MnO2 nanosheet-assisted ligand-DNA interaction-based fluorescence polarization biosensor for the detection of Ag+ ions

A label-free photoelectrochemical biosensor for silver ions based on Zn-Co doped C and CdS QD nanomaterials

A sensitive photoelectrochemical (PEC) biosensor for silver ions (Ag+) was developed based on Zn-Co doped C and CdS quantum dot (CdS QD) nanomaterials. Hydrophobic modified sodium alginate (HMA), which could stabilize and improve the PEC performance of CdS QDs, was also used for the construction of PEC sensors. Especially, Zn-Co doped C, CdS QDs and HMA were sequentially modified onto an electrode surface via the drop-coating method, and a C base rich DNA strand was then immobilized onto the modified electrode. As the C base in DNA specifically recognized Ag+, it formed a C-Ag+-C complex in the presence of Ag+, which created a spatial steric hindrance, resulting in a reduced PEC response. The sensing platform is sensitive to Ag+ in the range of 10.0 fM to 0.10 μM, with a limit of detection of 3.99 fM. This work offers an ideal platform to determine trace heavy metal ions in environmental monitoring and bioanalysis.

A new route towards polarized luminescence: 0D/2D nanocomposites

Combining wide bandgap 2D inorganic materials and blue-light-emitting 0D carbon dots in 0D/2D heterojunction nanocomposites was shown to give rise to unique optical properties and a multifunctional prototype device was developed, capable of polarized light luminescence, modulation and detection.

The ratiometric fluorescent sensor based on the mixture of CdTe quantum dots and graphene quantum dots for quantitative analysis of silver in drinks

Silver nanoparticles can be used in antibacterial packaging or disinfection. Research has shown that sugary fluid induces the leaching of silver nanoparticles into water, which may be harmful to humans. Single wavelength fluorescence analysis has been used for quantitative analysis of silver nanoparticles but suffers from low specificity and poor anti-interference ability. In this paper, a ratiometric fluorescence sensor system (GCS) was used for the detection of Ag+, which realized both visual detection and quantitative analysis of silver in drinks. The color changes of GCS with different concentrations of Ag+ are distinguishable and easy to analyze. There is also a good linear relationship between the concentrations of Ag+ and varieties of F424 nm/F570 nm, and the lowest detection limit reached 0.2266 nmol/L. This GCS shows good selectivity and recovery and could be used for the detection of Ag+ in drink samples.

Self-Assembly of Multivalent Aptamer-Tethered DNA Monolayers Dedicated to a Fluorescence Polarization-Responsive Circular Isothermal Strand Displacement Amplification for Salmonella Assay

Pathogenic bacteria are pathogens widely spread that are capable of causing mild to life-threatening diseases in human beings or other organisms. Rationally organizing the simple helical motif of double-stranded DNA (dsDNA) tiles into designed ensemble structures with architecturally defined collective properties could lead to promising biosensing applications for pathogen detection. In this work, we facilely engineered multivalent hairpin aptamer probe-tethered DNA monolayers (MHAP-DNA monolayers) and applied them to build a fluorescence polarization-responsive circular isothermal strand displacement amplification (FP-CSDA) for Salmonella assay. In this system, the MHAP-DNA monolayers were constructed based on a dsDNA tile-directed self-assembly. A FAM-labeled reporting probe (RP^FAM) with an inherent low FP signal serves as the signaling unit. The presence of target Salmonella leads to the trapping of F RP^FAM into the super DNA monolayers via a target-triggered CSDA to peel off the tethered hairpin-structured aptamer probes (HAPs) responsible for the binding of RP^FAM. As a result, the FP signal of the FAM fluorophore can be remarkably amplified due to the recycling of target Salmonella and the capacity of structural DNA materials to strongly restrict the free rotation of the FAM fluorophore but without a fluorescence quenching effect. Experimental results demonstrate that the FP assay is able to detect Salmonella with a low limit of detection (LOD) of 7.2 × 10⁰ CFU/mL and high specificity. As a proof-of-concept study, we envision our study using DNA nanoarchitecture as the foundation to modulate CSDA-based FP assays, promising to open up a new avenue for disease diagnosis, food safety detection, and biochemical studies.

Tetrabutylammonium-chloride-glycerol of deep eutectic solvent functionalized MnO2: a novel mimic enzyme for the quantitative and qualitative colorimetric detection of L-cysteine

L-Cysteine is a common amino acid that plays an important role in human livelihood and production. Therefore, a novel method for the simultaneous quantitative and qualitative determination of L-cysteine by a colorimetric detection system is proposed. As a viable oxidase mimic, [N₄₄₄₄]Cl-G/MnO₂, which consisted of MnO₂ nanosheets functionalized by a tetrabutylammonium chloride-glycerol ([N₄₄₄₄]Cl-G) based deep eutectic solvent (DES) was fabricated. Owing to the oxidation of MnO₂ nanosheets, [N₄₄₄₄]Cl-G/MnO₂ could oxidize the colorless 3,3',5,5'-tetramethylbenzidine (TMB) into a blue product (oxTMB) with the characteristic UV-vis spectrum absorbance at 652 nm. The oxidation of TMB by DES/MnO₂ was inhibited when L-cysteine was introduced, and the absorbance decreased proportionally with the increase in L-cysteine concentration. Due to this inhibition effect, a colorimetric detection system ([N₄₄₄₄]Cl-G/MnO₂-TMB) was developed for the quantitative determination of L-cysteine. Under optimal conditions, the assay showed good linearity over the concentration range of 0.125-2.00 μg mL^-1 with a low detection limit of 5.96 ng mL^-1. A study of the inhibition mechanism demonstrated that the sulfhydryl group of L-cysteine could decompose [N₄₄₄₄]Cl-G/MnO₂ into Mn²⁺, thus limiting the conversion of TMB to oxTMB. In addition, the [N₄₄₄₄]Cl-G/MnO₂-TMB system was used in test strips for the visual qualitative detection of L-cysteine. The selectivity and test strip results demonstrated the high selectivity, simple operation, and rapid response of the [N₄₄₄₄]Cl-G/MnO₂-TMB system for the qualitative detection of L-cysteine. Given the satisfying performance of the detection strategy, colorimetric sensing based on the [N₄₄₄₄]Cl-G/MnO₂-TMB system is considered to have prospective application value in the quantitative and qualitative detection of L-cysteine.

Dual-emissive ratiometric fluorescent nanosensor based on multi-nanomaterials for Ag+ determination in lake water

In this study, a sensitive ratiometric fluorescent nanosensor was constructed using a facile one-pot method by encapsulating carbon dots (CDs) and cadmium telluride quantum dots (CdTe QDs) into the pore cavities of a metal-organic framework (ZIF-8). In this nanosensor (CD/CdTe QD@ZIF-8), the fluorescence attributed to CdTe QDs was quenched by silver ions (Ag⁺), and the fluorescence intensity of CDs did not change. The introduction of ZIF-8 into the system can not only adsorb Ag⁺ but also easily separate CDs and CdTe QDs from the matrix. The developed CD/CdTe QD@ZIF-8 composite used as a ratiometric fluorescent probe exhibited high sensitivity and selectivity towards Ag⁺. The working linear range was 0.1-20 μM with a limit of detection (LOD) of 1.49 nM. Finally, the proposed nanosensor was applied to determine Ag⁺ in lake water with satisfactory results.

Nanomaterials Used in Fluorescence Polarization Based Biosensors

Fluorescence polarization (FP) has been applied in detecting chemicals and biomolecules for early-stage diagnosis, food safety analyses, and environmental monitoring. Compared to organic dyes, inorganic nanomaterials such as quantum dots have special fluorescence properties that can enhance the photostability of FP-based biosensing. In addition, nanomaterials, such as metallic nanoparticles, can be used as signal amplifiers to increase fluorescence polarization. In this review paper, different types of nanomaterials used in in FP-based biosensors have been reviewed. The role of each type of nanomaterial, acting as a fluorescent element and/or the signal amplifier, has been discussed. In addition, the advantages of FP-based biosensing systems have been discussed and compared with other fluorescence-based techniques. The integration of nanomaterials and FP techniques allows biosensors to quickly detect analytes in a sensitive and cost-effective manner and positively impact a variety of different fields including early-stage diagnoses.

Synergistic Effect Improves the Response of Active Sites to Target Variations for Picomolar Detection of Silver Ions

Heavy metal ions seriously threaten human health; even a trace of them can damage the renal, nervous, and immune systems irreversibly. Although established nanozyme-based colorimetric assays have been designed for the rapid detection of heavy metal ions, the general contained surface organic ligands of nanocatalysts and low absorptivity of metal ions on solid substrates might result in a weak effect on active sites and prevent the realization of their full detection potential. Here, we developed a nanozyme-based colorimetric sensor (CPM-Pt) made by pyrolysis of peat moss with preabsorbed traces of Pt ions to ultrasensitively detect Ag⁺. The calcination removes organic components and produces bare nanozymes that expose rich active sites. The strong protective effect from the porous carbon support enables the embedded Pt nanoparticles (Pt NPs) with a partially stable positive charge after pyrolysis (∼28% Pt²⁺ species). By the d⁸-d¹⁰ metal-metal interactions between Pt²⁺ (4f¹⁴5d⁸) and Ag⁺ (4d¹⁰), the high proportion of Pt²⁺ species on the surface of Pt NPs can readily capture/absorb Ag⁺. Subsequently, Ag⁺ accepts electrons from the support to form Ag atoms, which rapidly cover the peroxidase-like active sites of bare Pt NPs, weakening the activation of H₂O₂ to realize the response of Ag⁺. The colorimetric detection limit of Ag⁺ reached an unprecedented 1.1 pM, and the corresponding naked-eye color recognition is ultrasensitive to extremely low levels (100 pM).

An amplified fluorescence polarization assay for sensitive sensing of organophosphorus pesticides via MnO2 nanosheets

It is highly desirable to develop a simple, efficient and sensitive strategy for organophosphorus pesticides (OPs) in both environment pollution and human health. Herein, a novel amplified fluorescence polarization (FP) biosensor was established for highly sensitive detection of OPs using MnO₂ nanosheets as the signal enhancer. In this system, OPs can suppress the activity of acetylcholinesterase (AChE) efficiently, blocking the hydrolysis reaction of acetylthiocholine (ATCh) to generate thiocholine (TCh) by AChE. TCh can lead the decomposition of MnO₂ nanosheets to manganese ions. So, without the influence of TCh, MnO₂ nanosheets can maintain its original shape and form a stable complex with FAM-DNA, which greatly enhanced the FP signal. This method can tremendously improve the sensitivity of FP with a detection limit of 0.01 ng/mL for diazinon. In addition, it was also applicable to determine other four OPs and investigate the level of diazinon in real water samples. Consequently, the proposed approach provides a new promising platform for detection of OPs and is expected to be used in application of environmental monitoring.

Recent advances in fluorescence anisotropy/polarization signal amplification

Fluorescence anisotropy/polarization is an attractive and versatile technique based on molecular rotation in biochemical/biophysical systems. Traditional fluorescence anisotropy/polarization assays showed relatively low sensitivity for molecule detection, because widespread molecular masses are too small to produce detectable changes in fluorescence anisotropy/polarization value. In this review, we discuss in detail how the potential of fluorescence anisotropy/polarization signal approach considerably expanded through the implementation of mass amplification, recycle the target amplification, fluorescence probes structure-switching amplification, resonance energy transfer amplification, and provide perspectives at future directions and applications.

A novel dual-emission fluorescent probe for ratiometric and visual detection of Cu2+ ions and Ag+ ions

In this work, the biomolecule glutathione was used to prepare cyan fluorescent carbon dots (GSH@CDs) by a hydrothermal method. The GSH@CDs were adopted as the scaffolds to synthesize fluorescent gold nanoclusters (GSH@CDs-Au NCs) with two independent emission peaks at 430 nm and 700 nm. A fluorescent method for the Cu²⁺ and Ag⁺ ion assay was established based on the fluorescence quenching or enhancement at 700 nm of GSH@CDs-Au NCs. The fluorescent test strips were successfully prepared for visual detection of Cu²⁺ ions and Ag⁺ ions based on GSH@CDs-Au NCs. In addition, GSH@CDs-Au NCs were found to possess well peroxidase-like activity.

Photoelectrochemical assay based on CdS nanocrystal\hexagonal carbon-nitrogen tube nanocomposite for detection of silver ions

A photochemical assay was reported based on CdS nanocrystal (NC)\hexagonal carbon-nitrogen tube (HCNT) nanocomposite for the detection of Ag⁺. When CdS NCs were combined with HCNT, the photocurrent intensity was increased extensively. After incubation of Ag⁺ with CdS NC\HCNT nanocomposite-modified electrode, Ag₂S was formed on the electrode by the ion-change reaction. As the band gap of Ag₂S cannot match well with HCNT, the photogenerated electron-hole pairs cannot separate efficiently, so the photocurrent intensity decreases. A good linear relationship between the concentration of Ag⁺ in the range from 0.01 to 3 μM and the corresponding photocurrent intensity was obtained with a detection limit of 3.3 nM (S/N = 3). The assay was employed to detect Ag⁺ in lake water and human serum with satisfactory results, which indicated that it might have a broad application in different areas. Photoelectrochemical assay was reported based on CdS nanocrystal\hexagonal carbon-nitrogen tube nanocomposite for detection of Ag^.

Controlling the ligands of CdZnTe quantum dots to design a super simple ratiometric fluorescence nanosensor for silver ion detection

A super simple ratiometric fluorescence nanosensor has been fabricated by controlling the ligands of CdZnTe quantum dots (QDs), allowing the sensitive and visual detection of silver ions (Ag⁺). The green-emitting L-cysteine-protected CdZnTe QDs (Lcys-CdZnTe QDs) had a specific response to Ag⁺ and were used as the reporting probe, while the red-emitting N-acetyl-L-cysteine-protected CdZnTe QDs (NAC-CdZnTe QDs) showed no obvious response to all tested metal ions and were selected as the reference probe. Simply mixing them without any encapsulated synthesis ultimately produced a time-saving, low-cost detection method, allowing the sensitive and visual detection of Ag⁺ in samples. The proposed nanosensor exhibited a linear range of 0.5-4.0 μM along with a detection limit of 0.17 μM, and has been successfully applied in real tap water and lake water samples. This nanosensor also showed obvious color changes in the detection process and has potential in visual semi-quantitative detection. Our approach may provide a general and feasible strategy for designing ratiometric fluorescence nanosensors, which will attract a wide range of interest in sensing-related fields.

Fluorescence Polarization-Based Bioassays: New Horizons

Fluorescence polarization holds considerable promise for bioanalytical systems because it allows the detection of selective interactions in real time and a choice of fluorophores, the detection of which the biosample matrix does not influence; thus, their choice simplifies and accelerates the preparation of samples. For decades, these possibilities were successfully applied in fluorescence polarization immunoassays based on differences in the polarization of fluorophore emissions excited by plane-polarized light, whether in a free state or as part of an immune complex. However, the results of recent studies demonstrate the efficacy of fluorescence polarization as a detected signal in many bioanalytical methods. This review summarizes and comparatively characterizes these developments. It considers the integration of fluorescence polarization with the use of alternative receptor molecules and various fluorophores; different schemes for the formation of detectable complexes and the amplification of the signals generated by them. New techniques for the detection of metal ions, nucleic acids, and enzymatic reactions based on fluorescence polarization are also considered.

A Novel Polydopamine Grafted 3D MOF Nanocubes Mediated GR-5/GC DNAzyme Complex with Enhanced Fluorescence Emission Response toward Spontaneous Detection of Pb(II) and Ag(I) Ions

In this work, we have proposed a novel DNAzyme/MnCoPBAs-PDANCs complex-based fluorescence biosensor for subsequent detection of Pb²⁺ and Ag⁺ ions. The GR-5/GC-rich DNAzymes are strongly anchored or quenched on the surface of polydopamine hybridized 3D metal-organic framework MnCoPBAs-PDANCs by π-π stacking interaction. Addition of Pb²⁺ ions has exhibited a catalytic inner cleavage of DNAzyme complex and disturbs to release shorter GC-rich sequence over the surface of MnCoPBAs-PDANCs complexes. Later on, addition of intercalating dye ThT interacts with free GC-rich substrate strand to form a G-quadruplex-ThT structure and thereby effectively enhanced the fluorescence intensity ("turn-on"). Interestingly, subsequent addition of Ag⁺ ions has an uncoiled GQ-ThT structure to provide a robust double-stranded DNA featuring C-Ag⁺-C, which diminishes ("turn-off") the fluorescence intensity. This improved hybrid sensor exhibited a linear response in a concentration range of 3-9 nM for Pb²⁺, while 4-20 nM for Ag⁺ ions with a lower detection limit of 1.6 and 4.2 nM, respectively. Further, the method was successfully implemented for the analysis of Pb²⁺ and Ag⁺ ions in real water samples with a good regaining and high efficacy for practical analysis.

Manganese Oxide Nanomaterials: Synthesis, Properties, and Theranostic Applications

Despite the comprehensive applications in bioimaging, biosensing, drug/gene delivery, and tumor therapy of manganese oxide nanomaterials (MONs including MnO₂ , MnO, Mn₂ O₃ , Mn₃ O₄ , and MnO_x ) and their derivatives, a review article focusing on MON-based nanoplatforms has not been reported yet. Herein, the representative progresses of MONs on synthesis, heterogene, properties, surface modification, toxicity, imaging, biodetection, and therapy are mainly introduced. First, five kinds of primary synthetic methods of MONs are presented, including thermal decomposition method, exfoliation strategy, permanganates reduction method, adsorption-oxidation method, and hydro/solvothermal. Second, the preparations of hollow MONs and MON-based composite materials are summarized specially. Then, the chemical properties, surface modification, and toxicity of MONs are discussed. Next, the diagnostic applications including imaging and sensing are outlined. Finally, some representative rational designs of MONs in photodynamic therapy, photothermal therapy, chemodynamic therapy, sonodynamic therapy, radiotherapy, magnetic hyperthermia, chemotherapy, gene therapy, starvation therapy, ferroptosis, immunotherapy, and various combination therapy are highlighted.

DNA nanosheet as an excellent fluorescence anisotropy amplification platform for accurate and sensitive biosensing

Recently, various inorganic nanomaterials have been used as fluorescence anisotropy (FA) enhancers for biosensing successfully. However, most of them are size-uncontrollable and possess an intensive fluorescence quenching ability, which will seriously reduce the accuracy and sensitivity of FA method. Herein, we report a two-dimensional DNA nanosheet (DNS) without fluorescence quenching effect as a novel FA amplification platform. In our strategy, fluorophore-labeled probe DNA (pDNA) is linked onto the DNS surface through the hybridization with the handle DNA (hDNA) that extended from the DNS, resulting in the significantly enhanced FA value. After the addition of target, the pDNA was released from the DNS surface due to the high affinity between the hDNA and target, and the FA was decreased. Thus, target could be detected by the significantly decreased FA value. The linear range was 10-50 nM and the limit of detection was 8 nM for the single-stranded DNA detection. This new method is general and has been also successfully applied for the detection of ATP and thrombin sensitively. Our method improved the accuracy of FA assay and has great potential to detect series of biological analytes in complex biosensing systems.

A composite prepared from MnO2 nanosheets and a deep eutectic solvent as an oxidase mimic for the colorimetric determination of DNA

A composite was fabricated from deep eutectic solvent and MnO₂ nanosheets (DES/MnO₂) and is shown to be a viable oxidase mimic. The property, morphology and composition of DES/MnO₂ was characterized. DES/MnO₂ displays oxidase-like activity and can oxidize 3,3',5,5'-tetramethylbenzidine (TMB) to form a blue product (oxTMB) with an absorption maximum at 652 nm. Due to the presence of the DES, the polyanionic and negatively charged DNA is easily adsorbed on the surface of the composite by hydrogen bonding and electrostatic interactions. This leads to the inhibition of the oxidase-mimicking activity of DES/MnO₂. This finding was used to design a colorimetric method for the determination of DNA. The assay work in the 10-100 μg mL^-1 DNA concentration range and has a detection limit of 0.37 μg mL^-1. The inhibiting mechanism was further studied by zeta potential measurements, dynamic light scattering and transmission electron microscopy. The selectivity study shows the DES/MnO₂-TMB system to be highly selective for DNA when compared with many proteins, carbohydrates, salts and amino acid. RNA, on the other hand, interferes. The real sample analysis result illustrates that the new method can be used for the detection of DNA in bovine whole blood. Graphical abstractA novel oxidase mimic based on deep eutectic solvent-functionalized MnO₂ nanosheets was synthesized, which can directly catalyze oxidation of 3,3',5,5'-tetramethylbenzidine (TMB, colorless) to oxTMB (blue). A sensitive and convenient colorimetric strategy for visual detection of DNA was established through DES/MnO₂-TMB sensing system.

Fluorescence Polarization for Probing DNA Adsorption by Nanomaterials and Fluorophore/DNA Interactions

Fluorescence polarization (FP) is attractive for measuring binding interactions and has been recently used to study DNA adsorption on nanomaterials. Since most nanomaterials are strong fluorescence quenchers, correlations among adsorption efficiency, quenching efficiency, and FP need to be interpreted carefully. In this work, carboxyfluorescein (FAM)-labeled DNA oligonucleotides were studied under various quenching conditions. First, quenching was induced by lowering the pH, taking advantage of the fact that FAM is almost nonfluorescent at a pH below 4. Strong interactions were observed between the FAM label and polyadenine DNA, as judged by the increased FP at low pH, while FAM-labeled polythymine DNA was less affected by the pH. Comparisons were also performed with FAM-labeled poly(ethylene glycol) and bovine serum albumin. An equation was derived to calculate the effect of fluorescence quenching and DNA adsorption by nanomaterials. For strongly quenching nanomaterials, such as graphene oxide, DNA adsorption alone does not change the measured FP. Light scattering and weak fluorescence from graphene oxide increase FP in these cases. For comparison, a strongly adsorbing but weak quenching material, Y₂O₃, was also studied and the result was consistent with a normal binding reaction. Overall, FP is a powerful technique for binding and adsorption assays, but quenched samples need to be interpreted with care.

Manganese dioxide nanosheets: from preparation to biomedical applications

Advancements in nanotechnology and molecular biology have promoted the development of a diverse range of models to intervene in various disorders (from diagnosis to treatment and even theranostics). Manganese dioxide nanosheets (MnO₂ NSs), a typical two-dimensional (2D) transition metal oxide of nanomaterial that possesses unique structure and distinct properties have been employed in multiple disciplines in recent decades, especially in the field of biomedicine, including biocatalysis, fluorescence sensing, magnetic resonance imaging and cargo-loading functionality. A brief overview of the different synthetic methodologies for MnO₂ NSs and their state-of-the-art biomedical applications is presented below, as well as the challenges and future perspectives of MnO₂ NSs.

Recent advances in functionalized MnO2 nanosheets for biosensing and biomedicine applications

As one kind of redox active layered transition-metal dioxide nanomaterials, single-layer manganese dioxide (MnO₂) nanosheets have gained significant research attention in the fields of biosensing and biomedicine because of their large surface area, intense and broad optical absorption, strong oxidation ability, catalytic activity, and robust mechanical properties. This review provides a brief overview of the recent advances in the development of MnO₂ nanosheet-based biosensors, bioimaging as well as drug delivery for cancer therapy. The methodologies for the preparation of MnO₂ nanosheets are summarized, followed by an introduction of the nanostructure and properties of MnO₂ nanosheets. Special attention is paid to their applications in biosensing, bioimaging and cancer therapy. Future perspectives and the challenges of high-performance MnO₂ nanosheets are also discussed.

Novel dual-functional fluorescent sensors based on bis(5,6-dimethylbenzimidazole) derivatives for distinguishing of Ag+ and Fe3+ in semi-aqueous medium

Three novel bisbenzimidazole derivatives have been synthesized and developed as dual-functional fluorescent sensors for the rapid and highly selective detection of Ag⁺ and Fe³⁺ ions in semi-aqueous medium with distinct spectral response for the first time. The absorption intensity is drastically decreased after the addition of Ag⁺. Contrarily, it is markedly increased upon the addition of Fe³⁺. And there is a good linear relation at low concentration of both Ag⁺ and Fe³⁺, which provides a quantitative method for their detection. Similarly, the sensors show a distinct fluorescence response towards Ag⁺ and Fe³⁺ with a different fluorescence color change under UV light. In addition, no significant changes and interference can be observed with other metal ions. The sensing mechanism studies confirm that the N atom in CN of benzimidazole ring of sensor 4a may bind with Ag⁺ or Fe³⁺ ion to form metal complex. And there is only a static quenching process for the 4-Ag⁺ complex system, but both dynamic and static quenching processes occur in the 4-Fe³⁺ complex system. Moreover, sensors 4 can steadily work in solution with a wide range of pH 4-13 and rapidly respond to Ag⁺ and Fe³⁺ with a response time of 10 s. Finally, the sensors have been successfully applied to the visual detection of Ag⁺ and Fe³⁺ not only in solution, but also in test paper.

Ultrasensitive colorimetric determination of silver(I) based on the peroxidase mimicking activity of a hybrid material composed of graphitic carbon nitride and platinum nanoparticles

A hybrid material composed of graphitic carbon nitride (g-C₃N₄) and platinum nanoparticles (PtNPs) with peroxidase mimicking activity was used to design a rapid, sensitive and low-cost colorimetric method for the determination of Ag(I). The g-C₃N₄-PtNPs hybrid was synthesized by reduction of chloroplatinic acid using sodium borohydride under ultrasonication and in the presence of g-C₃N₄. The hybrid can catalyze the oxidation 3,3',5,5'-tetramethylbenzidine (TMB) to produce a blue-colored product with an absorption maximum at 652 nm. On addition of Ag(I) and in the presence of citric acid, it will be reduced to form Ag(0) under the catalytic action of PtNPs. Ag(0) is then adsorbed on the surface of the g-C₃N₄-PtNPs. This results in the inhibition of the enzyme mimetic activity of the hybrid. Hence, less blue product will be formed from TMB. Under optimum conditions, Ag(I) can be quantified in the 0.05-5.0 nM concentration range with a 22 pM detection limit. This assay is rapid and reliable and was applied to the determination of Ag(I) in spiked real water samples. Graphical abstract A hybrid nanomaterial consisting of graphitic carbon nitride and platinum nanoparticles (g-C₃N₄-PtNPs) can catalyze the oxidation of tetramethylbenzidine (TMB) to produce a blue-colored product (TMBox). The enzyme mimetic activity of the hybrid is inhibited by Ag⁺, thereby decreasing the generation of blue product from TMB.

Design and Investigation of Optical Properties of N-(Rhodamine-B)-Lactam-Ethylenediamine (RhB-EDA) Fluorescent Probe

This study presents chemical modification of a Rhodamine B (RhB) sensor probe by ethylenediamine (EDA), and investigation of its spectral as well as sensor properties to the various metals. The synthesised N-(Rhodamine-B)-lactam-ethylenediamine (RhB-EDA) fluorescent probe shows interesting optical sensor properties, and high sensitivity and selectivity to Ag⁺ ions among all the tested metal ions (K⁺, Mg2+, Cu2+, Ni2+, Fe2+, Pb2+, Na⁺, Mn2+, Li⁺, Al3+, Co2+, Hg2+, Sr2+, Ca2+, Ag⁺, Cd2+ and Zn2+), while the well-known Rhodamine B (RhB) fluorescent probe shows much less sensitivity to Ag⁺ ions, but high sensitivity to Fe2+ ions. The novel fluorescent sensor probe RhB-EDA has the capabilities to sense Ag⁺ ions up to µM ranges by using the fluorescence quenching approach. The probe displayed a dynamic response to Ag⁺ in the range of 0.43 × 10-3-10-6 M with a detection limit of 0.1 μM. The sensing system of an RhB-EDA novel fluorescent probe was optimised according to the spectral properties, effect of pH and buffer, photostability, incubation time, sensitivity, and selectivity. Since all the spectral and sensing properties were tested in green aqueous media, although many other similar sensor systems rely on organic solvent solutions, the RhB-EDA sensing probe may be a good candidate for measuring Ag⁺ ions in real-life applications.

Two-Dimensional Oxides: Recent Progress in Nanosheets

Two-dimensional (2D) materials have been widely investigated for the last few years, introducing nanosheets and ultrathin films. The often superior electrical, optical and mechanical properties in contrast to their three-dimensional (3D) bulk counterparts offer a promising field of opportunities. Especially new research fields for already existing and novel applications are opened by downsizing and improving the materials at the same time. Some of the most promising application fields are namely supercapacitors, electrochromic devices, (bio-) chemical sensors, photovoltaic devices, thermoelectrics, (photo-) catalysts and membranes. The role of oxides in this field of materials deserves a closer look due to their availability, durability and further advantages. Here, recent progress in oxidic nanosheets is highlighted and the benefit of 2D oxides for applications discussed in-depth. Therefore, different synthesis techniques and microstructures are compared more closely.

Internal standard-based SERS aptasensor for ultrasensitive quantitative detection of Ag+ ion

A ratiometric surface-enhanced Raman scattering (SERS) aptasensor based on internal standard (IS) methods was proposed for the ultrasensitive and reproducible quantitative detection of silver ion (Ag⁺) with Au@Ag core-shell nanoparticle (Au@Ag NP) substrate. In principle, the thiolated 5'-Rox C-containing labeled aptamer probe (Rox-aptamer) is firstly immobilized on the SERS substrate surface and then hybridizes with the complementary DNA (cDNA) to form a rigid double-stranded DNA (dsDNA), in which the Rox Raman labels is used to produce the Raman signal. Furthermore, the pyridine is employed as an IS element to provide the ratiometric determination of target. In the presence of Ag⁺, the Rox-aptamer is turned into the cytosine (C)-Ag⁺-C mediated hairpin structure, which remarkably reduces the distance between the Rox labels and the Au@Ag NP surface responsible for a measurable 'turn-on' signal change of Rox. This IS-based ratiometric SERS aptasensor exhibits a limit of detection of 50 pM for Ag⁺ with a linear detection range from 0.1 to 100 nM and the shortcoming of irreproducibility of SERS signal could be overcome. The proposed method provides a simple, robust, and rapid approach for the sensitive and reproducible quantitative detection of Ag⁺, and it could also be used for the detection of other metal ions which exhibits specific interactions with natural or synthetic bases.

Fluorescent DNA Probing Nanoscale MnO2: Adsorption, Dissolution by Thiol, and Nanozyme Activity

Manganese dioxide (MnO₂) is an interesting material due to its excellent biocompatibility and magnetic properties. Adsorption of DNA to MnO₂ is potentially of interest for drug delivery and sensing applications. However, little fundamental understanding is known about their interactions. In this work, carboxyfluorescein (FAM)-labeled DNA oligonucleotides were used to explore the effect of salt concentration, pH, and DNA sequence and length for adsorption by MnO₂, and comparisons were made with graphene oxide (GO). The DNA desorbs from MnO₂ by free inorganic phosphate, while it desorbs from GO by adenosine and urea. Therefore, DNA is mainly adsorbed on MnO₂ through its phosphate backbone, and DNA has a stronger affinity on MnO₂ than on GO based on a salt-shock assay. At the same time, DNA was used to study the effect of thiol containing compounds on the dissolution of MnO₂. Adsorbed DNA was released from MnO₂ after its dissolution by thiol, but not from other metal oxides with lower solubility such as CeO₂, TiO₂, and Fe₃O₄. DNA-functionalized MnO₂ was then used for detecting glutathione (GSH) with a detection limit of 383 nM. Finally, DNA was found to inhibit the peroxidase-like activity of MnO₂. This study has offered many fundamental insights into the interaction between MnO₂ and two important biomolecules: DNA and thiol-containing compounds.

A Simple Assay for Ultrasensitive Colorimetric Detection of Ag⁺ at Picomolar Levels Using Platinum Nanoparticles

In this work, uniformly-dispersed platinum nanoparticles (PtNPs) were synthesized by a simple chemical reduction method, in which citric acid and sodium borohydride acted as a stabilizer and reducer, respectively. An ultrasensitive colorimetric sensor for the facile and rapid detection of Ag⁺ ions was constructed based on the peroxidase mimetic activities of the obtained PtNPs, which can catalyze the oxidation of 3,3’,5,5’-tetramethylbenzidine (TMB) by H₂O₂ to produce colored products. The introduced Ag⁺ would be reduced to Ag⁰ by the capped citric acid, and the deposition of Ag⁰ on the PtNPs surface, can effectively inhibit the peroxidase-mimetic activity of PtNPs. Through measuring the maximum absorption signal of oxidized TMB at 652 nm, ultra-low detection limits (7.8 pM) of Ag⁺ can be reached. In addition to such high sensitivity, the colorimetric assay also displays excellent selectivity for other ions of interest and shows great potential for the detection of Ag⁺ in real water samples.

Introducing Ratiometric Fluorescence to MnO2 Nanosheet-Based Biosensing: A Simple, Label-Free Ratiometric Fluorescent Sensor Programmed by Cascade Logic Circuit for Ultrasensitive GSH Detection

Glutathione (GSH) plays crucial roles in various biological functions, the level alterations of which have been linked to varieties of diseases. Herein, we for the first time expanded the application of oxidase-like property of MnO₂ nanosheet (MnO₂ NS) to fluorescent substrates of peroxidase. Different from previously reported fluorescent quenching phenomena, we found that MnO₂ NS could not only largely quench the fluorescence of highly fluorescent Scopoletin (SC) but also surprisingly enhance that of nonfluorescent Amplex Red (AR) via oxidation reaction. If MnO₂ NS is premixed with GSH, it will be reduced to Mn²⁺ and lose the oxidase-like property, accompanied by subsequent increase in SC's fluorescence and decrease in AR's. On the basis of the above mechanism, we construct the first MnO₂ NS-based ratiometric fluorescent sensor for ultrasensitive and selective detection of GSH. Notably, this ratiometric sensor is programmed by the cascade logic circuit (an INHIBIT gate cascade with a 1 to 2 decoder). And a linear relationship between ratiometric fluorescent intensities of the two substrates and logarithmic values of GSH's concentrations is obtained. The detection limit of GSH is as low as 6.7 nM, which is much lower than previous ratiometric fluorescent sensors, and the lowest MnO₂ NS-based fluorescent GSH sensor reported so far. Furthermore, this sensor is simple, label-free, and low-cost; it also presents excellent applicability in human serum samples.

Metal ion detection using functional nucleic acids and nanomaterials

Metal ion detection is critical in a variety of areas. The past decade has witnessed great progress in the development of metal ion sensors using functional nucleic acids (FNAs) and nanomaterials. The former has good recognition selectivity toward metal ions and the latter possesses unique properties for enhancing the performance of metal ion sensors. This review offers a summary of FNA- and nanomaterial-based metal ion detection methods. FNAs mainly include DNAzymes, G-quadruplexes, and mismatched base pairs and nanomaterials cover gold nanoparticles (GNPs), quantum dots (QDs), carbon nanotubes (CNTs), and graphene oxide (GO). The roles of FNAs and nanomaterials are introduced first. Then, various methods based on the combination of different FNAs and nanomaterials are discussed. Finally, the challenges and future directions of metal ion sensors are presented.

Fluorescence Determination of Omethoate Based on a Dual Strategy for Improving Sensitivity

Omethoate is a frequently used organophosphorus pesticide, and the establishment of a sensitive, selective, and simple method to determine omethoate is very important for food safety. In this paper, a dual strategy was applied to improve the detection sensitivity of omethoate. In the first strategy, graphene quantum dots (GQDs) were doped with nitrogen to increase the fluorescence quantum yield to 30%. By coupling N-GQDs with omethoate aptamer, an N-GQDs-aptamer probe was synthesized. The fluorescence of the N-GQDs-aptamer probe was turned off by graphene oxide (GO), but recovered by omethoate. Based on this principle, the fluorescence method for detecting omethoate was established with a detection limit of 0.041 nM. To further improve the detection sensitivity, the fluorescence polarization analysis method was applied as another strategy based on the polarization signal of GQDs. The detection limit was decreased to 0.029 pM by using the fluorescence polarization method. The detection limits in this paper were lower than those in other reports. The imaging of omethoate on plant leaves showed that the probe could be used for visual semiquantitative determination of omethoate.