticles-catalase-based dual signal amplification strategy in a spatial-resolved ratiometric electrochemiluminescence immunoassay

A novel spatial-resolved electrochemiluminescent (ECL) ratiometry for cardiac troponin I (cTnI) analysis was developed using resonance energy transfer (RET) and a coreactant consumption strategy for signal amplification.

Highly Luminescent and Self-Enhanced Electrochemiluminescence of Tris(bipyridine) Ruthenium(II) Nanohybrid and Its Sensing Application for Label-Free Detection of MicroRNA

Inspired by the coreactive activity of carbon nanodots (CDs) and branched polyethylenimine (BPEI) toward electrochemiluminescence (ECL) of Ru(bpy)₃²⁺, a highly luminescent and self-enhanced ECL nanohybrid (Ru-BCDs) was synthesized through covalently linking BPEI-coated carbon dots (BCDs) with Tris (4,4'-dicarboxylic acid-2,2'-bipyridyl) ruthenium(II) dichloride (Ru(dcbpy)₃²⁺). The composition and morphological characterization demonstrated that the spherical Ru-BCDs particles with 12.1 ± 1.4 nm diameter were obtained. The enhanced ECL property of Ru-BCDs was proved to originate from the dual coreactive contribution of BPEI and CDs as coreactants as well as the intramolecular electron transfer process, which could shorten the electron transfer path and minimize energy loss. A carbon nitride nanosheet (CNN) was utilized to stabilize the Ru-BCDs-modified glassy carbon electrode, which greatly improved the stability of solid-state ECL. By utilizing the affinity discrepancy of the CNN to single-stranded and double-stranded nucleic acids, a label-free and signal-on ECL biosensor was constructed for the determination of microRNA-133a (miR-133a), a potential biomarker of acute myocardial infarction. The designed biosensor exhibited good performance of miR-133a detection with a detection limit of 60 fM and could be used for the detection of real human serum with satisfactory results. The self-enhanced ECL nanohybrid with distinguished ECL efficiency holds a promising prospect in biosensing and bioimaging applications.

A highly sensitive self-enhanced aptasensor based on a stable ultrathin 2D metal-organic layer with outstanding electrochemiluminescence property

3D bulk metal-organic frameworks (MOFs) have received growing interest in electrochemiluminescence (ECL) assays because they can provide a high specific surface for loading a large quantity of ECL luminophores, but the ECL efficiency of bulk MOFs is still low since some interior luminophores are difficult to be excited. Herein, an ultrathin 2D metal-organic layer (MOL) for grafting self-enhanced ruthenium complexes (Ru-l-Lys) was first synthesized to greatly increase the utilization ratio of luminophores. Compared with 3D bulk MOFs, ultrathin 2D MOL could provide more accessible postmodification sites for grafting the Ru-l-Lys complexes; the self-enhanced Ru-l-Lys complexes on MOL were easily excited by electrons due to the shortened ion/electron-transport distance and the removal of diffusion barriers. Furthermore, the electron transfer path between the Ru(ii) luminophore and coreactant (l-Lys) was shortened and the energy loss of the luminophores decreased, which significantly improved the ECL efficiency. As expected, our work manifested that the Zr-MOL's loading amount of Ru-l-Lys was about 1.23-fold higher than that of a 3D bulk Zr-MOF, and the ECL intensity and efficiency of Ru-l-Lys-Zr-MOL were around 93.45-fold and 1.64-fold higher than those of control Ru-l-Lys-Zr-MOF, respectively. Considering all of these merits, in this work, we utilized the prepared Ru-l-Lys-Zr-MOL as a highly efficient ECL indicator for the first time to fabricate a highly sensitive self-enhanced aptasensor for mucin 1 (MUC1) determination. The proposed aptasensor showed high sensitivity with a linear range from 1 fg mL^-1 to 100 pg mL^-1 with a detection limit of 0.72 fg mL^-1; it also exhibited excellent specificity and stability. It is noteworthy that this work not only provides a new strategy to design and synthesize high-performance ECL materials, but also opens a new way to develop ultrasensitive ECL sensors for bioanalysis.

Dual-signal-amplified electrochemiluminescence biosensor for microRNA detection by coupling cyclic enzyme with CdTe QDs aggregate as luminophor

In this work, a dual-signal-amplified electrochemiluminescence (ECL) biosensor was proposed for the first time to detect microRNAs (miRNAs) based on cyclic enzyme and seeded-watermelon-like mesoporous nanospheres (mSiO₂@CdTe@SiO₂, mSQS NSs). mSQS NSs were successfully fabricated by inlaying the CdTe quantum dots (QDs) into the mesoporous silica (mSiO₂) and future coating the surface with the silica layer. The obtained mSQS NSs contained tens of QDs and exhibited much stronger ECL signal than single QDs. The ECL biosensor achieved firstly signal amplification by using mSQS NSs to label the functional oligonucleotide probe (DNA-F) as enhanced ECL signal probes. Well-dispersed Fe₃O₄@Au nanoparticles were prepared as immobilization matrices to load hairpin-structured DNA probe (DNA-P). When the target miRNAs were present, hairpin DNA undertook conformation changes. Meanwhile, RNA/DNA duplexes was formed which cleaved by duplex-specific nuclease (DSN) to release miRNAs. Target miRNAs were cycled to hybridize with hairpin DNA, which achieved secondly signal amplification of the ECL biosensor. Thereafter, the complementarily parts between DNA-F and the rest DNA-P generated conjugates. The obtained conjugates would be collected on the surface of the electrode by effecting of magnet. Under the optimal conditions, the developed biosensor showed a wide linear range from 0.1 pM to 100 pM with a low detection limit of 33 fM (S/N = 3). The results of detection for the stability, specificity and reproducibility of ECL biosensor were outstanding. Simultaneously, the potential application of ECL biosensor was verified by using biosensor in serum sample.

A Novel Carbon Quantum Dots Signal Amplification Strategy Coupled with Sandwich Electrochemiluminescence Immunosensor for the Detection of CA15-3 in Human Serum

A sensitive sandwich electrochemiluminescence immunosensor was established by employing graphene oxide-PEI-carbon quantum dots (CQDs)-Au nanohybrid as probe to measure carbohydrate antigen 15-3 (CA15-3), a breast cancer biomarker. In this work, nanocomposites of Ag nanoparticles and polydopamine (AgNPs-PDA) were synthesized by redox reaction between dopamine and Ag⁺. The nanocomposite with high surface area can provide an efficient substrate for immobilizing initial antibody (Ab1). Carbon quantum dots (CQDs) are fixed on polyethylenimine-functionalized graphene oxide (PEI-GO) by amide bonds. Au nanoparticles are modified on CQDs-decorated PEI-GO substrates. The secondary antibody (Ab2) was immobilized by AuNPs/CQDs-PEI-GO composite. CQDs can be assembled onto the surface of an electrode by incorporation of CA15-3 with Ab1 and Ab2. Under the synergistic action of AgNPs, polydopamine, AuNPs, and PEI-GO, the ECL signal of CQDs is greatly amplified as an excellent conductive material to facilitate electron transfer rate and further increase electrochemical detection capability. Under optimal conditions, the fabricated immunosensor showed a linear concentration range from 0.005 to 500 U mL^-1, with a detection limit of 0.0017 U mL^-1 (signal-to-noise ratio of 3) for CA15-3. The designed ECL immunosensor displayed receivable accuracy, excellent stability, and high specificity. The results of the detection of human serum samples are satisfactory, revealing that the method offers a potential application for the clinical diagnosis of tumor markers.

A highly sensitive and reliable detection of CA15-3 in patient plasma with electrochemical biosensor labeled with magnetic beads

An early on-time detection of breast cancer can effectively affect the outcome of the treatment. Here, we developed an ultrasensitive, simple and reliable immunosensor to detect the lowest alteration of CA 15-3, the standard biomarker of breast cancer patients. The proposed immunosensor was achieved by modification of gold electrode by streptavidin to immobilize the biotinylated anti-CA 15-3 monoclonal antibody (mAb). Bovine serum albumin was used to prevent nonspecific binding. To improve the sensitivity of modified immunosensor, the sandwich signal enhancer consisting of streptavidin-coated magnetic beads conjugated with biotinylated horseradish peroxidase (HRP) and anti-CA 15-3 biotinylated mAb was applied. The electrochemical measurements were obtained in the presence of hydroquinone as a redox agent and H₂O₂ as the activating agent of HRP. Under optimized condition and using square wave voltammetry, the lower limit of quantification was obtained as 15 × 10^-6 U/mL and the linear CA 15-3 concentration range was 50-15 × 10^-6 U/mL. While showing significant stability, the immunosensor displayed an excellent sensitivity and specificity for the detection of CA 15-3 even in the human serum as compared to the enzyme-linked immunosorbent assay (ELISA) as a gold standard method. Based on our findings, the engineered immunosensor is proposed as a robust diagnostic tool for the clinical determination of CA 15-3 and other cancer biomarkers.

Antibody Biomimetic Material Made of Pyrrole for CA 15-3 and Its Application as Sensing Material in Ion-Selective Electrodes for Potentiometric Detection

This work reports a very simple approach for creating a synthetic antibody against any protein of interest and its application in potentiometric transduction. The selected protein was Breast Cancer Antigen (CA 15-3), which is implicated in breast cancer disease and used to follow-up breast cancer patients during treatment. The new material with antibody-like properties was obtained by molecular-imprinting technology, prepared by electropolymerizing pyrrol (Py, 5.0 × 10-3 mol/L) around Breast Cancer Antigen (CA 15-3) (100 U/mL) on a fluorine doped tin oxide (FTO) conductive glass support. Cyclic voltammetry was employed for this purpose. All solutions were prepared in 4-(2-Hydroxyethyl)-1-piperazineethanesulfonic acid (HEPES) buffer, of pH 6.5. The biomarker was removed from the imprinted sites by chemical action of ethanol. The biomimetic material was then included in poly vinyl chloride (PVC) plasticized membranes to act as potentiometric ionophore, having or not a lipophilic ionic additive added. The corresponding selective electrodes were evaluated by calibration curves (in buffer and in synthetic serum) and by selectivity testing. The best analytical performance was obtained by selective electrodes including the plastic antibody and no lipophilic additive. The average limits of detection were 1.07 U/mL of CA 15-3, with a linear response from 1.44 to 13.2 U/mL and a cationic slope of 44.5 mV/decade. Overall, the lipophilic additives yielded no advantage to the overall potentiometric performance. The application of the MIP-based electrodes to the analysis of spiked synthetic serum showed precise and accurate results.

Carboxylic group riched graphene oxide based disposable electrochemical immunosensor for cancer biomarker detection

In this work, we have developed for the first time a carboxylic group riched graphene oxide based disposable electrochemical immunosensor for cancer biomarker detection using methylene blue (MB). The developed immunosensor is highly sensitive for detection of biomarker Mucin1 (MUC1) in human serum samples. Development of this disposable electrochemical immunosensor was premeditated by applying specific monoclonal antibodies against MUC1. In this method, we explored highly conductive surface of carboxylic group (-COOH-) rich graphene oxide (GO) on screen-printed carbon electrodes (SPCE). This modified GO-COOH-SPCE was employed for the detection of MUC1 protein based on the reaction with methylene blue (MB) redox probe using differential pulse voltammetry (DPV) technique. Developed immunosensor exhibited good detection range for MUC1 with excellent linearity (0.1 U/mL- 2 U/mL), with a limit of detection of 0.04 U/mL. Upon potential application of developed biosensor, good recoveries were recorded in the range of 96-96.67% with % R.S.D 4.2. Analytical performance of the developed immunosensor assures the applicability in clinical diagnostic applications.