Enhanced electrocatalytic performance of an ultrafine AuPt nanoalloy framework embedded in graphene towards epinephrine sensing

Three-dimensional NiO/Co3O4@C composite for high-performance non-enzymatic glucose sensor

In this study, a new enzyme-free glucose sensor was constructed using the transition metal-based composite material. The synthesis of ZIF-67 entailed the addition of NiO with high catalytic performance. Two-dimensional NiO/Co₃O₄@C heterojunctions were obtained via pyrolysis of NiO@ZIF-67 in the air at a temperature of 500 ℃. The enzyme-free glucose sensor Nafion/NiO/Co₃O₄@C/GCE was constructed by modifying NiO/Co₃O₄@C on a glassy carbon electrode (GCE). The performance of the modified electrode was tested via cyclic voltammetry (CV) and a time-current curve (i-t curve). The linear ranges of the modified electrode were 5 -1000 μM and 1.0- 4.0 mM with sensitivities of 690 and 215.4 μA mM^-1 cm^-2, respectively. The detection limit was 2.28 μΜ (S/N = 3). The recoveries were in the range of 98.9-99.7% during the detection of real samples. The prepared sensor Nafion/NiO/Co₃O₄@C/GCE showed excellent electrocatalytic properties with superb reproducibility, stability and anti-interference capability. The sensor has been successfully utilized to determine glucose in real serum samples.

A Non-enzymatic Hydrogen Peroxide Sensor with Enhanced Sensitivity Based on Pt Nanoparticles

The non-enzymatic electrochemical sensing platform for hydrogen peroxide by using Pt-based nanoparticle was investigated. The characterization of PtNiCo-NPs was done by XRD, TEM, HRTEM, EDS, and XPS. A simple drop-casting technique was used to fabricate the nanomaterial on FTO electrode. The amperometric and cyclic voltammetric results illustrated that PtNiCo-NPs on FTO had excellent electrochemical performance over other mono or bimetallic materials. The catalytic performance for H₂O₂ sensing based on PtNiCo-NPs possessed a wide linear range from 5 μM to 16.5 mM with a low detection limit of 0.37 μM and a good sensitivity of 1374.4 μA mM^-1 cm^-2 at a scan rate of 20 mV s^-1 (vs. Ag/AgCl). This work presents a new way to produce a ternary nanomaterial for H₂O₂ sensing with excellent electrochemical performance. In addition, the fabricated nanomaterial showed no interferences for common interfering agents, which indicates the high specificity of the sensor. The PtNiCo-NPs have excellent stability and good reproducibility in real samples.

'Laccase-like' properties of coral-like silver citrate micro-structures for the degradation and determination of phenolic pollutants and adrenaline

Laccases are multicopper containing oxidase enzymes that are highly important in environmental remediation and biotechnology. To date, complex Copper containing materials have been reported as laccase mimic, and the possibility of a non-Cu laccase mimic remained unknown. In this work, we report an exceptionally simple functional laccase mimic based on coral-like silver citrate (AgCit) microstructures. The AgCit was synthesized by a simple precipitation method and was found to possess excellent laccase-like activity capable of oxidizing phenolic substrates and the endocrine hormone adrenaline. Compared to the natural laccase enzyme, our reported laccase-mimic has a higher υ_max and lower K_m value using adrenaline as a substrate. In addition, the AgCit laccase mimic was observed to be stable at extreme pH, higher temperature, and suitable for long-term storage at room temperature. The laccase-like properties of the AgCit nanozyme were successfully applied for the quantification and degradation of various phenolic pollutants and the adrenaline hormone.

Cobalt-doped cerium oxide nanocrystals shelled 1D SnO2 structures for highly sensitive and selective xanthine detection in biofluids

In this study, we prepared a three-dimensional self-supported electrocatalyst based on a thin layer of cerium oxide nanocrystals doped with cobalt heteroatoms (CeO₂-Co) and then uniformly shelled over one-dimensional tin oxide (SnO₂) nanorods supported by carbon cloth substrate. The material was used as a binder-free sensor that could nonenzymatically detect xanthine (XA) with an excellent sensitivity of 3.56 μA μM^-1, wide linear range of 25 nM to 55 µM, low detection limit of 58 nM, and good selectivity. A screen-printed electrode based on the material accurately detected XA in food samples as well. The achievements were resulted from synergistic effects coming from the unique core@shell formation and Co-doping strategy, which efficiently modified electronic structure of the material to expose more electroactive site numbers/types and fast charge transfer, thereby producing intrinsic catalytic properties for XA oxidation. These results suggested that the SnO₂@CeO₂-Co is potential for developing efficient sensor to detect XA with good sensitivity and accuracy in food-quality monitoring.

Nanocomposites based on quasi-networked Au1.5Pt1Co1 ternary alloy nanoparticles and decorated with poly-L-cysteine film for the electrocatalytic application of hydroquinone sensing

A mildly one-pot method is developed for the synthesis of quasi-networked Au_1.5Pt₁Co₁ ternary alloy nanoparticles (TANPs) at room temperature through the co-reduction of AuCl₄^-, PtCl₆^- and Co²⁺ with hydrazine hydrate. Characterizations of XRD, XPS, HRTEM, EDS and SAED successfully reveal the crystal structure, composition, valence and morphology of Au_1.5Pt₁Co₁ TANPs, respectively. The glassy carbon electrode (GCE) modified by Au_1.5Pt₁Co₁ TANPs with good dispersion and multi-density surface defects occupies the optimal electrochemical active surface area (ECSA). After the coated poly-L-cysteine (P-L-Cys) film on the Au_1.5Pt₁Co₁/GCE surface, the morphology, element mapping and surface roughness of the P-L-Cys/Au_1.5Pt₁Co₁/GCE are investigated via FESEM and AFM to verify continuous electrode modification processes. The electrochemical behaviors of the composite electrode for hydroquinone (HQ) are evaluated by cyclic voltammetry (CV) with interfacial properties of adsorption and diffusion. Differential pulse voltammetry (DPV) for HQ electrochemical sensing at 0.10 V (vs. SCE) exhibits two linear response ranges from 0.1 to 30 and 30-200 μM, respectively. A low detection limit (S/N = 3) of 0.045 μM is obtained with a sensitivity of 4.247 μA μM^-1·cm^-2. The resulting P-L-Cys/Au_1.5Pt₁Co₁/GCE also presents ascendant selectivity, repeatability, reproducibility and stability. In addition, the established method is applied to the assessment of the HQ level in real water samples (mineral water, tap water and lake water) with the satisfactory results of spiked recoveries. The sensor may become a promising tool for the trace analysis of the electroactive substance in food or environmental samples.

Surface-coordinated metal-organic framework thin films (SURMOFs) for electrocatalytic applications

The design and development of highly efficient electrocatalysts are very important in energy storage and conversion. As a kind of inorganic organic hybrid material, metal-organic frameworks (MOFs) have been used as electrocatalysts in electrocatalytic reactions due to their structural diversities and fascinating functionalities. Particularly, MOF thin films are coordinated on substrate surfaces by a liquid phase epitaxial (LPE) layer by layer (LBL) growth method (called surface-coordinated MOF thin films, SURMOFs), and recently have been studied in various applications due to their precisely controlled thickness, preferred growth orientation and homogeneous surface. In this review, we will summarize the preparation and electrocatalysis of SURMOFs and their derived thin films (SURMOF-D). The SURMOF based thin films possess diverse topological structures and flexible properties, providing abundant catalytically active sites and fast charge transfer for efficient electrocatalytic performance in the oxygen evolution reaction (OER), oxygen reduction reaction (ORR), hydrogen evolution reaction (HER), carbon dioxide reduction reaction (CRR), supercapacitors, tandem electrocatalysis and so on. The research challenges and problems of SURMOFs for electrocatalytic applications are also discussed at the end of the review.

FTacV study of electroactive immobilized enzyme/free substrate reactions: Enzymatic catalysis of epinephrine by a multicopper oxidase from Thermothelomyces thermophila

In the present work, a kinetic analysis is made concerning the reaction of an electroactive immobilized enzyme with a free substrate, based on a Michaelis-Menten scheme. The proposed kinetic equations are investigated numerically for conditions describing large amplitude fast Fourier transform alternating current voltammetry (FTacV), under different reaction states (transient or steady state for the reaction intermediate as well as quasi or complete reversibility of the electrochemical step). The dependence of two chief observables that occur from the analysis of the results of the method, that is, the maximum of the harmonics and the potential shift of the corresponding dominant peaks, on substrate concentration is presented. The FTacV method is applied experimentally for an immobilized laccase-like multicopper oxidase from Thermothelomyces thermophila, TtLMCO1, and its reaction with epinephrine. From the experimental findings it is shown that the intrinsic characteristics of the system do not lead to the extraction of the desired kinetic data although indications on the relation between the kinetic constants is revealed. Finally, the response of the third harmonic for the first additions of epinephrine at subnanomolarity range can be exploited for the detection of epinephrine at rather low concentrations.

Fluorescence Sensing Platforms for Epinephrine Detection Based on Low Temperature Cofired Ceramics

A novel fluorescence-sensing pathway for epinephrine (EP) detection was investigated. The ceramic-based miniature biosensor was developed through the immobilization of an enzyme (laccase, tyrosinase) on a polymer—poly-(2,6-di([2,2′-bithiophen]-5-yl)-4-(5-hexylthiophen-2-yl)pyridine), based on low temperature cofired ceramics technology (LTCC). The detection procedure was based on the oxidation of the substrate, i.e., in the presence of the enzyme. An alternative enzyme-free system utilized the formation of a colorful complex between Fe²⁺ ions and epinephrine molecules. With the optimized conditions, the analytical performance illustrated high sensitivity and selectivity in a broad linear range with a detection limit of 0.14–2.10 nM. Moreover, the strategy was successfully used for an EP injection test with labeled pharmacological samples.

A Non-Enzymatic Sensor Based on Trimetallic Nanoalloy with Poly (Diallyldimethylammonium Chloride)-Capped Reduced Graphene Oxide for Dynamic Monitoring Hydrogen Peroxide Production by Cancerous Cells

Catching cancer at an early stage is necessary to make it easier to treat and to save people's lives rather than just extending them. Reactive oxygen species (ROS) have sparked a huge interest owing to their vital role in various biological processes, especially in tumorigenesis, thus leading to the potential of ROS as prognostic biomarkers for cancer. Herein, a non-enzymatic biosensor for the dynamic monitoring of intracellular hydrogen peroxide (H2O2), the most important ROS, via an effective electrode composed of poly (diallyldimethylammonium chloride) (PDDA)-capped reduced graphene oxide (RGO) nanosheets with high loading trimetallic AuPtAg nanoalloy, is proposed. The designed biosensor was able to measure H2O2 released from different cancerous cells promptly and precisely owing to the impressive conductivity of RGO and PDDA and the excellent synergistic effect of the ternary alloy in boosting the electrocatalytic activity. Built upon the peroxidase-like activity of the nanoalloy, the developed sensor exhibited distinguished electrochemical performance, resulting in a low detection limit of 1.2 nM and a wide linear range from 0.05 μM to 5.5 mM. Our approach offers a significant contribution toward the further elucidation of the role of ROS in carcinogenesis and the effective screening of cancer at an early stage.

A novel sandwich aptasensor for detecting T-2 toxin based on rGO-TEPA-Au@Pt nanorods with a dual signal amplification strategy

T-2 toxin is a mycotoxin that can cause chronic illnesses, and the detection of T-2 toxin in food is critical for human health. Herein, a novel sandwich aptasensor with a dual signal amplification strategy was developed for the detection of T-2 toxin. Molybdenum disulfide-polyaniline-chitosan-gold nanoparticles (MoS₂-PANI-Chi-Au) were processed to the modified glassy carbon electrode (GCE) and used as the aptasensor platform to expedite the electronics transport and immobilize the amino-terminated capture DNA probe by Au-N bonds. The reduced graphene oxide-tetraethylene pentamine-gold@platinum nanorods (rGO-TEPA-Au@Pt NRs) were first synthesized and immobilized with a signal DNA probe. Once T-2 toxin was added into the biosensing system, the aptamer would trap T-2 toxin to turn the signal off. Next, dissociative aptamer hybridized with the capture DNA probe in GCE and linked simultaneously to the signal DNA probe on rGO-TEPA-Au@Pt NRs with another end sequence of aptamer to turn the signal on. Owing to the efficient catalytic ability of bimetallic Au@Pt nanorods, the signal was perfectly amplified through the catalysis of hydrogen peroxide (H₂O₂) and recorded by chronoamperometry. With the outstanding augment response, the limit of detection reached 1.79 fg mL^-1 (3S_B/m) and a wide linear range from 10 fg mL^-1 to 100 ng mL^-1 was presented. The sensitivity of the aptasensor was 19.88 μA⋅μM^-1⋅cm^-2. Meanwhile, the DNA aptamer-bimetallic nanorod based sensing system presented excellent specificity. The developed aptasensor provides a new platform for T-2 toxin detection with low cost for real sample assays.

Electroanalysis of Catecholamine Drugs using Graphene Modified Electrodes

Background:

Catecholamine drugs are a family of electroactive pharmaceutics, which are widely analyzed through electrochemical methods. However, for low level online determination and monitoring of these compounds, which is very important for clinical and biological studies, modified electrodes having high signal to noise ratios are needed. Numerous materials including nanomaterials have been widely used as electrode modifies for these families during the years. Among them, graphene and its family, due to their remarkable properties in electrochemistry, were extensively used in modification of electrochemical sensors.

Objective:

In this review, working electrodes which have been modified with graphene and its derivatives and applied for electroanalyses of some important catecholamine drugs are considered.

N-doped graphene-carbon nanotube hybrid networks attaching with gold nanoparticles for glucose non-enzymatic sensor

Herein, we successfully developed a novel three dimensional (3D) opened networks based on nitrogen doped graphene‑carbon nanotubes attaching with gold nanoparticles (N-GR-CNTs/AuNPs) to apply for non-enzymatic glucose determination. It was demonstrated that the N-GR-CNTs/AuNPs modified electrode exhibited good behavior for glucose detection with a long linear range of 2 μM to 19.6 mM, high sensitivity of 0.9824 μA·mM^-1·cm^-2, low detection limit of 500 nM, and negligible interference effect. The high performance of the N-GR-CNTs/AuNPs based sensor was assumed due to the outstanding catalytic activity of AuNPs well dispersing on N-GR-CNTs networks, which exhibited as a perfect supporting scaffold due to the enhanced electrical conductivity and large surface area. The obtained results indicated that the N-GR-CNTs/AuNPs hybrid is highly promising for sensitive and selective detection of glucose in sensor application.

Label-Free Electrochemical Detection of Vanillin through Low-Defect Graphene Electrodes Modified with Au Nanoparticles

Graphene is an excellent modifier for the surface modification of electrochemical electrodes due to its exceptional physical properties and, for the development of graphene-based chemical and biosensors, is usually coated on glassy carbon electrodes (GCEs) via drop casting. However, the ease of aggregation and high defect content of reduced graphene oxides degrade the electrical properties. Here, we fabricated low-defect graphene electrodes by catalytically thermal treatment of HPHT diamond substrate, followed by the electrodeposition of Au nanoparticles (AuNPs) with an average size of ≈60 nm on the electrode surface using cyclic voltammetry. The Au nanoparticle-decorated graphene electrodes show a wide linear response range to vanillin from 0.2 to 40 µM with a low limit of detection of 10 nM. This work demonstrates the potential applications of graphene-based hybrid electrodes for highly sensitive chemical detection.

Preparation of Nano Au and Pt Alloy Microspheres Decorated with Reduced Graphene Oxide for Nonenzymatic Hydrogen Peroxide Sensing

The flourish of nanotechnology has brought new vitality to the research and development of electrochemical sensing materials. In this work, we successfully synthesized Nano Au and Pt alloy microspheres decorated with reduced graphene oxide (RGO/nAPAMSs) by a simple, facile, and eco-friendly one-step reduction strategy for the fabrication of highly sensitive nonenzymatic H₂O₂ sensing interfaces. Energy-dispersive X-ray spectroscopy mapping (EDX mapping), energy-dispersive X-ray spectroscopy analysis (EDX), transmission electron microscopy (TEM), Fourier transform infrared spectrum (FT-IR), and X-ray diffraction spectrum (XRD) were employed to characterize RGO/nAPAMSs from a microscopic perspective. The results of cyclic voltammetry and chronoamperometry exhibited excellent electrochemical behaviors toward H₂O₂, with a rapid response time within 5 s, remarkable sensitivity of 1117.0 μA mM^-1 cm^-2, wide linear range of 0.005 to 4.0 mM and lower detection limit of 0.008 μM (S/N = 3), which provide RGO/nAPAMS not only a promising prospect for the quantitative detection of H₂O₂ but also a potential application in other fields of sensors. Moreover, further analysis showed the principles of the superior H₂O₂ sensing performance of RGO/nAPAMSs. This discovery provides a significant contribution to future study in nonenzymatic H₂O₂ sensing based on Nano Pt, Nano Au noble metal electrocatalysts.

Copper and cobalt nanoparticles embedded in naturally derived graphite electrodes for the sensing of the neurotransmitter epinephrine

Cu and Co nanoparticles on naturally derived graphitic carbon as a potential electrode for the electrochemical sensing of the neurotransmitter epinephrine.