1
|
Zhou L, Tang T, Deng D, Wang Y, Pei D. Isolation and Electrochemical Analysis of a Facultative Anaerobic Electrogenic Strain Klebsiella sp. SQ-1. Pol J Microbiol 2024; 73:143-153. [PMID: 38676960 PMCID: PMC11192523 DOI: 10.33073/pjm-2024-013] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/07/2023] [Accepted: 02/26/2024] [Indexed: 04/29/2024] Open
Abstract
Electricigens decompose organic matter and convert stored chemical energy into electrical energy through extracellular electron transfer. They are significant biocatalysts for microbial fuel cells with practical applications in green energy generation, effluent treatment, and bioremediation. A facultative anaerobic electrogenic strain SQ-1 is isolated from sludge in a biotechnology factory. The strain SQ-1 is a close relative of Klebsiella variicola. Multilayered biofilms form on the surface of a carbon electrode after the isolated bacteria are inoculated into a microbial fuel cell device. This strain produces high current densities of 625 μA cm-2 by using acetate as the carbon source in a three-electrode configuration. The electricity generation performance is also analyzed in a dual-chamber microbial fuel cell. It reaches a maximum power density of 560 mW m-2 when the corresponding output voltage is 0.59 V. The facultative strain SQ-1 utilizes hydrous ferric oxide as an electron acceptor to perform extracellular electricigenic respiration in anaerobic conditions. Since facultative strains possess better properties than anaerobic strains, Klebsiella sp. SQ-1 may be a promising exoelectrogenic strain for applications in microbial electrochemistry.
Collapse
Affiliation(s)
- Lei Zhou
- Henan Provincial Engineering Research Center for Development and Application of Characteristic Microorganism Resources, College of Biology and Food, Shangqiu Normal University, Shangqiu, PR China
| | - Tuoxian Tang
- Department of Biological Sciences, Virginia Tech, Blacksburg, USA
| | - Dandan Deng
- Henan Provincial Engineering Research Center for Development and Application of Characteristic Microorganism Resources, College of Biology and Food, Shangqiu Normal University, Shangqiu, PR China
| | - Yayue Wang
- Henan Provincial Engineering Research Center for Development and Application of Characteristic Microorganism Resources, College of Biology and Food, Shangqiu Normal University, Shangqiu, PR China
| | - Dongli Pei
- Henan Provincial Engineering Research Center for Development and Application of Characteristic Microorganism Resources, College of Biology and Food, Shangqiu Normal University, Shangqiu, PR China
| |
Collapse
|
2
|
Jalili P, Ala A, Nazari P, Jalili B, Ganji DD. A comprehensive review of microbial fuel cells considering materials, methods, structures, and microorganisms. Heliyon 2024; 10:e25439. [PMID: 38371992 PMCID: PMC10873675 DOI: 10.1016/j.heliyon.2024.e25439] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/02/2023] [Revised: 01/02/2024] [Accepted: 01/26/2024] [Indexed: 02/20/2024] Open
Abstract
Microbial fuel cells (MFCs) are promising for generating renewable energy from organic matter and efficient wastewater treatment. Ensuring their practical viability requires meticulous optimization and precise design. Among the critical components of MFCs, the membrane separator plays a pivotal role in segregating the anode and cathode chambers. Recent investigations have shed light on the potential benefits of membrane-less MFCs in enhancing power generation. However, it is crucial to recognize that such configurations can adversely impact the electrocatalytic activity of anode microorganisms due to increased substrate and oxygen penetration, leading to decreased coulombic efficiency. Therefore, when selecting a membrane for MFCs, it is essential to consider key factors such as internal resistance, substrate loss, biofouling, and oxygen diffusion. Addressing these considerations carefully allows researchers to advance the performance and efficiency of MFCs, facilitating their practical application in sustainable energy production and wastewater treatment. Accelerated substrate penetration could also lead to cathode clogging and bacterial inactivation, reducing the MFC's efficiency. Overall, the design and optimization of MFCs, including the selection and use of membranes, are vital for their practical application in renewable energy generation and wastewater treatment. Further research is necessary to overcome the challenges of MFCs without a membrane and to develop improved membrane materials for MFCs. This review article aims to compile comprehensive information about all constituents of the microbial fuel cell, providing practical insights for researchers examining various variables in microbial fuel cell research.
Collapse
Affiliation(s)
- Payam Jalili
- Department of Mechanical Engineering, North Tehran Branch, Islamic Azad University, Tehran, Iran
| | - Amirhosein Ala
- Department of Mechanical Engineering, North Tehran Branch, Islamic Azad University, Tehran, Iran
| | - Parham Nazari
- Department of Mechanical Engineering, North Tehran Branch, Islamic Azad University, Tehran, Iran
| | - Bahram Jalili
- Department of Mechanical Engineering, North Tehran Branch, Islamic Azad University, Tehran, Iran
| | - Davood Domiri Ganji
- Department of Mechanical Engineering, Babol Noshirvani University of Technology, P.O. Box 484, Babol, Iran
| |
Collapse
|
3
|
Barakat NAM, Gamal S, Ghouri ZK, Fadali OA, Abdelraheem OH, Hashem M, Moustafa HM. Graphitized mango seed as an effective 3D anode in batch and continuous mode microbial fuel cells for sustainable wastewater treatment and power generation. RSC Adv 2024; 14:3163-3177. [PMID: 38249675 PMCID: PMC10797328 DOI: 10.1039/d3ra05084j] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/27/2023] [Accepted: 12/08/2023] [Indexed: 01/23/2024] Open
Abstract
Herein, we explored the utilization of graphitized mango seeds as 3D-packed anodes in microbial fuel cells (MFCs) powered by sewage wastewater. Mango seeds were graphitized at different temperatures (800 °C, 900 °C, 1000 °C, and 1100 °C) and their effectiveness as anodes was evaluated. Surface morphology analysis indicated that the proposed anode was characterized by layered branches and micro-sized deep holes, facilitating enhanced biofilm formation and microorganism attachment. Maximum power densities achieved in the MFCs utilizing the mango seed-packed anodes graphitized at 1100 °C and 1000 °C were 2170.8 ± 90 and 1350.6 ± 125 mW m-2, respectively. Furthermore, the weight of the graphitized seed anode demonstrated a positive correlation with the generated power density and cell potential. Specifically, MFCs fabricated with 9 g and 6 g anodes achieved maximum power densities of 2170.8 ± 90 and 1800.5 ± 40 mW m-2, respectively. A continuous mode air cathode MFC employing the proposed graphitized mango anode prepared at 1100 °C and operated at a flow rate of 2 L h-1 generated a stable current density of approximately 12 A m-2 after 15 hours of operation, maintaining its stability for 75 hours. Furthermore, a chemical oxygen demand (COD) removal efficiency of 85% was achieved in an assembled continuous mode MFC. Considering that the proposed MFC was driven by sewage wastewater without the addition of external microorganisms, atmospheric oxygen was used as the electron acceptor through an air cathode mode, agricultural biomass waste was employed for the preparation of the anode, and a higher power density was achieved (2170.8 mW m-2) compared to reported values; it is evident that the proposed graphitized mango seed anode exhibits high efficiency for application in MFCs.
Collapse
Affiliation(s)
- Nasser A M Barakat
- Chemical Engineering Department, Faculty of Engineering, Minia University El-Minia 61516 Egypt +20862364420 +20862348005
| | - Shimaa Gamal
- Chemical Engineering Department, Faculty of Engineering, Minia University El-Minia 61516 Egypt +20862364420 +20862348005
| | - Zafar Khan Ghouri
- School of Computing, Engineering and Digital Technologies, Teesside University UK
| | - Olfat A Fadali
- Chemical Engineering Department, Faculty of Engineering, Minia University El-Minia 61516 Egypt +20862364420 +20862348005
| | - Omnia H Abdelraheem
- Sciences Engineering Department, Faculty of Engineering, Beni-Suef University Beni-Suef 62511 Egypt
| | - Mohamed Hashem
- Dental Health Department, College of Applied Medical Sciences, King Saud University Riyadh 11433 Saudi Arabia
| | - Hager M Moustafa
- Chemical Engineering Department, Faculty of Engineering, Minia University El-Minia 61516 Egypt +20862364420 +20862348005
| |
Collapse
|
4
|
Yang C, Zhang J, Zhang B, Liu D, Jia J, Li F, Song H. Engineering Shewanella carassii, a newly isolated exoelectrogen from activated sludge, to enhance methyl orange degradation and bioelectricity harvest. Synth Syst Biotechnol 2022; 7:918-927. [PMID: 35664929 PMCID: PMC9149024 DOI: 10.1016/j.synbio.2022.04.010] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/16/2022] [Revised: 04/26/2022] [Accepted: 04/27/2022] [Indexed: 12/04/2022] Open
Abstract
Electroactive microorganisms (EAMs) play important roles in biogeochemical redox processes and have been of great interest in the fields of energy recovery, waste treatment, and environmental remediation. However, the currently identified EAMs are difficult to be widely used in complex and diverse environments, due to the existence of poor electron transfer capability, weak environmental adaptability, and difficulty with engineering modifications, etc. Therefore, rapid and efficient screening of high performance EAMs from environments is an effective strategy to facilitate applications of microbial fuel cells (MFCs). In this study, to achieve efficient degradation of methyl orange (MO) by MFC and electricity harvest, a more efficient exoelectrogen Shewanella carassii-D5 that belongs to Shewanella spp. was first isolated from activated sludge by WO3 nanocluster probe technique. Physiological properties experiments confirmed that S. carassii-D5 is a Gram-negative strain with rounded colonies and smooth, slightly reddish surface, which could survive in media containing lactate at 30 °C. Moreover, we found that S. carassii-D5 exhibited remarkable MO degradation ability, which could degrade 66% of MO within 72 h, 1.7 times higher than that of Shewanella oneidensis MR-1. Electrochemical measurements showed that MFCs inoculated with S. carassii-D5 could generate a maximum power density of 704.6 mW/m2, which was 5.6 times higher than that of S. oneidensis MR-1. Further investigation of the extracellular electron transfer (EET) mechanism found that S. carassii-D5 strain had high level of c-type cytochromes and strong biofilm formation ability compared with S. oneidensis MR-1, thus facilitating direct EET. Therefore, to enhance indirect electron transfer and MO degradation capacity, a synthetic gene cluster ribADEHC encoding riboflavin synthesis pathway from Bacillus subtilis was heterologously expressed in S. carassii-D5, increasing riboflavin yield from 1.9 to 9.0 mg/g DCW with 1286.3 mW/m2 power density output in lactate fed-MFCs. Furthermore, results showed that the high EET rate endowed a faster degradation efficient of MO from 66% to 86% with a maximum power density of 192.3 mW/m2, which was 1.3 and 1.6 times higher than that of S. carassii-D5, respectively. Our research suggests that screening and engineering high-efficient EAMs from sludge is a feasible strategy in treating organic pollutants.
Collapse
Affiliation(s)
- Chi Yang
- Frontier Science Center for Synthetic Biology and Key Laboratory of Systems Bioengineering (Ministry of Education), Tianjin University, Tianjin, 300072, China
- Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072, China
- Qingdao Institute Ocean Engineering of Tianjin University, Tianjin University, Qingdao, 266200, China
| | - Junqi Zhang
- Frontier Science Center for Synthetic Biology and Key Laboratory of Systems Bioengineering (Ministry of Education), Tianjin University, Tianjin, 300072, China
- Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072, China
| | - Baocai Zhang
- Frontier Science Center for Synthetic Biology and Key Laboratory of Systems Bioengineering (Ministry of Education), Tianjin University, Tianjin, 300072, China
- Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072, China
| | - Dingyuan Liu
- Frontier Science Center for Synthetic Biology and Key Laboratory of Systems Bioengineering (Ministry of Education), Tianjin University, Tianjin, 300072, China
- Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072, China
| | - Jichao Jia
- Frontier Science Center for Synthetic Biology and Key Laboratory of Systems Bioengineering (Ministry of Education), Tianjin University, Tianjin, 300072, China
- Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072, China
| | - Feng Li
- Frontier Science Center for Synthetic Biology and Key Laboratory of Systems Bioengineering (Ministry of Education), Tianjin University, Tianjin, 300072, China
- Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072, China
- Qingdao Institute Ocean Engineering of Tianjin University, Tianjin University, Qingdao, 266200, China
- Corresponding author. Frontier Science Center for Synthetic Biology and Key Laboratory of Systems Bioengineering (Ministry of Education), Tianjin University, Tianjin, 300072, China.
| | - Hao Song
- Frontier Science Center for Synthetic Biology and Key Laboratory of Systems Bioengineering (Ministry of Education), Tianjin University, Tianjin, 300072, China
- Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), School of Chemical Engineering and Technology, Tianjin University, Tianjin, 300072, China
- Qingdao Institute Ocean Engineering of Tianjin University, Tianjin University, Qingdao, 266200, China
- Corresponding author. Frontier Science Center for Synthetic Biology and Key Laboratory of Systems Bioengineering (Ministry of Education), Tianjin University, Tianjin, 300072, China.
| |
Collapse
|
5
|
Saravanan A, Kumar PS, Srinivasan S, Jeevanantham S, Kamalesh R, Karishma S. Sustainable strategy on microbial fuel cell to treat the wastewater for the production of green energy. CHEMOSPHERE 2022; 290:133295. [PMID: 34914952 DOI: 10.1016/j.chemosphere.2021.133295] [Citation(s) in RCA: 8] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/19/2021] [Revised: 12/07/2021] [Accepted: 12/11/2021] [Indexed: 06/14/2023]
Abstract
Microbial fuel cell (MFC) is one of the promising alternative energy systems where the catalytic conversion of chemical energy into electrical energy takes places with the help of microorganisms. The basic configuration of MFC consists of three major components such as electrodes (anode and cathode), catalyst (microorganism) and proton transport/exchange membrane (PEM). MFC classified into four types based on the substrate utilized for the catalytic energy conversion process such as Liquid-phase MFC, Solid-phase MFC, Plant-MFC and Algae-MFC. The core performance of MFC is organic substrate oxidation and electron transfer. Microorganisms and electrodes are the key factors that decide the efficiency of MFC system for electricity generation. Microorganism catalysis degradation of organic matters and assist the electron transfer to anode surface, the conductivity of anode material decides the rate of electron transport to cathode through external circuit where electrons are reduced with hydrogen and form water with oxygen. Not limited to electricity generation, MFC also has diverse applications in different sectors including wastewater treatment, biofuel (biohydrogen) production and used as biosensor for detection of biological oxygen demand (BOD) of wastewater and different contaminants concentration in water. This review explains different types of MFC systems and their core performance towards energy conversion and waste management. Also provides an insight on different factors that significantly affect the MFC performance and different aspects of application of MFC systems in various sectors. The challenges of MFC system design, operations and implementation in pilot scale level and the direction for future research are also described in the present review.
Collapse
Affiliation(s)
- A Saravanan
- Department of Energy and Environmental Engineering, Saveetha School of Engineering, SIMATS, Chennai, 602105, India
| | - P Senthil Kumar
- Department of Chemical Engineering, Sri Sivasubramaniya Nadar College of Engineering, Chennai, 603110, India; Centre of Excellence in Water Research (CEWAR), Sri Sivasubramaniya Nadar College of Engineering, Chennai, 603110, India.
| | - S Srinivasan
- Department of Biomedical Engineering, Saveetha School of Engineering, SIMATS, Chennai, 602105, India
| | - S Jeevanantham
- Department of Biotechnology, Rajalakshmi Engineering College, Chennai, Tamilnadu, 602105, India
| | - R Kamalesh
- Department of Biotechnology, Rajalakshmi Engineering College, Chennai, Tamilnadu, 602105, India
| | - S Karishma
- Department of Biotechnology, Rajalakshmi Engineering College, Chennai, Tamilnadu, 602105, India
| |
Collapse
|
6
|
A systematic study on self-powered microbial fuel cell based BOD biosensors running under different temperatures. Biochem Eng J 2022. [DOI: 10.1016/j.bej.2022.108372] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
|
7
|
Mier AA, Olvera-Vargas H, Mejía-López M, Longoria A, Verea L, Sebastian PJ, Arias DM. A review of recent advances in electrode materials for emerging bioelectrochemical systems: From biofilm-bearing anodes to specialized cathodes. CHEMOSPHERE 2021; 283:131138. [PMID: 34146871 DOI: 10.1016/j.chemosphere.2021.131138] [Citation(s) in RCA: 30] [Impact Index Per Article: 10.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/16/2021] [Revised: 05/27/2021] [Accepted: 06/04/2021] [Indexed: 06/12/2023]
Abstract
Bioelectrochemical systems (BES), mainly microbial fuel cells (MEC) and microbial electrolysis cells (MFC), are unique biosystems that use electroactive bacteria (EAB) to produce electrons in the form of electric energy for different applications. BES have attracted increasing attention as a sustainable, low-cost, and neutral-carbon option for energy production, wastewater treatment, and biosynthesis. Complex interactions between EAB and the electrode materials play a crucial role in system performance and scalability. The electron transfer processes from the EAB to the anode surface or from the cathode surface to the EAB have been the object of numerous investigations in BES, and the development of new materials to maximize energy production and overall performance has been a hot topic in the last years. The present review paper discusses the advances on innovative electrode materials for emerging BES, which include MEC coupled to anaerobic digestion (MEC-AD), Microbial Desalination Cells (MDC), plant-MFC (P-MFC), constructed wetlands-MFC (CW-MFC), and microbial electro-Fenton (BEF). Detailed insights on innovative electrode modification strategies to improve the electrode transfer kinetics on each emerging BES are provided. The effect of materials on microbial population is also discussed in this review. Furthermore, the challenges and opportunities for materials scientists and engineers working in BES are presented at the end of this work aiming at scaling up and industrialization of such versatile systems.
Collapse
Affiliation(s)
- Alicia A Mier
- Bioenergy Lab, Instituto de Energías Renovables, Universidad Nacional Autónoma de México, Priv. Xochicalco S/n, Col. Centro, Temixco, Morelos, CP 62580, Mexico
| | - Hugo Olvera-Vargas
- Bioenergy Lab, Instituto de Energías Renovables, Universidad Nacional Autónoma de México, Priv. Xochicalco S/n, Col. Centro, Temixco, Morelos, CP 62580, Mexico
| | - M Mejía-López
- Bioenergy Lab, Instituto de Energías Renovables, Universidad Nacional Autónoma de México, Priv. Xochicalco S/n, Col. Centro, Temixco, Morelos, CP 62580, Mexico
| | - Adriana Longoria
- Bioenergy Lab, Instituto de Energías Renovables, Universidad Nacional Autónoma de México, Priv. Xochicalco S/n, Col. Centro, Temixco, Morelos, CP 62580, Mexico
| | - Laura Verea
- Instituto de Investigación e Innovación en Energías Renovables, Universidad de Ciencias y Artes de Chiapas, Libramiento Norte Poniente 1150, 29039, Tuxtla Gutiérrez, Chiapas, Mexico
| | - P J Sebastian
- Bioenergy Lab, Instituto de Energías Renovables, Universidad Nacional Autónoma de México, Priv. Xochicalco S/n, Col. Centro, Temixco, Morelos, CP 62580, Mexico
| | - Dulce María Arias
- Bioenergy Lab, Instituto de Energías Renovables, Universidad Nacional Autónoma de México, Priv. Xochicalco S/n, Col. Centro, Temixco, Morelos, CP 62580, Mexico.
| |
Collapse
|
8
|
Cao L, Ma Y, Deng D, Jiang H, Wang J, Liu Y. Electricity production of microbial fuel cells by degrading cellulose coupling with Cr(VI) removal. JOURNAL OF HAZARDOUS MATERIALS 2020; 391:122184. [PMID: 32092674 DOI: 10.1016/j.jhazmat.2020.122184] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/25/2019] [Revised: 01/18/2020] [Accepted: 01/22/2020] [Indexed: 06/10/2023]
Abstract
A facultative exoelectrogen strain Lsc-8 belonging to the Cellulomonas genus with the ability to degrade carboxymethyl cellulose (CMC) coupled with the reduction of Cr(VI), was successfully isolated from rumen content. The maximum output power density of the microbial fuel cells (MFCs) inoculated strain Lsc-8 was 9.56 ± 0.37 mW·m-2 with CMC as the sole carbon source. From the biomass analysis it can be seen that the electricity generation of the MFCs was primarily attributed to the planktonic cells of strain Lsc-8 rather than the biofilm attached on the electrode, which was different from Geobacter sulfurreducens. Especially, during electricity generation of the MFCs using CMC as carbon source in the anode chamber, the Cr(VI) reduction were simultaneously realized. And it is also found that the Cr(VI) reduction ratio by strain Lsc-8 is directly related to the initial Cr(VI) concentration, and it increased with the increase of initial Cr(VI) concentration at first, then started to decrease when the Cr(VI) concentration was above 21 mg ·L-1. Meanwhile, the highest output power density of 3.47 ± 0.28 mW·m-2 was observed coupling with 95.22 ± 2.72 % of Cr(VI) reduction. These data suggested that the strain Lsc-8 could reduce high toxicity Cr(VI) to low toxicity Cr(III) coupled with electricity generation in MFCs with CMC as the carbon source. Our results also suggested that this study will provide a possibility to simultaneously degrade Cr(VI) and generate electricity by using cellulose as the carbon source via MFCs.
Collapse
Affiliation(s)
- Lianbin Cao
- Shaanxi Key Laboratory of Agricultural and Environmental Microbiology, College of Life Sciences, Northwest A&F University, No. 22 Xinong Road, Yangling, Shaanxi Province, 712100, PR China
| | - Yamei Ma
- Shaanxi Key Laboratory of Agricultural and Environmental Microbiology, College of Life Sciences, Northwest A&F University, No. 22 Xinong Road, Yangling, Shaanxi Province, 712100, PR China
| | - Dandan Deng
- College of Biology and Food, Shangqiu Normal University, No. 55 Pingyuan Road, Shangqiu, Henan Province, 476000, PR China
| | - Huichun Jiang
- Shaanxi Key Laboratory of Agricultural and Environmental Microbiology, College of Life Sciences, Northwest A&F University, No. 22 Xinong Road, Yangling, Shaanxi Province, 712100, PR China
| | - Jiaxin Wang
- Shaanxi Key Laboratory of Agricultural and Environmental Microbiology, College of Life Sciences, Northwest A&F University, No. 22 Xinong Road, Yangling, Shaanxi Province, 712100, PR China
| | - Ying Liu
- Shaanxi Key Laboratory of Agricultural and Environmental Microbiology, College of Life Sciences, Northwest A&F University, No. 22 Xinong Road, Yangling, Shaanxi Province, 712100, PR China.
| |
Collapse
|
9
|
Zhang X, Zhang H, Wang C, Chen Q, Zhao Y, Zhou Q, Wu Z. Isolation of two iron-reducing facultative anaerobic electricigens and probing the application performance in eutrophication water. ANN MICROBIOL 2020. [DOI: 10.1186/s13213-020-01568-7] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022] Open
Abstract
Abstract
Purpose
Sediment microbial fuel cell (SMFC) is a promising bioremediation technology in which microbes play an important role. Electricigens as the bio-catalysts have effect on pollution control and electricity generation. It is of great significance to screen the microorganisms with the ability of generating electricity.
Methods
The SMFC anode biofilm was used as microbiological source to study the feasibility of electricigens with iron-reducing property for eutrophication water treatment. Preliminarily, we isolated 20 facultative anaerobic pure bacteria and evaluated their cyclic voltammogram (CV) through the three-electrode system and electrochemical workstation. The power generation performance of strains was verified by air-cathode microbial fuel cells (AC-MFCs) under different single carbon sources.
Result
According to its morphological, physiological, and biochemical characteristics, along with phylogenetic analysis, the two strains (SMFC-7 and SMFC-17) with electrical characteristics were identified as Bacillus cereus. Compared with SMFC-7, SMFC-17 exhibited efficient NH4+-N and NO3−-N removal and PO43−-P accumulation from eutrophic solution with a removal rate of 79.91 ± 6.34% and 81.26 ± 1.11% and accumulation rate of 57.68 ± 4.36%, respectively.
Conclusion
The isolated bacteria SMFC-17 showed a good performance in eutrophic solution, and it might be a useful biocatalyst to enable the industrialized application of SMFC in eutrophic water treatment.
Collapse
|
10
|
Fingerprint characterization of M-EDTA complexes and iron compounds using terahertz time-domain spectroscopy. J Mol Struct 2020. [DOI: 10.1016/j.molstruc.2019.127515] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/29/2023]
|
11
|
Haavisto JM, Lakaniemi AM, Puhakka JA. Storing of exoelectrogenic anolyte for efficient microbial fuel cell recovery. ENVIRONMENTAL TECHNOLOGY 2019; 40:1467-1475. [PMID: 29293411 DOI: 10.1080/09593330.2017.1423395] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/11/2017] [Accepted: 12/27/2017] [Indexed: 06/07/2023]
Abstract
Starting up a microbial fuel cell (MFC) requires often a long-term culture enrichment period, which is a challenge after process upsets. The purpose of this study was to develop low-cost storage for MFC enrichment culture to enable prompt process recovery after upsets. Anolyte of an operating xylose-fed MFC was stored at different temperatures and for different time periods. Storing the anolyte for 1 week or 1 month at +4°C did not significantly affect power production, but the lag time for power production was increased from 2 days to 3 or 5 days, respectively. One month storing at -20°C increased the lag time to 7 days. The average power density in these MFCs varied between 1.2 and 1.7 W/m3. The share of dead cells (measured by live/dead staining) increased with storing time. After 6-month storage, the power production was insignificant. However, xylose removal remained similar in all cultures (99-100%) while volatile fatty acids production varied. The results indicate that fermentative organisms tolerated the long storage better than the exoelectrogens. As storing at +4°C is less energy intensive compared to freezing, anolyte storage at +4°C for a maximum of 1 month is recommended as start-up seed for MFC after process failure to enable efficient process recovery.
Collapse
Affiliation(s)
- Johanna M Haavisto
- a Laboratory of Chemistry and Bioengineering , Tampere University of Technology , Tampere , Finland
| | - Aino-Maija Lakaniemi
- a Laboratory of Chemistry and Bioengineering , Tampere University of Technology , Tampere , Finland
| | - Jaakko A Puhakka
- a Laboratory of Chemistry and Bioengineering , Tampere University of Technology , Tampere , Finland
| |
Collapse
|
12
|
Jiang Y, Song R, Cao L, Su Z, Ma Y, Liu Y. Harvesting energy from cellulose through Geobacter sulfurreducens in Unique ternary culture. Anal Chim Acta 2019; 1050:44-50. [DOI: 10.1016/j.aca.2018.10.059] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/12/2018] [Revised: 09/28/2018] [Accepted: 10/23/2018] [Indexed: 11/24/2022]
|
13
|
Jiang Z, Zhang Y, Liu Z, Ma Y, Kang J, Liu Y. Isolation and characterization of an exoelectrogenic strain CL-1 from soil and electron transfer mechanism by linking electrochemistry and spectroscopy. Electrochim Acta 2018. [DOI: 10.1016/j.electacta.2018.09.153] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/13/2022]
|