Naphthalimide derived fluorescent probes with turn-on response for Au3+ and the application for biological visualization

Bright green cellulose-based fluorescent probe toward Au3+ smartphone technology recognition and its visualization application

In this study, a novel fluorescent probe, MAC-2, for the detection of Au3+ was designed and synthesised using cellulose as a carrier combined with benzothiazole derivatives. The structure of the probe was confirmed by SEM, XRD, FTIR, and 1H NMR, also the optical properties of the product were investigated. MAC-2 showed bright green fluorescence under a 365 nm UV lamp and exhibited significant quenching behaviour toward Au3+. MAC-2 utilises more sustainable biomass resources, featuring green and biodegradable characteristics that meet environmental requirements. Compared with most reported probes, it exhibits notable fluorescence properties. The limit of detection (LOD) is as low as 0.057 μM, and the response time is 1 min. It also demonstrates good specific recognition and anti-interference abilities. In addition, a smartphone was used as a portable signal processing device to achieve rapid detection of Au3+ concentration. Meanwhile, MAC-2 was successfully prepared as a fluorescent test strip, providing a potential application for the convenient detection of Au3+. The high sensitivity and selectivity exhibited by cellulose-based fluorescent probes in detecting Au3+ offer valuable insights and new ideas for the detection of other metal ions and biomolecules. These inspirations will help promote the continuous development of research and applications in related fields.

Triazole-linked amidopyrene-tagged fluorometric probe for Au3+ ions and pH control aggregation-induced emission

In this paper, an amidopyrene-tagged reversible fluorescence probe 1 has been constructed for the detection of Au(III) ions in H2O/CH3CN (4/1, v/v). It is used to identify the Au(III) ions over several metal ions with excellent sensitivity (LOD: 0.061 µM). The fluorescence quenching of 1 with Au(III) ions might be attributed to the reverse PET process. Probe 1 recognized Au(III) by forming tetravalent geometry with the amide -NH, triazole moiety, free water, and Cl- ion in 1:1 binding mode, which is evidenced by the DFT calculations, FT-IR spectroscopy, and HRMS value of the complex. The application utility of probe 1 was ascertained from the recovery of Au(III) ions from different sources of natural water samples. Interestingly, molecule 1 also showed aggregation-induced emission behavior at basic pH (>10) in H2O/CH3CN medium with high water content. The AIE might be attributed to the formation of self-associates of 1 upon the intermolecular H-bonding interactions between water and donor atom(s) of 1 or the increased polarity of the solvent medium.

AIEE Active Azomethine-Based Rhodamine Derivative For Ultrasensitive Multichannel Detection of Au3+ Through a Fluorimetrically, Electrochemically, and RGB-Based Sensing Assay

In this study, a novel rhodamine-based optically and electrochemically active chemosensor, integrated with a p-DMAC moiety, demonstrated extremely selective identification of Au³⁺ ions relative to other metal species, including (Li⁺, Na⁺, K⁺, Ba²⁺, Ca²⁺, Mg²⁺, Co²⁺, Mn²⁺, Zn²⁺, Pb²⁺, Ni²⁺, Fe²⁺, Hg²⁺, Fe³⁺, Cd²⁺, Pd²⁺, Al³⁺, Cr³⁺, Cu²⁺, and nitrate salt of Ag⁺). These compounds demonstrated a novel and outstanding aggregation-induced emission enhancement (AIEE) behavior by aggregating in DMF/H₂O medium. Furthermore, the degree of quenching was varying linearly with a Au³⁺ concentration from 0 to 40 nM, with a lower detection limit by RH-DMAC nanoaggregates of 118.79 picomolar (40.35 ppm). The Stern-Volmer plots, Job's plot, Benesi-Hildebrand plot, ¹H NMR titrations, ESI-mass, and FTIR all revealed significant interactions between the sensor and Au³⁺. Moreover, the proposed electrochemical sensor afforded a linear correlation before the peak current and concentration of Au³⁺ in the range of 0-40 nM, with a detection limit of 483.73 pM or 164.36 ppt (by cyclic voltammetry method) and 298.0 pM or 101.24 ppt (by the Differential Pulse Voltammetry method). Furthermore, the proposed sensing assay was used to measure Au³⁺ ion in spiked water samples (tap, drinking, waste, and river water), achieving acceptable accuracy and precision with high recovery rates. Furthermore, RH-DMAC-coated fluorescence paper test strips were designed for on-site Au³⁺ detection. Apart from this, the use of smartphone-based RGB (Red Green Blue) color analysis shortened the operating process, accelerated the detection technique, and provided a novel methodology for the instantaneous, real-time examination of Au³⁺ in real water samples.

Dicoumarin with dimethyl thiocarbamate in the fluorescent detecting for Au3+ in water and cells

Gold ions have high activity and cytotoxicity completely different from elemental gold. It is necessary and critical to develop Au³⁺ detection tools that are easy to operate, intuitive, inexpensive, and non-destructive testing. Here, we propose a novel two-photon fluorescent probe named DA for detecting Au³⁺, which is a rare combination of dicoumarin with dimethylthiocarbamate for the first time. Based on the PET mechanism, DA turns-on the fluorescence to yellow-green after specifically binds to Au³⁺, and the reaction is completed within 5 min. The detection limit is as low as 27.60 nM. Simultaneously, DA achieved qualitative and quantitative detection of Au³⁺ in environmental water samples, and fluorescence imaging of Au³⁺ in biological cells.

CdTe QDs@ZIF-8 composite-based recyclable ratiometric fluorescent sensor for rapid and sensitive detection of chlortetracycline

The residue problem in animal food products caused by the abuse of chlortetracycline (CTC) is one of the food safety issues that have attracted much attention. Herein, a composite was generated by embedding CdTe quantum dots (QDs) into ZIF-8 for ratiometric fluorescent analysis of CTC. With adding CTC, the green luminescence of CTC appeared under the sensitization effect of Zn²⁺ in ZIF-8, but the red luminescence of CdTe QDs was reduced by the inner filtration effect of CTC. On this basis, CTC was detected by the composite with a short response time of 1 min, and the limit of detection was calculated to be 37 nM that was 17 times lower than the maximum residue limit of CTC in animal food products (626 nM). Excellent recyclability of the composite was also observed, and CTC was consecutively measured at least six times. The composite was used to determine CTC in basa fish and pure milk with satisfactory recoveries (91.0-110.0%). Portable test strips were further manufactured and the visual determination of CTC was obtained. These results convictively demonstrate that CdTe QDs@ZIF-8 composite as a recyclable ratiometric fluorescent sensor achieves the rapid and sensitive measurement of CTC residue in animal food products.

In-vitro and in-vivo monitoring of gold(III) ions from intermediate metabolite of sodium aurothiomalate through water-soluble ruthenium (II) complex-based luminescent probe

Real-time monitoring of drug metabolism in vivo is of great significance to drug development and toxicology research. The purpose of this study is to establish a rapid and visual in vivo detection method for the detection of an intermediate metabolite of the gold (I) drug. Gold (I) drugs such as sodium aurothiomalate (AuTM) have anti-inflammatory effects in the treatment of rheumatoid arthritis. Gold(III) ions (Au³⁺) are the intermediate metabolite of gold medicine, and they are also the leading factor of side effects in the treatment of patients. However, the rapid reduction of Au³⁺ to Au⁺ by thiol proteins in organisms limits the in-depth study of metabolism of gold drugs in vivo. Here we describe a luminescence Au³⁺ probe (RA) based on ruthenium (II) complex for detecting Au³⁺ in vitro and in vivo. RA with large Stokes shift, good water solubility and biocompatibility was successfully applied to detect Au³⁺ in living cells and vivo by luminescence imaging, and to trap the fluctuation of Au³⁺ level produced by gold (I) medicine. More importantly, the luminescent probe was used to the detection of the intermediate metabolites of gold (I) drugs for the first time. Overall, this work offers a new detection tool/method for a deeper study of gold (I) drugs metabolite.

The development of a biotin-guided and mitochondria-targeting fluorescent probe for detecting SO2 precisely in cancer cells

Mitochondrial sulfur dioxide (SO₂) is very closely associated with various activities of cancer cell. However, the specific physiological and pathological roles of mitochondrial SO₂ in cancer cells are still not well defined. Lacking a powerful molecular tool for detecting mitochondrial SO₂ in cancer cells precisely is an essential factor. So it is urgent to develop a specific method for monitoring mitochondrial SO₂ in cancer cells. Herein, we described a distinct cancer cell-specific fluorescent probe NS for detecting mitochondrial SO₂ accurately in cancer cells. Biotin, possessing of high affinity for cancer cells, was decorated into probe to provide its cancer cell-targeting property. Moreover, the positive charge hemicyanine group was used to anchor mitochondria selectively. A series of spectral results from concentration titration, dynamics and selectivity experiments showed that NS had high sensitivity, fast response and high selectivity to SO₂. These properties render NS ability for detecting SO₂ in living cells. In biological imaging, the achievements in detecting exogenous and endogenous SO₂ displayed the probe had favorable response to SO₂ in living cells with well biocompatibility. Significantly, assisted by competitive experiments with excess biotin, NS demonstrated distinct cancer cell-targeting for detecting mitochondrial SO₂. Furthermore, NS could locate mitochondria specially and detect mitochondrial SO₂ in cancer cells by co-localization. Moreover, NS can trace SO₂ in zebrafish with long wavelength emission. Therefore, NS can achieve in tracing mitochondrial SO₂ selectively in cancer cells. It would be a powerful tool for well defining the physiological and pathological roles of mitochondrial SO₂ in cancer cells.

Ribosomal RNA-Selective Light-Up Fluorescent Probe for Rapidly Imaging the Nucleolus in Live Cells

RNA-based fluorescent probes are currently limited by their low selectivity toward RNA versus DNA, and low specificity to different RNA structures. Poor membrane permeability is another defect of existing fluorogenic RNA probes for intracellular imaging. In this work, a naphthalimide derivative, probe 1, was developed for the rapid and selective detection of intracellular rRNA (rRNA). Probe 1 exhibited a 32-fold fluorescent enhancement in response to rRNA binding and showed desirable selectivity for rRNA versus DNA and other nucleic acids in phosphate buffer at pH 7.2. Importantly, probe 1 displayed excellent permeability of the nucleolus, could be taken up in 1 min by four different cell lines, and may be the fastest nucleolus dye. The excellent selectivity of probe 1 toward rRNA is attributed to the specific interaction between the complicated 3D structures of rRNA, which was confirmed by quantum calculations using molecular docking simulations. An appropriate lipophilic balance in 1 with the hydrophilic amine group and hydrophobic naphthalimide, as well as its high water solubility, guarantees the high permeability of 1 in cell membranes and nucleolus pores, compared to other analogues (e.g., probes 2-8 in this work). Furthermore, enlarged confocal laser micro images of nucleoli and RNase digestion tests revealed that 1 remained highly selective toward rRNA, even for intracellular imaging. As a live cell probe, 1 also exhibited better photostability than the commercial RNA dye, SYTO RNA select.

Monitoring of Au(iii) species in plants using a selective fluorescent probe

A colorimetric and ratiometric probe with a push–pull chromophore dicyanoisophorone system, AuP, has been developed for the detection of Au(iii) species with highly sensitive and selective response to real-water samples and living tissues of Arabidopsis thaliana.

Design of a two-photon fluorescent probe for selective recognition of Au(III) over Au(I) and its application of imaging in vitro and in vivo

A highly selective two-photon fluorescent probe (PyCM-1) for Au³⁺ was developed with distinct "turn on" fluorescence response, low detection limit (22nM) and large two-photon absorption cross-sections (696 GM at 860nm). Its high selectivity for Au³⁺ over Au⁺ was achieved via the modification on the type of coordination atoms in the Schiff base receptor. Co-staining experiments showed that the probe PyCM-1 could co-localize specifically with mitochondria. Moreover, the two-photon confocal fluorescence imaging results demonstrated the probe's capability for visualizing Au³⁺in vitro and in vivo.

A New Reactive 1,8-Naphthalimide Derivative for Highly Selective and Sensitive Detection of Hg2

A 1,8-naphthalimide derivative with a reactive aliphatic hydroxyl was designed and synthesized as a fluorescent probe. Its structure was characterized by IR, ¹H NMR, ¹³C NMR, LC-MS and HPLC. The probe showed high selectivity and sensitivity to Hg²⁺ over other metal ions such as Pb²⁺, Na⁺, K⁺, Cd²⁺, Cr³⁺, Zn²⁺, Cu²⁺, Ni²⁺, Ca²⁺, Fe³⁺, Fe²⁺, Co²⁺, Mn²⁺ and Mg²⁺ in MeCN/H₂O (15/85, v/v). The increase in fluorescence intensity was linearly proportional to the concentration of Hg²⁺ in the range of 18-40 μM with a detection limit of 1.38 × 10^-7 mol/L. The probe could work in a pH span of 4.3-9.0 and respond to Hg²⁺ quickly with strong anti-interference ability. Job's plot suggested a 1:2 complex of the probe and Hg²⁺.

High-throughput and ultratrace naked-eye colorimetric detection of Au3+ based on the gold amalgam-stimulated peroxidase mimetic activity in aqueous solutions

Herein, we present a catalysis-based, label-free, and efficient strategy for a rapid, high-throughput, highly selective and ultrasensitive naked-eye colorimetric assay of Au³⁺ in aqueous solutions, based on the gold amalgam-stimulated peroxidase mimetic activity.

Glycosidase activated release of fluorescent 1,8-naphthalimide probes for tumor cell imaging from glycosylated 'pro-probes'

Glycosylated 4-amino-1,8-naphthalimide derivatives possess a native glycosidic linkage that can be selectively hydrolysed in situ by glycosidase enzymes to release the naphthalimide as a fluorescent imaging or therapeutic agent. In vitro studies using a variety of cancer cell lines demonstrated that the naphthalimides only get taken up into cells upon enzymatic cleavage from the glycan unit; a mechanism that offers a novel approach for the targeted delivery of probes/drugs.