Zinc-doping enhanced cadmium sulfide electrochemiluminescence behavior based on Au-Cu alloy nanocrystals quenching for insulin detection

Electrochemiluminescent resonance energy transfer between amino-modified g-C3N4/Bi2MoO6 composite and carboxyl CoS2 nanoboxes for sensitive detection of alpha fetoprotein

This work demonstrates an effective quenching electrochemiluminescent (ECL) immunosensor based on resonance energy transfer for the sensitive detection of alpha fetoprotein (AFP). In this strategy, graphitic carbon nitride (g-C3N4) was coupled with bismuth molybdenum oxide (Bi2MoO6) to form a g-C3N4/Bi2MoO6 nanocomposite as a novel type of ECL immunosensor. The as-synthesized amino-modified g-C3N4/Bi2MoO6 nanocomposite presents strong and stable cathodic ECL activity compared to pristine g-C3N4. One plausible reason is that the synergistic effect between the g-C3N4 and Bi2MoO6 could facilitate charge transfer process and thereby enhancing the separation efficiency of electron-hole pairs. The other functional part of the immunosensor, carboxyl CoS2 nanoboxes with a broad absorption range, was rationally designed and introduced. The evidence that the absorption spectra of carboxyl CoS2 NBs overlap with ECL spectra of g-C3N4/Bi2MoO6 nanocomposite holds accountable for exceptionally weakened ECL signal. This sandwich-type immunosensor was setup based on quenching mechanism concerning amino-modified g-C3N4/Bi2MoO6 as an ECL donor and carboxyl CoS2 NBs as an ECL accepter. The strategy was optimized to achieve a convincible and sensitive detection goal for AFP with a wide quantifiable range of 0.5 pg/mL-10 ng/mL whilst a sufficiently low detection limit of 0.04 pg/mL (S/N = 3). This immunosensor shows great potential for real sample analysis with reasonable recoveries ranging from 95.5 to 99.0 %, demonstrating its high precision for AFP determination.

Novel Ultralow-Potential Electrochemiluminescence Aptasensor for the Highly Sensitive Detection of Zearalenone Using a Resonance Energy Transfer System

An ultralow-potential electrochemiluminescence (ECL) aptasensor has been designed for zearalenone (ZEN) assay based on a resonance energy transfer (RET) system with SnS2 QDs/g-C3N4 as a novel luminophore and CuO/NH2-UiO-66 as a dual-quencher. SnS2 QDs were loaded onto g-C3N4 nanosheets and enhanced the ECL luminescence via strong synergistic effects under an ultralow potential. The UV-vis absorption spectrum of CuO/NH2-UiO-66 exhibits considerable overlap with the ECL emission spectrum of SnS2 QDs/g-C3N4, an important consideration for the RET process. In order to stimulate RET, the ZEN aptamer and complementary DNA are introduced for conjugation between the donor and the acceptor. With the binding interaction between ZEN by its aptamer, CuO/NH2-UiO-66 is removed from the electrode surface, resulting in the inhibition of the RET system and an increase in the ECL signal. Under optimal conditions, the as-prepared aptasensor quantified ZEN from 0.5 μg·mL-1 to 0.1 fg·mL-1 with a low limit of detection of 0.085 fg·mL-1, and it exhibited good stability, excellent specificity, high reproducibility, and desirable practicality. The sensing strategy provides a method for mycotoxins assay to monitor food safety.

An In Situ Investigation of the Protein Corona Formation Kinetics of Single Nanomedicine Carriers by Self-Regulated Electrochemiluminescence Microscopy

Protein coronas are present extensively at the bio-nano interface due to the natural adsorption of proteins onto nanomaterials in biological fluids. Aside from the robust property of nanoparticles, the dynamics of the protein corona shell largely define their chemical identity by altering interface properties. However, the soft coronas are normally complex and rapidly changing. To real-time monitor the entire formation, we report here a self-regulated electrochemiluminescence (ECL) microscopy based on the interaction of the Ru(bpy)3 3+ with the nanoparticle surface. Thus, the heterogeneity of the protein corona is in situ observed in single nanoparticle "cores" before and after loading drugs in nanomedicine carriers. The label-free, optical stable and dynamic ECL microscopy minimize misinterpretations caused by the variation of nanoparticle size and polydispersity. Accordingly, the synergetic actions of proteins and nanoparticles properties are uncovered by chemically engineered protein corona. After comparing the protein corona formation kinetics in different complex systems and different nanomedicine carriers, the universality and accuracy of this technique were well demonstrated via the protein corona formation kinetics curves regulated by competitive adsorption of Ru(bpy)3 3+ and multiple proteins on surface of various carriers. The work is of great significance for studying bio-nano interface in drug delivery and targeted cancer treatment.

Homogeneous Electrochemiluminescence for Highly Sensitive Determination of Demethylase FTO Based on Target-Regulated DNAzyme Cleavage and Host-Guest Interaction

Fat mass and obesity-associated protein (FTO) is the first reported N⁶-methyladenosine (m⁶A) RNA demethylase. The dysregulation of FTO demethylation is strongly associated with various human cancers in a m⁶A-dependent manner. Herein, a homogeneous electrochemiluminescence (ECL) method for the determination of FTO was proposed based on the target-regulated DNAzyme cleavage. Moreover, the ECL signal was highly enhanced by host-guest interaction between β-cyclodextrin (β-CD) and tri-n-propylamine (TPrA). The m⁶A caged DNAzyme 17E-Me acted as a padlock, while the FTO served as the corresponding key. As the key, FTO could specifically remove m⁶A modification, restoring the cleavage activity of DNAzyme 17E. With the assistance of the Zn²⁺ cofactor, the substrate strand was cleaved at a specific site, and the ECL indicator of Ru(phen)₃²⁺ was discharged to produce an ECL signal. On the contrary, 17E-Me was blocked and no cleavage reaction occurred without the key. For the ECL detection, the electrode modification of β-CD@AuNPs concentrated Ru(phen)₃²⁺ species through electrostatic adsorption and gathered TPrA molecules through host-guest interaction with β-CD, which resulted in an intense ECL response. The results demonstrated the ECL intensity linearly correlated with the logarithm of the FTO concentration (from 0.0001 to 100 nM) with a low detection limit (30 fM). The IC₅₀ value for FTO inhibitors rhein and meclofenamic acid were 35.6 μM and 20.3 μM, respectively. The strategy was further validated for FTO detection in MCF-7 cell lysates and Hela cell lysates. This work reveals that this strategy is promising for developing homogeneous ECL method for detection of FTO and screening of the demethylase inhibitors.

Machine learning-assisted Te-CdS@Mn3O4 nano-enzyme induced self-enhanced molecularly imprinted ratiometric electrochemiluminescence sensor with smartphone for portable and visual monitoring of 2,4-D

Here, a novel and portable machine learning-assisted smartphone-based visual molecularly imprinted ratiometric electrochemiluminescence (MIRECL) sensing platform was constructed for highly selective sensitive detection of 2,4-Dichlorophenoxyacetic acid (2,4-D) for the first time. Te doped CdS-coated Mn₃O₄ (Te-CdS@Mn₃O₄) with catalase-like activity served as cathode-emitter, while luminol as anode luminophore accompanied H₂O₂ as co-reactant, and Te-CdS@Mn₃O₄ decorated molecularly imprinted polymers (MIPs) as recognition unit, respectively. Molecular models were constructed and MIP band and binding energies were calculated to elucidate the luminescence mechanism and select the best functional monomers. The peroxidase activity and the large specific surface area of Mn₃O₄ and the electrochemical effect can significantly improve the ECL intensity and analytical sensitivity of Te-CdS@Mn₃O₄. 2,4-D-MIPs were fabricated by in-situ electrochemical polymerization, and the rebinding of 2,4-D inhibits the binding of H₂O₂ to the anode emitter, and with the increase of the cathode impedance, the ECL response of Te-CdS@Mn₃O₄ decreases significantly. However, the blocked reaction of luminol on the anode surface also reduces the ECL response. Thus, a double-reduced MIRECL sensing system was designed and exhibited remarkable performance in sensitivity and selectivity due to the specific recognition of MIPs and the inherent ratio correction effect. Wider linear range in the range of 1 nM-100 μM with a detection limit of 0.63 nM for 2,4-D detection. Interestingly, a portable and visual smartphone-based MIRECL analysis system was established based on the capture of luminescence images by smartphones, classification and recognition by convolutional neural networks, and color analysis by self-developed software. Therefore, the developed MIRECL sensor is suitable for integration with portable devices for intelligent, convenient, and fast detection of 2,4-D in real samples.

A Sandwich-Type Electrochemical Immunosensor for Insulin Detection Based on Au-Adhered Cu5 Zn8 Hollow Porous Carbon Nanocubes and AuNP Deposited Nitrogen-Doped Holey Graphene

Rapid, accurate, and sensitive insulin detection is crucial for managing and treating diabetes. A simple sandwich-type electrochemical immunosensor is engineered using gold nanoparticle (AuNP)-adhered metal-organic framework-derived copper-zinc hollow porous carbon nanocubes (Au@Cu₅ Zn₈ /HPCNC) and AuNP-deposited nitrogen-doped holey graphene (NHG) are used as a dual functional label and sensing platform. The results show that identical morphology and size of Au@Cu₅ Zn₈ /HPCNC enhance the electrocatalytic active sites, conductivity, and surface area to immobilize the detection antibodies (Ab₂ ). In addition, AuNP/NHG has the requisite biocompatibility and electrical conductivity, which facilitates electron transport and increases the surface area of the capture antibody (Ab₁ ). Significantly, Cu₅ Zn₈ /HPCNC exhibits necessary catalytic activity and sensitivity for the electrochemical reduction of H₂ O₂ using (i-t) amperometry and improves the electrochemical response in differential pulse voltammetry. Under optimal conditions, the immunosensor for insulin demonstrates a wide linear range with a low detection limit and viable specificity, stability, and reproducibility. The platform's practicality is evaluated by detecting insulin in human serum samples. All these characteristics indicate that the Cu₅ Zn₈ /HPCNC-based biosensing strategy may be used for the point-of-care assay of diverse biomarkers.

The role of doping strategy in nanoparticle-based electrochemiluminescence biosensing

Doping plays a crucial role in electrochemiluminescence (ECL) due to the followings: (1) Modulation of electronic structure, alteration of the surface state of nanoparticles (NPs), providing effective protection from the surrounding environment, thereby leading to ECL emitters with exceptional properties including tunable spectra, high luminescence efficiency, low excitation potential, and good stability. (2) Employment of doped NPs as promising coreactant alternatives due to the presence of functional groups such as amines induced by NP doping. (3) Serving as novel co-reaction accelerators (CRAs) for ECL through doping induced high catalytic properties. (4) Behaving as excellent carriers to load ECL emitters, recognition elements, and catalysts due to doping-induced larger surface area, higher conductivity and better biocompatibility of NPs. As a consequence, doped NPs have aroused broad interest and found wide applications in various ECL sensing platforms. In this review, the current promising improvements, concepts, and excellent applications of doped NPs for ECL biosensing are addressed. We aim to bring to light the physicochemical characteristics of various doped NPs that endow them with appealing ECL performance, leading to diverse applications in biosensing.

Novel Dual-Signal Electrochemiluminescence Aptasensor Involving the Resonance Energy Transform System for Kanamycin Detection

Based on luminol-capped Pt-tipped Au bimetallic nanorods (NRs) (L-Au-Pt NRs) as the anode emitter and SnS₂ quantum dots (QDs) hybrid Eu metal organic frameworks (MOFs) (SnS₂ QDs@Eu MOFs) as the cathode emitter, a dual-signal electrochemiluminescence (ECL) platform was designed for the ultrasensitive and highly selective detection of kanamycin (KAN). Using a dual-signal output mode, the ratiometric ECL aptasensor largely eliminates false-positives or false-negatives by self-calibration in the KAN assay process. To stimulate the resonance energy transform (RET) system, the KAN aptamer and complementary DNA are introduced for conjugation between the donor and acceptor. With the specific recognition of target KAN by its aptamer, L-Au-Pt NRs-apt partially peels off from the electrode surface. Eventually, the RET system is removed, leading to an increasing cathode signal and a decreasing anode signal. In view of this phenomenon, the ratiometric aptasensor can quantify KAN from 1 pM to 10 nM with a low detection limit of 0.32 pM. This dual-signal ECL aptasensor exhibits great practical potential in environmental monitoring and food safety.

An enzyme-free electrochemiluminescence insulin probe based on the regular attachment of ZnO nanoparticles on a 3-D nickel foam and H2O2 as an efficient co-reactant

In this study, a highly sensitive, fast, and enzyme-free electrochemiluminescence (ECL) probe based on the decoration of zinc oxide nanoparticles on nickel foam is proposed for insulin determination. A silica film was employed as a size adjusting agent for the modification of the nickel foam surface with ZnO nanoparticles (ZnO NPs). The ECL of the ZnO NP/Ni foam was investigated in a natural medium in the presence of hydrogen peroxide (H₂O₂) as an efficient co-reactant. With increasing insulin concentration, a remarkable improvement in ECL signal was observed, which proved the enhancing effect of insulin on the ECL emission. The characterization of the ZnO-NP/Ni-foam electrode was performed via electrochemical impedance spectroscopy, Brunauer-Emmett-Teller (BET) surface area measurement, X-ray diffraction, field emission scanning electron microscopy (FESEM), and energy-dispersive X-ray analysis techniques. The fabricated electrode was applied for the trace analysis of insulin using the ultrasensitive ECL method in a phosphate buffer solution. Under the optimal conditions, the results showed excellent performance during insulin determination with a wide linear range of 3.57 × 10^-15 M to 2.94 × 10^-9 M, a low detection limit of 1.00 × 10^-16 M, and a relative standard deviation of 1.03%. The proposed ECL sensor with excellent reproducibility, long-term stability, and high selectivity was used for insulin determination in real serum samples with acceptable outcomes.

Label-Free and Ultrasensitive Electrochemiluminescent Immunosensor Based on Novel Luminophores of Ce2Sn2O7 Nanocubes

In this research article, a novel and simple label-free electrochemiluminescence (ECL) immunosensor using cerium stannite (Ce₂Sn₂O₇) nanocubes as brand-new ECL emitters has been suggested for the first time. Ce₂Sn₂O₇ nanocubes prepared by a simple hydrothermal method displayed bright ECL emission, promising biocompatibility, low noxiousness, and perfect stability. On comparison of ECL and photoluminescence (PL) spectra, a surface-state mechanism was proposed to be involved in the ECL emission. After aminofunctionalization with 3-aminopropyltriethoxysilane (APTES), Ce₂Sn₂O₇ could be decorated with gold nanoparticles through Au-NH₂ covalent linkage, which yielded Au@Ce₂Sn₂O₇ nanocomposites and further enhanced the ECL emission. To confirm the proposed immunosensor feasibility, carcinoembryonic antigen (CEA) was employed as an exemplary analyte. Based on the abovementioned points, our fabricated immunosensor improved the ECL performance to CEA concentrations in a linear range of 0.001-70 ng/mL with a low limit of detection of 0.53 pg/mL (S/N = 3). With outstanding stability, reproducibility, and specificity, this method is expected to be an innovative one for sensitive analyses of CEA and other biomarkers in real samples.

Colorimetric detection of insulin in human serum using GO/AuNPs/TX-100 nanocomposite

In this study, graphene oxide/gold nanoparticles/Triton X-100 nanocomposites (GO/AuNPs/TX-100) were synthesized using the sonochemical method and their ability in ultrasound-assisted colorimetric detection of insulin was investigated. The synthesized GO/AuNPs/TX-100 nanocomposites were characterized by UV-visible absorption spectroscopy and TEM analysis. The interaction between the nanocomposites and insulin was observed by both naked eye and optical absorption spectroscopy. The GO/AuNPs/TX-100 nanocomposites displayed apparent color changes (red to blue) and absorption spectra changes (decreasing of the band around 528 nm and appearance of a new red-shifted band at 640 nm) in presence of insulin. The interaction mechanism of the nanocomposites and insulin was discussed. It is based on the special structure of insulin, that insulin can be easily self-assemble into the GO/AuNP/TX-100 nanocomposites and can also play the role of a bridge between two different GO/AuNPs/TX-100 nanocomposites by peptide chains. The effective parameters for insulin detection were optimized. The colorimetric method was used for quantification of insulin in the range of 2-300 ng mL^-1 with a detection limit of 0.1 ng mL^-1. Moreover, the relative standard deviation of the method was 3.1 and 2.7% (n = 10) at concentrations of 50 and 200 ng mL^-1, respectively on the same day and 4.8% at a concentration (200.0 ng mL^-1) on five consecutive days. The present method was utilized for insulin assay in human blood serums with satisfactory results.

Biosensors Based on Advanced Sulfur-Containing Nanomaterials

In recent years, sulfur-containing nanomaterials and their derivatives/composites have attracted much attention because of their important role in the field of biosensor, biolabeling, drug delivery and diagnostic imaging technology, which inspires us to compile this review. To focus on the relationships between advanced biomaterials and biosensors, this review describes the applications of various types of sulfur-containing nanomaterials in biosensors. We bring two types of sulfur-containing nanomaterials including metallic sulfide nanomaterials and sulfur-containing quantum dots, to discuss and summarize the possibility and application as biosensors based on the sulfur-containing nanomaterials. Finally, future perspective and challenges of biosensors based on sulfur-containing nanomaterials are briefly rendered.

A highly selective and sensitive detection of insulin with chemiluminescence biosensor based on aptamer and oligonucleotide-AuNPs functionalized nanosilica @ graphene oxide aerogel

A novel, highly selective and sensitive chemiluminescence (CL) biosensor for insulin (INS) detection was proposed based on aptamer and oligonucleotide-gold nanoparticles functionalized nanosilica @ graphene oxide aerogel. Initially, nanosilica functionalized graphene oxide aerogel (SiO₂@GOAG) was successfully prepared and the composite showed rich pore distribution, large specific surface area and good biocompatibility. Insulin aptamer (IGA3) was used as a biorecognition element and oligonucleotide functionalized gold nanoparticles (ssDNA-AuNPs) was used as CL signal amplification materials, which were functionalized on the surface of SiO₂@GOAG. The multi-functionalized composite - ssDNA-AuNPs/IGA3/SiO₂@ GOAG was obtained and used to construct the CL biosensor for insulin detection. When insulin is present in a sample, the insulin will bind to the IGA3, which will result in the release of ssDNA-AuNPs. The released ssDNA-AuNPs would catalyze the luminescence of luminol and H₂O₂. The linear range of the CL biosensor for insulin detection was 7.5 × 10^-12 to 5.0 × 10^-9 moL/L and the detection limit was 1.6 × 10^-12 moL/L (S/N = 3). The selectivity and stability of the CL biosensor were also studied and the results showed that the biosensor exhibited high selectivity and good stability due to the introduction of ssDNA-AuNPs/IGA3/SiO₂@GOAG. The CL biosensor was finally used for recombinant human insulin detection in recombinant human insulin injection and the results were satisfactory.

Recent advances in electrogenerated chemiluminescence biosensing methods for pharmaceuticals

Electrogenerated chemiluminescence (electrochemiluminescence, ECL) generates species at electrode surfaces, which undergoes electron-transfer reactions and forms excited states to emit light. It has become a very powerful analytical technique and has been widely used in such as clinical testing, biowarfare agent detection, and pharmaceutical analysis. This review focuses on the current trends of molecular recognition-based biosensing methods for pharmaceutical analysis since 2010. It introduces a background of ECL and presents the recent ECL developments in ECL immunoassay (ECLIA), immunosensors, enzyme-based biosensors, aptamer-based biosensors, and molecularly imprinted polymers (MIP)-based sensors. At last, the future perspective for these analytical methods is briefly discussed.

A label-free aptasensor for ultrasensitive Pb2+ detection based on electrochemiluminescence resonance energy transfer between carbon nitride nanofibers and Ru(phen)32

A label-free aptasensor was developed for ultrasensitive detection of Pb²⁺ based on electrochemiluminescence resonance energy transfer (ECL-RET) from graphitic carbon nitride nanofibers (CNNFs) to Ru(phen)₃²⁺. The CNNFs synthesized via a facile two-step hydrolysis-electrolysis strategy showed intense and stable ECL signal by taking advantages of amplifying and stabilizing effect of carbon nanotubes and Au nanoparticles. After the specific hybridation between capture DNA and Pb²⁺ specific aptamer, Ru(phen)₃²⁺ could be captured onto CNNFs modified electrode by effectively intercalating into the grooves of double-strand DNA, thus triggering the ECL-RET and leading to highly enhanced ECL intensity. The presence of Pb²⁺ would result in the detachment of Ru(phen)₃²⁺ and then the inhibition of ECL-RET. Then Pb²⁺ concentration could be quantified based on ECL change before and after introduction of Pb²⁺. The target recycling based on exonuclease I (Exo I) mediated digestion of Pb²⁺-aptamer complex was implemented to further improve the sensitivity. These synergistic amplification strategies enabled the aptasensor to be ultrasensitive for Pb²⁺ determination with a detection limit of 0.04 pM. The proposed probe was utilized to analyze environmental samples with satisfactory results.

Precise mono-Cu+ ion doping enhanced electrogenerated chemiluminescence from Cd-In-S supertetrahedral chalcogenide nanoclusters for dopamine detection

Herein, the ECL behaviors of precise mono-Cu+ ion doped Cd-In-S supertetrahedral chalcogenide nanoclusters (Cu@CdInS NCs) were investigated, and the effect of mono-Cu+ ions at the vacancy site of NCs on ECL emission performance was also elucidated. Precise mono-Cu+ ion doping not only induced new ECL emission at 596 nm with enhanced efficiency as high as 21.72% relative to [Ru(bpy)3]2+, but also improved acid tolerance of the ECL performances of NCs. In addition, a simple, fast and label-free dopamine ECL sensor with excellent selectivity was achieved.

Graphitic-phase carbon nitride-based electrochemiluminescence sensing analyses: recent advances and perspectives

This review describes the current trends in synthesis methods, signaling strategies, and sensing applications of g-C₃N₄-based ECL emitters.

A novel sandwich-type photoelectrochemical sensor for SCCA detection based on Ag2S-sensitized BiOI matrix and AucorePdshell nanoflower label for signal amplification

Signal amplification was fulfilled for the interaction between BiOI/Ag₂S and Au_cPd_s.

Quantum dots: from fluorescence to chemiluminescence, bioluminescence, electrochemiluminescence, and electrochemistry

During the past decade, nanotechnology has become one of the major forces driving basic and applied research. As a novel class of inorganic fluorochromes, research into quantum dots (QDs) has become one of the fastest growing fields of nanotechnology today. QDs are made of a semiconductor material with tunable physical dimensions as well as unique optoelectronic properties, and have attracted multidisciplinary research efforts to further their potential bioanalytical applications. Recently, numerous optical properties of QDs, such as narrow emission band peaks, broad absorption spectra, intense signals, and remarkable resistance to photobleaching, have made them biocompatible and sensitive for biological assays. In this review, we give an overview of these exciting materials and describe their potential, especially in biomolecules analysis, including fluorescence detection, chemiluminescence detection, bioluminescence detection, electrochemiluminescence detection, and electrochemical detection. Finally, conclusions are made, including highlighting some critical challenges remaining and a perspective of how this field can be expected to develop in the future.

Inner filter with carbon quantum dots: A selective sensing platform for detection of hematin in human red cells

Hematin plays a crucial role in various physiological functions, and the determination of hematin in complex biological matrixes is a significant but difficult issue. Considering the unique photophysical/photochemical properties of carbon quantum dots (CQDs) prepared with p-aminobenzoic acid (PABA) and ethanol, a new strategy for the design of fluorescent probes for hematin has been achieved. The proposed sensor array is fabricated based on the inner filter effect (IFE) between hematin and CQDs with phenomenon of selective fluorescence quenching of CQDs which results from the strong absorption of the excitation and emission spectrum of CQDs by hematin. The fluorescence quenching of CQDs is closely related to the amount of hematin and there is a good linear relationship over the range of 0.5-10μM with a detection limit of 0.25μM. What's more, the fluorescence assay has been successfully applied for hematin sensing in healthy human red cells showing this sensing assay has a great potential prospect for detection of hematin in the complex matrixes.