Ultrasensitive sandwich-type photoelectrochemical immunosensor based on CdSe sensitized La-TiO2 matrix and signal amplification of polystyrene@Ab2 composites

A Branched Rutile/Anatase Phase Structure Electrode with Enhanced Electron-Hole Separation for High-Performance Photoelectrochemical DNA Biosensor

A photoelectrochemical (PEC) detection platform was built based on the branched rutile/anatase titanium dioxide (RA-TiO₂) electrode. Theoretical calculations proved that the type-II band alignment of rutile and anatase could facilitate charge separation in the electrode. The self-generated electric field at the interface of two phases can enhance the electron transfer efficiency of the electrode. Carboxylated CdTe quantum dots (QDs) were applied as signal amplification factors. Without the target DNA presence, the CdTe QDs were riveted to the surface of the electrode by the hairpin probe DNA. The sensitization of CdTe QDs increased the photocurrent of the electrode significantly. When the target DNA was present, the structural changes of the hairpin probe DNA resulted in the failure of the sensitized structure. Benefiting from excellent electrode structure design and CdTe QDs sensitization strategy, the PEC assays could achieve highly sensitive and specific detection of target DNA in the range of 1 fM to 1 nM, with a detection limit of 0.23 fM. The electrode construction method proposed in this article can open a new avenue for the preparation of more efficient PEC sensing devices.

A sensitive label-free biosensor based on Ag2S-sensitived Bi2WO6/BiOBr heterojunction for photoelectrochemical immunoassay of prostate specific antigen

Prostate cancer is one of the most common cancers in the world, and its early diagnosis can effectively reduce mortality. A new label-free photoelectrochemical (PEC) immunosensor on the basis of Bi₂WO₆/BiOBr nanocomposite materials has been successfully prepared for the test of prostate-specific antigen (PSA) in human serum in this work. The Ag₂S-sensitized Bi₂WO₆/BiOBr heterojunction was used as a photosensitive material, which effectively improved the photocurrent response. On Bi₂WO₆/BiOBr surface, dopamine immobilized PSA antibody by self-polymerizing to form polydopamine membrane. Antigen and antibody are specifically combined to achieve quantitative detection of PSA according to the current changes at different concentrations of antigen. Under the optimal experimental conditions, the PEC immunosensor has an ideal linear relationship between 1 pg/mL - 50 ng/mL, and the detection limit is 0.084 pg/mL. In addition, the prepared immunosensor has good stability, reproducibility and selectivity, providing a new method for the detection of PSA in actual sample analysis.

A label-free photoelectrochemical immunosensor for prostate specific antigen detection based on Ag2S sensitized Ag/AgBr/BiOBr heterojunction by in-situ growth method

Prostate cancer is one of the most common cancers in the world, and its early detection is vital to saving the lives of patients. In this research, a novel label-free photoelectrochemical immunosensor was designed for sensitive detection of prostate specific antigen (PSA). Ag₂S sensitized on Ag/AgBr/BiOBr heterojunction could effectively inhibit photogenic holes recombination and improve photocurrent response and sensitivity. Ascorbic acid was an effective electron donor, which can effectively eliminate photo-generated holes. The photocurrent reduced linearly with the logarithm of PSA concentration ranged from 0.001 to 50 ng·mL^-1 and the limit of detection was 0.25 pg·mL^-1. The designed sensor had the advantages of wide linear range, good stability, high reproducibility, and good selectivity. This study not only provided a method for efficient and sensitive detection of PSA, but also provided valuable reference ideas for the detection of other tumor markers.

An antibody-aptamer sandwich cathodic photoelectrochemical biosensor for the detection of progesterone

The progesterone (P4) level in body fluids can act as an indicator for early pregnancy diagnosis and offers insight into mammalian somatic function. In this work, we designed an antibody-aptamer based sandwich assay as a cathodic photoelectrochemical (PEC) biosensor for P4 detection. The composites of carbon dots and graphene oxide (CDs-GO) with favorable cathodic photocurrent response were used as photoactive materials on which the antibody (Ab) of P4 was immobilized. Meanwhile, high affinity truncated P4 aptamer was immobilized on Au-CuO-Cu₂O to act as a bioconjugate. When P4 was present, the aptamer-Au-CuO-Cu₂O bioconjugate could amplify the cathodic photocurrent of CDs-GO modified electrode through Ab-P4-aptamer interactions. Under optimum conditions, the cathodic photocurrent of the constructed PEC biosensor was found to increase linearly with P4 in a wide concentration range from 0.5 nM to 180 nM, with a low detection limit (3S/N) of 0.17 nΜ. The proposed cathodic PEC sensing platform demonstrated high selectivity, satisfying reproducibility, good stability. The sensor was successfully applied in the determination of P4 in human serum samples.

Recent Progress of Biomarker Detection Sensors

Early cancer diagnosis and treatment are crucial research fields of human health. One method that has proven efficient is biomarker detection which can provide real-time and accurate biological information for early diagnosis. This review presents several biomarker sensors based on electrochemistry, surface plasmon resonance (SPR), nanowires, other nanostructures, and, most recently, metamaterials which have also shown their mechanisms and prospects in application in recent years. Compared with previous reviews, electrochemistry-based biomarker sensors have been classified into three strategies according to their optimizing methods in this review. This makes it more convenient for researchers to find a specific fabrication method to improve the performance of their sensors. Besides that, as microfabrication technologies have improved and novel materials are explored, some novel biomarker sensors-such as nanowire-based and metamaterial-based biomarker sensors-have also been investigated and summarized in this review, which can exhibit ultrahigh resolution, sensitivity, and limit of detection (LoD) in a more complex detection environment. The purpose of this review is to understand the present by reviewing the past. Researchers can break through bottlenecks of existing biomarker sensors by reviewing previous works and finally meet the various complex detection needs for the early diagnosis of human cancer.

Photoelectrochemical biosensor for CEA detection based on SnS2-GR with multiple quenching effects of Au@CuS-GR

A novel signal on-off type photoelectrochemical (PEC) biosensing system was designed for sensitive detection of carcinoembryonic antigen (CEA) based on tin disulfide nanosheets loaded on reduced graphene cxide (SnS₂-GR) as the photoactive material and gold nanoparticles coated on reduced graphene oxide-functionalized copper sulfide (Au@CuS-GR) for signal amplification. It's the first time for SnS₂-GR was exploited as a sensing matrix. Here, the photocurrent signals of SnS₂ were amplified attributed to the sensitization effect of graphene. As signal amplifier, Au@CuS-GR could quench the photocurrents of SnS₂-GR not only through the p-n type semiconductor quenching effect as well as the steric hindrance effect, but also as peroxidase mimetics to catalyze the oxidation of 4-Chloro-1-naphthol (4-CN) to produce insoluble product on the electrode surface. Based on the multiple signal amplification ability of Au@CuS-GR, CEA was detected sensitively with a linear range from 0.1 pg mL^-1 to 10 ng mL^-1 and limit of detection down to 59.9 fg mL^-1 (S/N = 3). Meanwhile, the PEC biosensor displayed excellent performance in the assay of human serum sample, showing good application prospects for various target analysis.

A novel sandwich-type photoelectrochemical immunosensor based on Ru(bpy)32+ and Ce-CdS co-sensitized hierarchical ZnO matrix and dual-inhibited polystyrene@CuS-Ab2 composites

A novel and sensitive sandwich-type photoelectrochemical (PEC) immunosensor was developed for the quantitative detection of β-amyloid protein (Aβ). A ITO electrode was sequentially coated with hierarchical porous zinc oxide (ZnO) microspheres with a large specific area, sensitized with tris(bipyridine)ruthenium(II) ion (Ru(bpy)₃²⁺) to achieve high visible light absorption, and modified with cerium-doped cadmium sulfide (Ce-CdS) nanoparticles to enhance the PEC response. Under the stimulation of visible light and ascorbic acid as an efficient electron donor, the photoelectric signal of ZnO/Ru(bpy)₃²⁺/Ce-CdS was 70 times that of pure ZnO. The amino-functionalized polystyrene (PS) microspheres coated with copper sulfide (CuS) was linked with a secondary antibody (Ab₂) for the first time for the Aβ detection by the immunosensor. The good insulation and steric resistance of the as-prepared polystyrene@CuS-Ab₂ (PS@CuS-Ab₂) composite significantly weakened the photocurrent response of the immunosensor in the specific immune recognition. Under the optimal conditions, the quantitative detection of Aβ was achieved within the range of 0.001-100 ng/mL with the detection limit of 0.37 pg/mL. In addition, the PEC immunosensor is easy to make, stable and selective, which has provided a good experimental platform for the detection of disease biomarkers.

Cu2+-Modulated in situ growth of quantum dots for split-type photoelectrochemical immunoassay of prostate-specific antigen

A split-type photoelectrochemical immunosensor of PSA was developed using Cu²⁺-dependent catalytic oxidation for inhibiting the in situ growth of CdS QDs.

Photoelectrochemical biosensing of disease marker on p-type Cu-doped Zn0.3Cd0.7S based on RCA and exonuclease III amplification

In this work, a new "signal-on" split-type photoelectrochemical (PEC) sensing platform for prostate-specific antigen (PSA) detection was successfully constructed using p-type Cu-doped Zn_0.3Cd_0.7S as the photosensitive semiconductor material and target-triggered rolling circle amplification (RCA) for signal amplification. The signal derived from Cu-doped Zn_0.3Cd_0.7S was amplified by hemin/G-quadruplex. Upon target PSA introduction, the aptamer-primer probe (apt-pri) was captured by capture antibody-conjugated magnetic bead (MB-mAb) to form the sandwiched MB-mAb/PSA/apt-pri. The complex could initiate the RCA reaction to produce a long single-stranded DNA that provided binding sites for G-rich DNA and to form long single-stranded DNA/G-quadruplex/hemin. Upon the addition of exonuclease III (Exo III), the hemin/G-quadruplex immobilized on the RCA long product could be released by the digestion of Exo III. The hemin/G-quadruplex complexes in this study were used as efficient electron acceptors to neutralize the photoelectrons generated from the semiconductor and hindered the recombination of charges, thus enhancing the photocurrent. Under the optimum conditions, the developed sensing system displayed a good analytical performance with a linear range of 0.05-40 ng mL^-1 PSA and a detection limit of 16.3 pg mL^-1. Furthermore, good selectivity, high anti-interference ability, satisfactory reproducibility, and good accuracy were also achieved. These prominent analytical properties revealed that our strategy might be a potential and reliable tool for the detection of PSA.

A novel label-free photoelectrochemical immunosensor based on NCQDs and Bi2S3 co-sensitized hierarchical mesoporous SnO2 microflowers for detection of NT-proBNP

A novel label-free PEC immunosensor based on NCQDs and Bi₂S₃ co-sensitized hierarchical mesoporous SnO₂ microflowers was developed for NT-proBNP detection.

A ratiometric photoelectrochemical immunosensor based on g-C3N4@TiO2 NTs amplified by signal antibodies–Co3O4 nanoparticle conjugates

Herein, we report a ratiometric photoelectrochemical (PEC) immunosensor coupled with secondary antibodies–Co₃O₄ nanoparticle conjugates (Ab₂–Co₃O₄ NPs) for signal amplification.

Photoelectrochemical Bioanalysis Platform for Cells Monitoring Based on Dual Signal Amplification Using in Situ Generation of Electron Acceptor Coupled with Heterojunction

By using in situ generation of electron acceptor coupled with heterojunction as dual signal amplification, a simple photoelectrochemical (PEC) bioanalysis platform was designed. The synergic effect between the photoelectrochemical (PEC) activities of carbon nitride (C₃N₄) nanosheets and PbS quantum dots (QDs) achieved almost nine-fold photocurrent intensity increment compared with the C₃N₄ alone. After the G-quadruplex/hemin/Pt nanoparticles (NPs) with catalase-like activity toward H₂O₂ were introduced, oxygen was in situ generated and acted as electron donor by improving charge separation efficiency and further enhancing photocurrent response. The dually amplified signal made enough sensitivity for monitoring H₂O₂ released from live cells. The photocathode was prepared by the stepwise assembly of C₃N₄ nanosheets and PbS QDs on indium tin oxide (ITO) electrode, which was characterized by scanning electron microscope. A signal-on protocol was achieved for H₂O₂ detection in vitro due to the relevance of photocurrent on the concentration of H₂O₂. Under the optimized condition, the fabricated PEC bioanalysis platform exhibited a linear range of 10-7000 μM with a detection limit of 1.05 μM at S/N of 3. Besides, the bioanalysis platform displayed good selectivity against other reductive biological species. By using HepG2 cells as a model, a dual signal amplifying PEC bioanalysis platform for monitoring cells was developed. The bioanalysis platform was successfully applied to the detection of H₂O₂ release from live cells, which provided a novel method for cells monitoring and would have prospect in clinical assay.

Quantum-dots-based photoelectrochemical bioanalysis highlighted with recent examples

Photoelectrochemical (PEC) bioanalysis is a newly developed methodology that provides an exquisite route for innovative biomolecular detection. Quantum dots (QDs) are semiconductor nanocrystals with unique photophysical properties that have attracted tremendous attentions among the analytical community. QDs-based PEC bioanalysis comprises an important research hotspot in the field of PEC bioanalysis due to its combined advantages and potentials. Currently, it has ignited increasing interests as demonstrated by increased research papers. This review aims to cover the most recent advances in this field. With the discussion of recent examples of QDs-PEC bioanalysis from the literatures, special emphasis will be placed on work reporting on fundamental advances in the signaling strategies of QDs-based PEC bioanalysis from 2013 to now. Future prospects in this field are also discussed.