Cubic Cu2O nanoframes with a unique edge-truncated structure and a good electrocatalytic activity for immunosensor application

Self-Assembled Perylene Diimide (PDI) Nanowire Sensitized In2O3@MgIn2S4 S-Scheme Heterojunction as Photoelectrochemical Biosensing Platform for the Detection of CA15-3

Inorganic/organic heterojunctions show promising applications as high-performance sensing platforms for photoelectrochemical (PEC) immunosensors. This work reports constructing a PEC biosensor for CA15-3 based on a self-assembled perylene diimide (PDI) nanowire sensitized In2O3@MgIn2S4 S-scheme heterojunction platform. P-type semiconductor Cu2O nanoparticles were designed as a signal burst source and were used as immunoassay labels. The carboxyl group on self-assembled PDI nanowires eliminates the step of additional surface functionalization for covalent immobilization of the capture elements. The π-π stacking of PDI enhances electron generation efficiency, while the carboxylic acid groups on PDI promote electron transfer. The performance of the constructed sensor was validated using CA15-3 as a model. The experimental results showed that the sensor based on In2O3@MgIn2S4/PDI has excellent selectivity, stability, and reproducibility, and can sensitively detect CA15-3 in the range of 0.001-100 U·mL-1 with the detection limit of 0.00056 U·mL-1. The sensor has a broad application prospect. It is hoped that this research work based on the unique advantages of the organic compound PDI will inspire other researchers to design light-responsive materials and promote the development of the field of photoelectrochemical sensing.

Overview on the Development of Electrochemical Immunosensors by the Signal Amplification of Enzyme- or Nanozyme-Based Catalysis Plus Redox Cycling

Enzyme-linked electrochemical immunosensors have attracted considerable attention for the sensitive and selective detection of various targets in clinical diagnosis, food quality control, and environmental analysis. In order to improve the performances of conventional immunoassays, significant efforts have been made to couple enzyme-linked or nanozyme-based catalysis and redox cycling for signal amplification. The current review summarizes the recent advances in the development of enzyme- or nanozyme-based electrochemical immunosensors with redox cycling for signal amplification. The special features of redox cycling reactions and their synergistic functions in signal amplification are discussed. Additionally, the current challenges and future directions of enzyme- or nanozyme-based electrochemical immunosensors with redox cycling are addressed.

Sandwich-type immunosensor based on aminated 3D-rGOF-NH2 and CMK-3-Fc-MgAl-LDH multilayer nanocomposites for detection of CA125

Cancer antigen 125 (CA125)1 is the most important biological screening indicator used to monitor epithelial ovarian cancers, and it plays a vital role in distinguishing ovarian cancers from benign diseases. Biosensors show great potential in the analysis and detection of disease markers. In this study, we designed electrochemical sensors based on three-dimensional amino-functionalized reduced graphene oxide (3D-rGOF-NH2),2 MgAl layered double hydroxide nanocomposites containing ordered mesoporous carbon (CMK-3),3 and ferrocene carboxylic acids（Fc-COOH）4for the detection of CA125. 3D-rGOF-NH2 possesses good conductivity, a large surface area, and high porosity, enabling more immobilized nanoparticles to be deposited on its surface with excellent stability. CMK-3@Fc@MgAl-LDH nanocomposite was used as a carrier to enhance the immobilization of antibodies and the loading of Fc, conductors to enhance conductivity, and enhancers to gradually amplify the signal of Fc. The surface morphology, elemental composition, and surface groups of the materials were characterized using scanning electron microscopy (SEM),5 transmission electron microscopy (TEM),6 and X-ray diffraction (XRD)7 techniques. The response signal of the electrochemical sensor was measured by DPV. Under the optimal conditions, the electrochemical sensor obtained a linear detection range of 0.01 U/mL-100 U/mL with a detection limit of 0.00417 U/mL.

A paper-based photoelectrochemical aptsensor using near-infrared light-responsive AgBiS2 nanoflowers as probes for the detection of Staphylococcus aureus in pork

Staphylococcus aureus is a gram-positive bacterium that can easily cause outbreaks of food-borne diseases. In this work, a signal-enhanced three-dimensional paper-based photoelectrochemical (PEC) aptsensor for the rapid and sensitive determination of S. aureus was developed. Specifically, gold nanoparticles (AuNPs) were electrodeposited on a paper-based working electrode to provide binding sites for a sulfhydryl-functionalized aptamer. Subsequently, S. aureus was captured with high specificity by a carboxyl-functionalized aptamer modified with amino-functionalized AgBiS2 nanoflowers (NH2-AgBiS2 NFs), which functionalized as PEC probes that generated strong photocurrent under irradiation with 980-nm light. By exploiting the "aptamer-target-aptamer" PEC sensing platform, the rapid and ultrasensitive detection of S. aureus was achieved. The sensor had a wide linear range of 20 to 2 × 107 CFU/mL and low limit of detection of 4 CFU/mL. Further, the applicability of the as-prepared aptsensor was successfully certified for the analysis of pork samples artificially contaminated with S. aureus.

G-Quadruplex/Hemin-Mediated Polarity-Switchable and Photocurrent-Amplified System for Escherichia coli O157:H7 Detection

The contamination of food by pathogens is a serious problem in global food safety, and current methods of detection are costly, time-consuming, and cumbersome. Therefore, it is necessary to develop rapid, portable, and sensitive assays for foodborne pathogens. In addition, assays for foodborne pathogens must be resistant to interference resulting from the complex food matrix to prevent false positives and negatives. In this study, hemin and reduced graphene oxide-MoS2 sheets (GMS) were used to design a near-infrared (NIR)-responsive photoelectrochemical (PEC) aptasensor with target-induced photocurrent polarity switching based on a hairpin aptamer (Hp) with a G-quadruplex motif. A ready-to-use analytical device was developed by immobilizing GMS on the surface of a commercial screen-printed electrode, followed by the attachment of the aptamer. In the presence of Escherichia coli O157:H7, the binding sites of Hp with the G-quadruplex motif were opened and exposed to hemin, leading to the formation of a G-quadruplex/hemin DNAzyme. Crucially, after binding to hemin, the charge transfer pathway of GMS changes, resulting in a switch of the photocurrent polarity. Further, G-quadruplex/hemin DNAzyme enhanced the cathodic photocurrent, and the proposed sensor exhibited a wide linear range ((25.0-1.0) × 107 CFU/mL), a low limit of detection (2.0 CFU/mL), and good anti-interference performance. These findings expand the applications of NIR-responsive PEC materials and provide versatile PEC methods for detecting biological analytes, especially for food safety testing.

Mild-Photothermal Effect Induced High Efficiency Ferroptosis-Boosted-Cuproptosis Based on Cu2 O@Mn3 Cu3 O8 Nanozyme

A core-shell-structured Cu2 O@Mn3 Cu3 O8 (CMCO) nanozyme is constructed to serve as a tumor microenvironment (TME)-activated copper ionophore to achieve safe and efficient cuproptosis. The Mn3 Cu3 O8 shell not only prevents exposure of normal tissues to the Cu2 O core to reduce systemic toxicity but also exhibits enhanced enzyme-mimicking activity owing to the better band continuity near the Fermi surface. The glutathione oxidase (GSHOx)-like activity of CMCO depletes glutathione (GSH), which diminishes the ability to chelate Cu ions, thereby exerting Cu toxicity and inducing cuproptosis in cancer cells. The catalase (CAT)-like activity catalyzes the overexpressed H2 O2 in the TME, thereby generating O2 in the tricarboxylic acid (TCA) cycle to enhance cuproptosis. More importantly, the Fenton-like reaction based on the release of Mn ions and the inactivation of glutathione peroxidase 4 induced by the elimination of GSH results in ferroptosis, accompanied by the accumulation of lipid peroxidation and reactive oxygen species that can cleave stress-induced heat shock proteins to compromise their protective capacity of cancer cells and further sensitize cuproptosis. CMCO nanozymes are partially sulfurized by hydrogen sulfide in the colorectal TME, exhibiting excellent photothermal properties and enzyme-mimicking activity. The mild photothermal effect enhances the enzyme-mimicking activity of the CMCO nanozymes, thus inducing high-efficiency ferroptosis-boosted-cuproptosis.

A polyaniline functionalized NiFeP nanosheet array-based electrochemical immunosensor using Au/Cu2O nanocubes as a signal amplifier for the detection of SARS-CoV-2 nucleocapsid protein

Coronavirus disease 2019 (COVID-19) is an infectious disease caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), which emerged as a novel pathogen in 2019. The virus is responsible for a severe acute respiratory syndrome outbreak, affecting the respiratory system of infected individuals. COVID-19 is a super amplifier of basic diseases, and the disease with basic diseases is often more serious. Controlling the spread of the COVID-19 pandemic relies heavily on the timely and accurate detection of the virus. To resolve the problem, a polyaniline functionalized NiFeP nanosheet array-based electrochemical immunosensor using Au/Cu₂O nanocubes as a signal amplifier is fabricated for the detection of SARS-CoV-2 nucleocapsid protein (SARS-CoV-2 NP). Polyaniline (PANI) functionalized NiFeP nanosheet arrays are synthesized as an ideal sensing platform for the first time. PANI is coated on the surface of NiFeP by electropolymerization to enhance biocompatibility, beneficial for the efficient loading of the capture antibody (Ab₁). Significantly, Au/Cu₂O nanocubes possess excellent peroxidase-like activity and exhibit outstanding catalytic activity for the reduction of H₂O₂. Therefore, Au/Cu₂O nanocubes combine with a labeled antibody (Ab₂) through the Au-N bond to form labeled probes, which can effectively amplify current signals. Under optimal conditions, the immunosensor for the detection of SARS-CoV-2 NP shows a wide linear range of 10 fg mL^-1-20 ng mL^-1 and a low detection limit of 1.12 fg mL^-1 (S/N = 3). It also exhibits desirable selectivity, repeatability, and stability. Meanwhile, the excellent analytical performance in human serum samples confirms the practicality of the PANI functionalized NiFeP nanosheet array-based immunosensor. The electrochemical immunosensor based on the Au/Cu₂O nanocubes as a signal amplifier demonstrates great potential for application in the personalized point-of-care (POC) clinical diagnosis.

Optical and Material Characteristics of MoS2/Cu2O Sensor for Detection of Lung Cancer Cell Types in Hydroplegia

In this study, n-type MoS2 monolayer flakes are grown through chemical vapor deposition (CVD), and a p-type Cu2O thin film is grown via electrochemical deposition. The crystal structure of the grown MoS2 flakes is analyzed through transmission electron microscopy. The monolayer structure of the MoS2 flakes is verified with Raman spectroscopy, multiphoton excitation microscopy, atomic force microscopy, and photoluminescence (PL) measurements. After the preliminary processing of the grown MoS2 flakes, the sample is then transferred onto a Cu2O thin film to complete a p-n heterogeneous structure. Data are confirmed via scanning electron microscopy, SHG, and Raman mapping measurements. The luminous energy gap between the two materials is examined through PL measurements. Results reveal that the thickness of the single-layer MoS2 film is 0.7 nm. PL mapping shows a micro signal generated at the 627 nm wavelength, which belongs to the B2 excitons of MoS2 and tends to increase gradually when it approaches 670 nm. Finally, the biosensor is used to detect lung cancer cell types in hydroplegia significantly reducing the current busy procedures and longer waiting time for detection. The results suggest that the fabricated sensor is highly sensitive to the change in the photocurrent with the number of each cell, the linear regression of the three cell types is as high as 99%. By measuring the slope of the photocurrent, we can identify the type of cells and the number of cells.

3D nanointerface enhanced optical microfiber for real-time detection and sizing of single nanoparticles

Portable devices, which can detect and characterize the individual nanoparticles in real time, are of insignificant interest for early diagnosis, homeland security, semiconductor manufacturing and environmental monitoring. Optical microfibers present a good potential in this field, however, are restricted by the sensitivity limit. This study reports the development of a 3D plasmonic nanointerface, which is made of a Cu-BTC framework supporting Cu_3-xP nanocrystals, enhancing the optical microfiber for real-time detection and sizing of single nanoparticles. The Cu_3-xP nanocrystals are successfully embedded in the 3D Cu-BTC framework. The localized-surface plasmon resonance is tuned to coincide with the evanescent field of the optical microfiber. The 3D Cu-BTC framework, as the scaffold of nanocrystals, confines the local resonance field on the microfiber with three dimensions, at which the binding of target nanoparticles occurs. Based on the evanescent field confinement and surface enhancement by the nanointerface, the optical microfiber sensor overcomes its sensitivity limit, and enables the detection and sizing of the individual nanoparticles. The compact size and low optical power supply of the sensor confirm its suitability as a portable device for the real-time single-nanoparticle characterization, especially for the convenient evaluation of the ultrafine particles in the environment. This work opens up an approach to overcome the sensitivity limit of the optical microfibers, as long with stimulating the portable real-time single-nanoparticle detection and sizing.

A new electrochemical immunosensor for sensitive detection of prion based on Prussian blue analogue

Based on Co-Co Prussian blue analogue (Co-Co PBA), a novel immunosensor has been developed for sensitive detection of prion protein (PrP^C). Gold nanoparticles (AuNPs)-modified Co-Co PBA nanocubes (PBA-AuNPs) worked as a support of the antibody (Ab2) of PrP^C to obtain Ab2-PBA-AuNPs composite and also as the signal source for PrP^C assay. When PrP^C existed, Ab2-PBA-AuNPs could be introduced to the surface of another antibody of PrP^C (Ab1) modified AuNPs/GC electrode (the gold nanoparticles-modified glassy carbon electrode) through specific antigen-antibody interaction between PrP^C and its antibodies to form the Ab1-PrP^C-Ab2 sandwich structure. With the help of KOH aqueous solution, PBA generated a large DPV response. The response peak currents were linear with the logarithmic values of the concentration of PrP^C in the range from 0.075pgmL^-1 to 100pgmL^-1 with the detection limit of 0.014pgmL^-1. Also, the immunosensor showed good selectivity and reproducibility. Based on the simple sensing structure and good analytical performance, the developed immunosensor may have promising applications in practical assay of infectious isoform of prion (PrP^Sc) and other proteins by simply changing the related antibody.

Facile synthesis of MoS2@Cu2O-Pt nanohybrid as enzyme-mimetic label for the detection of the Hepatitis B surface antigen

An ultrasensitive sandwich-type electrochemical immunosensor was proposed for quantitative detection of hepatitis B surface antigen, which is a representative biomarker of the Hepatitis B virus. First, the porous graphene oxide/Au composites with good conductive ability were employed to accelerate the electron transfer on the electrode interface. Furthermore, the amino functionalized molybdenum disulfide @ cuprous oxide hybrid with coral morphology was prepared to combine platinum nanoparticles for achieving signal amplification strategy. The resulting nanocomposites (molybdenum disulfide @ cuprous oxide - platinum) demonstrated uniform coral morphology, which effectively improved the specific surface area available for loading the secondary antibody and the number of catalytically active sites, even also increased the electrical conductivity. Based on these advantages, this composite system yielded a superior electrocatalytic current response toward the reduction of hydrogen peroxide. In addition, porous graphene oxide/Au composites were used to modify the glassy carbon electrode, thereby presenting a large surface area and becoming biocompatible, for improving the loading capacity of the primary antibody. Under optimal conditions, we obtained a linear relationship between current signal and hepatitis B surface antigen concentration in the broad range from 0.5pg/mL to 200ng/mL, with a detection limit of 0.15pg/mL (signal-to-noise ratio of 3). These values are promising towards clinical applications.

Nanomaterial-based biosensors for detection of prostate specific antigen

Screening serum for the presence of prostate specific antigen (PSA) belongs to the most common approach for the detection of prostate cancer. This review (with 156 refs.) addresses recent developments in PSA detection based on the use of various kinds of nanomaterials. It starts with an introduction into the field, the significance of testing for PSA, and on current limitations. A first main section treats electrochemical biosensors for PSA, with subsections on methods based on the use of gold electrodes, graphene or graphene-oxide, carbon nanotubes, hybrid nanoparticles, and other types of nanoparticles. It also covers electrochemical methods based on the enzyme-like activity of PSA, on DNA-, aptamer- and biofuel cell-based methods, and on the detection of PSA via its glycan part. The next main section covers optical biosensors, with subsections on methods making use of surface plasmon resonance (SPR), localized SPR and plasmonic ELISA-like schemes. This is followed by subsections on methods based on the use of fiber optics, fluorescence, chemiluminescence, Raman scattering and SERS, electrochemiluminescence and cantilever-based methods. The most sensitive biosensors are the electrochemical ones, with lowest limits of detection (down to attomolar concentrations), followed by mass cantilever sensing and electrochemilumenescent strategies. Optical biosensors show lower performance, but are still more sensitive compared to standard ELISA. The most commonly applied nanomaterials are metal and carbon-based ones and their hybrid composites used for different amplification strategies. The most attractive sensing schemes are summarized in a Table. The review ends with a section on conclusions and perspectives.

Recent Advances in Electrochemical Immunosensors

Immunosensors have experienced a very significant growth in recent years, driven by the need for fast, sensitive, portable and easy-to-use devices to detect biomarkers for clinical diagnosis or to monitor organic pollutants in natural or industrial environments. Advances in the field of signal amplification using enzymatic reactions, nanomaterials such as carbon nanotubes, graphene and graphene derivatives, metallic nanoparticles (gold, silver, various oxides or metal complexes), or magnetic beads show how it is possible to improve collection, binding or transduction performances and reach the requirements for realistic clinical diagnostic or environmental control. This review presents these most recent advances; it focuses first on classical electrode substrates, then moves to carbon-based nanostructured ones including carbon nanotubes, graphene and other carbon materials, metal or metal-oxide nanoparticles, magnetic nanoparticles, dendrimers and, to finish, explore the use of ionic liquids. Analytical performances are systematically covered and compared, depending on the detection principle, but also from a chronological perspective, from 2012 to 2016 and early 2017.

A sub-picomolar assay for protein by using cubic Cu2O nanocages loaded with Au nanoparticles as robust redox probes and efficient non-enzymatic electrocatalysts

In this work, a simple and sensitive electrochemical aptasensor for protein (thrombin – TB used as the model) was developed by using cubic Cu₂O nanocages (Cu₂O-NCs) loaded with Au nanoparticles (AuNPs@Cu₂O-NCs) as non-enzymatic electrocatalysts and robust redox probes.

Self-assembly of hollow spherical nanocatalysts with encapsulated Pt NPs and the effect of Ce-dipping on catalytic activity

This article reports a facile and controllable one-step method to construct Pt@hollow mesoporous SiO₂ (Pt@HMSiO₂) nanoparticles (NPs).

Sandwich-type electrochemical immunosensor for ultrasensitive detection of prostate-specific antigen using palladium-doped cuprous oxide nanoparticles

A new and facile sandwich-type electrochemical immunosensor is proposed for the ultrasensitive detection of prostate-specific antigen (PSA) based on Au nanoparticles (Au NPs) and palladium-doped cuprous oxide nanoparticles (Pd@Cu₂O NPs).