Flexible nanohybrid microelectrode based on carbon fiber wrapped by gold nanoparticles decorated nitrogen doped carbon nanotube arrays: In situ electrochemical detection in live cancer cells

Bimetal-organic framework-integrated electrochemical sensor for on-chip detection of H2S and H2O2 in cancer tissues

Studies on the interaction between hydrogen sulfide (H2S) and hydrogen peroxide (H2O2) in redox signaling motivate the development of a sensitive sensing platform for their discriminatory and dynamic detection. Herein, we present a fully integrated microfluidic on-chip electrochemical sensor for the online and simultaneous monitoring of H2S and H2O2 secreted by different biological samples. The sensor utilizes a cicada-wing-like RuCu bimetal-organic framework with uniform nanorods architecture that grows on a flexible carbon fiber microelectrode. Owing to the optimized electronic structural merits and satisfactory electrocatalytic properties, the resultant microelectrode shows remarkable electrochemical sensing performance for sensitive and selective detection of H2S and H2O2 at the same time. The result exhibits low detection limits of 0.5 μM for H2S and 0.1 μM for H2O2, with high sensitivities of 61.93 μA cm-2 mM-1 for H2S, and 75.96 μA cm-2 mM-1 for H2O2. The integration of this biocompatible microelectrode into a custom wireless microfluidic chip enables the construction of a miniature intelligent system for in situ monitoring of H2S and H2O2 released from different living cells to differentiate between cancerous and normal cells. When applied for real-time tracking of H2S and H2O2 secreted by colorectal cancer tissues, it allows the evaluation of their chemotherapeutic efficacy. These findings hold paramount implications for disease diagnosis and therapy.

A microelectrode electrochemical sensing platform based on heteroatoms doped carbon nanotubes arrays with peroxidase-like activity for in-situ detection in live cell

In this work, we developed a new strategy to fabricate a series of transition metallic nanoparticles (NPs) embedded on B, N co-doped carbon nanotubes (CNTs) arrays modified flexible carbon fiber electrodes (M@BNCNTs/CF, M = Co, Fe, Ni) via facile inkjet printing assisted with chemical vapor deposition using Ionic liquid as solvent of printing ink and heteroatom dopants. Furthermore, Pt NPs via impregnation-thermal reduction process was anchored on the surface of Co@BNCNTs/CF (Pt-Co@BNCNTs/CF), which holds enhanced peroxidase-like activity and could be directly used as freestanding electrode to detect H2O2, exhibiting a low detection limit of 0.19 μM with wide linear range (0.5 μM-9.4 mM), and high sensitivity (1679 μA cm-2 mM-1). The excellent sensing performance of Pt-Co@BNCNTs/CF is attributed to the Pt, Co NPs anchored on CNTs with great catalytic activity, and the doping B, N would cause graphitic carbon with more defects to improve its inherent reactivity toward H2O2. Besides, CNTs arrays with high surface area also enlarge the exposure of active sites. Moreover, the Pt-Co@NBCNTs/CF microelectrode has been successfully applied in monitoring H2O2 secreted from human colonic cancer cells and normal colonic epithelial cells, which could offer crucial data for distinguishing various cell types and identifying cancer cells from normal cells. This work opens a new horizon to fabricate flexible miniaturized sensing device for extracellular analysis and offers an extended strategy to fabricate other metallic NPs embedded in heteroatoms doped CNTs functionalized flexible fiber electrode, by choosing diverse metal ions and ILs as inkjet printing precursors.

All-in-one coupling of 3D hybridized nanocarbon microelectrode for portable monitoring of doxycycline hyclate

The simultaneous balance of electrode materials and electrode structures can energize the development of innovative electrochemical sensors. In this work, a 3D nanocarbon layer of hybrid heteroatoms and metal atoms (CN/Fe) with excellent electrical properties and abundant active sites was self-constructed on the surface of a quartz-based nanofiber by high-temperature pyrolysis. Further, the nanofiber tip was selected as the sensing region to develop an electrochemical sensing platform with high sensitivity, miniaturization, and portability. A common broad-spectrum antibiotic (Doxycycline hyclate, DOX) was used as a model to evaluate the designed miniaturized sensing platform, and the stability, reproducibility, and applicability of the microsensor were verified in a variety of real samples, including algal solution, milk, human serum, and cell culture media. The results show that the proposed sensing platform has a detection limit as low as 82 nM in aqueous environments. Furthermore, it is further shown that coupling the design of electrode materials and electrode structures facilitates the development of electrochemical sensors with more practical applications. This concept will open up new avenues for the development of electrochemical sensors that meet many application scenarios.

Carbon Fibers for Bioelectrochemical: Precursors, Bioelectrochemical System, and Biosensors

Abstract

Carbon fibers (CFs) demonstrate a range of excellent properties including (but not limited to) microscale diameter, high hardness, high strength, light weight, high chemical resistance, and high temperature resistance. Therefore, it is necessary to summarize the application market of CFs. CFs with good physical and chemical properties stand out among many materials. It is believed that highly fibrotic CFs will play a crucial role. This review first introduces the precursors of CFs, such as polyacrylonitrile, bitumen, and lignin. Then this review introduces CFs used in BESs, such as electrode materials and modification strategies of MFC, MEC, MDC, and other cells in a large space. Then, CFs in biosensors including enzyme sensor, DNA sensor, immune sensor and implantable sensor are summarized. Finally, we discuss briefly the challenges and research directions of CFs application in BESs, biosensors and more fields.

Highlights

CF is a new-generation reinforced fiber with high hardness and strength.Summary precursors from different sources of CFs and their preparation processes.Introduction of the application and modification methods of CFs in BESs and biosensor.Suggest the challenges in the application of CFs in the field of bio-electrochemistry.Propose the prospective research directions for CFs.

Graphical abstract

Carbon Nanotube Ink Dispersed by Chitin Nanocrystals for Thermoelectric Converter for Self-Powering Multifunctional Wearable Electronics

The screen-printing process of conductive ink can realize simple and large-scale manufacture of micro/nano patterns for producing wearable electronic products. Herein, chitin nanocrystals (ChNCs) are used as a dispersant for the preparation of multiwalled carbon nanotube (MWCNT) ink with high viscosity and uniformity by ultrasound treatment. ChNCs can interact with MWCNT in noncovalent ways, including π-π and hydrophobic interactions. ChNCs/MWCNT (CCNT) ink does not aggregate even after standing for 3 months with a maximum MWCNT concentration of 33 mg mL^-1 and dispersion efficiency of 91.1%. Using CCNT ink, a paper-based thermoelectric generator (TEG) is manufactured by screen-printing technology. With good thermoelectric and strain sensing properties, CCNT coated paper can stably collect human energy at room temperature to realize self-powering. The CCNT coated paper-based TEG can convert thermal voltage signals into musical notes, monitor the changes in human behavior and respiratory rate, and monitor joint movements. Moreover, CCNT coated paper has no cytotoxicity by CCK-8 and live/dead staining. This work puts forward a strategy of green preparation of MWCNT-based ink by adding renewable chitin, which opens up a new way to apply MWCNT-based ink in self-powering wearable multifunctional sensors.

Progress in Probe-Based Sensing Techniques for In Vivo Diagnosis

Advancements in robotic surgery help to improve the endoluminal diagnosis and treatment with minimally invasive or non-invasive intervention in a precise and safe manner. Miniaturized probe-based sensors can be used to obtain information about endoluminal anatomy, and they can be integrated with medical robots to augment the convenience of robotic operations. The tremendous benefit of having this physiological information during the intervention has led to the development of a variety of in vivo sensing technologies over the past decades. In this paper, we review the probe-based sensing techniques for the in vivo physical and biochemical sensing in China in recent years, especially on in vivo force sensing, temperature sensing, optical coherence tomography/photoacoustic/ultrasound imaging, chemical sensing, and biomarker sensing.

Flexible biochemical sensors for point-of-care management of diseases: a review

Health problems have been widely concerned by all mankind. Real-time monitoring of disease-related biomarkers can feedback the physiological status of human body in time, which is very helpful to the diseases management of healthcare. However, conventional non-flexible/rigid biochemical sensors possess low fit and comfort with the human body, hence hindering the accurate and comfortable long-time health monitoring. Flexible and stretchable materials make it possible for sensors to be continuously attached to the human body with good fit, and more precise and higher quality results can be obtained. Thus, tremendous attention has been paid to flexible biochemical sensors in point-of-care (POC) for real-time monitoring the entire disease process. Here, recent progress on flexible biochemical sensors for management of various diseases, focusing on chronic and communicable diseases, is reviewed, and the detection principle and performance of these flexible biochemical sensors are discussed. Finally, some directions and challenges are proposed for further development of flexible biochemical sensors.

Point-of-care electrochemical testing of biomarkers involved in inflammatory and inflammatory-associated medical conditions

Recent years have shown that the diagnosis and monitoring of biomarkers involved in inflammatory-associated medical conditions such as cancer, neurological disorders, viral infections, or daily physical activities offer real benefits in increasing the quality of medical care and patient life quality. In this context, the use of integrated and portable platforms as point-of-care testing devices for biomedical analysis to enable early disease diagnosis and monitoring, which can be successfully used even at the patient's bed, is an emergency nowadays. The development of low-cost, miniaturized, and portable, user-friendly devices that provide an answer in a timely manner, such as electrochemical sensors, is relevant for the elaboration of point-of-care testing devices. This review focuses on the recent progress in bioanalysis of both specific biomarkers and inflammatory-associated biomarkers present in several diseases like neoplasia, severe neurological disorders, viral infections, and usual physical activity and provides an overview of the state of the art over the most recent electrochemical (bio)sensors for the detection of inflammation-related biomarkers. Future perspectives of point-of-care testing to improve healthcare management are also discussed.

Electrochemical Sensors for the Detection of Reactive Oxygen Species in Biological Systems: A Critical Review

Reactive oxygen species (ROS) involving superoxide anion, hydrogen peroxide and hydroxyl radical play important role in human health. ROS are known to be the markers of oxidative stress associated with different pathologies including neurodegenerative and cardiovascular diseases, as well as cancer. Accordingly, ROS level detection in biological systems is an essential problem for biomedical and analytical research. Electrochemical methods seem to have promising prospects in ROS determination due to their high sensitivity, rapidity, and simple equipment. This review demonstrates application of modern electrochemical sensors for ROS detection in biological objects (e.g., cell lines and body fluids) over a decade between 2011 and 2021. Particular attention is paid to sensors materials and various types of modifiers for ROS selective detection. Moreover, the sensors comparative characteristics, their main advantages, disadvantages and their possibilities and limitations are discussed.

Echem methods and electrode types of the current in vivo electrochemical sensing

For a long time, people have been eager to realize continuous real-time online monitoring of biological compounds. Fortunately, in vivo electrochemical biosensor technology has greatly promoted the development of biological compound detection. This article summarizes the existing in vivo electrochemical detection technologies into two categories: microdialysis (MD) and microelectrode (ME). Then we summarized and discussed the electrode surface time, pollution resistance, linearity and the number of instances of simultaneous detection and analysis, the composition and characteristics of the sensor, and finally, we also predicted and prospected the development of electrochemical technology and sensors in vivo.

Electrodes and electrocatalysts for electrochemical hydrogen peroxide sensors: a review of design strategies

H₂O₂ sensing is required in various biological and industrial applications, for which electrochemical sensing is a promising choice among various sensing technologies. Electrodes and electrocatalysts strongly influence the performance of electrochemical H₂O₂ sensors. Significant efforts have been devoted to electrode nanostructural designs and nanomaterial-based electrocatalysts. Here, we review the design strategies for electrodes and electrocatalysts used in electrochemical H₂O₂ sensors. We first summarize electrodes in different structures, including rotation disc electrodes, freestanding electrodes, all-in-one electrodes, and representative commercial H₂O₂ probes. Next, we discuss the design strategies used in recent studies to increase the number of active sites and intrinsic activities of electrocatalysts for H₂O₂ redox reactions, including nanoscale pore structuring, conductive supports, reducing the catalyst size, alloying, doping, and tuning the crystal facets. Finally, we provide our perspectives on the future research directions in creating nanoscale structures and nanomaterials to enable advanced electrochemical H₂O₂ sensors in practical applications.

Recent Advances in Electrochemical Sensing of Hydrogen Peroxide (H2O2) Released from Cancer Cells

Cancer is by far the most common cause of death worldwide. There are more than 200 types of cancer known hitherto depending upon the origin and type. Early diagnosis of cancer provides better disease prognosis and the best chance for a cure. This fact prompts world-leading scientists and clinicians to develop techniques for the early detection of cancer. Thus, less morbidity and lower mortality rates are envisioned. The latest advancements in the diagnosis of cancer utilizing nanotechnology have manifested encouraging results. Cancerous cells are well known for their substantial amounts of hydrogen peroxide (H₂O₂). The common methods for the detection of H₂O₂ include colorimetry, titration, chromatography, spectrophotometry, fluorimetry, and chemiluminescence. These methods commonly lack selectivity, sensitivity, and reproducibility and have prolonged analytical time. New biosensors are reported to circumvent these obstacles. The production of detectable amounts of H₂O₂ by cancerous cells has promoted the use of bio- and electrochemical sensors because of their high sensitivity, selectivity, robustness, and miniaturized point-of-care cancer diagnostics. Thus, this review will emphasize the principles, analytical parameters, advantages, and disadvantages of the latest electrochemical biosensors in the detection of H₂O₂. It will provide a summary of the latest technological advancements of biosensors based on potentiometric, impedimetric, amperometric, and voltammetric H₂O₂ detection. Moreover, it will critically describe the classification of biosensors based on the material, nature, conjugation, and carbon-nanocomposite electrodes for rapid and effective detection of H₂O₂, which can be useful in the early detection of cancerous cells.

Atomistic Simulations of Dopamine Diffusion Dynamics on a Pristine Graphene Surface

Carbon microelectrodes enable in vivo detection of neurotransmitters, and new electrodes aim to optimize the carbon surface. However, atomistic detail on the diffusion and orientation of neurotransmitters near these surfaces is lacking. Here, we employ molecular dynamics simulations to investigate the surface diffusion of dopamine (DA), its oxidation product dopamine-o-quinone (DOQ), and their protonated forms on the pristine basal plane of flat graphene. We find that all DA species rapidly adsorb to the surface and remain adsorbed, even without a holding potential or graphene surface defects. We also find that the diffusivities of the adsorbed and the fully solvated DA are similar and that the protonated species diffuse more slowly on the surface than their corresponding neutral forms, while the oxidized species diffuse more rapidly. Structurally, we find that the underlying graphene lattice has little influence over the molecular adsorbate's lateral position, and the vertical placement of the amine group on dopamine is highly dependent upon its charge. Finally, we find that solvation has a large effect on surface diffusivities. These first results from molecular dynamics simulations of dopamine at the aqueous-graphene interface show that dopamine diffuses rapidly on the surface, even without an applied potential, and provide a basis for future simulations of neurotransmitter structure and dynamics on advanced carbon materials electrodes.

Self-Terminated Electroless Deposition of Surfactant-Free and Monodispersed Pt Nanoparticles on Carbon Fiber Microelectrodes for Sensitive Detection of H2O2 Released from Living Cells

We report a self-terminated electroless deposition method to prepare surfactant-free and monodispersed Pt nanoparticle (NP)-modified carbon fiber microelectrodes (Pt NP/CFEs) for electrochemical detection of hydrogen peroxide (H₂O₂) released from living cells. The surfactant-free and monodispersed Pt NPs with a uniform size of 65 nm are spontaneously deposited on a CFE surface by immersing an exposed carbon fiber (CF) of CFE in the PtCl₄^2- solution, in which an exposed CF can be used as the reducing agent and stabilizer. A self-terminated electroless deposition method is demonstrated, in which the density and size of Pt NPs on a CFE surface do not increase when the reaction time increases from 20 to 60 min. The self-terminated electroless deposition process not only can effectively avoid any manual electrode modification and thus largely minimize person-to-person and electrode-to-electrode deviations but also can avoid the use of any extra reductant or surfactant in the fabrication process. Therefore, Pt NPs/CFEs, with good reproducibility and sensitivity, not only exhibit high electrocatalytic activity toward the oxidation of H₂O₂ but also maintain the spatial resolution of CFEs. Moreover, Pt NPs/CFEs can detect H₂O₂ with a wide linear range of 0.5-80 μM and a low detection limit of 0.17 μM and then can be successfully applied in the monitoring of H₂O₂ released from RAW 264.7 cells. The self-terminated electroless deposition method can also be extended to selectively prepare other metal NP-modified CFEs, such as Au NPs/CFEs or Ag NPs/CFEs, by choosing the metal ions with higher reduction potential as precursors. This work provides a simple, straightforward, and general method for the preparation of small, surfactant-free, and monodispersed metal NP-modified CFEs with high sensitivity, reproducibility, and spatial resolution.

In vitro and in vivo detection of lactate with nanohybrid-functionalized Pt microelectrode facilitating assessment of tumor development

Accelerated glucose uptake and "aerobic glycolysis" of tumor cells generates a high-level lactate in extracellular space and within tumor tissue, which is thought to be a hallmark of tumor and closely correlated with tumor development. Here, we report the development of an enzyme-free electrochemical sensing platform based on a Pt-microneedle electrode functionalized with Au nanoparticles (Au-NPs) decorated polydopamine nanospheres (PDA-NSs), and explore its practical application in in vitro and in vivo detection of lactate in different biological samples. Our results demonstrate that in virtue of the nanostructured merits and high electrocatalytic activity, the resultant nanohybrid-microelectrode exhibits good sensitivity and selectivity to the nonenzymatic electrochemical detection of lactate, with a detection limit of 50 μM, a liner range of 0.375-12 mM, and a sensitivity of 11.25 mA mM^-1 cm^-2, as well as a good anti-interference ability to other active small molecules. The platform quantifies lactate in complex bio-fluids, including cancerous and non-cancerous cell culture media, as well as serum samples, with detecting time 7.5-fold faster than does a clinically-used approach. Moreover, owing to miniaturized size and satisfactory electrochemical performance, the sensor achieves in vivo recording of lactate-related characteristic voltammetric signals within a living tumor, which are positively correlated with tumor burden and growth. Therefore, the platform cannot only be employed for cancer metabolic investigation, but also potentially for clinical assessment of tumor progression, and even clinical diagnosis of other lactate metabolism disorders.

Activable Multi-Modal Nanoprobes for Imaging Diagnosis and Therapy of Tumors

Malignant tumors have become one of the major causes of human death, but there remains a lack of effective methods for tiny tumor diagnosis, metastasis warning, clinical efficacy prediction, and effective treatment. In this context, localizing tiny tumors via imaging and non-invasively extracting molecular information related to tumor proliferation, invasion, metastasis, and drug resistance from the tumor microenvironment have become the most fundamental tasks faced by cancer researchers. Tumor-associated microenvironmental physiological parameters, such as hypoxia, acidic extracellular pH, protease, reducing conditions, and so forth, have much to do with prognostic indicators for cancer progression, and impact therapeutic administrations. By combining with various novel nanoparticle-based activatable probes, molecular imaging technologies can provide a feasible approach to visualize tumor-associated microenvironment parameters noninvasively and realize accurate treatment of tumors. This review focuses on the recent achievements in the design of “smart” nanomedicine responding to the tumor microenvironment-related features and highlights state-of- the-art technology in tumor imaging diagnosis and therapy.

Low potential detection of antiprotozoal drug metronidazole with aid of novel dysprosium vanadate incorporated oxidized carbon nanofiber modified disposable screen-printed electrode

In this work, we designed tetragonal nanogravel structured dysprosium vanadate Dy(VO₄) nanoparticles unified with oxidized carbon nanofiber (f-CNF) denoted as Dy(VO₄)/f-CNF nanocomposite for the low potential determination of antiprotozoal drug metronidazole (MEZ). The physicochemical properties of novel Dy(VO₄)/f-CNF nanocomposite were analyzed through microscopic and spectroscopic techniques and obtained results express nanocomposite formed with desired surface morphology, crystalline phase, atomic vibrational modes, and preferred elemental compositions. The electrocatalytic activity of Dy(VO₄)/f-CNF nanocomposite was examined with a disposable screen-printed electrode (SPCE) via cyclic voltammetry (CV) and linear sweep voltammetry technique (LSV) with a conventional three-electrode system. Dy(VO₄)/f-CNF/SPCE delivers a higher active surface area recommends superior electrocatalytic activity which is favorable for the MEZ sensor. Electrocatalytic reduction of MEZ occurred with lower reduction potential (-0.55 V) with dynamic linear range (1.5-1036.9 µM), lower detection limit (6 nm), LOQ (0.022 µM), and higher sensitivity (1.12 μA μM^-1 cm²). The anti-interference studies retain its actual current without any shift in cathodic potential. Besides, the practical feasibility outcomes with higher cathodic current with the higher recovery rate and RSD in human blood sample, urine sample, and lake water as a real samples. Thus, Dy(VO₄)/f-CNF nanocomposite modified SPCE considers being a potential candidate for the MEZ sensor.

3D nitrogen-doped carbon nanofoam arrays embedded with PdCu alloy nanoparticles: Assembling on flexible microelectrode for electrochemical detection in cancer cells

In this work, we developed a novel and facile strategy for the synthesis of a highly active and stable electrocatalyst based on PdCu alloy nanoparticles (PdCu-ANPs) embedded in 3D nitrogen-doped carbon (NC) nanofoam arrays (NFAs), which were assembled on flexible carbon fiber (CF) microelectrode for in situ sensitive electrochemical detection of biomarker H₂O₂ in cancer cells. Our results showed that NC-NFAs support possessed a unique hierarchically porous architecture by integrating the macrospores in arrays scaffold within mesopores in individual NC nanofoam, which offered exceptionally large surface area for embedding high-density PdCu-ANPs in it as well as facilitated the mass transfer and molecular diffusion during the electrochemical reaction. Taking the advantages of the unique structural merit of NC-NFAs support and excellent electrocatalyitc properties of PdCu-ANPs that embedded in it, the resultant PdCu-ANPs/NC-NFAs modified CF microelectrode exhibited good electrochemical sensing performances towards H₂O₂ including a wide linear range from 2.0 μM to 3.44 mM, a low detection limit of 500 nM, as well as good reproducibility, stability and anti-interference ability. When used in real-time in situ tracking H₂O₂ secreted from different types of human colorectal cancer cells, i.e., HCT116, HT29, SW48 and LoVo, it can distinguish the types of cancer cells by measuring the number of extracellular H₂O₂ molecules released per cell, which demonstrates its great promise in cancer diagnose and management.

Recent Advances in Electrochemical Sensors for the Detection of Biomolecules and Whole Cells

Electrochemical sensors are considered an auspicious tool to detect biomolecules (e.g., DNA, proteins, and lipids), which are valuable sources for the early diagnosis of diseases and disorders. Advances in electrochemical sensing platforms have enabled the development of a new type of biosensor, enabling label-free, non-destructive detection of viability, function, and the genetic signature of whole cells. Numerous studies have attempted to enhance both the sensitivity and selectivity of electrochemical sensors, which are the most critical parameters for assessing sensor performance. Various nanomaterials, including metal nanoparticles, carbon nanotubes, graphene and its derivatives, and metal oxide nanoparticles, have been used to improve the electrical conductivity and electrocatalytic properties of working electrodes, increasing sensor sensitivity. Further modifications have been implemented to advance sensor platform selectivity and biocompatibility using biomaterials such as antibodies, aptamers, extracellular matrix (ECM) proteins, and peptide composites. This paper summarizes recent electrochemical sensors designed to detect target biomolecules and animal cells (cancer cells and stem cells). We hope that this review will inspire researchers to increase their efforts to accelerate biosensor progress-enabling a prosperous future in regenerative medicine and the biomedical industry.

Fabrication and Specific Functionalisation of Carbon Fibers for Advanced Flexible Biosensors

This review aims at offering an up-to-date comprehensive summary of carbon fibers (CFs)-based composites, with the emphasis on smart assembly and purpose-driven specific functionalization for their critical applications associated with flexible sensors. We first give a brief introduction to CFs as a versatile building block for preparation of mutil-fountional materials and the current status of research studies on CFs. This is followed by addressing some crucial methods of preparation of CFs. We then summarize multiple possibilities of functionalising CFs, an evaluation of some key applications of CFs in the areas of flexible biosensors was also carried out.

Applications of advanced materials in bio-sensing in live cells: Methods and applications

A wide variety of species, such as different ions, reactive oxygen species, and biomolecules play critical roles in many cell functions. These species are responsible for a range of cellular functions such as signaling, and disturbed levels could be involved in many diseases, such as diabetes, cancer, neurodegeneration etc. Thus, sensitive and specific detection methods for these biomarkers could be helpful for early disease detection and mechanistic investigations. New ultrasensitive sensors for detection of markers within living cells are a growing field of research. The present review provides updates in live cell-based biosensing, which have been published within the last decade. These sensors are mainly based on carbon, gold and other metals, and their physicochemical advantages and limitations are discussed. Advanced materials can be incorporated into probes for the detection of various analytes in living cells. The sensitivity is strongly influenced by the intrinsic properties of the nanomaterials as well their shape and size. The mechanisms of action and future challenges in the developments of new methods for live cell based biosensing are discussed.

Gold/SH-functionalized nanographene oxide/polyamidamine/poly(ethylene glycol) nanocomposites for enhanced non-enzymatic hydrogen peroxide detection

Hydrogen peroxide (H₂O₂) is an important mediator in biological medicine, disease diagnosis and environmental analyses and therefore it is essential to develop a detection approach for H₂O₂ in physical environments. Herein, we designed and prepared a series of AuNP-containing nanocomposites (AuNPs@NGO-PEG, AuNPs@G1-PAMAM-NGO-PEG and AuNPs@G3-PAMAM-NGO-PEG) for enhanced non-enzymatic H₂O₂ detection. We firstly demonstrated functionalized nanographene oxide (NGO) based materials, which combined advantages of biocompatible poly(ethylene glycol) (PEG), hyperbranched polyamidamine (PAMAM) dendrimer and thiol active site, as compatible platforms. Gold nanoparticles (AuNPs) were then aptly in situ grown on these functionalized NGO based materials via the reduction of HAuCl₄ under mild conditions, i.e. AuNPs@NGO-PEG, AuNPs@G1-PAMAM-NGO-PEG and AuNPs@G3-PAMAM-NGO-PEG nanocomposites, which possess stable and uniform AuNPs standing on the functionalized NGO sheets. For H₂O₂ detection, these nanocomposites were cast on a glassy carbon electrode (GCE) conveniently, i.e. GCE/AuNPs@NGO-PEG, GCE/AuNPs@G1-PAMAM-NGO-PEG and GCE/AuNPs@G3-PAMAM-NGO-PEG. It is evident that these GCEs could be applied as efficient non-enzymatic H₂O₂ detectors resulting from the corresponding cyclic voltammetric curves and typical ready-state amperometric curves. GCE/AuNPs@G1-PAMAM-NGO-PEG exhibited the fastest electron transfer rate among these modified GCEs. We envisage that these GCEs could provide efficient sensors for H₂O₂ detection and a new strategy for sensor design.

Hierarchical Core-Shell Structure of 2D VS2@VC@N-Doped Carbon Sheets Decorated by Ultrafine Pd Nanoparticles: Assembled in a 3D Rosette-like Array on Carbon Fiber Microelectrode for Electrochemical Sensing

The development of two-dimensional (2D) nanohybrid materials with heterogeneous components in nanoscale and three-dimensional (3D) well-ordered assembly in microscale has been regarded as an effective way to improve their overall performances by the synergistic coupling of the optimized structure and composition. In this work, we reported the design and synthesis of a new type of hierarchically core-shell structure of 2D VS₂@VC@N-doped carbon (NC) sheets decorated by ultrafine Pd nanoparticles (PdNPs), which were vertically grown on carbon fiber (CF) and assembled into a unique 3D rosette-like array. The resultant VS₂@VC@NC-PdNPs modified CF microelectrode integrated the structural and electrochemical properties of the heterogeneous hybridization of core-shell VS₂@VC@NC-PdNPs sheets with a unique rosette-like array structure, and gave rise to a significant improvement in terms of electron transfer ability, electrocatalytic activity, stability, and biocompatibility. Under the optimized conditions, the VS₂@VC@NC-PdNPs modified CF microelectrode demonstrated excellent electrochemical sensing performance towards biomarker hydrogen peroxide (H₂O₂) including a high sensitivity of 152.7 μA cm^-2 mM^-1, a low detection limit of 50 nM (a signal-to-noise ratio of 3:1), as well as good reproducibility and anti-interference ability, which could be used for the real-time in situ electrochemical detection of H₂O₂ in live cancer cells and cancer tissue. The remarkable performances of the proposed nanohybrid microelectrode will have a profound impact on the design of diverse 2D layered materials as a promising candidate for electrochemical biosensing applications.

Designing electrochemical interfaces based on nanohybrids of avidin functionalized-carbon nanotubes and ruthenium nanoparticles as peroxidase-like nanozyme with supramolecular recognition properties for site-specific anchoring of biotinylated residues

We are reporting an original supramolecular architecture based on a rationally designed new nanohybrid with enhanced peroxidase-like activity and site-specific biorecognition properties using avidin-functionalized multi-walled carbon nanotubes (MWCNTs-Av) and Ru nanoparticles (RuNPs). The nanohybrid-electrochemical interface was obtained by drop-coating of MWCNTs-Av dispersion at glassy carbon electrodes (GCE) followed by solvent evaporation and further electrodeposition of RuNPs (50 ppm RuCl₂ for 15 s at -0.600 V). The simultaneous presence of MWCNTs and RuNPs produces a synergic effect on the non-enzymatic catatalytic reduction of H₂O₂ and allows the quantification of H₂O₂ in a wide linear range (from 5.0 × 10^-7 M to 1.75 × 10^-3 M) with a low limit of detection (65 nM). The avidin residues present in MWCNTs-Av/RuNPs hybrid nanomaterial allowed the anchoring by bioaffinity of biotinylated glucose oxidase (biot-GOx) as proof-of-concept of the analytical application of MWCNTs-Av platform for biosensors development. The resulting nanoarchitecture behaves as a bienzymatic-like glucose biosensor with a competitive analytical performance: linear range between 2.0 × 10^-5 M and 1.23 × 10^-3 M, sensitivity of (0.343 ± 0.002) μA mM^-1 or (2.60 ± 0.02) μA mM^-1 cm^-2, detection limit of 3.3 μM, and reproducibility of 5.2% obtained with five different GCE/MWCNTs-Av/RuNPs/biot-GOx bioplatforms prepared the same day using the same MWCNTs-Av dispersion, and 9.1% obtained with nine biosensors prepared in different days with nine different MWCNTs-Av dispersions. The average concentrations of glucose in Gatorade®, Red bull® and Pepsi® with the biosensor demonstrated excellent agreement with those reported in the commercial beverages.

An OFF-ON detection method for copper(ii) ions using a AgAu-NG nanocomposite modified electrode

An OFF-ON detection method for Cu²⁺ was developed at the AgAu bimetallic nanoparticle decorated nitrogen-doped graphene (AgAu-NG) nanocomposite modified electrode. The measurement was based on the copper-catalyzed oxidation of cysteamine (Cys) to regulate the oxidation peak current of Ag. In the absence of Cu²⁺, Cys can bind to the surface of AgAu-NG via the Ag-S or Au-S bond, thus leading to an obvious decrease of the oxidation peak current of Ag. However, in the presence of Cu²⁺, Cu²⁺ can greatly catalyze the oxidation of Cys by dissolved O₂ to form cystamine, which would fall off the surface of AgAu-NG nanocomposites, leading to the partial recovery of the oxidation peak current of Ag. With the increase in the concentration of Cu²⁺, the oxidation peak current of Ag in the presence of Cys increases accordingly. So, the concentration of Cu²⁺ can be measured. By using the optimum conditions, this method can detect Cu²⁺ concentrations down to 0.3 nM (S/N = 3) with a linear response range of 1 nM-1 mM. Furthermore, this method was applied to determine Cu²⁺ concentrations in river water samples and showed excellent analytical performance.

Study on physisorption between phycocyanin and gold nanoparticles

Interactions between nanoparticles (NPs) and biomolecules, especially proteins, have attracted increasing attention. Photoresponsive proteins have shown high potential for optogenetic research. The combination between optogenetics and nanotechnology will bring a new biological era in which photoresponsive proteins will inevitably encounter NPs, therefore their interactions will be a key point to investigate. Here, we have systematically studied the interactions between a photoresponsive protein (called phycocyanin, PC) and a typical kind of amphiphilic polymer-coated gold NPs (AP-AuNPs) using fluorescence quenching methods. The results showed that the binding constant between PCs and AP-AuNPs is 4.427 × 10⁶  M^-1 with a positive cooperativity, and the robust affinity was hydrophobic interaction driven mortise-tenon conjugation, which could even resist gel electrophoresis. These results could also shed light on potential designs for building up artificial protein-NP light-harvesting systems.

Fabrication of hexahedral Au-Pd/graphene nanocomposites biosensor and its application in cancer cell H2O2 detection

Currently, real time monitoring of chemical substances in vivo and in vitro has gained enormous attraction, and many researches reports have been focused on the design and construction of high-performance biosensor devices. In this work, a high-performance sensor was constructed by taking advantage of the excellent electrochemical activity and high-index facets of Au-Pd nanocubes and the large surface of rGO. Glassy carbon electrodes (GCEs) were modified by both Au-Pd nanocubes and rGO nanocomposites via physical adsorption. Transmission electron microscopy (TEM) and X-ray diffraction (XRD) were utilized to characterize and identify this unique nanostructure. These three-dimensional nanocomposites possess a high electroactive surface area and an excellent electrical conductivity, which resulted in favorable electroreduction activity toward H₂O₂ with a lower detection limit of 4 nM, a wide linear range from 0.005 μM to 3.5 mM and a rapid response time. Furthermore, the proposed sensor exhibited desirable performance in the detection of endogenous H₂O₂ in human serum samples and real-time monitoring of H₂O₂ released from living breast cancer cell lines. In summary, this work not only provides a potential method to construct a physiological and pathological H₂O₂ biosensor but also makes a valuable contribution to the early diagnosis of different cancers.

Bimetallic ZrHf-based metal-organic framework embedded with carbon dots: Ultra-sensitive platform for early diagnosis of HER2 and HER2-overexpressed living cancer cells

We report here a new bimetallic ZrHf metal-organic framework (ZrHf-MOF) embedded with abundant carbon dots (CDs) (denoted as CDs@ZrHf-MOF), which exhibits strong fluorescence and rich-amino-functionalization. The CDs@ZrHf-MOF can be applied as the scaffold for anchoring aptamer strands to determine human epidermal growth factor receptor-2 (HER2) and living HER2-overexpressed MCF-7 cells. The basic characterizations reveal that the CDs are embedded within the interior cavities of ZrHf-MOF without varying the nanostructure, leading to good biocompatibility, strong fluorescence, and high electrochemical activity of CDs@ZrHf-MOF. As compared with the pristine ZrHf-MOF, the CDs@ZrHf-MOF-based electrochemical aptasensor displays better sensing performances toward both HER-2 and MCF-7 cells, giving an extremely low detection limit of 19 fg mL^-1 (HER2 concentration range: 0.001-10 ng mL^-1) and 23 cell mL^-1 (cell concentration range: 1 × 10²~1 × 10⁵ cell mL^-1), with good selectivity, stability, reproducibility, and acceptable applicability. The proposed strategy for developing CDs@ZrHf-MOF-based aptasensor is promising for the early and sensitive detection of cancer markers and living cancer cells.

Recent advances in the use of carbon nanotubes as smart biomaterials

Carbon nanotubes (CNTs) have remarkable mechanical, thermal, electronic, and biological properties due to their particular atomic structure made of graphene sheets that are rolled into cylindrical tubes. Due to their outstanding properties, CNTs have been used in several technological fields. Currently, the most prominent research area of CNTs focuses on biomedical applications, using these materials to produce hybrid biosensors, drug delivery systems, and high performance composites for implants. Although a great number of research studies have already shown the advantages of CNT-based biomedical devices, their clinical use for in vivo application has not been consummated. Concerns related to their toxicity, biosafety, and biodegradation still remain. The effect of CNTs on the human body and the ecosystem is not well established, especially due to the lack of standardization of toxicological tests, which generate contradictions in the results. CNTs' toxicity must be clarified to enable the medical use of these exceptional materials in the near future. In this review, we summarize recent advances in developing biosensors, drug delivery systems, and implants using CNTs as smart biomaterials to identify pathogens, load/deliver drugs and enhance the mechanical and antimicrobial performance of implants.

Hierarchical multi-layered molybdenum carbide encapsulated oxidized carbon nanofiber for selective electrochemical detection of antimicrobial agents: inter-connected path in multi-layered structure for efficient electron transfer

The schematic illustration for electrochemical sensing of MTZ at Mo₂/C/f-CNF modified GCE.

Applications of Gold Nanoparticles in Non-Optical Biosensors

Due to their unique properties, such as good biocompatibility, excellent conductivity, effective catalysis, high density, and high surface-to-volume ratio, gold nanoparticles (AuNPs) are widely used in the field of bioassay. Mainly, AuNPs used in optical biosensors have been described in some reviews. In this review, we highlight recent advances in AuNP-based non-optical bioassays, including piezoelectric biosensor, electrochemical biosensor, and inductively coupled plasma mass spectrometry (ICP-MS) bio-detection. Some representative examples are presented to illustrate the effect of AuNPs in non-optical bioassay and the mechanisms of AuNPs in improving detection performances are described. Finally, the review summarizes the future prospects of AuNPs in non-optical biosensors.

Trimetallic AuPtPd nanocomposites platform on graphene: Applied to electrochemical detection and breast cancer diagnosis

Recently, great efforts have been made to use biosensors for the early diagnosis of cancer. Specifically, using a biomarker to detect H₂O₂ in physiological conditions is of great significance for understanding the signal transduction pathways and achieving early cancer diagnosis. In this work, we report an innovative H₂O₂ sensor that was fabricated by trimetallic AuPtPd nanocomposites platform on reduced graphene oxide (rGO) nanosheets with the modification of the rGO and trimetallic AuPtPd nanoparticles on a glassy carbon electrode (GCE) by physical adsorption. Transmission electron microscopy (TEM) and X-ray diffraction (XRD) were utilized to characterize and identify these unique nanocomposites. In addition, the electrochemical properties of the proposed sensor were evaluated by cyclic voltammetry and chronoamperometry. Electrochemical research has demonstrated that the AuPtPd/rGO-modified GCE showed excellent electrocatalytic activity towards the reduction of H₂O₂, including a wider linear range from 0.005 μM to 6.5 mM, a low detection limit of 2 nM, good selectivity and acceptable repeatability. Moreover, the sensor can monitor the release of H₂O₂ release from living cancer cells. Therefore, this study not only improves simplicity, sensitivity and quantitatively for detection H₂O₂ in cells at nM level but also provides a foundation for the biological and biomedical applications such as the early diagnosis of cancer.

Dual nanoenzyme modified microelectrode based on carbon fiber coated with AuPd alloy nanoparticles decorated graphene quantum dots assembly for electrochemical detection in clinic cancer samples

The development of high-efficient technologies for cancer biomarkers detection has attracted tremendous research effort for its great clinic significance. In this work, we designed a new type of flexible and robust nanohybrid microelectrode by modifying carbon fiber with dual nanoenzyme, i.e., AuPd alloy nanoparticles (AuPd-ANPs) decorated graphene quantum dots (GQDs) assembly, and explored its practical application in electrochemical sensing system for sensitive detection of cancer biomarker hydrogen peroxide (H₂O₂) in human breast cancer cells and tissue. For the preparation of dual nanoenzyme modified microelectrode, ionic liquid was used as the electrolyte for the effective electrodeposition of GQDs on carbon fiber substrate to form a close-packed assembly under a very negative potential, then the highly dense AuPd-ANPs were uniformly decorated on GQDs assembly by electrodeposition. In virtue of the structural merits and synergistic contribution of dual nanoenzyme in enhancing the electrocatalytic activity to H₂O₂, the resultant nanohybrid microelectrode exhibited good sensing performances for electrochemical detection of H₂O₂, including a high sensitivity of 371 μA cm^-2 mM^-1, a wide linear range from 1.0 μM to 18.44 mM, a low detection limit of 500 nM (a signal-to-noise ratio of 3:1), as well as good selectivity and biocompatibility, which could be used for real-time tracking H₂O₂ released from different types of human breast cells and in situ sensitive detection of H₂O₂ in clinical breast cancer tissue.