Dual-responsive immunosensor that combines colorimetric recognition and electrochemical response for ultrasensitive detection of cancer biomarkers

Multimodal biosensing systems based on metal nanoparticles

Biosensors are currently among the most commonly used devices for analysing biomarkers and play an important role in environmental detection, food safety, and disease diagnosis. Researchers have developed multimodal biosensors instead of single-modal biosensors to meet increasing sensitivity, accuracy, and stability requirements. Metal nanoparticles (MNPs) are beneficial for preparing core probes for multimodal biosensors because of their excellent physical and chemical properties, such as easy regulation and modification, and because they can integrate diverse sensing strategies. This review mainly summarizes the excellent physicochemical properties of MNPs applied as biosensing probes and the principles of commonly used MNP-based multimodal sensing strategies. Recent applications and possible improvements of multimodal biosensors based on MNPs are also described, among which on-site inspection and sensitive detection are particularly important. The current challenges and prospects for multimodal biosensors based on MNPs may provide readers with a new perspective on this field.

Establishment of a multi-line immunochromatography based on magnetic nanoparticles for simultaneous screening of multiple biomarkers

Biomarkers screening is a benefit approach for early diagnosis of major diseases. In this study, magnetic nanoparticles (MNPs) have been utilized as labels to establish a multi-line immunochromatography (MNP-MLIC) for simultaneous detection of carcinoembryonic antigen (CEA), carbohydrate antigen 199 (CA 19-9), and alpha-fetoprotein (AFP) in a single serum sample. Under the optimal parameters, the three biomarkers can be rapidly and simultaneously qualitative screening within 15 min by naked eye. As for quantitative detection, the MNP-MLIC test strips were precisely positioned and captured by a smartphone, and signals on the test and control lines were extracted by ImageJ software. The signal ratio of test and control lines has been calculated and used to plot quantitative standard curves with the logarithmic concentration, of which the correlation coefficients are more than 0.99, and the limit of detection for CEA, CA 19-9, and AFP were 0.60 ng/mL, 1.21 U/mL, and 0.93 ng/mL, respectively. The recoveries of blank serum were 75.0 ~ 112.5% with the relative standard deviation ranging from 2.5 to 15.3%, and the specificity investigation demonstrated that the MNP-MLIC is highly specific to the three biomarkers. In conclusion, the developed MNP-MLIC offers a rapid, simple, accurate, and highly specific method for simultaneously detecting multiple biomarkers in serum samples, which provides an efficient and accurate approach for the early diagnosis of diseases.

Bimetallic Coordination Polymers: Synthesis and Applications in Biosensing and Biomedicine

Bimetallic coordination polymers (CPs) have two different metal ions as connecting nodes in their polymer structure. The synthesis methods of bimetallic CPs are mainly categorized into the one-pot method and post-synthesis modifications according to various needs. Compared with monometallic CPs, bimetallic CPs have synergistic effects and excellent properties, such as higher gas adsorption rate, more efficient catalytic properties, stronger luminescent properties, and more stable loading platforms, which have been widely applied in the fields of gas adsorption, catalysis, energy storage as well as conversion, and biosensing. In recent years, the study of bimetallic CPs synergized with cancer drugs and functional nanomaterials for the therapy of cancer has increasingly attracted the attention of scientists. This review presents the research progress of bimetallic CPs in biosensing and biomedicine in the last five years and provides a perspective for their future development.

Carbon Nanotube Field-Effect Transistor Biosensor with an Enlarged Gate Area for Ultra-Sensitive Detection of a Lung Cancer Biomarker

Carcinoembryonic antigen (CEA) is a recognized biomarker for lung cancer and can be used for early detection. However, the clinical value of CEA is not fully realized due to the rigorous requirement for high-sensitivity and wide-range detection methods. Field-effect transistor (FET) biosensors, as one of the potentially powerful platforms, may detect CEA with a significantly higher sensitivity than conventional clinical testing equipment, while their sensitivity and detection range for CEA are far below the requirement for early detection. Here, we construct a floating gate FET biosensor to detect CEA based on a semiconducting carbon nanotube (CNT) film combined with an undulating yttrium oxide (Y₂O₃) dielectric layer as the biosensing interface. Utilizing an undulating biosensing interface, the proposed device showed a wider detection range and optimized sensitivity and detection limit, which benefited from an increase of probe-binding sites on the sensing interface and an increase of electric double-layer capacitance, respectively. The outcomes of analytical studies confirm that the undulating Y₂O₃ provided the desired biosensing surface for probe immobilization and performance optimization of a CNT-FET biosensor toward CEA including a wide detection range from 1 fg/mL to 1 ng/mL, good linearity, and high sensitivity of 72 ag/mL. More crucially, the sensing platform can function normally in the complicated environment of fetal bovine serum, indicating its great promise for early lung cancer screening.

Current Update on Biomarkers for Detection of Cancer: Comprehensive Analysis

Early and effective diagnosis of cancer is decisive for its proper management. In this context biomarker-based cancer diagnosis is budding as one of the promising ways for early detection, disease progression monitoring, and effective cancer therapy. Integration of Biosensing devices with different metallic/nonmetallic nanoparticles offers amplification and multiplexing capabilities for simultaneous detection of cancer biomarkers (CB's). This study provides a comprehensive analysis of the most recent designs and fabrication methodologies designed for developing electrochemical biosensors (EB) for early detection of cancers. The role of biomarkers in cancer therapeutics is also discussed.

Impedimetric aptasensor based on zirconium-cobalt metal-organic framework for detection of carcinoembryonic antigen

A zirconium-cobalt metal-organic framework (ZrCo-MOF) was prepared and used as sensing material to fabricate an aptasensor for trace detection of carcinoembryonic antigen (CEA). The ZrCo-MOF integrates the 3D porous structure and abundant defects of the MOF framework, the catalytic activity and inherent redox behavior of Co, and high stability of Zr-MOF, providing abundant active sites to effectively anchor aptamers. As a result, the ZrCo-MOF-based aptasensor shows high sensitivity to detect CEA via specific recognition between aptamer and CEA, as well as the formation of aptamer-CEA complex. A detection limit of 0.35 fg·mL^-1 was deduced from the electrochemical impedance spectroscopy within a wide linear range of 0.001-100 pg·mL^-1 for CEA, which was substantially lower than those of most reported CEA biosensors. The ZrCo-MOF-based aptasensor also shows good selectivity, reproducibility, regenerability, stability, and applicability for human serum sample. Therefore, the developed ZrCo-MOF-based aptasensor will be promising for ultrasensitive detection of biomarkers and the early diagnosis of cancer. This work presents a novel electrochemical aptasensor for the trace detection of carcinoembryonic antigen (CEA) based on a zirconium-cobalt metal-organic framework (ZrCo-MOF), which shows low detection limit of 0.35 fg·mL^-1, high selectivity as well as good reproducibility, regenerability, stability, and applicability. The result provides a promising approach to detect the cancer biomarkers in an early age.

State of the Art in Smart Portable, Wearable, Ingestible and Implantable Devices for Health Status Monitoring and Disease Management

Several illnesses that are chronic and acute are becoming more relevant as the world's aging population expands, and the medical sector is transforming rapidly, as a consequence of which the need for "point-of-care" (POC), identification/detection, and real time management of health issues that have been required for a long time are increasing. Biomarkers are biological markers that help to detect status of health or disease. Biosensors' applications are for screening for early detection, chronic disease treatment, health management, and well-being surveillance. Smart devices that allow continual monitoring of vital biomarkers for physiological health monitoring, medical diagnosis, and assessment are becoming increasingly widespread in a variety of applications, ranging from biomedical to healthcare systems of surveillance and monitoring. The term "smart" is used due to the ability of these devices to extract data with intelligence and in real time. Wearable, implantable, ingestible, and portable devices can all be considered smart devices; this is due to their ability of smart interpretation of data, through their smart sensors or biosensors and indicators. Wearable and portable devices have progressed more and more in the shape of various accessories, integrated clothes, and body attachments and inserts. Moreover, implantable and ingestible devices allow for the medical diagnosis and treatment of patients using tiny sensors and biomedical gadgets or devices have become available, thus increasing the quality and efficacy of medical treatments by a significant margin. This article summarizes the state of the art in portable, wearable, ingestible, and implantable devices for health status monitoring and disease management and their possible applications. It also identifies some new technologies that have the potential to contribute to the development of personalized care. Further, these devices are non-invasive in nature, providing information with accuracy and in given time, thus making these devices important for the future use of humanity.

A colorimetric sensor for acid phosphatase activity detection based on acridone derivative as visible-light-stimulated oxidase mimic

Currently, organic artificial enzymes as biocatalysts have been extensively used to construct various colorimetric sensors. However, exploiting a potential organic artificial enzyme with high catalytic efficiency still remains a challenge. To address this issue, herein, we synthesize an acridone derivative 10-benzyl-2-amino-acridone (BAA). The synthesized BAA exhibits an intrinsic visible-light-stimulated oxidase-like activity, which is capable of oxidizing various chromogenic substrates without destructive hydrogen peroxide (H₂O₂) under visible light stimulation, resulting in colored products. The reaction system can be regulated by switching light on and off, which is milder and more reliable means than others H₂O₂-dependent. The photocatalytic mechanism of BAA is investigated in detail. However, l-ascorbic acid (AA), an antioxidant generating from the acid phosphatase (ACP)-mediated hydrolysis of 2-phospho-l-ascorbic acid (AAP), is able to inhibit the catalytic activity of BAA. Based on the above properties, a facile, photo-switchable and low-cost colorimetric sensing strategy is developed for ACP detection. The linear range is 0.05-2.5 U/L (r = 0.9994), and the limit of detection (LOD) is 0.0415 U/L. Moreover, the proposed sensing system can be applied for monitoring ACP activity in practical samples, demonstrating promising applications in clinical analysis and biosensor platform.

Electrochemical prostate-specific antigen biosensors based on electroconductive nanomaterials and polymers

Prostate cancer (PCa), the second most malignant neoplasm in men, is also the fifth leading cause of cancer-related deaths in men globally. Unfortunately, this malignancy remains largely asymptomatic until late-stage emergence when treatment is limited due to the lack of effective metastatic PCa therapeutics. Due to these limitations, early PCa detection through prostate-specific antigen (PSA) screening has become increasingly important, resulting in a more than 50% decrease in mortality. Conventional assays for PSA detection, such as enzyme-linked immunosorbent assay (ELISA), are labor intensive, relatively expensive, operator-dependent and do not provide adequate sensitivity. Electrochemical biosensors overcome these limitations because they are rapid, cost-effective, simple to use and ultrasensitive. This article reviews electrochemical PSA biosensors using electroconductive nanomaterials such as carbon-, metal-, metal oxide- and peptide-based nanostructures, as well as polymers to significantly improve conductivity and enhance sensitivity. Challenges associated with the development of these devices are discussed thus providing additional insight into their analytic strength as well as their potential use in early PCa detection.

Recent advances in nanomaterials for colorimetric cancer detection

The early diagnosis of cancer can significantly improve patient survival rates. Colorimetric methods for real-time naked-eye detection have aroused growing interest owing to their low cost, simplicity, and practicability. With the rapid development of nanotechnology, compared with conventional diagnostic methods, nanomaterials with unique physical and chemical properties were applied to improve selectivity and sensitivity in colorimetric detection of cancer biomarkers, such as MUC1 aptamer conjugated PtAuNPs to specifically recognize MUC1 proteins on the cancer cell surfaces, etching of silver nanoprisms to detect prostate-specific antigen, and aggregation or dispersion of AuNPs to sense prostate cancer antigen gene 3 or glutathione, by which the limit of detection (LOD) could approach values down to a few cancer cells per mL, several fg per mL proteins, several ng of nucleic acids, or even tens of nM of organic molecules. Herein, we review the recent progress achieved in developing colorimetric nanosensors for cancer diagnosis, particularly providing an overview of the sensing principles, target biomarkers, advanced nanomaterials employed in the fabrication of sensing platforms, and strategies for improving signal sensitivity and specificity. Finally, we sum up the nanomaterial-based colorimetric cancer detection as well as existing challenges that should be resolved to extend their clinical application.

Gold-silver alloy film based surface plasmon resonance sensor for biomarker detection

In this study, we developed a gold‑silver alloy film based surface plasmon resonance (AuAg-SPR) sensor with wavelength interrogation to detect cancer antigen 125 (CA125) using a sandwich immunoassay. We first theoretically simulated the sensitivity of conventional gold film based SPR (Au-SPR) sensor and AuAg-SPR sensor, and conducted a series of experiments to investigate the sensitive characteristics of AuAg-SPR sensor, including the angle and refractive index (RI) sensitivity. We then conducted CA125 detection experiments on these two types of sensors. The results demonstrated that the limit of detection (LOD) of CA125 on the AuAg-SPR sensor was 0.1 U/mL (0.8 ng/mL) based on its direct reaction with an immobilised antibody, which was two orders of magnitude lower than that of the Au-SPR sensor (10 U/mL). The total changes in the resonance wavelength (∆λ_R) of the former were 1.7-fold those of the latter. The volume fractions of the adsorbates (f_ad) and effective RIs (n_adlayer) in each adlayer were then calculated and the effect of the antibody size on the detection results was analysed. The AuAg-SPR sensors had a higher sensitivity than the conventional Au-SPR sensors for detecting CA125 due to their electric field characteristics. Therefore, these will have better application prospects.

Salt-induced gold nanoparticles aggregation lights up fluorescence of DNA-silver nanoclusters to monitor dual cancer markers carcinoembryonic antigen and carbohydrate antigen 125

In clinical diagnosis of cancer, the monitoring of single tumor marker may result in many false and missed results, while simultaneous detection of multiple tumor markers should be more accuracy and effective. Here, we report a new strategy that salt-induced gold nanoparticles (AuNPs) aggregation lights up fluorescence of dual-color DNA-silver nanoclusters-aptamer (DNA-AgNCs-apta) for the simultaneous monitoring of carcinoembryonic antigen (CEA) and carbohydrate antigen 125 (CA125). The dual-color aptasensor system is composed of green-emitting DNA-AgNCs with CEA aptamer (gDNA₁-AgNCs-apta₁) and red-emitting DNA-AgNCs with CA125 aptamer (rDNA₂-AgNCs-apta₂) in the ratio of 1:1 in volume. Upon addition of AuNPs, gDNA₁-AgNCs-apta₁ and/or rDNA₂-AgNCs-apta₂ are flexibly adsorbed onto the surface of AuNPs by terminal aptamer(s), which prevents salt-induced AuNPs aggregation under high salt condition and results in fluorescence quenching based on surface plasmon enhanced energy transfer (SPEET). With the addition of CEA and/or CA125, the target(s) and corresponding aptamer(s) coordinate to form the complex, keeping DNA-AgNCs-apta(s) far away from the surface of AuNPs and making AuNPs aggregated in high salt medium. The AuNPs aggregation leads to the recovery of fluorescence signals of DNA-AgNCs-apta(s) due to weakened SPEET. Utilizing the fluorescence aptasensor system, the limit of detection of CEA and CA125 are as low as 7.5 pg·mL^-1 and 0.015 U·mL^-1, respectively. The proposed method can be applied to the selective and simultaneous determination of CEA and CA125 in human serum.

Self-Assembled Human Adipose-Derived Stem Cell-Derived Extracellular Vesicle-Functionalized Biotin-Doped Polypyrrole Titanium with Long-Term Stability and Potential Osteoinductive Ability

Mesenchymal stem cell-derived extracellular vesicles (MSC-EVs), containing proteins or microRNAs (miRNAs), possessing various biological activity and low immunogenicity, are considered promising for surface modification of bone grafts. However, the modification efficiency is not satisfied yet, resulting in compromised therapy effects. Here, we report a novel immobilized method by self-assembling biotinylated MSC-EVs onto the surface of biotin-doped polypyrrole titanium (Bio-Ppy-Ti) to improve its biofunctions in vitro and in vivo. Using this method, the amount of human adipose-derived stem cell-EVs (hASC-EVs) anchored onto the Bio-Ppy-Ti surface was 185-fold higher than that of pure Ti after ultrasonic concussion for 30 s and it remained stable on the Bio-Ppy-Ti surface for 14 days at 4 °C. Compared to pristine Ti, EV-Bio-Ppy-Ti exhibited enhanced cell compatibility and osteoinductivity for osteoblasts in vitro and anti-apoptosis ability in the ectopic bone formation mode. Gene chip analysis further demonstrated that several osteoinductive miRNAs were encapsulated in hASC-EVs, which may explain the high bone regeneration ability of EV-Bio-Ppy-Ti. Thus, this MSC-EV biotin-immobilized method appears to be highly efficient and long-term stable for bone graft bioactive modification, demonstrating its potential for clinical metal implants.

Colorimetric immunosensor for determination of prostate specific antigen using surface plasmon resonance band of colloidal triangular shape gold nanoparticles

In this work, we demonstrated the development of a colorimetric immunosensor using surface plasmon resonance band of gold nanoparticles for the detection of prostate specific antigen (PSA). To develop this biosensing tool, triangular gold nanoparticles (AuNPs) were synthesized using Tween-20 as a nonionic surfactant and then, conjugated with PSA capture antibody (Ab₁-AuNPs). When exposed to Ab₁-AuNPs, PSA antigens were found to be successfully captured by nanosystem (PSA)-Ab₁-AuNPs. Next, (PSA)-Ab₁-AuNPs were incubated with second PSA antibody (2)-decorated magnetite (Fe₃O₄-Ab₂) and separated by an external magnetic force to leave Ab₁-AuNPs in the supernatant solution to be directly analyzed using UV-Vis spectroscopy. It was found that the absorption intensity was directly proportional to the PSA concentration. As a result, the linear range for PSA detection was found to be 0.01-20 ng mL^-1 with a detection limit of 0.009 ng mL^-1. Because of significant stability of the prepared Ab₁-AuNPs and excellent selectivity to the PSA antigen, this simple and sensitive sensing system is proposed to be potentially effective in the fast and real-time analysis of clinical samples from prostate cancer patients. We believe that the simple platform of this immunosensor to be useful in the development of future point-of-care sensing tools, working on the quantification of biomarkers in a drop of blood.

Implication of Magnetic Nanoparticles in Cancer Detection, Screening and Treatment

During the last few decades, magnetic nanoparticles have been evaluated as promising materials in the field of cancer detection, screening, and treatment. Early diagnosis and screening of cancer may be achieved using magnetic nanoparticles either within the magnetic resonance imaging technique and/or sensing systems. These sensors are designed to selectively detect specific biomarkers, compounds that can be related to the onset or evolution of cancer, during and after the treatment of this widespread disease. Some of the particular properties of magnetic nanoparticles are extensively exploited in cancer therapy as drug delivery agents to selectively target the envisaged location by tailored in vivo manipulation using an external magnetic field. Furthermore, individualized treatment with antineoplastic drugs may be combined with magnetic resonance imaging to achieve an efficient therapy. This review summarizes the studies about the implications of magnetic nanoparticles in cancer diagnosis, treatment and drug delivery as well as prospects for future development and challenges of magnetic nanoparticles in the field of oncology.

A multiple aptasensor for ultrasensitive detection of miRNAs by using covalent-organic framework nanowire as platform and shell-encoded gold nanoparticles as signal labels

We report herein a novel multiple electrochemical aptasensor based on covalent-organic framework (COF) for sensitive and simultaneous detection of miRNA 155 and miRNA 122, by using shell-encoded gold nanoparticles (Au NPs) as signal labels (AgNCs@AuNPs and Cu₂O@AuNPs, respectively, NCs = nanoclusters). A new COF nanowire was synthesized via condensation polymerization of 1,3,6,8-tetra(4-carboxylphenyl)pyrene and melamine (represented by TBAPy-MA-COF-COOH) for multiple aptasensor fabrication. The nanowire was then used as a platform for anchoring single-strand DNA (ssDNA), which was hybridized with the complementary aptamer (cApt) probes of miRNA 155 and miRNA 122. AgNCs@AuNPs and Cu₂O@AuNPs modified with cApts show separated differential pulse voltammetry (DPV) peaks at 0.08 and -0.1 V, respectively. The signal labels immobilized with cApts were released from the hybridized DNA complex and bound to their corresponding targets when contacting miRNAs. This phenomenon results in the substantial decline of the DPV peak current density of the signal labels. The developed TBAPy-MA-COF-COOH-based aptasensor has superior performance for sensing miRNA 155 and miRNA 122 simultaneously, with ultrasensitive low detection limits of 6.7 and 1.5 fM (S/N = 3), respectively, a wide linear range of 0.01-1000 pM, and high selectivity and applicability for serum samples. The proposed TBAPy-MA-based aptasensor demonstrates potential for simultaneous detection of multiple cancer biomarkers by replacing other ssDNA and aptamer strands.

Molecularly imprinted polymer SPE sensor for analysis of CA-125 on serum

Considering the high incidence level and mortality rate of ovarian cancer, particularly among the European female population, the carbohydrate antigen 125 (CA-125) was selected as the protein target for this study for the development of a MIP-based biosensor. This work presents the development of molecular imprinting polymers (MIPs) on gold electrode surface for CA-125 biomarker recognition. The preparation of the CA-125 imprinting was obtained by electropolymerization of pyrrole (Py) monomer in a gold electrode using cyclic voltammetry (CV) in order to obtain highly selective materials with great molecular recognition capability. The quantification of CA-125 biomarker was made through the comparison of two methods: electrochemical (square wave voltammetry -SWV) and optical transduction (surface plasmon resonance -SPR). SWV has been widely used in biological molecules analysis since it is a fast and sensitive technique. In turn, SPR is a non-destructive optical technique that provides high-quality analytical data of CA-125 biomarker interactions with MIP. Several analytical parameters, such as sensitivity, linear response interval, and detection limit were determined to proceed to the performance evaluation of the electrochemical and optical transduction used in the development of the CA-125 biosensor. The biosensor based in the electrochemical transduction was the one that presented the best analytical parameters, yielding a good selectivity and a detection limit (LOD) of 0.01 U/mL, providing a linear concentration range between 0.01 and 500 U/mL. This electrochemical biosensor was selected for the study and it was successfully applied in the CA-125 analysis in artificial serum samples with recovery rates ranging from 91 to 105% with an average relative error of 5.8%.

Advances in electrochemical immunosensors

Immunosensors are compact tools on which antibody and antigen interactions are formed. The specific interaction between antibody and antigen is detected by using a transducer and an electrical signal is measured. This specific interaction between these molecules makes immunosensor very attractive for several applications in different fields. Electrochemical immunosensors are successful devices in selective and sensitive detection of several analytes. Electrochemical transducing methods such as voltammetric, potentiometric, conductometric or impedimetric have been utilized in different applications due to their excellent properties such as being low-cost, sensitivity and simplicity. In this chapter, the fundamentals of electrochemical immunosensors are summarized and different applications in food, environmental and clinical analyses are investigated and discussed.

Au@Pt nanodendrites enhanced multimodal enzyme-linked immunosorbent assay

Single modal enzyme-linked immunosorbent assay (ELISA) covering colorimetric, fluorescence, and chemiluminescence techniques has been widely reported in recent years, whereas the combination of multiple signal channels in one immunosensing platform still faces huge challenges. Multimodal imaging will provide more comprehensive and precise diagnostic information by the combination of two or more imaging modalities. Inspired by this concept, we established a new kind of multimodal enzyme-linked immunosorbent assay (M-ELISA) based on the unique properties of Au@Pt nanodendrites. As a proof-of-concept demonstration, cardiac troponin I (cTnI) has been chosen as a model biomarker. Owing to the excellent photothermal effect and intrinsic peroxidase-like activity of Au@Pt nanodendrites, the concentration of cTnI can be quantificationally reflected by photothermal immunoassay, colorimetric immunoassay and ratiometric fluorescence immunoassay simultaneously. This developed M-ELISA demonstrated the good consistency with the chemiluminescence immunoassay method in clinical diagnosis for real serum samples.

Fluorometric nanoprobes for simultaneous aptamer-based detection of carcinoembryonic antigen and prostate specific antigen

A "turn-on" fluorometric assay based on the combined effects of fluorescence resonance energy transfer (FRET) and internal filter effect (IFE) is described for the rapid and ultrasensitive detection of both carcinoembryonic antigen (CEA) and prostate specific antigen (PSA). Their unique porous structures and high specific surface enable mesoporous silica nanoparticles (MSNs) to load a large number of CdTe quantum dots (QDs). These amplify the fluorescence signal and provide a platform to fabricate more distinctly fluorescent MSNs (QD-MSNs). Two kinds of QD-MSNs with the maximum emission wavelengths at 590 nm (orange) and 731 nm (dark red) were fabricated and served as two types of fluorescent probes for the dual detection. Two aptamers were covalently connected to fluorescent MSNs as the recognition unit to warrant the selectivity of assay. The fluorescence of QD-MSNs can be quenched by molybdenum disulfide nanosheets (MoS₂) due to FRET mechanism, IFE also contributed to the the reduction of fluorescence intensity. The fluorescence of QD-MSNs was further recovered in the presence of CEA and PSA attributing to the excellent specificity of aptamers. A "turn-on" fluorescent two-channel nanoprobe is introduced for simultaneous quantification of CEA and PSA. The respective limits of detection (at S/N = 3) are 0.7 fg•mL^-1 for CEA and 0.9 fg•mL^-1 for PSA. Graphical abstract Schematic presentation of the turn-on fluorescent nanoprobes for simultaneous detection of CEA and PSA.

Direct isolation and characterization of circulating exosomes from biological samples using magnetic nanowires

BACKGROUND

Tumor-derived exosomes are gaining attention as important factors that facilitate communication between neighboring cells and manipulate cellular processes associated with cancer development or progression. The conventional techniques for the isolation and detection of exosomes face several limitations, restricting their clinical applications. Hence, a highly efficient technique for the isolation and identification of exosomes from biological samples may provide critical information about exosomes as biomarkers and improve our understanding of their unique role in cancer research. Here, we describe the use of antibody cocktail-conjugated magnetic nanowires to isolate exosomes from plasma of breast and lung cancer patients.

METHODS

The isolated exosomes were characterized based on size and concentration using nanoparticle tracking analysis. Levels of exosomal proteins were measured by bicinchoninic acid assay and enzyme-linked immunosorbent assay. Morphology was visualized by transmission electron microscopy. Immunoblotting (Western blotting) was used to detect the presence of exosomal markers.

RESULTS

The use of antibody cocktail-conjugated magnetic nanowires resulted in approximately threefold greater yield when compared to the conventional methods. The elongated feature of nanowires significantly improved the efficiency of exosome isolation, suggesting its potential to be translated in diverse clinical applications, including cancer diagnosis and treatment.

CONCLUSIONS

The nanowire-based method allows rapid isolation of homogeneous population of exosomes with relatively high yield and purity from even small amounts of sample. These results suggest that this method has the potential for clinical applications requiring highly purified exosomes for the analysis of protein, lipid, mRNA, and miRNA.

Combined electrochemiluminescent and electrochemical immunoassay for interleukin 6 based on the use of TiO2 mesocrystal nanoarchitectures

A dual-responsive sandwich-type immunosensor is described for the detection of interleukin 6 (IL-6) by combining electrochemiluminescent (ECL) and electrochemical (EC) detection based on the use of two kinds of TiO₂ mesocrystal nanoarchitectures. A composite was prepared from TiO₂ (anatase) mesocages (AMCs) and a carboxy-terminated ionic liquid (CTIL) and then placed on a glassy carbon electrode (GCE). In the next step, the ECL probe Ru(bpy)₃(II) and antibody against IL-6 (Ab₁) were immobilized on the GCE. Octahedral anatase TiO₂ mesocrystals (OAMs) served as the matrix for immobilizing acid phosphatase (ACP) and secondary antibody (Ab₂) labeled with horseradish peroxidase (HRP) to form a bioconjugate of type Ab₂-HRP/ACP/OAMs. It was self-assembled on the GCE by immunobinding. 1-Naphthol, which is produced in-situ on the surface of the GCE due to the hydrolysis of added 1-naphthyl phosphate by ACP, is oxidized by HRP in the presence of added H₂O₂. This results in an electrochemical signal (typically measured at 0.4 V vs. Ag/AgCl) that increases linearly in the 10 fg·mL^-1 to 90 ng·mL^-1 IL-6 concentration range with a detection limit of 0.32 fg·mL^-1. Secondly, the oxidation product of 1-naphthol quenches the ECL emission of Ru(bpy)₃²⁺. This leads to a decrease in ECL intensity which is linear in the 10 ag·mL^-1 to 90 ng·mL^-1 concentration range, with a detection limit of 3.5 ag·mL^-1. The method exhibits satisfying selectivity and good reproducibility which demonstrates its potential in clinical testing and diagnosis. Graphical abstract A dual-responsive sandwich-type immunosensor was fabricated for the detection of interleukin 6 by combining electrochemiluminescence and electrochemical detection based on the use of two kinds of TiO₂ mesocrystal nanoarchitectures.

Erythrocyte–platelet hybrid membranes coating polypyrrol nanoparticles for enhanced delivery and photothermal therapy

A dual-membrane coating technique was developed to camouflage polypyrrole nanoparticles with red blood cells and platelet membranes for enhanced delivery and photothermal tumor therapy.

Nanomaterial-based biosensors for detection of prostate specific antigen

Screening serum for the presence of prostate specific antigen (PSA) belongs to the most common approach for the detection of prostate cancer. This review (with 156 refs.) addresses recent developments in PSA detection based on the use of various kinds of nanomaterials. It starts with an introduction into the field, the significance of testing for PSA, and on current limitations. A first main section treats electrochemical biosensors for PSA, with subsections on methods based on the use of gold electrodes, graphene or graphene-oxide, carbon nanotubes, hybrid nanoparticles, and other types of nanoparticles. It also covers electrochemical methods based on the enzyme-like activity of PSA, on DNA-, aptamer- and biofuel cell-based methods, and on the detection of PSA via its glycan part. The next main section covers optical biosensors, with subsections on methods making use of surface plasmon resonance (SPR), localized SPR and plasmonic ELISA-like schemes. This is followed by subsections on methods based on the use of fiber optics, fluorescence, chemiluminescence, Raman scattering and SERS, electrochemiluminescence and cantilever-based methods. The most sensitive biosensors are the electrochemical ones, with lowest limits of detection (down to attomolar concentrations), followed by mass cantilever sensing and electrochemilumenescent strategies. Optical biosensors show lower performance, but are still more sensitive compared to standard ELISA. The most commonly applied nanomaterials are metal and carbon-based ones and their hybrid composites used for different amplification strategies. The most attractive sensing schemes are summarized in a Table. The review ends with a section on conclusions and perspectives.