Enzyme-controlled dissolution of MnO2 nanoflakes with enzyme cascade amplification for colorimetric immunoassay

Optimization of immobilized urease enzyme on porous polymer for enhancing the stability, reusability and enzymatic kinetics using response surface methodology

The study examines the immobilization of the urease enzyme on a range of High Internal Phase Emulsion (polyHIPE) materials, assessing characteristics, efficiency, and performance. It also investigates the impact of polyHIPE type, quantity, incubation time, and various parameters on the process and enzyme activity. Surface morphology and functional groups of polyHIPE materials were determined through scanning electron microscopy (SEM) and fourier transform infrared spectroscopy (FT-IR) analyses, revealing significant alterations after modification with polyglutaraldehyde (PGA). The maximum immobilization efficiency of 95% was achieved by adding PGA to polyHIPE materials with an incubation period of 15 h. The optimized conditions for immobilized enzyme using a Box-Behnken design (BBD) of response surface methodology (RSM) were as follows: temperature (40.8 °C), pH (7.1) and NaCl concentration (0.007 g/L). Furthermore, the immobilized enzyme demonstrated remarkable reusability, retaining 75% of its initial activity after six cycles, and sustained shelf-life stability, retaining over 40% activity after 10 days at room temperature. Kinetic analyses revealed that immobilized urease exhibited higher affinity for the substrate, but lower rate of substrate conversion compared to the free enzyme. These findings offer valuable insights into optimizing urease immobilization processes and enhancing urease stability and activity, with potential applications in various fields, including biotechnology and biocatalysis.

Novel Immunosensor Based on Metal Single-Atom Nanozymes with Enhanced Oxidase-Like Activity for Capsaicin Analysis in Spicy Food

Capsaicin (CAP) is a primary indicator for assessing the level of pungency. Herein, iron-based single-atom nanozymes (SAzymes) (Fe/NC) with exceptional oxidase-like activity were used to construct an immunosensor for CAP analysis. Fe/NC could imitate oxidase actions by transforming O2 to •O2- radicals in the absence of hydrogen peroxide (H2O2), which could avoid complex operations and unstable results. By regulating the Fe atom loads, an optimal Fe0.7/NC atom usage rate could improve the catalytic activity (Michaelis-Menten constant (Km) = 0.09 mM). Fe0.7/NC was integrated with goat antimouse IgG by facile mix incubation to develop a competitive enzyme-linked immunosorbent assay (ELISA). Our Fe0.7/NC immunosensing platform is anticipated to outperform the conventional ELISA in terms of stability and shelf life. The proposed immunosensor provided color responses across 0.01-1000 ng/mL CAP concentrations, with a detection limit of 0.046 ng/mL. Fe/NC may have potential as nanozymes for CAP detection in spicy foods, with promising applications in food biosensing.

Recent Advancements in Molecularly Imprinted Polymers Based Aptasensors: Critical Role of Nanomaterials for the Efficient Food Safety Analysis

Biosensors are being studied extensively for their ability to detect and analyze molecules. There has been a growing interest in combining molecular imprinted polymers (MIPs) and aptamers to create hybrid recognition elements that offer advantages such as target binding, sensitivity, selectivity, and stability. These hybrid elements have been successfully used in identifying a wide range of analytes in food samples. However, the application of MIP-based aptasensors in different sensing approaches is still challenging due to the low conductivity of MIPs-aptamers and limited adsorption capacity of MIPs. To address these limitations, researchers have been exploring the use of nanomaterials (NMs) to design efficient multiple-recognition systems that exploit the synergies between aptamers and MIPs. These hybrid systems can enhance the sensitivity and selectivity of MIP-based aptasensors in quantifying analytical samples. This review provides a comprehensive overview of recent advancements in the field of MIP-based aptasensors. It also introduces technologies that combine MIPs and aptamers to achieve higher sensitivity and selectivity in quantifying analytical samples. The review also highlights potential future trends and practical approaches that can be employed to address the limitations of MIP-based aptasensors, including the use of new NMs, the development of new fabrication techniques, and the integration of MIP-based aptasensors with other analytical tools.

CoMnOx Nanoflower-Based Smartphone Sensing Platform and Virtual Reality Display for Colorimetric Detection of Ziram and Cu2

Transition metal doping is an ideal strategy to construct multifunctional and efficient nanozymes for biosensing. In this work, a metal-doped CoMnOx nanozyme was designed and synthesized by hydrothermal reaction and high-temperature calcination. Based on its oxidase activity, an "on-off-on" smartphone sensing platform was established to detect ziram and Cu2+. The obtained flower-shaped CoMnOx could exhibit oxidase-, catalase-, and laccase-like activities. The oxidase activity mechanism of CoMnOx was deeply explored. O2 molecules adsorbed on the surface of CoMnOx were activated to produce a large amount of O2·-, and then, O2·- could extract acidic hydrogen from TMB to produce blue oxTMB. Meanwhile, TMB was oxidized directly to the blue product oxTMB via the high redox ability of Co species. According to the excellent oxidase-like activity of CoMnOx, a versatile colorimetric detection platform for ziram and Cu2+ was successfully constructed. The linear detection ranges for ziram and Cu2+ were 5~280 μM and 80~360 μM, and the detection limits were 1.475 μM and 3.906 μM, respectively. In addition, a portable smartphone platform for ziram and Cu2+ sensing was established for instant analysis, showing great application promise in the detection of real samples including environmental soil and water.

Solvent directed morphogenesis of a peptidic-benzimidazolium dipodal receptor: ratiometric detection and catalytic degradation of ochratoxin A

Ochratoxin A (OTA) is the most abundant and harmful toxin found in agriculture and processed food. The environment and human health are both harmed by this mycotoxin. As a result, in various scenarios, selective detection and biodegradation of ochratoxin A are essential. The current study reveals the morphogenesis of a peptidic-benzimidazolium dipodal receptor (SS4) and its application as a catalytic and sensing unit for the detection and degradation of OTA in an aqueous medium. Initially, a facile and scalable method was executed to synthesize SS4, and solvent-directed morphogenesis were examined under SEM analysis. Consequently, molecular recognition properties of self-assembled architectures were explored using UV-visible absorption, fluorescence spectroscopy, and atomic force microscopy (AFM). The designed probe showed a ratiometric response for OTA and served as a catalytic unit for the degradation of OTA at a short interval of 25 min. The biodegradation pathway for OTA was accomplished using LC-MS analysis. Furthermore, the reliability of the developed method was checked by determining the spiked concentrations of the OTA in cereals and wine samples. The results obtained are in good agreement with the % recovery and RSD values. The present work provides a robust, selective, and sensitive method of detection and degradation for OTA.

Production of AFB1 High-Specificity Monoclonal Antibody by Three-Stage Screening Combined with the De-Homologation of Antibodies and the Development of High-Throughput icELISA

To achieve accurate detection of AFB1 toxin content in agricultural products and avoid false-positive rates in the assays, the specificity of mAbs is critical. We improved the specificity of the prepared monoclonal antibodies by modifying the traditional limiting dilution subcloning method. The traditional finite dilution method was modified with three-stage screening (the trending concentration of standards used in the screening is low-high-low) to achieve high specificity in pre-cell screening and increased the number of subclones to 10 to achieve the de-homologation of antibodies. A modified limiting dilution obtained a highly specific AFB1 monoclonal cell line, ZFG8, with a 50% inhibition concentration (IC50) of 0.3162 ng/mL. Notably, it exhibited the highest specificity compared to anti-AFB1 monoclonal antibodies prepared by other investigators. The maximum cross-reactivity of the mAb with structural analogues for AFB2, AFG1, AFG2, and AFM1 was 0.34%. The results showed that this type of screening improves the monoclonal antibodies' specificity. Based on this ZFG8 monoclonal antibody, an icELISA assay was established with an IC50 of 0.2135 ng/mL for AFB1. The limit of the linear detection range of icELISA is 0.0422-1.29267 ng/mL with reasonable specificity and precision. The recoveries of AFB1 in samples of corn flour and wheat meal ranged from 84 to 107%, with CVs below 9.3%. The recoveries of structural analogues (AFB2, AFM1, AFG1, and AFG2) were less than 10% in both corn flour and wheat meal. The results showed that the prepared AFB1 monoclonal antibody could accurately and specifically recognize AFB1 residues in agricultural products while ignoring the effects of other structural analogues.

Development of a separation platform comprising magnetic beads combined with the CRISPR/Cas12a system enabling ultrasensitive and rapid detection of miRNA-21

A separation platform has been developed mediated by a combination of magnetic beads and the CRISPR/Cas12a system to achieve ultrasensitive and rapid detection of miRNA-21 at a low level. In this system, with the assistance of an auxiliary probe, the target miRNA-21 can be specifically combined with three-stranded probes to initiate the SDR reaction. Abundant aptamer A3 was added to the solution that can activate the CRISPR/Cas12a system and initiate the trans-cleavage reaction to recover the fluorescence signal. Using magnetic beads to mediate the separation considerably greatly improves the signal conversion efficiency and detection sensitivity. At the 492 nm excitation wavelength, and 502-650 nm scan range, through analyzing the fluorescence peak intensity at 520 nm, the biosensor's determination range and limit of detection is 8 fM-250 nM and 2.42 fM, respectively, and the RSD is 19.03-37.80. Compared with other biosensors, the biosensor developed exhibited superior performance and the signal recovered excellently in 1% human serum and the LOD is 12.12 fM. This method provides a novel highly sensitive scheme for detecting miRNA .

Strategies to control mycotoxins and toxigenic fungi contamination by nano-semiconductor in food and agro-food: a review

Mycotoxins are toxic secondary metabolites generated from toxigenic fungi in the contaminated food and agro-food, which have been regarded as a serious threat to the food safety and human health. Therefore, the control of mycotoxins and toxigenic fungi contamination is of great significance and has attracted the increasing attention of researchers. As we know, nano-semiconductors have many unique properties such as large surface area, structural stability, good biocompatibility, excellent photoelectrical properties, and low cost, which have been developed and applied in many research fields. Recently, nano-semiconductors have also been promisingly applied in mitigating or controlling mycotoxins and toxigenic fungi contaminations in food and agro-food. In this review, the type, occurrence, and toxicity of main mycotoxins in food and agro-food were introduced. Then, a variety of strategies to mitigate the mycotoxin contamination based on nano-semiconductors involving mycotoxins detection, inhibition of toxigenic fungi, and mycotoxins degradation were summarized. Finally, the outlook, opportunities, and challenges have prospected in the future for the mitigation of mycotoxins and toxigenic fungi based on nano-semiconductors.

Colorimetric and photothermal immunosensor for sensitive detection of cancer biomarkers based on enzyme-mediated growth of gold nanostars on polydopamine

BACKGROUND

Detecting cancer biomarker levels in body fluids is essential for medical diagnosis. Enzyme-linked immunosorbent assay (ELISA) has been broadly used to detect cancer biomarkers. However, colorimetric ELISA based solely on nanoparticles (NPs) are susceptible to environmental influences, which often results in the detection inaccuracy, being limited in clinical applications. In this regard, the dual-mode approach would add signal diversity to the detection, making the results more reliable.

RESULTS

We present colorimetric and photothermal immunosensor that enables direct reading of the color and temperature of the solution. A core-satellite nanoprobe constructed by polydopamine (PDA) as the core and gold seeds as satellites is rationally designed as the signal reporter. When ascorbic acid is present in the solution, PDA can cooperate with ascorbic acid to reduce chloroauric acid and mediate the growth of gold seeds on the PDA surface, inducing a redshift of the localized surface plasmon resonance peak of the nanosensor and the change in photothermal conversion efficiency. The method is further combined with the sandwiched immunoassay to construct an alkaline phosphatase based colorimetric and photothermal ELISA for the highly sensitive and accurate evaluation and detection of prostate-specific antigen (PSA). The linear range was from 0.05 to 100 ng mL-1 with a detection limit of 6.71 pg mL-1 for the colorimetric detection, while the linear range was from 0.5 to 90 ng mL-1 with a detection limit of 0.13 ng mL-1 in the photothermal analysis. The accurate detection of PSA levels in serum samples was well demonstrated with the dual-mode approach.

SIGNIFICANCE

The presented immunoassay allows straightforward, sensitive, and selective readout by color and temperature without advanced instrumentation. Particularly, the LOD was much lower than the threshold in clinical trials for PSA. Therefore, this method has a great prospect in the early diagnosis of cancer biomarkers based on a dual-mode multifunctional platform.

Enantioselective Target Transport-Mediated Nanozyme Decomposition for the Identification of Reducing Enantiomers in Asymmetric Nanochannel Arrays

Enantioselective identification of chiral molecules is regarded as one of the key issues in biological and medical sciences because of their configuration-dependent effects on biological systems. In this study, we developed an electrochemical platform based on a tandem recognition-reaction zone design in TiO2 nanochannels for the specific recognition of reducing enantiomers. In this system, MIL-125(Ti) Ti-metal-organic frameworks, in situ grown in TiO2 nanochannels, provided a homochiral recognition environment via postmodification with l-tartaric acid (l-TA); MnO2 nanosheets possessing both glucose oxidase (GOD)- and peroxidase (POD)-mimicking activities served as the target-reactive zone at the end of the nanochannels. The use of penicillamine (Pen) enantiomers as model-reducing targets facilitated the passage of d-Pen through the homochiral recognition zone, owing to its lower affinity with l-TA. The passed Pen molecules reached the responsive zone and induced a target concentration-dependent MnO2 disassembly. Such target recognition event impaired the cascade GOD- and POD-like activities of MnO2. Combining the enantioselectivity of the recognition nanochannels with the cascade enzyme-like activity of MnO2 toward glucose and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate), the quantitative identification of l- and d-Pen was achieved through the changes in transmembrane ionic current induced by the generated charged products. This recognition-reaction zone design paves an effective way for developing a promising electrochemical platform for the identification of reducing enantiomers with improved selectivity and sensitivity.

A Review of Sensing Applications of Molecularly Imprinted Fluorescent Carbon Dots for Food and Biological Sample Analysis

Molecularly imprinted fluorescent carbon dots (MI-FCDs) find numerous applications in analytical chemistry due to their outstanding photoluminescent properties and having specific pockets for the recognition of target molecules. Despite significant advances, practical applications of MI-FCDs-based fluorescent sensors are still in their initial stages. Therefore, the topical developments in the synthesis, working, and application of MI-FCDs for sensing various target species (e.g., pharmaceuticals, biomolecules, pesticides, food additives, and miscellaneous species) in food and biological media have been highlighted. Moreover, a careful evaluation has been made to select the best methods based on their performance in terms of analytical parameters. To expand the horizons of this field, important challenges and future directions for developing MI-FCDs for practical use are also presented. This review will highlight important aspects of MI-FCDs-based fluorescent sensors for their applicability in food science, material science, environmental science, nanoscience, and biotechnology.

Ratiometric Fluorescence Immunoassay Based on MnO2 Nanoflakes for Sensitive and Accurate Detection of Tricaine

Tricaine is a common anesthetic used in the long-distance transport of live fish. Recently, its negative impact on human health has aroused extensive concern. Thus, rapid and reliable techniques for tricaine residue analysis are essential to ensuring the quality of aquatic products. Herein, a specific anti-tricaine monoclonal antibody (Mab) was prepared. Then, a sensitive and robust ratiometric fluorescence ELISA (RF-ELISA) was constructed for detecting tricaine based on two MnO₂ nanoflake-mediated (MnO₂ NFs) fluorogenic reactions. In the RF-ELISA protocol, MnO₂ NFs with oxidase-like activity can trigger the formation of fluorescent 2,3-diaminophenazine (oxOPD) with an emissive peak at 570 nm from non-fluorescent o-phenylenediamine (OPD), while ascorbic acid (AA) can decompose MnO₂ NFs to lose their oxidase-mimicking activity, which is accompanied by the oxidation of AA into dehydroascorbic acid (DHAA). The subsequent reaction between the generated DHAA and OPD will result in the production of 3-(1,2-dihydroxy ethyl)furo[3,4-b]quinoxalin-1(3H)-on (DFQ), which has a potent emission peak at 445 nm. By virtue of the alkaline phosphatase (ALP) labeled on the antibody, which can catalyze the production of AA from ascorbic acid 2-phosphate (AAP), the concentration of tricaine can be linked to the variation of the RF signal (F₄₄₅/F₅₇₀) via a competitive immunoreaction. After optimization, RF-ELISA displayed a detection limit (LOD) of 0.28 ng/mL toward tricaine (in buffer solution), which was 376-fold lower than that of the traditional colorimetric ELISA. For practical application, the LODs of RF-ELISA for tricaine detection in shrimp and tilapia samples were determined to be 2.8 and 5.6 ng/g, respectively. Recoveries for spiked shrimp and tilapia samples, as well as the validation data from LC-MS/MS, showed that RF-ELISA exhibited good accuracy, precision, and reliability. This RF-ELISA protocol opened up new ways for tricaine and other-target analyses in food safety detection.

Latest strategies for rapid and point of care detection of mycotoxins in food: A review

Mycotoxins contaminated in agricultural products are often highly carcinogenic and genotoxic to humans. With the streamlining of the food industry chain and the improvement of food safety requirements, the traditional laboratory testing mode is constantly challenged due to the expensive equipment, complex operation steps, and lag in testing results. Therefore, rapid detection methods are urgently needed in the food safety system. This review focuses on the latest strategies that can achieve rapid and on-site testing, with particular attention to the nanomaterials integrated biosensors. To provide researchers with the latest trends and inspiration in the field of rapid detection, we summarize several strategies suitable for point of care testing (POCT) of mycotoxins, including enzyme-linked immunoassay (ELISA), lateral flow assay (LFA), fluorescence, electrochemistry, and colorimetry assay. POCT-based strategies are all developing towards intelligence and portability, especially when combined with smartphones, making it easier to read signals for intuitive access and analysis of test data. Detection performance of the devices has also improved considerably with the integration of biosensors and nanomaterials.

Advanced biosensors for mycotoxin detection incorporating miniaturized meters

Advanced biosensors, considered as emerging technologies, are capable of accurate, quantitative and real-time analysis for point-of-care testing (POCT) applications. Moreover, the integrating of miniaturized meters into these advanced biosensors makes them ideally appropriate for portable, sensitive and selective detection of biomolecules. Miniaturized meters including PGMs (personal glucose meters), thermometer, pressuremeter, pH meter, etc. are the most accurate devices and wide availability in the market, exhibiting a promising potential towards detection of small molecule mycotoxins. In this article, we introduce and analyze the recent advancements for sensing of mycotoxins measured by handheld meters since the first report in 2012. Furthermore, limitations and challenges for versatile meters application against mycotoxins in food matrix are highlighted. By overcoming the bottleneck problems, we believe the miniaturized meters-based biosensor platform will provide great possibilities for mycotoxins analysis and launch them to the market.

Novel rapid coordination of ascorbic acid 2-phosphate and iron(III) as chromogenic substrate system based on Fe2O3 nanoparticle and application in immunoassay for the colorimetric detection of carcinoembryonic antigen

This work for the first time reports on a simple and rapid colorimetric immunoassay with rapid coordination of ascorbic acid 2-phosphate (AAP) and iron (III) for determination of carcinoembryonic antigen (CEA, used as a model) by using Fe₂O₃ nanoparticle based-chromogenic substrate system. The signal was produced rapidly (1 min) from the coordination of AAP and iron (III) with color development of colorless to brown. TD-DFT calculation methods were employed to simulate the UV-Vis spectra of AAP-Fe²⁺ and AAP-Fe³⁺ complexes. Moreover, Fe₂O₃ nanoparticle could be dissolved with the aid of acid, thereby releasing free iron (III). Herein, a sandwich-type immunoassay was established based on Fe₂O₃ nanoparticle as labels. As target CEA concentration increased, the number of Fe₂O₃ labelled-antibodies (bound specifically) increased, resulting in loading more Fe₂O₃ nanoparticle on platform. The absorbance increased as the number of free iron (III), derived from Fe₂O₃ nanoparticle, increased. So, the absorbance of reaction solution is positively correlated with antigen concentration. Under optimal conditions, the current results showed good performance for CEA detection in the range 0.02-10.0 ng/mL with a detection limit of 11 pg/mL. Moreover, the repeatability, stability, and selectivity of the colorimetric immunoassay were also acceptable.

The influence of substrates addition order on colorimetric assay based on MnO2 nanocubes: A novel turn-off H2O2 assay strategy in water-soak foods

Herein, novel MnO₂ nanocubes were facilely synthesized by manipulating the dosage of KMnO₄ and l-Dopa with the aid of ultrasound. The as-prepared MnO₂ nanocubes exhibited interesting oxidation activity which was influenced by the addition order of substrates (H₂O₂ and 3,3,5,5-tetramethylbenzidine (TMB)). After the mechanism study, we found that H₂O₂ and TMB can be competitively oxidized by MnO₂ nanocubes, which was different from the peroxidase- and oxidase-like activities. According to the discovery, a novel turn-off H₂O₂ assay method based on MnO₂ nanocubes was established, where H₂O₂ was firstly incubated with MnO₂ nanocubes for 3 min and then TMB was added for the instantaneous chromogenic reaction. In addition to the shorter operation time, the colorimetric results were less affected by temperature and unchanged within 30 min without terminating reaction. Moreover, the method showed ultra-high sensitivity with low limit of detection (0.027 μmol L^-1) and acceptable reliability for H₂O₂ assay in water-soak foods.

Au@SiO2 SERS nanotags based lateral flow immunoassay for simultaneous detection of aflatoxin B1 and ochratoxin A

Agricultural products are frequently contaminated by mycotoxins. Multiplex, ultrasensitive, and rapid determination of mycotoxins is still a challenging problem, which is of great significance to food safety and public health. Herein, a surface-enhanced Raman scattering (SERS) based lateral flow immunoassay (LFA) for the simultaneous on-site determination of aflatoxin B₁ (AFB₁) and ochratoxin A (OTA) on the same test line (T line) was developed, in this study. In practice, two kinds of Raman reporters 4-mercaptobenzoic acid (4-MBA), and 5,5'-dithiobis-(2-nitrobenzoic acid) (DTNB) encoded silica-encapsulated gold nanotags (Au^4-MBA@SiO₂ and Au^DNTB@SiO₂) were used as detection markers to identify the two different mycotoxins. Through systematic optimization of the experimental conditions, this biosensor has high sensitivity and multiplexing with the limits of detection (LODs) at 0.24 pg mL^-1 for AFB₁ and 0.37 pg mL^-1 for OTA. These are far below the regulatory limits set by the European Commission, in which the minimum LODs for AFB₁ and OTA are 2.0 and 3.0 μg kg^-1. In the spiked experiment, the food matrix are corn, rice, and wheat, and the mean recoveries of the two mycotoxins ranged from 91.0% ± 6.3%-104.8% ± 5.6% for AFB₁ and 87.0% ± 4.2%-112.0% ± 3.3% for OTA. These results demonstrate that the developed immunoassay has good stability, selectivity, and reliability, which can be used for routine monitoring of mycotoxin contamination.

Smartphone-Facilitated Mobile Colorimetric Probes for Rapid Monitoring of Chemical Contaminations in Food: Advances and Outlook

Smartphone-derived colorimetric tools have the potential to revolutionize food safety control by enabling citizens to carry out monitoring assays. To realize this, it is of paramount significance to recognize recent study efforts and figure out important technology gaps in terms of food security. Driven by international connectivity and the extensive distribution of smartphones, along with their built-in probes and powerful computing abilities, smartphone-based sensors have shown enormous potential as cost-effective and portable diagnostic scaffolds for point-of-need tests. Meantime, the colorimetric technique is of particular notice because of its benefits of rapidity, simplicity, and high universality. In this study, we tried to outline various colorimetric platforms using smartphone technology, elucidate their principles, and explore their applications in detecting target analytes (pesticide residues, antibiotic residues, metal ions, pathogenic bacteria, toxins, and mycotoxins) considering their sensitivity and multiplexing capability. Challenges and desired future perspectives for cost-effective, accurate, reliable, and multi-functions smartphone-based colorimetric tools have also been debated.

Dual-signal output fluorescent aptasensor based on DNA programmability and gold nanoflowers for multiple mycotoxins detection

Herein, a dual-signal output fluorescent aptamer sensor was constructed for the simultaneous detection of aflatoxin B₁ (AFB₁) and ochratoxin A (OTA) using the specific recognition ability of aptamers and the programmability of DNA. A functional capture probe (cDNA) was designed with the black hole quenching motif BHQ1 labeled at the 5' end and biotin (bio) labeled at the 3' end. The fluorescent dye Cy3-labeled aflatoxin B1 aptamer (AFB₁-Apt) and the carboxyfluorescein FAM-labeled ochratoxin A aptamer (OTA-Apt) were used as two fluorescent probes. The cDNA is anchored to the quenching material gold nanoflowers (AuNFs) by the action of streptavidin (SA) and biotin. Its ends can be complementarily paired with two fluorescent probe bases to form a double-stranded structure. The fluorescence of Cy3 was quenched by AuNFs, and the fluorescence of FAM was quenched by BHQ1 through the fluorescence energy resonance transfer (FRET) effect, forming a fluorescence quenching system. Due to the high affinity of the target and the aptamer, the structure of the aptamer probe changes and detaches from the sensor when AFB₁ and OTA are present, resulting in enhanced fluorescence. Under optimal conditions, the linear range of AFB₁ was 0.1-100 ng/mL (R² = 0.996), the limit of detection (LOD) was as low as 0.014 ng/mL, and the limit of quantification (LOQ) was 0.046 ng/mL. The linear range of OTA was 0.1-100 ng/mL (R² = 0.995), the limit of detection (LOD) was as low as 0.027 ng/mL, and the limit of quantification (LOQ) was 0.089 ng/mL. The sensor had high accuracy in detecting both AFB₁ and OTA in real sample analysis. The results of the t test show that there is no significant difference between the results of this study and the high-performance liquid phase (HPLC) method, indicating that the prepared sensor can be used as a potential platform for multiple mycotoxins detection.

2D Co3O4 modified by IrO2 nanozyme for convenient detection of aqueous Fe2+ and intercellular H2O2

A portable sensor for visual monitoring of Fe²⁺ and H₂O₂, two-dimensional Co₃O₄ modified by nano-IrO₂ (IrO₂@2D Co₃O₄) was prepared in this work, for the first time, with the help of microwave radiation at 140 °C, which was further stabilized onto common test strips. The present IrO₂@2D Co₃O₄ possessed superior dual-function enzyme-like activity with low toxicity and excellent biocompatibility. Especially, trace Fe²⁺ and H₂O₂ could exclusively alter their enzyme-like catalytic activity with discriminating hyperchromic or hypochromic effect, i.e., from blue to colorless or to dark blue for both IrO₂@2D Co₃O₄ dispersion and its functionalized test strips. The linear regression equations were A₆₅₂ = 0.5940 - 0.00041 c_Fe²⁺ (10^-8 M, R² = 0.9927) for Fe²⁺ and ∆A₆₅₂ = 0.0023 c_H2O2 + 0.00025 (10^-7 M, R² = 0.9982) for H₂O₂, respectively. When applied to visual monitoring of aqueous Fe²⁺ and intercellular H₂O₂, the recoveries were 101.2 ~ 102.5% and 95.8 ~ 103.7% with detection limits of 1.25 × 10^-8 mol/L and 1.02 × 10^-7 mol/L, respectively, far below the permitted values in drinking water set by the World Health Organization. The mechanisms for the enhancing enzyme-mimetic activity of IrO₂@2D Co₃O₄ and its selective responses to Fe²⁺ and H₂O₂ were investigated in detail.

Surface Plasmon Resonance (SPR) biosensor for detection of mycotoxins: A review

Mycotoxin is one of the most important natural pollutants, which poses a global threat to food safety. However, the pollution of mold in food production is inevitable. The detection technology of mycotoxins in food production is an important means to prevent the damage of mycotoxins, so rapid detection and screening to avoid pollution diffusion is essential. The focus of this review is to update the literature on the detection of mycotoxins by surface plasmon resonance (SPR) technology, rather than just traditional chromatographic methods. As a relatively novel and simple analytical method, SPR has been proved to be fast, sensitive and label-free, and has been widely used in real-time qualitative and quantitative analysis of various pollutants. This paper aims to give a broad overview of the sensors for detection and analysis of several common mycotoxins.

Plasma-assisted in-situ preparation of L-cystine functionalized silver nanoparticle: An intelligent multicolor nano-sensing of cadmium and paracetamol from environmental sample

L-cystine (L-cys) functionalized plasmonic silver nanomaterial (Ag NPs) was fabricated toward the selective and sensitive detection of paracetamol and cadmium. The prepared L-cys-Ag nanoparticles (NPs) were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction spectroscopy (XRD) and fourier transform infrared spectroscopy (FTIR) analyses. SEM imaging show that Ag NPs was decorated on the surface of L-cysteine 3D cubic nanosheet. L-cys-Ag NPs showed selective and sensitive detection towards paracetamol and cadmium. The interference study confirms that the presence of other metal ions didn't inhibit the detection of cadmium by L-cys-Ag NPs. The limit of detection of paracetamol and cadmium by L-cys-Ag NPs was calculated to be 1.2 and 2.82 nM respectively. In addition, the real sample detection of paracetamol on blood serum and urine, and cadmium on STP were performed and the recovery percentage was above 97%. Further, the real sample analysis was performed in tap and drinking water and the recovery percentage was more than 98%. The analytic logic gate on the multicolour detection of cadmium and paracetamol was performed for the semi-quantitative monitoring of paracetamol and cadmium by L-cys-Ag NPs. The developed L-cys-Ag NPs were found to be an effective tool for the monitoring of cadmium in environmental water bodies and paracetamol in blood and urine.

Screen-printed electrochemical immunosensor based on a novel nanobody for analyzing aflatoxin M1 in milk

This study aimed to devise a nontoxic electrochemical immunosensor to quantitatively determine aflatoxin M₁ by chronoamperometry with novel anti-idiotypic nanobody-functionalized screen-printed carbon electrodes (SPCEs). Anti-idiotype nanobodies (AIdnb) were developed to replace the high toxic chemically synthesized antigen. AIdnb was immobilized on the surface of SPCE via covalent coupling as capture reagent. The functionalized SPCEs were followed by characterization using electrochemical impedance spectroscopy, fourier-transform infrared spectroscopy, transmission electron microscopy mapping, and atomic force microscopy. After optimizing experimental parameters, the assembled immunosensor exhibited a good linearity range of 0.25-5.0 ng/mL, with the limit of detection of 0.09 ng/mL. The immunosensor showed a satisfactory selectivity to AFM₁, without interference from analogs, including zearalenone, ochratoxin, and fumonisin B₁. For practical application, the developed immunosensor was validated using real spiked samples with the recovery range 82.0%-108.0% and relative standard deviation (RSD) 10.1%-13.0%, indicating that it could be used in milk samples.

Nanozyme-strip based on MnO2 nanosheets as a catalytic label for multi-scale detection of aflatoxin B1 with an ultrabroad working range

Lateral flow immunoassay (LFIA) is the most effective real-time detection method for aflatoxin B₁ (AFB₁). Here, we constructed a nanozyme-strip based on MnO₂ nanosheets (MnO₂ NSs) as a catalytic label for detection of AFB₁. By taking advantage of the MnO₂-TMB catalytic amplified system, the new test achieves rapid detection with high sensitivity and ultrawide range. The limit of detection of the assay was 15 pg mL^-1, which was over 100-fold lower than the maximum limit set by the European Union (EU) of AFB₁ in foods. In addition, the strip test could offer 7 dynamic detection ranges, spanning 4 orders of magnitude, which could cater to the varieties of limits on AFB₁ residues in foods and feeds set by different countries. The estimated recoveries were in the range of 85.67%-106.38% with coefficients of variations (CVs) less than 9.68%. Overall, the developed approach is a rapid, reliable, sensitive and widely available tool for on-site detection of AFB₁.

Application of Nanomaterials for Coping with Mycotoxin Contamination in Food Safety: From Detection to Control

Mycotoxins, which are toxic secondary metabolites produced by fungi, are harmful to humans. Mycotoxin-induced contamination has drawn attention worldwide. Consequently, the development of reliable and sensitive detection methods and high-efficiency control strategies for mycotoxins is important to safeguard food industry safety and public health. With the rapid development of nanotechnology, many novel nanomaterials that provide tremendous opportunities for greatly improving the detection and control performance of mycotoxins because of their unique properties have emerged. This review comprehensively summarizes recent trends in the application of nanomaterials for detecting mycotoxins (fluorescence, colorimetric, surface-enhanced Raman scattering, electrochemical, and point-of-care testing) and controlling mycotoxins (inhibition of fungal growth, mycotoxin absorption, and degradation). These detection methods possess the advantages of high sensitivity and selectivity, operational simplicity, and rapidity. With research attention on the control of mycotoxins and the gradual excavation of the properties of nanomaterials, nanomaterials are also employed for the inhibition of fungal growth, mycotoxin absorption, and mycotoxin degradation, and impressive controlling effects are obtained. This review is expected to provide the readers insight into this state-of-the-art area and a reference to design nanomaterials-based schemes for the detection and control of mycotoxins.

Enzyme-controllable just-in-time production system of copper hexacyanoferrate nanoparticles with oxidase-mimicking activity for highly sensitive colorimetric immunoassay

Nanozymes are a series of elaborately designed nanomaterials that can mimic the catalytic sites of natural enzymes for reactions. Bypassing the tedious design and preparation of nanomaterial, in this work, we report on a novel just-in-time production system of copper hexacyanoferrate nanoparticles (CHNPs), which act as an oxidase-mimicking nanozyme. This system can rapidly produce CHNPs nanozyme on demand by simply mixing Cu(II) with potassium hexacyanoferrate(III) (K₃[Fe(CN)₆]). It is found that once K₃[Fe(CN)₆] is reduced to K₄[Fe(CN)₆], the formation of CHNPs is inhibited. Therefore, the just-in-time production system of CHNPs was coupled with alkaline phosphatase (ALP) to construct an enzyme-controllable just-in-time production (ECJP) system, in which ALP could inhibit the production of by catalyzing the hydrolysis of ascorbic acid 2-phosphate (AAP) to generating ascorbic acid (AA). The ECJP system is then used to probe the activity of ALP by employing 2,2'-azinobis-(3-ethylbenzthiazoline-6-sulphonate) (ABTS) as the chromogenic substrate, and a detection limit of 0.003 U L^-1 was achieved. Moreover, by adapting ALP as the enzyme label, an ECJP system-based colorimetric immunoassay protocol was established for sensitive detection of aflatoxin B₁ (AFB₁), and a detection limit as low as 0.73 pg mL^-1 was achieved. The developed immunoassay method is successfully applied to the detection of AFB₁ in peanut samples. The operation of ECJP system is quite simple and the coupling of ALP with CHNPs nanozyme can arouse dual enzyme-like cascade signal amplification. So, we believe this work can offer a new perspective for the development of nanozymes-based biodetection methods and colorimetric immunoassay strategies.

Visual detection of aflatoxin B1 based on specific aptamer recognition combining with triple amplification strategy

A highly sensitive and specific visual detection method for aflatoxin B1 (AFB1) based on the target specificity of aptamer, rolling circle amplification (RCA) and enzyme catalysis biological amplification effect has been established. In this work, AFB1 aptamer immobilized on the surface of magnetic beads (MB) serves as a molecular recognition probe. In the absence of AFB1, the aptamer and auxiliary linking probe (LP) maintain a double stranded state due to partial base pair complementarities. By contrast, in the presence of AFB1, the aptamer preferentially binds to AFB1 specifically, and the LP later restores to a single stranded state. Subsequently, the RCA reaction is triggered by above-mentioned single stranded LP to generate long DNA strands, which are employed to capture amounts of signal probes (SP) and horse radish peroxidases (HRP). Finally, amounts of HRP catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) by H₂O₂ and leads to a dramatic color change of the solution from colorlessness to deep blue as a signal indicator, obtaining a high sensitivity, high specificity and visual detection of AFB1. Under optimal conditions, a good linear detection range (0.5-40 pg·mL^-1) was achieved, and the limit of detection (LOD) was 0.13 pg·mL^-1. Besides, the proposed aptasensor showed excellent specificity for AFB1 compared with five other mycotoxins. More than that, all reactions occur on the surface of the magnetic beads, which not only facilitates the detection operation process including the efficient isolation and collection of AFB1 from sample matrix, but also gets better selectivity and stronger resistibility to target analyte in complex sample matrix, adequately indicating its potential application in AFB1 practical detection.

Advances in Chicken IgY-Based Immunoassays for the Detection of Chemical and Biological Hazards in Food Samples

As antibodies are the main biological binder for hazards in food samples, their performance directly determines the sensitivity, specificity, and reproducibility of the developed immunoassay. The overwhelmingly used mammalian-derived antibodies usually suffer from complicated preparation, high cost, frequent bleeding of animals, and sometimes low titer and affinity. Chicken yolk antibody (IgY) has recently attracted considerable attention in the bioanalytical field owing to its advantages in productivity, animal welfare, comparable affinity, and high specificity. However, a broad understanding of the application of IgY-based immunoassay for the detection of chemical and biological hazards in food samples remains limited. Here, we briefly summarized the diversity, structure, and production of IgY including polyclonal and monoclonal formats. Then, a comprehensive overview of the principles, designs, and applications of IgY-based immunoassays for these hazards was reviewed and discussed, including food-borne pathogens, food allergens, veterinary drugs, pesticides, toxins, endocrine disrupting chemicals, etc. Thus, the trend of IgY-based immunoassays is expected, and more IgY types, higher sensitivity, and diversification of recognition-to-signal manners are necessary in the future.

Development of an electrochemical aptasensor based on Au nanoparticles decorated on metal-organic framework nanosheets and p-biphenol electroactive label for the measurement of aflatoxin B1 in a rice flour sample

This study purposes designing a new aptasensor to detect aflatoxin B1 (AFB1). The AFB1 aptasensor was developed by growing gold nanoparticles on the surface of nickel-based metal-organic framework nanosheets (AuNPs/Ni-MOF) and an electroactive indicator (p-biphenol, PBP). The AFB1 aptamer was immobilized on the AuNPs/Ni-MOF and then hybridized with the complementary DNA (cDNA). PBP was intercalated within the double helix of the cDNA-aptamer. The difference between electrochemical responses of intercalated PBP before and after incubation of AFB1 with the immobilized aptamer was considered as an analytical response. Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) were used to monitor the construction processes of the aptasensor. By recording the differential pulse voltammograms of PBP in phosphate buffer (pH 7.0, 0.1 M), the linear range and the detection limit of AFB1 were found to be 5.0 × 10^-3-150.0 ng mL^-1 and 1.0 × 10^-3 ng mL^-1 (S/N = 3), respectively. Finally, the designed aptasensor has been successfully used to measure AFB1 in a rice flour sample with satisfying results. Schematic illustrated the different steps of constructing the electrochemical aptasensor based on Au nanoparticles decorated on Ni-metal-organic framework nanosheets and p-biphenol electroactive label for measuring aflatoxin B1 (AFB1).

A robust colorimetric aptasensor for the label-free detection of marine toxins based on tyrosine-capped gold nanoparticles

Tyrosine-capped AuNPs decrease the interaction between targets and AuNPs, presenting better robustness than traditional Cit-AuNPs. Utilizing the superior features, a label-free aptasensor is developed for marine toxin detection for the first time.

Etching reaction of carbon quantum dot-functionalized MnO2 nanosheets with an enzymatic product for photoelectrochemical immunoassay of alpha-fetoprotein

An etching reaction-based photoelectrochemical (PEC) immunoassay was developed to monitor alpha-fetoprotein (AFP) by coupling with the enzymatic product toward the dissolution of MnO2 nanosheets.

A multifunctional colorimetric sensor array for bacterial identification and real-time bacterial elimination to prevent bacterial contamination

The constructed sensor array has simple operation and successfully integrates bacterial identification and inactivation.

Determination of intracellular ascorbic acid using tandem mass spectrometry

Ascorbic acid is involved in a variety of biological events.

Nanozyme-based sensors for detection of food biomarkers: a review

Nanozymes have piqued the curiosity of scientists in recent years because of their ability to demonstrate enzyme-like activity combined with advantages such as high stability, inexpensive availability, robust activity, and tunable properties. These attributes have allowed the successful application of nanozymes in sensing to detect various chemical and biological target analytes, overcoming the shortcomings of conventional detection techniques. In this review, we discuss recent developments of nanozyme-based sensors to detect biomarkers associated with food quality and safety. First, we present a brief introduction to this topic, followed by discussing the different types of sensors used in food biomarker detection. We then highlight recent studies on nanozyme-based sensors to detect food markers such as toxins, pathogens, antibiotics, growth hormones, metal ions, additives, small molecules, and drug residues. In the subsequent section, we discuss the challenges and possible solutions towards the development of nanozyme-based sensors for application in the food industry. Finally, we conclude the review by discussing future perspectives of this field towards successful detection and monitoring of food analytes.

We present a discussion on different types of sensors used in food biomarker detection and highlight recent studies on nanozyme-based sensors to detect markers like toxins, pathogens, antibiotics, growth hormones, metal ions, additives, small molecules, drug residues.

A direct competitive nanozyme-linked immunosorbent assay based on MnO2 nanosheets as a catalytic label for the determination of fumonisin B1

A direct competitive nanozyme-linked immunosorbent assay (dcNLISA) based on MnO₂ nanosheets (MnO₂ NSs) as a nanozyme label was developed for the highly sensitive determination of fumonisin B₁ (FB₁). MnO₂ NS-labeled fumonisin B₁-bovine serum albumin was easily synthesized as a competing antigen for the dcNLISA. And color changes derived from the MnO₂-3,3',5,5'-tetramethylbenzidine (TMB) system were exploited as the output signals of the dcNLISA. Several experimental parameters including the concentrations of the coating antibody, pH values, ionic strength and methanol concentration were optimized. Under the optimal conditions, the proposed method demonstrated a linear range (1.17-20.74 ng mL^-1) with a reliable correlation coefficient (R² = 0.9989), a satisfactory limit of detection (0.63 ng mL^-1) and high selectivity for the detection of FB₁. The recoveries of FB₁ in spiked corn and wheat samples were in the range of 85.31-108.16% with coefficients of variation (CVs) ranging from 6.14% to 9.23%. Meanwhile, the testing results showed good consistency (R² = 0.9892) between the developed dcNLISA and the reference method, liquid chromatography/mass spectrometry/mass spectrometry (LC-MS/MS) method. The proposed method was proven to be simple, sensitive, cost-effective and reliable for the screening of FB₁ in cereals.

Recent advances in enzyme-enhanced immunosensors

Among the products for rapid detection in different fields, enzyme-based immunosensors have received considerable attention. Recently, great efforts have been devoted to enhancing the output signals of enzymes through different strategies that can significantly improve the sensitivity of enzyme-based immunosensors for the need of practical applications. In this manuscript, the significance of enzyme-based signal transduction patterns in immunoassay and the central role of enzymes in achieving precise control of reaction systems are systematically described. In view of the rapid development of this field, we classify these strategies based on the combination of immune recognition and enzyme amplification into three categories, namely enzyme-based enhancement strategies, combination of the catalytic amplification of enzymes with other signal amplification methods, and substrate-based enhancement strategies. The current focus and future direction of enzyme-based immunoassays are also discussed. This article is not exhaustive, but focuses on the latest advances in different signal generation methods based on enzyme-initiated catalytic reactions and their applications in the detection field, which could provide an accessible introduction of enzyme-based immunosensors for the community with a view to further improving its application efficiency.

Introducing hierarchical hollow MnO2 microspheres as nanozymes for colorimetric determination of captopril

A simple sensor was developed for the colorimetric determination of captopril (CPT). Herein, hierarchical hollow MnO₂ microspheres (HH-MnO₂) were applied as nanozymes with peroxidase-mimetic activity. Free cation radicals with a strong absorption signal (λ_max at 653 nm) were generated via a redox reaction between 3, 3', 5, 5'-tetramethylbenzidine (TMB) and HH-MnO₂. Captopril could successfully prevent the generation of blue-colored free cation radicals. The influence of CPT concentration on the absorption of the generated radicals was monitored by UV-Vis spectroscopy. The corresponding linear concentration range was from 1.0 to 30.0 μg mL^-1 (4.6-138.1 μmol L^-1), and the detection limit was found to be 0.26 μg mL^-1 (1.2 μmol L^-1). As a practical usage, the developed sensor was effectively utilized to measure the content of CPT in pharmaceutical formulations.

LSPR-based colorimetric biosensing for food quality and safety

Ensuring consistently high quality and safety is paramount to food producers and consumers alike. Wet chemistry and microbiological methods provide accurate results, but those methods are not conducive to rapid, onsite testing needs. Hence, many efforts have focused on rapid testing for food quality and safety, including the development of various biosensors. Herein, we focus on a group of biosensors, which provide visually recognizable colorimetric signals within minutes and can be used onsite. Although there are different ways to achieve visual color-change signals, we restrict our focus on sensors that exploit the localized surface plasmon resonance (LSPR) phenomenon of metal nanoparticles, primarily gold and silver nanoparticles. The typical approach in the design of LSPR biosensors is to conjugate biorecognition ligands on the surface of metal nanoparticles and allow the ligands to specifically recognize and bind the target analyte. This ligand-target binding reaction leads to a change in color of the test sample and a concomitant shift in the ultraviolet-visual absorption peak. Various designs applying this and other signal generation schemes are reviewed with an emphasis on those applied for evaluating factors that compromise the quality and safety of food and agricultural products. The LSPR-based colorimetric biosensing platform is a promising technology for enhancing food quality and safety. Aided by the advances in nanotechnology, this sensing technique lends itself easily for further development on field-deployable platforms such as smartphones for onsite and end-user applications.

Applications of scaffold-based advanced materials in biomedical sensing

There have been many efforts to synthesize advanced materials that are capable of real-time specific recognition of a molecular target, and allow the quantification of a variety of biomolecules. Scaffold materials have a porous structure, with a high surface area and their intrinsic nanocavities can accommodate cells and macromolecules. The three-dimensional structure (3D) of scaffolds serves not only as a fibrous structure for cell adhesion and growth in tissue engineering, but can also provide the controlled release of drugs and other molecules for biomedical applications. There has been a limited number of reports on the use of scaffold materials in biomedical sensing applications. This review highlights the potential of scaffold materials in the improvement of sensing platforms and summarizes the progress in the application of novel scaffold-based materials as sensor, and discusses their advantages and limitations. Furthermore, the influence of the scaffold materials on the monitoring of infectious diseases such as severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and bacterial infections, was reviewed.

Integrating multiple hybridization chain reactions on gold nanoparticle and alkaline phosphatase-mediated in situ growth of gold nanobipyramids: An ultrasensitive and high color resolution colorimetric method to detect the mecA gene of Staphylococcus aureus

Colorimetry has been considered as a potential instrument-free platform for point-of-care genomic detection. However, it is limited by the poor sensitivity and low color resolution. Herein, we report a high-resolution colorimetric biosensor based on multiple hybridization chain reactions (HCRs) on gold nanoparticle (AuNP) and alkaline phosphatase (ALP)-mediated in situ growth of gold nanobipyramids (AuNBPs) for ultrasensitive detection of the Staphylococcus aureus (S. aureus) mecA gene. In our design, target DNA is hybridized with capture hairpin DNA on magnetic beads and then amplified by multiple HCRs on AuNP. Since biotin-labeled hairpin-structured nucleic acids are utilized to conduct HCRs, together with the large specific surface area of AuNP, the biotin- and streptavidin- based reaction results in a large amount of ALP on AuNP. With the aid of NADPH, ALP-mediated in situ growth of AuNBPs is observed, and a series of rainbow-like colors are associated with different target DNA concentrations. Through the multiple-amplification strategy produced by AuNP, HCRs, and enzymatic reactions, the target DNA as low as 2.71 pM can be detected with high specificity. Moreover, this method has been successfully applied to detect the mecA gene extracted from S. aureus. Therefore, the proposed method holds great potential in clinical diagnosis.

Dual-mode aptasensor for simultaneous detection of multiple food-borne pathogenic bacteria based on colorimetry and microfluidic chip using stir bar sorptive extraction

A dual-mode aptasensor using colorimetry and microfluidic chip (MC) together with stir bar sorptive extraction (SBSE) has been developed for firstly qualifying samples contaminated with Vibrio parahaemolyticus (V.P) and Salmonella typhimurium (S.T), then precisely determine both of them in positive samples. For this purpose, the aptamer-streptavidin encoded probes (Apt-SAEs) corresponding to different bacteria were prepared in advance. Then, a stir bar modified with 4-mercaptophenylboronic acid (MPBA) was made to extract bacteria together with Apt-SAE probes. The binding event of aptamer and target triggered the formation of two sandwich structures containing Apt-SAE, V.P or S.T. The concentration of bacteria could be enriched by 1000 times within 15 min to avoid long-time enrichment process. Finally, the stir bar was immersed in the 3,3',5,5'-Tetramethylbenzidine (TMB)-H₂O₂ solution for color development. The color could be observed by naked eyes to judge whether the analytes were present. The colorless samples were judged to be negative. For the positive samples, the adsorbed encoded probes corresponding to different bacteria would be eluted from the stir bar and rapidly analyzed by the MC. Under the optimized conditions, 100 CFU/mL of V.P or S.T or both of them could be observed by colorimetry and 35 CFU/mL of them could be detected (S/N = 3) by the MC. The assay has significant application value for on-site screening and multiple detection of food-borne pathogenic bacteria.

Development of a bioavailable Hg(II) sensing system based on MerR-regulated visual pigment biosynthesis

Engineered microorganisms have proven to be a highly effective and robust tool to specifically detect heavy metals in the environment. In this study, a highly specific pigment-based whole-cell biosensor has been investigated for the detection of bioavailable Hg(II) based on an artificial heavy metal resistance operon. The basic working principle of biosensors is based on the violacein biosynthesis under the control of mercury resistance (mer) promoter and mercury resistance regulator (MerR). Engineered biosensor cells have been demonstrated to selectively respond to Hg(II), and the specific response was not influenced by interfering metal ions. The response of violacein could be recognized by the naked eye, and the time required for the maximum response of violacein (5 h) was less than that of enhanced green fluorescence protein (eGFP) (8 h) in the single-signal output constructs. The response of violacein was almost unaffected by the eGFP in a double-promoter controlled dual-signals output construct. However, the response strength of eGFP was significantly decreased in this genetic construct. Exponentially growing violacein-based biosensor detected concentrations as low as 0.39 μM Hg(II) in a colorimetric method, and the linear relationship was observed in the concentration range of 0.78-12.5 μM. Non-growing biosensor cells responded to concentrations as low as 0.006 μM Hg(II) in a colorimetric method and in a Hg(II) containing plate sensitive assay, and the linear relationship was demonstrated in a very narrow concentration range. The developed biosensor was finally validated for the detection of spiked bioavailable Hg(II) in environmental water samples.

Assessment of reliability and validity of the 5-scale grading system of the point-of-care immunoassay for tear matrix metalloproteinase-9

We evaluated the reliability and validity of the 5-scale grading system to interpret the point-of-care immunoassay for tear matrix metalloproteinase (MMP)-9. Six observers graded red bands of photographs of the readout window in MMP-9 immunoassay kit (InflammaDry) two times with 2-week interval based on the 5-scale grading system (i.e. grade 0–4). Interobserver and intraobserver reliability were evaluated using intraclass correlation coefficients. The interobserver agreements were analyzed according to the severity of tear MMP-9 expression. To validate the system, a concentration calibration curve was made using MMP-9 solutions with reference concentrations, then the distribution of MMP-9 concentrations was analyzed according to the 5-scale grading system. Both intraobserver and interobserver reliability was excellent. The readout grades were significantly correlated with the quantified colorimetric densities. The interobserver variance of readout grades had no correlation with the severity of the measured densities. The band density continued to increase up to a maximal concentration (i.e. 5000 ng/mL) according to the calibration curve. The difference of grades reflected the change of MMP-9 concentrations sensitively, especially between grade 2 and 4. Together, our data indicate that the subjective 5-scale grading system in the point-of-care MMP-9 immunoassay is an easy and reliable method with acceptable accuracy.