Construction of Au-IDE/CFP10-ESAT6 aptamer/DNA-AuNPs MSPQC for rapid detection of Mycobacterium tuberculosis

Development of SPQC sensor based on the specific recognition of TAL-effectors for locus-specific detection of 6-methyladenine in DNA

N6-methyladenosine (6mA) plays a pivotal role in diverse biological processes, including cancer, bacterial toxin secretion, and bacterial drug resistance. However, to date there has not been a selective, sensitive, and simple method for quantitative detection of 6mA at single base resolution. Herein, we present a series piezoelectric quartz crystal (SPQC) sensor based on the specific recognition of transcription-activator-like effectors (TALEs) for locus-specific detection of 6mA. Detection sensitivity is enhanced through the use of a hybridization chain reaction (HCR) in conjunction with silver staining. The limit of detection (LOD) of the sensor was 0.63 pM and can distinguish single base mismatches. We demonstrate the applicability of the sensor platform by quantitating 6mA DNA at a specific site in biological matrix. The SPQC sensor presented herein offers a promising platform for in-depth study of cancer, bacterial toxin secretion, and bacterial drug resistance.

An insight to the recent advancements in detection of Mycobacterium tuberculosis using biosensors: A systematic review

Since ancient times, Tuberculosis (TB) has been a severe invasive illness that has been prevalent for thousands of years and is also known as "consumption" or phthisis. TB is the most common chronic lung bacterial illness in the world, killing over 2 million people each year, caused by Mycobacterium tuberculosis (MTB). As per the reports of WHO, in spite of technology advancements, the average rate of decline in global TB infections from 2000-2018 was only 1.6% per year, and the worldwide reduction in TB deaths was only 11%. In addition, COVID-19 pandemic has reversed years of global progress in tackling TB with fewer diagnosed cases. The majority of undiagnosed patients of TB are found in low- and middle-income countries where the GeneXpert MTB/RIF assay and sputum smear microscopy have been approved by the WHO as reference procedures for quickly detecting TB. Biosensors, like other cutting-edge technologies, have piqued researchers' interest since they offer a quick and accurate way to identify MTB. Modern integrated technologies allow for the rapid, low-cost, and highly precise detection of analytes in extremely little amounts of sample by biosensors. Here in this review, we outlined the severity of tuberculosis (TB) and the most recent developments in the biosensors sector, as well as their various kinds and benefits for TB detection. The review also emphasizes how widespread TB is and how it needs accurate diagnosis and effective treatment.

An insight into biosensing platforms used for the diagnosis of various lung diseases: A review

Many of the infectious diseases are ubiquitous in nature and pose a threat to global and public health. The original cause for such type of serious maladies can be summarized as the scarcity of appropriate analysis and treatment methods. Pulmonary diseases are considered one of the life-threatening lung diseases that affect millions of people globally. It consists of several types, namely, asthma, lung cancer, tuberculosis, chronic obstructive pulmonary disease, and several respiratory-related infections. This is due to the limited access to well-equipped healthcare facilities for early disease diagnosis. This needs the availability of processes and technologies that can help to stop this harmful disease-diagnosing practice. Various approaches for diagnosing various lung diseases have been developed over time, namely, autopsy, chest X-rays, low-dose CT scans, and so forth. The need of the hour is to develop a rapid, simple, portable, and low-cost method for the diagnosis of pulmonary diseases. So nowadays, biosensors have been becoming one of the highest priority research areas as a potentially useful tool for the early diagnosis and detection of many pulmonary lung diseases. In this review article, various types of biosensors and their applications in the diagnosis of lung-related disorders are expansively explained.

The construction of CRISPR/Cas9-mediated FRET 16S rDNA sensor for detection of Mycobacterium tuberculosis

The simple and efficient detection of nucleic acids is important in the diagnosis of tuberculosis (TB) caused by Mycobacterium tuberculosis (M. tuberculosis). However, base mismatch will lead to false positive and false negative nucleic acid test, which seriously interferes with the accuracy of the final results. Herein, we demonstrated a CRISPR/Cas-9-mediated fluorescent strategy utilizing fluorescence resonance energy transfer (FRET) for the detection of bacteria. High-variable region of M. tuberculosis 16S rDNA fragment was used as the target, and CRISPR/Cas9 was used as the recognition element. The binding of the P1 probe of upconversion nanoparticles (UCNPs) @SiO₂-P1 and the P2 probe of Fe₃O₄@Au-P2 caused the fluorescence quenching of UCNPs. In the presence of the target, the P2 probe hybridized with the target to form double-stranded DNA (dsDNA), which was recognized and cleaved by CRISPR/Cas9, resulting in the breaking of the P1-P2 duplex linkage. UCNPs moved away from Fe₃O₄@Au under a magnetic field, and the fluorescence signal was restored; bacteria were detected under the excitation of a 980 nm laser source. Using the CRISPR/Cas-9-mediated system, the sensor could distinguish single-base mismatches in 10 bases from the protospacer adjacent motif (PAM) region. The limit of detection (LOD) was 20 CFU mL^-1 and the detection time was 2 h. It developed a new way of accurate nucleic acid detection for disease diagnosis.

Current progress of functional nanobiosensors for potential tuberculosis diagnosis: The novel way for TB control?

Tuberculosis (TB), induced by the foxy Mycobacterium tuberculosis (Mtb), is still one of the top killers worldwide among infectious diseases. Although several antibiotics have been developed to significantly relieve the tuberculosis epidemics worldwide, there are still several important scientific challenges for tuberculosis. As one of the most critical issues for tuberculosis control, the accurate and timely diagnosis of tuberculosis is critical for the following therapy of tuberculosis and thus responsible for the effective control of drug-resistant tuberculosis. Current tuberculosis diagnostic methods in clinic are still facing the difficulties that they can't provide the rapid diagnostic results with high sensitivity and accuracy, which therefore requires the development of more effective novel diagnostic strategies. In recent decades, nanomaterials have been proved to show promising potentials for novel nanobiosensor construction based on their outstanding physical, chemical and biological properties. Taking these promising advantages, nanomaterial-based biosensors show the potential to allow the rapid, sensitive and accurate tuberculosis diagnosis. Here, aiming to increase the development of more effective tuberculosis diagnostic strategy, we summarized the current progress of nanobiosensors for potential tuberculosis diagnosis application. We discussed the different kind diagnostic targets for tuberculosis diagnosis based on nanobiosensors, ranging from the detection of bacterial components from M. tuberculosis, such as DNA and proteins, to the host immunological responses, such as specific cytokine production, and to the direct whole cell detection of M. tuberculosis. We believe that this review would enhance our understandings of nanobiosensors for potential tuberculosis diagnosis, and further promote the future research on nanobiosensor-based tuberculosis diagnosis to benefit the more effective control of tuberculosis epidemic.

Biosensors for the detection of Mycobacterium tuberculosis: a comprehensive overview

Tuberculosis (TB) infection is one of the leading causes of death in the world. According to WHO reports 2019, the average rate of decrease in global TB incidences was only 1.6% per year from 2000 to 2018, besides that the global decline in TB deaths was just 11%. Therefore, the dire need for early detection of the pathogen for the successful diagnosis of TB seems justified. Mycobacterium tuberculosis secretory proteins have gained more attention as TB biomarkers, for the early diagnosis and treatment of TB. Here in this review, we elaborate on the recent advancements made in the field of piezoelectric, magnetic, optical, and electrochemical biosensors, in addition to listing their merits and setbacks. Additionally, this review also discusses the construction of biosensors through modern integrated technologies, such as combinations of analytical chemistry, molecular biology, and nanotechnology. Integrated technologies enhance the detection for perceiving highly selective, specific, and sensitive signals to detect M. tuberculosis. Furthermore, this review highlights the recent challenges and scope of improvement in numerous biosensors developed for rapid, specific, selective, and sensitive detection of tuberculosis to reduce the TB burden and successful treatment.

Mycobacterium tuberculosis piezoelectric sensor based on AuNPs-mediated enzyme assisted signal amplification

Rapid diagnosis of tuberculosis disease (TB) still remained a pressing need for TB control efforts all over the world. However, the existing detection approaches cannot satisfy demand of rapid detection of clinical Mycobacterium tuberculosis (M. tuberculosis) because of the long detection time and high cost. Herein, we proposed a new M. tuberculosis piezoelectric sensor based on AuNPs-mediated enzyme assisted signal amplification. A hairpin-shaped DNA duplex with a protrusion of the 3' end was designed. In the presence of specific 16 S rDNA fragment of M. tuberculosis, the hairpin probe was opened, which triggered the selective cleavage of hairpin probe by Exonuclease III (Exo III), resulting in the release of uncut DNA probe and target DNA. The released target DNA hybridized with another hairpin-shaped DNA duplex, and a new digestion cycle was started, thus generating large amounts of uncut DNA probes. The uncut DNA was pulled to the electrode surface by the hybridization with capture probe modified on the electrode. Subsequently detection probe labeled AuNPs was hybridized with uncut DNA and entered between the two electrodes. The AuNPs linked to hybridized detection probe were grown in the HAuCl₄ and Nicotinamide adenine dinucleotide (NADH) solution and offered the conductive connection between the gaps of electrode. The changes were monitored by the piezoelectric sensor. The piezoelectric biosensor could achieve a detection of M. tuberculosis (10²-10⁸ CFU mL^-1) within 3 h, the detection limit (LOD) was 30 CFU mL^-1. The methodology could be transformed into different microbial targets, which is suitable for further development of small portable equipment and multifunctional detection.

Aptasensor for the Detection of Mycobacterium tuberculosis in Sputum Utilising CFP10-ESAT6 Protein as a Selective Biomarker

A portable electrochemical aptamer-antibody based sandwich biosensor has been designed and successfully developed using an aptamer bioreceptor immobilized onto a screen-printed electrode surface for Mycobacterium tuberculosis (M. tuberculosis) detection in clinical sputum samples. In the sensing strategy, a CFP10-ESAT6 binding aptamer was immobilized onto a graphene/polyaniline (GP/PANI)-modified gold working electrode by covalent binding via glutaraldehyde linkage. Upon interaction with the CFP10-ESAT6 antigen target, the aptamer will capture the target where the nano-labelled Fe3O4/Au MNPs conjugated antibody is used to complete the sandwich format and enhance the signal produced from the aptamer-antigen interaction. Using this strategy, the detection of CFP10-ESAT6 antigen was conducted in the concentration range of 5 to 500 ng/mL. From the analysis, the detection limit was found to be 1.5 ng/mL, thereby demonstrating the efficiency of the aptamer as a bioreceptor. The specificity study was carried out using bovine serum albumin (BSA), MPT64, and human serum, and the result demonstrated good specificity that is 7% higher than the antibody-antigen interaction reported in a previous study. The fabricated aptasensor for M. tuberculosis analysis shows good reproducibility with an relative standard deviation (RSD) of 2.5%. Further analysis of M. tuberculosis in sputum samples have shown good correlation with the culture method with 100% specificity and sensitivity, thus making the aptasensor a promising candidate for M. tuberculosis detection considering its high specificity and sensitivity with clinical samples.

Aptamers: An Emerging Tool for Diagnosis and Therapeutics in Tuberculosis

Tuberculosis (TB) has been plaguing human civilization for centuries, and currently around one-third of the global population is affected with TB. Development of novel intervention tools for early diagnosis and therapeutics against Mycobacterium tuberculosis (M.tb) is the main thrust area in today's scenario. In this direction global efforts were made to use aptamers, the chemical antibodies as tool for TB diagnostics and therapeutics. This review describes the various aptamers introduced for targeting M.tb and highlights the need for development of novel aptamers to selectively target virulent proteins of M.tb for vaccine and anti-TB drugs. The objective of this review is to highlight the diagnostic and therapeutic application of aptamers used for tuberculosis. The discovery of aptamers, SELEX technology, different types of SELEX development processes, DNA and RNA aptamers reported for diseases and pathogenic agents as well have also been described in detail. But the emphasis of this review is on the development of aptamers which can block the function of virulent mycobacterial components for developing newer TB vaccine candidates and/or drug targets. Aptamers designed to target M.tb cell wall proteins, virulent factors, secretory proteins, or combination could orchestrate advanced diagnosis and therapeutic measures for tuberculosis.

Portable electrochemical immunosensor for detection of Mycobacterium tuberculosis secreted protein CFP10-ESAT6 in clinical sputum samples

An early detection of Mycobacterium tuberculosis is very important to reduce the number of fatal cases and allow for fast recovery. However, the interpretation of the result from smear microscopy requires skilled personnel due to the propensity of the method to produce false-negative results. In this work, a portable, rapid, and simple sandwich-type immunosensor reader has been developed that is able to detect the presence of M. tuberculosis in sputum samples. By using sandwich-type immunosensor, an anti-CFP10-ESAT6 antibody was immobilized onto the graphene/polyaniline (GP/PANI)-modified gold screen-printed electrode. After incubation with the target CFP10-ESAT6 antigen, the iron/gold magnetic nanoparticles (Fe₃O₄/Au MNPs) conjugated with anti-CFP10-ESAT6 antibody were used to complete the sandwich format. Differential pulse voltammetry (DPV) technique was used to detect the CFP10-ESAT6 antigen at the potential range of 0.0-1.0 V. The detection time is less than 2 h. Under optimal condition, CFP10-ESAT6 antigen was detected in a linear range from 10 to 500 ng mL^-1 with a limit of detection at 1.5 ng mL^-1. The method developed from this process was then integrated into a portable reader. The performance of the sensor was investigated and compared with the standard methods (culture and smear microscopy). It provides a good correlation (100% sensitivity and 91.7% specificity) with both methods of detection for M. tuberculosis in sputum samples henceforth, demonstrating the potential of the device as a more practical screening tool.Graphical abstract.

Mycobacteriophage SWU1-Functionalized magnetic particles for facile bioluminescent detection of Mycobacterium smegmatis

Mycobacterium tuberculosis (M. tuberculosis), the causative agent of tuberculosis, ranks one of the most dangerous pathogens for its large deaths toll. Due to its characteristic extremely slow growth, the conventional culture-based protocol cannot meet the requirement for the efficient diagnosis of M. tuberculosis-induced tuberculosis. With our previously isolated mycobacteriophage SWU1, we tried to develop a mycobacteriophage-based protocol for detecting Mycobacterium genus. In this work, Mycobacterium smegmatis (M. smegmatis) was used as a model due to its similar physiological features as pathogenic M. tuberculosis, much faster growth and nonpathogenic property. Mycobacteriophage SWU1-functionalized magnetic particles (SWU1-MPs) were used as highly efficient separation carriers for the viable host M. smegmatis. After a replication cycle of approximate 60 min, the cells of M. smegmatis were disrupted by the progeny mycobacteriophages to release intracellular adenosine triphosphate (ATP). The bioluminescent (BL) signal of released ATP was collected to quantitate the amount of M. smegmatis. For the developed protocol, the detection range is 5.0 × 10² to 5.0 × 10⁵ CFU mL^-1, and the detection limit is 3.8 × 10² CFU mL^-1 (S/N = 3). Furthermore, the protocol can exclude the potential interference of 3 non-pathogenic mycobacteria and 6 other bacterial species. It has been successfully applied to quantitate M. smegmatis in human urine, human saliva, and human serum. The results demonstrate its application potential for a simple, fast, and specific diagnosis of M. tuberculosis infection.

Rapid and sensitive detection of Mycobacterium tuberculosis based on strand displacement amplification and magnetic beads

Tuberculosis is one of the main infectious diseases threatening public health, and the development of simple, rapid, and cost-saving methods for tuberculosis diagnosis is of profound importance for tuberculosis prevention and treatment. The bacterium Mycobacterium tuberculosis (MTB) is the pathogen that causes tuberculosis, and assaying for MTB is the only criterion for tuberculosis diagnosis. A new enzyme-free method based on strand displacement amplification and magnetic beads was developed for simple, rapid, and cost-saving MTB detection. Under optimum conditions, a good linear relationship could be observed between fluorescence and MTB specific DNA concentration ranging from 0.05 to 150 nM with a correlation coefficient of 0.993 (n = 8) and a detection limit of 47 pM (3σ/K). The present method also distinguished a one base mismatch from MTB specific DNA, showing great promise for MTB genome single base polymorphism analysis. MTB specific DNA content in polymerase chain reaction samples was successfully detected using the new method, and recoveries were 97.8-100.8%, indicating that the present method had high accuracy and shows good potential for the early diagnosis of tuberculosis.

Application of Biosensors for Detection of Pathogenic Food Bacteria: A Review

The use of biosensors is considered a novel approach for the rapid detection of foodborne pathogens in food products. Biosensors, which can convert biological, chemical, or biochemical signals into measurable electrical signals, are systems containing a biological detection material combined with a chemical or physical transducer. The objective of this review was to present the effectiveness of various forms of sensing technologies for the detection of foodborne pathogens in food products, as well as the criteria for industrial use of this technology. In this article, the principle components and requirements for an ideal biosensor, types, and their applications in the food industry are summarized. This review also focuses in detail on the application of the most widely used biosensor types in food safety.

Non-Invasive Delivery of Therapeutics into the Brain: The Potential of Aptamers for Targeted Delivery

The blood-brain barrier (BBB) is a highly specialised network of blood vessels that effectively separates the brain environment from the circulatory system. While there are benefits, in terms of keeping pathogens from entering the brain, the BBB also complicates treatments of brain pathologies by preventing efficient delivery of macromolecular drugs to diseased brain tissue. Although current non-invasive strategies of therapeutics delivery into the brain, such as focused ultrasound and nanoparticle-mediated delivery have shown various levels of successes, they still come with risks and limitations. This review discusses the current approaches of therapeutic delivery into the brain, with a specific focus on non-invasive methods. It also discusses the potential for aptamers as alternative delivery systems and several reported aptamers with promising preliminary results.

Highly electrically conductive two-dimensional Ti3C2 Mxenes-based 16S rDNA electrochemical sensor for detecting Mycobacterium tuberculosis

Tuberculosis is one of the life-threatening infectious diseases caused by the obligate pathogenic bacterium Mycobacterium tuberculosis (M. tuberculosis). The current M. tuberculosis detection approaches cannot satisfy the requirement for early clinical diagnosis because of long detection time as well as low specificity. In our study, an electrochemical M. tuberculosis sensor was constructed by using specific fragment of 16S rDNA of M. tuberculosis H37Ra as target biomarker, peptide nucleic acid (PNA) as capture probe and highly conductive two-dimensional Ti₃C₂ MXenes as the signal amplified transduction material. After the hybridization between PNA and the specific fragment of 16S rDNA on the substrate of PNA-AuNPs nanogap network electrode, the target fragments were directly linked with conductive Ti₃C₂ MXenes by strong interactions between zirconium-cross-linked Ti₃C₂ MXenes and phosphate groups of the target fragments. The linking of Ti₃C₂ MXenes to the hybridized target fragments would bridge the gaps of the interrupted AuNPs in the nanogap network electrode and forming the conductive connection to cause the change in conductance between the electrodes. This conductance change could be used for M. tuberculosis detection. The limit of detection (LOD) of proposed method was 20 CFU mL^-1, and detection time was 2 h. Proposed method would find potential application in rapid detection of M. tuberculosis.

DNA-Programmed Chemical Synthesis of Polymers and Inorganic Nanomaterials

DNA nanotechnology, based on sequence-specific DNA recognition, could allow programmed self-assembly of sophisticated nanostructures with molecular precision. Extension of this technique to the preparation of broader types of nanomaterials would significantly improve nanofabrication technique to lower nanometer scale and even achieve single molecule operation. Using such exquisite DNA nanostructures as templates, chemical synthesis of polymer and inorganic nanomaterials could also be programmed with unprecedented accuracy and flexibility. This review summarizes recent advances in the synthesis and assembly of polymer and inorganic nanomaterials using DNA nanostructures as templates, and discusses the current challenges and future outlook of DNA templated nanotechnology.

Click DNA cycling in combination with gold nanoparticles loaded with quadruplex DNA motifs enable sensitive electrochemical quantitation of the tuberculosis-associated biomarker CFP-10 in sputum

An electrochemical aptamer-based assay is described for the determination of CFP-10 which is an early secretary biomarker of Mycobacterium tuberculosis. CFP-10 is specifically captured by its aptamer and then induces a DNA cross-linking click reaction, the release of CFP-10, and an amplification cycle of repeated CFP-10 release. This mechanism (with dual amplification via DNA click and target release cycle) causes more and more CFP-10 Apt strands on the electrode surface to expose their 5' overhang and to hybridize with the DNA complexes linked to the gold nanoparticles (AuNPs). Consequently, large amounts of AuNPs, each loaded with a number of quadruplex DNA motifs, can be bound on the electrode surface and remarkably enhance the signal. Under optimal conditions, the method has a detection limit as low as 10 pg.mL^-1 of CFP-10. The method was successfully applied to the diagnosis of M. tuberculosis in sputum. Graphical abstract Schematic representation of an electrochemical CFP-10 (10-kDa culture filtrate protein) assay using click DNA cycling in combination with gold nanoparticles loaded with quadruplex DNA motifs. Click chemistry reaction between Dibenzocyclooctyne (DBCO)-DNA and azido-DNA can liberate the CFP-10 antigen for the next cycle, which can be viewed as the first amplification step. G-quadruplex-based DNAzyme is formed due to the guanine-rich sequences of DNA S1, which can be viewed as the second amplification step.

The construction of Mycobacterium tuberculosis 16S rDNA MSPQC sensor based on Exonuclease III-assisted cyclic signal amplification

Tuberculosis caused by Mycobacterium tuberculosis (M. tuberculosis) remains one of the most serious infectious diseases all over the world. The key to reduce the spread and mortality rate of tuberculosis is to develop faster and more sensitive approaches for detection of M. tuberculosis. However, current detection methods can not meet the requirements of rapid clinical M. tuberculosis detection in terms of detection time. Herein, a new 16S rDNA multichannel series piezoelectric quartz crystal (MSPQC) sensor based on Exonuclease III (Exo III)-aided target recycling has been developed for rapid detection of M. tuberculosis. The specific 16S rDNA fragment of M. tuberculosis was used as biomarker, DNA capture probes complementary to the biomarker were designed and modified on the surface of AuNPs. The Exo III which could recognise hybrid duplexes and selectively digest DNA capture probe was used to assist digestion cycle by digesting DNA capture probe and releasing the intact target fragment. After all DNA probes loading on the surface of AuNPs were removed, the surface of AuNPs was exposed and conductive connection was formed between the nanogap network electrode by self-catalytic growth of exposed AuNPs in the glucose and HAuCl₄ solution. This resulted in sensitive response of M. tuberculosis sensor and M. tuberculosis was detected by recording this response. The limit of detection (LOD) of the method was 20 CFU/mL and the detection time was less than 3 h. It was expected to be widely used in detection methods of M. tuberculosis.

Mycobacterium tuberculosis strain H37Rv Electrochemical Sensor Mediated by Aptamer and AuNPs-DNA

The accurate and rapid detection of Mycobacterium tuberculosis ( M. tuberculosis) is essential for the effective treatment of tuberculosis. In this article, we propose an electrochemical sensor to detect M. tuberculosis reference strain H37Rv. The sensor contains an H37Rv aptamer and oligonucleotides modified with gold nanoparticles (AuNPs-DNA). An H37Rv aptamer screened by our laboratory was used as the recognition probe. The change in frequency shift mediated by AuNPs-DNA in the presence of H37Rv was detected using a multichannel series piezoelectric quartz crystal (MSPQC) system. Three oligonucleotides modified with gold nanoparticles were designed. These oligonucleotides contained 12, 12, and 13 bases that hybridized with the 37-nt H37Rv aptamer. H37Rv aptamer was immobilized on the gold electrode surface by Au-S bonds. A conductive-layer was then formed by sequential hybridization of the aptamer with the three designed AuNPs-DNAs. When H37Rv was present, it specifically bound to the aptamer, resulting in the detachment of AuNPs-DNA from the electrode. The conductive layer was thereby replaced by a nonconductive complex of aptamer and bacteria. These changes were monitored by the MSPQC system. The proposed sensor is rapid, specific and sensitive, the detection time was 2 h. The detection limit was 100 cfu/mL. This sensor would be of great benefit for the early clinical diagnosis of tuberculosis.

A new aptamer/polyadenylated DNA interdigitated gold electrode piezoelectric sensor for rapid detection of Pseudomonas aeruginosa

Rapid detection of Pseudomonas aeruginosa (P. aeruginosa) is of great importance for accurate diagnosis and treatment of infected patients. In this study, a novel method was developed for the selective detection of P. aeruginosa by combing the sandwich type complex of magnetic bead/aptamer/polyadenylated-DNA with the sensitive detection platform of gold (Au) interdigital electrode connected to a multichannel series piezoelectric quartz crystal (Au IDE-MSPQC) system. Here, the magnetic bead (MB) was used as carrier for immobilization of the aptamer of P. aeruginosa. Polyadenylated DNA was bound to the aptamer through complementary strand pairing. When the P. aeruginosa was present in the sample solution, the polyadenylated DNA was replaced by the P. aeruginosa because of the specific interaction between P. aeruginosa and its aptamer. The released polyadenylated DNA strand in the detected solution could adsorb onto the surface of Au IDE by virtue of the strong interaction between adenine (A) and Au IDE, and result in sensitive frequency shift response of the MSPQC sensor. The limits of detection (LOD) of the method were as low as 9 CFU/mL in buffer and 52 CFU/mL in simulated blood sample. The proposed method was successfully applied to the selective detection of P. aeruginosa in blood samples. The constructed sensor is expected to find application for the rapid detection of P. aeruginosa in environment, food and clinical diagnosis.

Magnetic Nanoparticle-Based Biosensing Assay Quantitatively Enhances Acid-Fast Bacilli Count in Paucibacillary Pulmonary Tuberculosis

A new method using a magnetic nanoparticle-based colorimetric biosensing assay (NCBA) was compared with sputum smear microscopy (SSM) for the detection of pulmonary tuberculosis (PTB) in sputum samples. Studies were made to compare the NCBA against SSM using sputum samples collected from PTB patients prior to receiving treatment. Experiments were also conducted to determine the appropriate concentration of glycan-functionalized magnetic nanoparticles (GMNP) used in the NCBA and to evaluate the optimal digestion/decontamination solution to increase the extraction, concentration and detection of acid-fast bacilli (AFB). The optimized NCBA consisted of a 1:1 mixture of 0.4% NaOH and 4% N-acetyl-L-cysteine (NALC) to homogenize the sputum sample. Additionally, 10 mg/mL of GMNP was added to isolate and concentrate the AFB. All TB positive sputum samples were identified with an increased AFB count of 47% compared to SSM, demonstrating GMNP's ability to extract and concentrate AFB. Results showed that NCBA increased AFB count compared to SSM, improving the grade from "1+" (in SSM) to "2+". Extending the finding to paucibacillary cases, there is the likelihood of a "scant" grade to become "1+". The assay uses a simple magnet and only costs $0.10/test. NCBA has great potential application in TB control programs.

Nano-biosensing approaches on tuberculosis: Defy of aptamers

Tuberculosis is a major global health problem caused by the bacterium Mycobacterium tuberculosis (Mtb) complex. According to WHO reports, 53 million TB patients died from 2000 to 2016. Therefore, early diagnosis of the disease is of great importance for global health care programs. The restrictions of traditional methods have encouraged the development of innovative methods for rapid, reliable, and cost-effective diagnosis of tuberculosis. In recent years, aptamer-based biosensors or aptasensors have drawn great attention to sensitive and accessible detection of tuberculosis. Aptamers are small short single-stranded molecules of DNA or RNA that fold to a unique form and bind to targets. Once combined with nanomaterials, nano-scale aptasensors provide powerful analytical platforms for diagnosing of tuberculosis. Various groups designed and studied aptamers specific for the whole cells of M. tuberculosis, mycobacterial proteins and IFN-γ for early diagnosis of TB. Advantages such as high specificity and strong affinity, potential for binding to a larger variety of targets, increased stability, lower costs of synthesis and storage requirements, and lower probability of contamination make aptasensors pivotal alternatives for future TB diagnostics. In recent years, the concept of SOMAmer has opened new horizons in high precision detection of tuberculosis biomarkers. This review article provides a description of the research progresses of aptamer-based and SOMAmer-based biosensors and nanobiosensors for the detection of tuberculosis.

Selection of DNA aptamers against Mycobacterium tuberculosis Ag85A, and its application in a graphene oxide-based fluorometric assay

The Mycobacterium Ag85 complex is the major secretory protein of M. tuberculosis. It is a potential marker for early diagnosis of tuberculosis (TB). The authors have identified specific aptamers for Ag85A (FbpA) via protein SELEX using magnetic beads. After twelve rounds of selection, two aptamers (Apt8 and Apt22) were chosen from different groups, and their binding constants were determined by flow cytometry. Apt22 (labeled with Atto 647N) binds to FbpA with high affinity (K_d = 63 nM) and specificity. A rapid, sensitive, and low-cost fluorescent assay was designed based on the use of Apt22 and graphene oxide, with a limit of detection of 1.5 nM and an analytical range from 5 to 200 nM of FbpA. Graphical abstract Schematic illustration of graphene oxide-based aptasensor for fluorometric determination of FbpA.

Bioelectrochemical Detection of Mycobacterium tuberculosis ESAT-6 in an Antibody-Based Biomicrosystem

Bioelectrochemical sensing of Mycobacterium tuberculosis through electro-immunosensors is a promising technique to detect relevant analytes. In general, immunosensors require the formation of organic assemblies by the adsorption of molecular constituents. Moreover, they depend on the correct immobilization of the bio-recognition element in the biosensor. These procedures cannot be easily monitored without the use of invasive methods. In this work, an impedance analysis technique was used, as a non-invasive method, to measure and differentiate the manufacturing stages of the sensors. Biomicrosystems were fabricated through physical vapor deposition (PVD) of 80 nm Au nanolayers on 35 µm copper surfaces. Later, the surface was modified through thiolation methods generating a self-assembled-monolayer (SAM) with 20 mM 4-aminothiophenol (4-ATP) on which a polyclonal antibody (pAb) was covalently attached. Using impedance analysis, every step of the electro-immunosensor fabrication protocol was characterized using 40 independent replicas. Results showed that, compared to the negative controls, distilled water, and 0.5 µg/mL HSA, a maximum variation of 171% between each replica was achieved when compared to samples containing 0.5 µg/mL of ESAT-6 M. tuberculosis immunodominant protein. Therefore, this development validates a non-invasive method to electrically monitor the assembly process of electro-immunosensors and a tool for its further measure for detection of relevant antigens.

Aptamer-assisted novel technologies for detecting bacterial pathogens

Nowadays, all people are at risk of infectious diseases that are mainly caused by bacteria causing infection. There is a permanent demand for an appropriate detection method that is affordable, practical, careful, rapid, sensitive, efficient and economical. Aptamers are single stranded DNA or RNA oligonucleotides, which can be recognized specifically and bind to their target molecules and also, be exploited in diagnostic applications. Recently, aptamer-based systems have offered great potentials in applications for the recognition of several important bacterial pathogens from clinical and food specimens. There are several reports appraising the diagnostic applicability of aptamer-based systems for the detection of pathogens. As for its excellent sensitivity, as well as its rapid and efficient detectability, this technique may be practical to indicate bacterial targets with less sample size and may consume less time than traditional methods These systems offer a promising approach for the sensitive and quick detection of food-borne and clinical agents. This review provides an overview of aptamer-based methods as a novel approach for detecting bacterial pathogens.

Selection of a new Mycobacterium tuberculosis H37Rv aptamer and its application in the construction of a SWCNT/aptamer/Au-IDE MSPQC H37Rv sensor

A rapid and accurate detection method for Mycobacterium tuberculosis (M. tuberculosis) is essential for effectively treating tuberculosis. However, current detection methods cannot meet these clinical requirements because the methods are slow or of low specificity. Consequently, a new highly specific ssDNA aptamer against M. tuberculosis reference strain H37Rv was selected by using the whole-cell systematic evolution of ligands by exponential enrichment technique. The selected aptamer was used to construct a fast and highly specific H37Rv sensor. The probe was produced by immobilizing thiol-modified aptamer on an Au interdigital electrode (Au-IDE) of a multichannel series piezoelectric quartz crystal (MSPQC) through Au-S bonding, and then single-walled carbon nanotubes (SWCNTs) were bonded on the aptamer by π-π stacking. SWCNTs were used as a signal indicator because of their considerable difference in conductivity compared with H37Rv. When H37Rv is present, it replaces the SWCNTs because it binds to the aptamer much more strongly than SWCNTs do. The replacement of SWCNTs by H37Rv resulted in a large change in the electrical properties, and this change was detected by the MSPQC. The proposed sensor is highly selective and can distinguish H37Rv from Mycobacterium smegmatis (M. smegmatis) and Bacillus Calmette-Guerin vaccine (BCG). The detection time was 70min and the detection limit was 100cfu/mL. Compared with conventional methods, this new SWCNT/aptamer/Au-IDE MSPQC H37Rv sensor was specific, rapid, and sensitive, and it holds great potential for the early detection of H37Rv in clinical diagnosis.

Nanodiagnostics for tuberculosis detection

INTRODUCTION

Tuberculosis (TB) is a leading killer worldwide. End TB strategy aims at ending the TB epidemic by 2030. Early, accurate, and affordable diagnosis represents a cornerstone to achieve this goal. Innovative strategies for TB diagnostics have been introduced. However, the ideal assay is yet unavailable and conventional methods remain necessary for diagnosis. Unique properties of nanoparticles (NPs) have allowed their utilization in TB detection via targeting disease biomarkers. Area covered: Until now, around thirty-five TB NP-based assays have been partially or fully characterized. Accuracy, low-cost, and short time-to-result represent the common properties of proposed platforms. TB nanodiagnostics now encompass almost all clinical aspects of the disease including active TB, non-tuberculous mycobacteria, rifampicin resistant TB, TB/HIV co-infection, latent TB, and extra-pulmonary TB. This review summarizes state-of-the-art knowledge of TB nanodiagnostics for the last 10 years. Special consideration is given for fabrication concepts, detection strategies, and clinical performance using various clinical specimens. The potential of TB nanodiagnostics to fulfill the need for ideal MTB testing is assessed. Expert commentary: TB nanodiagnostics show promise to be ideal detection tools that can meet the rigorous demands to end the TB epidemic by 2030.

A novel method for the rapid detection of microbes in blood using pleurocidin antimicrobial peptide functionalized piezoelectric sensor

The rapid detection of microbes is critical in clinical diagnosis and food safety. Culture-dependent assays are the most widely used microbial detection methods, but these assays are time-consuming. In this study, a rapid microbial detection method was proposed using a pleurocidin/single-walled carbon nanotubes/interdigital electrode-multichannel series piezoelectric quartz crystal (pleurocidin/SWCNT/IDE-MSPQC) sensor. The selected pleurocidin antimicrobial peptide served as a recognition probe that exhibits broad-spectrum antimicrobial activity and the SWCNT acted as the electronic transducer and cross-linker for the immobilization of pleurocidin on the IDE. The response mechanism of the sensor was based on the specific interaction between pleurocidin and the microbe causing pleurocidin to detach from the SWCNT modified IDE, resulting in a sensitive frequency shift response of the MSPQC. Microbes that may be clinically present in the bloodstream during an infection were successfully detected by the proposed method within 15min. The developed strategy provides a new universal platform for the rapid detection of microbes.

Integrated microfluidic device using a single universal aptamer to detect multiple types of influenza viruses

DNA aptamers that can bind specific molecular targets have great potential as probes for microbial diagnostic applications. However, aptamers may change their conformation under different operating conditions, thus affecting their affinity and specificity towards the target molecules. In this study, a new integrated microfluidic system was developed that exploited the predictable change in conformation of a single universal influenza aptamer exposed to differing ion concentrations in order to detect multiple types of the influenza virus. Furthermore, the fluorescent-labeled universal aptamer used in this system could distinguish and detect three different influenza viruses (influenza A H1N1, H3N2, and influenza B) at the same time in 20min and therefore has great potential for point-of-care applications requiring rapid diagnosis of influenza viruses.