Triple-helix molecular switch-based aptasensors and DNA sensors

A novel and sensitive electrochemical aptasensor for sulfadimethoxine detection based on the triple helix/exonuclease I-assisted double-amplification strategy

In this paper, a novel and sensitive electrochemical aptasensor for sulfadimethoxine (SDM) detection has been designed based on the triple helix structure/exonuclease I (Exo I)-assisted double signal amplification strategy. The aptamer probe (Apt) hybridizes with the signal transduction probe (STP) on the electrode to form a rigid double-stranded DNA (dsDNA) structure, so that the STP remains upright and methylene blue (MB) on the STP is far away from the electrode surface, resulting in a delicate current signal. In the presence of SDM, the SDM and Apt combine into a complex, leading to the transfer of the Apt and the exposure of the STP. Meanwhile, the added Exo I can digest the Apt to realize the cyclic amplification of SDM. After the addition of the signal probe (SP), a triple helix structure between the SP and STP is formed under acidic conditions, and MB on the STP and SP collide with the electrode surface to generate a strong electrochemical signal. The proposed aptasensor combines the features of the triple helix structure and Exo I to achieve double signal amplification for the sensitive detection of SDM with a wide linear range of 0.05-1000 ng mL-1 and a low detection limit of 0.02 ng mL-1. Furthermore, it has been successfully used to detect SDM in milk and lake water samples.

Ratiometric fluorescent and electrochemiluminescent dual modal assay for detection of 2,6-pyridinedicarboxylic acid as an anthrax biomarker

2,6-pyridinedicarboxylic acid (DPA) is an excellent biomarker of Bacillus anthracis (B. anthracis). The sensitive detection of DPA, especially through visual point-of-care testing, was significant for accurate and rapid diagnosis of anthrax to timely prevent anthrax disease or biological terrorist attack. Herein, a ratiometric fluorescent (R-FL) and electrochemiluminescent (ECL) dual-mode detection platform with a lanthanide ion-based metal-organic framework (Ln-MOF, i.e., M/Y-X: M = Eu, Y = Tb, and X = 4,4',4″-s-triazine-1,3,5-triyltri-m-aminobenzoic acid) was developed. Eu/Tb-TATAB nanoparticles were constructed to identify DPA. The R-FL detection platform quantitatively detected DPA by monitoring the I545/I617 ratio of the characteristic fluorescence peak intensities of Tb3+ ions and Eu3+ ions. The ECL sensing platform successfully quantified DPA by exploiting the burst effect of DPA on the ECL signal. The above methods had highly sensitive and rapid detection of DPA in water and serum samples. The results showed that this dual-mode detection platform may be projected to be a powerful instrument for preventing related biological warfare and bio-terrorism.

Electrochemical biosensing for E.coli detection based on triple helix DNA inhibition of CRISPR/Cas12a cleavage activity

BACKGROUND

Escherichia coli (E.coli) is both a commensal and a foodborne pathogenic bacterium in the human gastrointestinal tract, posing significant potential risks to human health and food safety. However, one of the major challenges in E.coli detection lies in the preparation and storage of antibodies. In traditional detection methods, antibodies are indispensable, but their instability often leads to experimental complexity and increased false positives. This underscores the need for new technologies and novel sensors. Therefore, the development of a simple and sensitive method for analyzing E.coli would make significant contributions to human health and food safety.

RESULTS

We constructed an electrochemical biosensor based on triple-helical DNA and entropy-driven amplification reaction (EDC) to inhibit the cleavage activity of Cas12a, enabling high-specificity detection of E.coli. Replacing antibodies with nucleic acid aptamers (Apt) as recognition elements, we utilized the triple-helical DNA generated by the binding of DNA2 and DNA5/DNA6 double-helical DNA through the entropy-driven amplification reaction to inhibit the collateral cleavage activity of clustered regularly interspaced short palindromic repeats gene editing system (CRISPR) and its associated proteins (Cas). By converting E.coli into electrical signals and recording signal changes in the form of square wave voltammetry (SWV), rapid detection of E.coli was achieved. Optimization of experimental conditions and data detection under the optimal conditions provided high sensitivity, low detection limits, and high specificity.

SIGNIFICANCE

With a minimal detection limit of 5.02 CFU/mL and a linear range of 1 × 102 - 1 × 107 CFU/mL, the suggested approach was successfully verified to analyze E.coli at various concentrations. Additionally, after examining E.coli samples from pure water and pure milk, the recoveries ranged between 95.76 and 101.20%, demonstrating the method's applicability. Additionally, it provides a feasible research direction for the detection of pathogenic bacteria causing other diseases using the CRISPR/Cas gene editing system.

A simple and robust aptasensor assembled on surfactant-mediated liquid crystal interface for ultrasensitive detection of mycotoxin

Here, a simple aptasensing approach is represented to sensitively detect ochratoxin A (OTA) as one of the most perilous mycotoxins with carcinogenic, nephrotoxic, teratogenic, and immunosuppressive sequels on human health. The aptasensor is based on the alteration in the orientational order of liquid crystal (LC) molecules at the surfactant-arranged interface. Homeotropic alignment of LCs is achieved by the interaction of the surfactant tail with LCs. By perturbing the alignment of LCs due to the electrostatic interaction of the aptamer strand with the surfactant head, a colorful polarized view of the aptasensor substrate is induced drastically. While OTA causes the re-orientation of LCs to a vertical state by forming an OTA-aptamer complex that induces darkness of the substrate. This study shows that the length of the aptamer strand impacts the efficiency of the aptasensor; longer strand results in the greater disruption of LCs, and therefore, increases the aptasensor sensitivity. Hence, the aptasensor can determine OTA in the linear concentration range of 0.1 fM-1 pM as low as 0.021 fM. The aptasensor is capable to monitor OTA in grape juice, coffee drink, corn, and human serum real samples. The proposed LC-based aptasensor provides a cost-effective, easy-to-carry, operator-independent, and user-friendly array with great potential to develop portable sensing gadgets for food quality control and health care monitoring.

Recent Development in Biomedical Applications of Oligonucleotides with Triplex-Forming Ability

A DNA structure, known as triple-stranded DNA, is made up of three oligonucleotide chains that wind around one another to form a triple helix (TFO). Hoogsteen base pairing describes how triple-stranded DNA may be built at certain conditions by the attachment of the third strand to an RNA, PNA, or DNA, which might all be employed as oligonucleotide chains. In each of these situations, the oligonucleotides can be employed as an anchor, in conjunction with a specific bioactive chemical, or as a messenger that enables switching between transcription and replication through the triplex-forming zone. These data are also considered since various illnesses have been linked to the expansion of triplex-prone sequences. In light of metabolic acidosis and associated symptoms, some consideration is given to the impact of several low-molecular-weight compounds, including pH on triplex production in vivo. The review is focused on the development of biomedical oligonucleotides with triplexes.

A signal-on electrochemical DNA biosensor based on exonuclease III-assisted recycling amplification

DNA electrochemical detection technology has attracted tremendous interest in recent years. However, a facile and sensitive method for the detection of the disease indicators or genes is still waiting. Herein, we constructed a signal-on electrochemical platform for detecting the manganese superoxide dismutase (MnSOD) gene by incorporating a redox electrochemical signal probe (methylene blue) and exonuclease III-assisted target recycling signal amplification strategy. The sensor was prepared by self-assembly of a capture DNA probe of thiol-modified on GCE with gold electrodeposition. In the presence of target DNA, the exonuclease III can cleave the duplexes formed by the target DNA and the redox-labeled hairpin probes, release the target DNA and produce a residual sequence. The target DNA can continue to hybridize with the hairpin probe for the next cycle of amplification. The residual sequence hybridized with the surface-immobilized capture probes on AuNPs-modified GCE to generate a significantly amplified redox current. In particular, the redox current value of the resultant sensor showed a linear relationship with MnSOD gene concentration in the range of 1-10⁴ pM with the detection limit as low as 0.3 pM. Furthermore, the sensor has excellent specificity and can distinguish single-base mismatch from perfectly matched target DNA. The sensor is fast in operation, and simple in design for detecting different DNA sequences or DNA identification by selecting the appropriate probe sequence, thus shedding light on a good promising application when encountering disease outbreaks or for the early clinical diagnosis of gene-related diseases.

Exploring the Utility of ssDNA Aptamers Directed against Snake Venom Toxins as New Therapeutics for Snakebite Envenoming

Snakebite is a neglected tropical disease that causes considerable death and disability in the tropical world. Although snakebite can cause a variety of pathologies in victims, haemotoxic effects are particularly common and are typically characterised by haemorrhage and/or venom-induced consumption coagulopathy. Antivenoms are the mainstay therapy for treating the toxic effects of snakebite, but despite saving thousands of lives annually, these therapies are associated with limited cross-snake species efficacy due to venom variation, which ultimately restricts their therapeutic utility to particular geographical regions. In this study, we sought to explore the potential of ssDNA aptamers as toxin-specific inhibitory alternatives to antibodies. As a proof of principle model, we selected snake venom serine protease toxins, which are responsible for contributing to venom-induced coagulopathy following snakebite envenoming, as our target. Using SELEX technology, we selected ssDNA aptamers against recombinantly expressed versions of the fibrinogenolytic SVSPs ancrod from the venom of C. rhodostoma and batroxobin from B. atrox. From the resulting pool of specific ssDNA aptamers directed against each target, we identified candidates that exhibited low nanomolar binding affinities to their targets. Downstream aptamer-linked immobilised sorbent assay, fibrinogenolysis, and coagulation profiling experiments demonstrated that the candidate aptamers were able to recognise native and recombinant SVSP toxins and inhibit the toxin- and venom-induced prolongation of plasma clotting times and the consumption of fibrinogen, with inhibitory potencies highly comparable to commercial polyvalent antivenoms. Our findings demonstrate that rationally selected toxin-specific aptamers can exhibit broad in vitro cross-reactivity against toxin isoforms found in different snake venoms and are capable of inhibiting toxins in pathologically relevant in vitro and ex vivo models of venom activity. These data highlight the potential utility of ssDNA aptamers as novel toxin-inhibiting therapeutics of value for tackling snakebite envenoming.

Triple-Helix Molecular Switch Triggered Cleavage Effect of DNAzyme for Ultrasensitive Electrochemical Detection of Chloramphenicol

The abuse of chloramphenicol (CAP) in animal-derived products leads to serious food safety problems, so the sensitive and accurate determination of CAP residues has great noteworthiness for public health. Herein, we present a novel electrochemical aptasensor that incorporates a poly(diallyldimethylammonium chloride) functionalized graphene/Ag@Au nanosheets (PDDA-Gr/Ag@Au NSs) composite modified electrode and a DNAzyme signal amplification effect triggered by a triple-helix molecular switch (THMS) for detecting CAP. The PDDA-Gr/Ag@Au NSs composite has the advantages of high surface area, great conductivity, and dispersibility and has successfully improved the electrochemical performance of the electrode. Specific interaction with CAP will cause the signal transduction probe (STP) to be released from the THMS. After that, the DNAzyme will be activated with the help of Pb²⁺ and remove the immobilized signal probe on the electrode surface. The signal change was recorded by square wave voltammetry (SWV) and led to an accurate quantification of CAP. With all these features, the proposed sensing strategy yielded a satisfactory analytical performance with linearity between 1 pM and 1 μM and a limit of detection of 18.6 fM. Furthermore, the aptasensor shows excellent specificity for CAP in the presence of other antibiotics and resists interference with other common metal ions. Importantly, the performance is not diminished when the constructed aptasensor is applied to measuring CAP in milk powder. This THMS-based method is easy to design, and alteration to different targets can be achieved by simply replacing the aptamer sequence in the THMS. Therefore, this method shows significant prospects as a flexible platform for accurate monitoring of antibiotic residues in foodstuffs.

Efficient Screening of Pesticide Diazinon-Binding Aptamers Using the Sol-Gel-Coated Nanoporous Membrane-Assisted SELEX Process and Next-Generation Sequencing

Aptamer-based methods for detecting pesticides are more efficient than antibody-based methods by high thermal stability, low molecular weight, easy modification, and low cost. In this study, the systematic evolution of ligands by exponential enrichment (SELEX) process, combined with next-generation sequencing (NGS), was performed to select aptamers specific to the pesticide, diazinon, which was fixed on a sol-gel-coated nanoporous-anodized aluminum oxide membrane to overcome the immobilization effect of general method and simplify the elution step. The frequency of specific nucleotide sequences obtained after SELEX rounds was directly analyzed using NGS to eliminate the time-consuming cloning process used in the general SELEX methods. Nine sequences with the highest frequency after SELEX round 10 followed by NGS were selected and tested to derive their binding affinity with the target, diazinon, through circular dichroism (CD) spectrophotometry. The CD signal difference of the aptamer candidates ranged from 0.13 to 2.242 mdeg between diazinon-only treated and diazinon-aptamer-treated samples at a wavelength near 270 nm. Aptamer D-4, which had the highest binding affinity from CD spectrophotometry analysis, showed no cross-reactivity with non-target pesticides, such as baycarb, bifenthrin, and pyridaben, but interacted with the other pesticides, fipronil and 2-phenylphenol. Therefore, an aptamer was effectively screened by selection of high-frequency candidates after SELEX-NGS followed by CD analysis with the highest difference signal. A follow-up study is needed to confirm whether the proposed SELEX process combined with NGS for the discovery of aptamers for new targets can further shorten the SELEX cycle by reducing the number of SELEX rounds to 10 or less.

A Colorimetric Ag+ Probe for Food Real-Time Visual Monitoring

Monitoring food quality throughout the food supply chain is critical to ensuring global food safety and minimizing food losses. Here we find that simply by mixing an aqueous solution of sugar-stabilized Ag⁺ and amines in an open vessel leads to the generation of Ag NPs and an intelligent evaluation system based on a colorimetric Ag⁺ probe is developed for real-time visual monitoring of food freshness. The self-assembly reaction between methylamine (MA) generated during meat storage and the colorimetric Ag⁺ probe produces different color changes that indicate changes in the quality of the meat. The colorimetric Ag⁺ probe was integrated into food packaging systems for real-time monitoring of chilled broiler meat freshness. The proposed evaluation system provides a versatile approach for detecting biogenic amines and monitoring chilled broiler meat freshness and it has the advantages of high selectivity, real-time and on-site measurements, sensitivity, economy, and safety and holds great public health significance.

Advances in Optical Sensors for Persistent Organic Pollutant Environmental Monitoring

Optical chemical sensors are widely applied in many fields of modern analytical practice, due to their simplicity in preparation and signal acquisition, low costs, and fast response time. Moreover, the construction of most modern optical sensors requires neither wire connections with the detector nor sophisticated and energy-consuming hardware, enabling wireless sensor development for a fast, in-field and online analysis. In this review, the last five years of progress (from 2017 to 2021) in the field of optical chemical sensors development for persistent organic pollutants (POPs) is provided. The operating mechanisms, the transduction principles and the types of sensing materials employed in single selective optical sensors and in multisensory systems are reviewed. The selected examples of optical sensors applications are reported to demonstrate the benefits and drawbacks of optical chemical sensor use for POPs assessment.

A novel aptasensor for colorimetric monitoring of tobramycin: Strategy of enzyme-like activity of AuNPs controlled by three-way junction DNA pockets

In this study, a novel colorimetric sensor was introduced to detect tobramycin (TOB) based on controlling the catalytic activity of gold nanoparticles (AuNPs) by the three-way junction aptamer pockets. In the absence of TOB, the surfaces of AuNPs were masked by the three-way junction pockets that prevented their catalytic activation for the reduction of 4-Nitrophenol in the presence of NaBH₄. While the formation of the pockets was prevented in the presence of TOB that facilitated the 4-Nitrophenol access to AuNPs. Hence, the catalytic reduction of 4-Nitrophenol induced a color change of the solution from yellow to colorless, highlighting the presence of the target. The aptasensing assay provided good target specificity with a detection limit (LOD) of 1.16 µM and a linear dynamic range over 4-32 µM. The aptasensor was successfully applied to quantitatively monitor TOB in the human serum and milk samples with the LODs of 1.38 and 1.42 µM and recovery values of 94.87-105.75% and 93.75-105.31%, respectively.

The Challenges of Developing Biosensors for Clinical Assessment: A Review

Emerging research in biosensors has attracted much attention worldwide, particularly in response to the recent pandemic outbreak of coronavirus disease 2019 (COVID-19). Nevertheless, initiating research in biosensing applied to the diagnosis of diseases is still challenging for researchers, be it in the preferences of biosensor platforms, selection of biomarkers, detection strategies, or other aspects (e.g., cutoff values) to fulfill the clinical purpose. There are two sides to the development of a diagnostic tool: the biosensor development side and the clinical side. From the development side, the research engineers seek the typical characteristics of a biosensor: sensitivity, selectivity, linearity, stability, and reproducibility. On the other side are the physicians that expect a diagnostic tool that provides fast acquisition of patient information to obtain an early diagnosis or an efficient patient stratification, which consequently allows for making assertive and efficient clinical decisions. The development of diagnostic devices always involves assay developer researchers working as pivots to bridge both sides whose role is to find detection strategies suitable to the clinical needs by understanding (1) the intended use of the technology and its basic principle and (2) the preferable type of test: qualitative or quantitative, sample matrix challenges, biomarker(s) threshold (cutoff value), and if the system requires a mono- or multiplex assay format. This review highlights the challenges for the development of biosensors for clinical assessment and its broad application in multidisciplinary fields. This review paper highlights the following biosensor technologies: magnetoresistive (MR)-based, transistor-based, quartz crystal microbalance (QCM), and optical-based biosensors. Its working mechanisms are discussed with their pros and cons. The article also gives an overview of the most critical parameters that are optimized by developing a diagnostic tool.

Recent Advances in Aptamer-Based Biosensors for Global Health Applications

Since aptamers were first reported in the early 2000s, research on their use for the detection of health-relevant analytical targets has exploded. This review article provides a brief overview of the most recent developments in the field of aptamer-based biosensors for global health applications. The review provides a description of general aptasensing principles and follows up with examples of recent reports of diagnostics-related applications. These applications include detection of proteins and small molecules, circulating cancer cells, whole-cell pathogens, extracellular vesicles, and tissue diagnostics. The review also discusses the main challenges that this growing technology faces in the quest of bringing these new devices from the laboratory to the market.

An excellent electrochemical aptasensor for amyloid-β oligomers based on a triple-helix aptamer switch via target-triggered signal transduction DNA displacement events

An excellent aptasensor for electrochemical detection of amyloid-β oligomers (AβOs) at trace levels was fabricated based on a triple-helix aptamer switch (THAS) via target-triggered signal transduction DNA displacement events. Specifically, a single-stranded anti-AβO aptamer (Apt) carrying two symmetrical arm segments was first attached via Au-S binding to an Au electrode. Gold nanoparticle (GNP)-tagged signal transduction probes (GNP-STPs) were simultaneously hybridized with the two arm segments of the Apt, and a rigid THAS was formed on the Au electrode. Compared to the conventional hybrid, the number of GNPs on the Au electrode increased significantly with the THAS, effectively improving the stability of the Apt to avoid lodging. Trithiocyanuric acid (TA) was utilized to further gather the GNPs and form network-like TA/GNPs. As a result, the differential pulse voltammetry (DPV) response of GNPs was clearly enhanced. When AβOs were present, target-triggered signal transduction DNA displacement events were carried out from THAS via the reaction of the Apt with the AβOs, which caused the GNP-STP to dissociate from the Au electrode, and thus a significant reduction in the DPV response was observed. The assay was able to sensitively detect trace AβOs by monitoring the AβO-controlled DPV response change. It exhibited a wide linear range from 1 fM to 10 pM with a low detection limit of 0.5 fM, and was successfully employed for the determination of AβOs in 20 serum samples, with good recovery. Moreover, the developed assay can provide a sensitive and selective platform for many studies or investigations related to Alzheimer's disease (AD) monitoring and treatment.

Ratiometric Electrochemistry: Improving the Robustness, Reproducibility and Reliability of Biosensors

Electrochemical biosensors are an increasingly attractive option for the development of a novel analyte detection method, especially when integration within a point-of-use device is the overall objective. In this context, accuracy and sensitivity are not compromised when working with opaque samples as the electrical readout signal can be directly read by a device without the need for any signal transduction. However, electrochemical detection can be susceptible to substantial signal drift and increased signal error. This is most apparent when analysing complex mixtures and when using small, single-use, screen-printed electrodes. Over recent years, analytical scientists have taken inspiration from self-referencing ratiometric fluorescence methods to counteract these problems and have begun to develop ratiometric electrochemical protocols to improve sensor accuracy and reliability. This review will provide coverage of key developments in ratiometric electrochemical (bio)sensors, highlighting innovative assay design, and the experiments performed that challenge assay robustness and reliability.

Contribution of Nanomaterials to the Development of Electrochemical Aptasensors for the Detection of Antimicrobial Residues in Food Products

The detection of antimicrobial residues in food products of animal origin is of utmost importance. Indeed antimicrobial residues could be present in animal derived food products because of animal treatments for curative purposes or from illegal use. The usual screening methods to detect antimicrobial residues in food are microbiological, immunological or physico-chemical methods. The development of biosensors to propose sensitive, cheap and quick alternatives to classical methods is constantly increasing. Aptasensors are one of the major trends proposed in the literature, in parallel with the development of immunosensors based on antibodies. The characteristics of electrochemical sensors (i.e., low cost, miniaturization, and portable instrumentation) make them very good candidates to develop screening methods for antimicrobial residues in food products. This review will focus on the recent advances in the development of electrochemical aptasensors for the detection of antimicrobial residues in food products. The contribution of nanomaterials to improve the performance characteristics of electrochemical aptasensors (e.g., Sensitivity, easiness, stability) in the last ten years, as well as signal amplification techniques will be highlighted.

A sensitive electrochemiluminescence DNA biosensor based on the signal amplification of ExoIII enzyme-assisted hybridization chain reaction combined with nanoparticle-loaded multiple probes

An electrochemiluminescence (ECL) DNA biosensor based on ExoIII exonuclease assistance and hybridization chain reaction (HCR) amplification technology has been constructed. ExoIII exonuclease and triple-helix DNA molecular switch are used in detecting a target in circulation. By combining HCR with AuNPs@DNA, a novel signal probe is built, which enables multiple signal amplification and the high-sensitive detection of transgenic rice BT63 DNA. The Fe₃O₄@Au solution is added to a magneto-controlled glassy carbon electrode, and sulfhydryl-modified capture DNA (CP) is immobilized on Fe₃O₄@Au through the Au-S bond. Mercaptoethanol is added to close sites and prevent the nonspecific adsorption of CP on the magnetron glassy carbon electrode. A target DNA is added to a constructed triple-helix DNA molecular centrifuge tube for reaction. Owing to base complementation and the reversible switching of the triple-helix DNA molecular state, the target DNA turns on the triple-helix DNA molecular switch and hybridizes with a long-strand recognition probe (RP) to form a double-stranded DNA (dsDNA). Exonuclease ExoIII is added to specifically recognize and cut the dsDNA and to release the target DNA. The target DNA strand then circulates back completely to open the multiple triple-helix DNA molecular switch, releasing a large number of signal transduction probes (STP). To hybridize with CP, a large amount of STP is added to the electrode. Finally, a AuNPs@DNA signal probe is added to hybridize with STP. H1 and H2 probes are added for the hybridization chain reaction and the indefinite extension of the primer strand on the probe. Then, tris-(bipyridyl)ruthenium(II) is added for ECL signal detection with PBS-tri-n-propylamine as the base solution. In the concentration range 1.0 × 10^-16 to 1.0 × 10^-8 mol/L of the target DNA, good linear relationship was achieved with the corresponding ECL signal. The detection limit is 3.6 × 10^-17 mol/L. The spiked recovery of the rice samples range from 97.2 to 101.5%. The sensor is highly sensitive and has good selectivity, stability, and reproducibility. A novel electrochemiluminescence biosensor with extremely higher sensitivity was prepared for the determination of ultra-trace amount transgenic rice BT63 DNA. The sensitivity was significantly improved by multiple signal enhancements. Firstly, a large number of signal transduction probes are released when the triple-helix DNA molecular switch unlock after recycles assisted by ExoIII exonuclease under target BT63 DNA; and then the signal transduction probes hybridize with the signal probes of AuNPs@(DNA-HCR) produced through hybridization chain reaction. Finally, the signal probes which were embedded with a large amount of electrochemiluminescence reagent produce high luminescence intensity. The detection limit was 3.6 × 10^-17 mol/L, which is almost the most sensitive methods reported.

Switchable electrochemical aptasensor for amyloid-β oligomers detection based on triple helix switch coupling with AuNPs@CuMOF labeled signaling displaced-probe

The aggregation of amyloid-β oligomers (AβOs) with extremely strong neurotoxicity has been proved to be the main pathogenesis of Alzheimer's disease (AD). For sensitive quantification of AβOs, a switchable electrochemical aptasensor is proposed. Metal organic framework carrying Au nanoparticles (AuNPs@CuMOF) has been used to label signaling displaced-probe (SD), which formed triple helix switch (THS) by hybridizing with label-free anti-AβOs aptamer (Apt) on the electrodeposited palladium electrode (EPd). Thus, a relatively strong response of differential pulse voltammetry (DPV) was produced (switch on). With the specific binding between AβOs and Apt, the DPV response obviously decreased, owing to destroyed structure of THS and the separation of AuNPs@CuMOF/SD from the EPd (switch off). The mode of "switch on-off" can dramatically enhance the AβOs-dependent DPV intensity change. As a result, the switchable EA exhibited excellent selectivity and sensitivity with the linear range from 0.5 fM to 500 fM and the detection limit of 0.25 fM. When evaluating the AβOs of artificial cerebrospinal fluid (aCSF) samples, the switchable EA exhibited desirable feasibility, and the results are basically consistent with the enzyme linked immunosorbent assay (ELISA). The work could provide a potential tool of the AD diagnosis and a bright future in clinical applications.

An ultrasensitive platform for PCB77 detection: New strategy for liquid crystal-based aptasensor fabrication

Polychlorinated biphenyls (PCBs) are considered persistent bio-accumulative toxicants which threats global food safety and environmental health. Traditional analytical techniques for detection of PCBs are time-consuming and they do not satisfy urgent need for rapid and accurate monitoring of these persistent pollutants. Biosensor technology may be promising in this respect. Here we demonstrate a novel liquid crystal (LC)-based aptasensing platform as a promising label-free and rapid biosensor for PCB77 detection. This novel molecular strategy utilize triple-helix molecular conformational switch which is mediated formation of duplex on sensing platform in presence of target. Duplex forming leads to optical change from dark to bright in a liquid crystal based aptasensor. The limit of quantification of the LC-aptasensor to PCB77 is 1.5 × 10^-5 μg/L with comparable selectivity. Besides, we also demonstrated that this system is able to detect PCB77 in tap water, environmental water and milk. This strategy has potential for label-free and portable detection of different targets without any aptamer sequence length restrictions.

A Sensitive Fluorescent Assay for Tetracycline Detection Based on Triple-helix Aptamer Probe and Cyclodextrin Supramolecular Inclusion

Herein, an effective pyrene excimer signaled fluorescent biosensor for the determination of tetracycline based on triple-helix aptamer probe (TAP) and supramolecular inclusion of cyclodextrin was reported. The TAP was devised containing an aptamer loop, two DNA segment stems and a triplex-forming oligonucleotide (signal probe) labeled with pyrenes at 5' and 3' ends. The presence of target could result in its binding towards aptamer with a mighty affinity, leading to a conformation change of the TAP and whereupon the release of the signal probe. This liberty of signal probe enabled the formation of pyrene excimer, generating fluorescence signals. Further, signal amplification was fulfilled through the addition of γ-cyclodextrin which could interact with pyrene dimer, thus leading to an enhanced "on-state" of the sensing ensemble. In contrast, when the target was absent, the sensing ensemble remained "off-state" because of the long distance between two pyrene molecules. When the conditions were properly optimized, the increasing signal kept a linear dependence on target concentrations ranging from 5.0 nM to 100 nM, and the detection limit reached as low as 1.6 nM. In this way, a newly-constructed, simple, and economically affordable protocol enjoys desirable efficiency, sensitivity, specificity in biosensing. Also, its universality as another attractive behalf in assaying diverse targets was envisioned with only the need of matched aptamer replacement.

Switching the activity of Taq polymerase using clamp-like triplex aptamer structure

In nature, allostery is the principal approach for regulating cellular processes and pathways. Inspired by nature, structure-switching aptamer-based nanodevices are widely used in artificial biotechnologies. However, the canonical aptamer structures in the nanodevices usually adopt a duplex form, which limits the flexibility and controllability. Here, a new regulating strategy based on a clamp-like triplex aptamer structure (CLTAS) was proposed for switching DNA polymerase activity via conformational changes. It was demonstrated that the polymerase activity could be regulated by either adjusting structure parameters or dynamic reactions including strand displacement or enzymatic digestion. Compared with the duplex aptamer structure, the CLTAS possesses programmability, excellent affinity and high discrimination efficiency. The CLTAS was successfully applied to distinguish single-base mismatches. The strategy expands the application scope of triplex structures and shows potential in biosensing and programmable nanomachines.

A PNA-DNA2 Triple-Helix Molecular Switch-Based Colorimetric Sensor for Sensitive and Specific Detection of microRNAs from Cancer Cells

Peptide nucleic acids (PNAs), the synthetic DNA mimics that can bind to oligonucleotides to form duplexes, triplexes, and quadruplexes, could be advantageous as probes for nucleic acid sequences owing to their unique physicochemical and biochemical properties. We have found that a homopurine PNA strand could bind to two homopyrimidine DNA strands to form a PNA-DNA₂ triplex. Moreover, the cyanine dye DiSC₂ (5) could bind with high affinity to this triplex and cause a noticeable color change. On the basis of this phenomenon, we have designed a label-free colorimetric sensing platform for miRNAs from cancer cells by using a PNA-DNA₂ triple-helix molecular switch (THMS) and DiSC₂ (5). This sensing platform can detect miRNA-21 specifically with a detection limit of 0.18 nM, which is comparable to that of the THMS-mediated fluorescence sensing platform. Moreover, this colorimetric platform does not involve any chemical modification or enzymatic signal amplification, which boosts its applicability and availability at the point of care in resource-limited settings. The universality of this approach can be simply achieved by altering the sequences of the probe DNA for specific targets.

Formation of a DNA triple helical structure at BOLF1 gene of human herpesvirus 4 (HH4) genome

Eukaryotic genomes contain a large number of pyrimidine-purine rich regions and such regions can assume varied DNA conformations, including triple-stranded structures. These structures have fascinated scientists because of their considerable therapeutic applications. These structures have also profound implications in the field of nanotechnology as they can be used to develop DNA-based nanostructures and materials. Therefore, for any application, it is important to understand the formation of triplex structures, both in quantitative and qualitative terms. A combination of gel electrophoresis, UV-thermal denaturation and circular dichroism (CD) spectroscopy was used to investigate the formation of inter- as well as intramolecular triplex, in pyrimidine motif at BOLF1 gene of human herpesvirus 4 (HH4) genome. This gene codes for inner tegument protein, which plays crucial roles in viral replication. The said oligopurine•oligopyrimidine duplex was targeted via a designed triple helix forming oligopyrimidine nucleotide (TFO) in intermolecular as well as intramolecular fashion. Our studies revealed that intramolecular triplex formation takes place at acidic as well as at neutral pH; whereas low pH is required for its intermolecular version. This comparative study between inter- and intramolecular triplex allowed us to demonstrate that intramolecular structure is more stable to its intermolecular counterpart. Numerous models for mono-, bi- and trimolecular structures adopted by these DNA sequences have been suggested. This report adds to our existing knowledge about DNA triple helical structures.

The Growing Interest in Development of Innovative Optical Aptasensors for the Detection of Antimicrobial Residues in Food Products

The presence of antimicrobial residues in food-producing animals can lead to harmful effects on the consumer (e.g., allergies, antimicrobial resistance, toxicological effects) and cause issues in food transformation (i.e., cheese, yogurts production). Therefore, to control antimicrobial residues in food products of animal origin, screening methods are of utmost importance. Microbiological and immunological methods (e.g., ELISA, dipsticks) are conventional screening methods. Biosensors are an innovative solution for the development of more performant screening methods. Among the different kinds of biosensing elements (e.g., antibodies, aptamers, molecularly imprinted polymers (MIP), enzymes), aptamers for targeting antimicrobial residues are in continuous development since 2000. Therefore, this review has highlighted recent advances in the development of aptasensors, which present multiple advantages over immunosensors. Most of the aptasensors described in the literature for the detection of antimicrobial residues in animal-derived food products are either optical or electrochemical sensors. In this review, I have focused on optical aptasensors and showed how nanotechnologies (nanomaterials, micro/nanofluidics, and signal amplification techniques) largely contribute to the improvement of their performance (sensitivity, specificity, miniaturization, portability). Finally, I have explored different techniques to develop multiplex screening methods. Multiplex screening methods are necessary for the wide spectrum detection of antimicrobials authorized for animal treatment (i.e., having maximum residue limits).

SELEX tool: a novel and convenient gel-based diffusion method for monitoring of aptamer-target binding

BACKGROUND

Aptamers, single-stranded DNAs or RNAs, can be selected from a library containing random sequences using a method called Systematic Evolution of Ligands by EXponential Enrichment (SELEX). In SELEX, monitoring the enriching statuses of aptamer candidates during the process is a key step until today. Conformational change of an aptamer caused by target-binding in gel can be used to indicate its statuses of binding.

RESULTS

In this study, an easy-to-implement gel-based diffusion method (GBDM) was developed to monitor the interaction between enriched aptamer candidates and their targets. In order to prove the concept, characterization of aptamers targeting their targets including protein (thrombin) and non-protein molecules (acetamiprid, ATP, atrazine, profenofos and roxithromycin), respectively, were performed using mini gels. Our method has advantages over the common methods including easy performed with labor- and time- saving in experimental operation. The concept has been proven by monitoring enrichment of dynamic aptamer candidate libraries targeting a small molecule 2,2-bis(4-chlorophenyl) acetic acid (DDA) during SELEX process. A mini gel cassette was designed and fabricated by our laboratory to make mini agarose gels for diffusion with different directions.

CONCLUSIONS

These results indicate that GBDM, in particular, chasing diffusion is suitable for monitoring the interaction between enriched aptamer candidates and their targets. These pioneering efforts are helpful for novel aptamer selection by breaking through the technical bottleneck of aptamer development and helpful for development of novel aptasensors.

The cooperative interaction of triplex forming oligonucleotides on DNA-triplex formation at electrode surface: Molecular dynamics studies and experimental evidences

An extensive study on cooperative interaction of Triplex Forming Oligonucleotides (TFOs) with a double strand DNA, to form a triplex-DNA structure at electrode surface, is here reported. The cooperative effect on triplex structure formation was assumed by the higher binding enthalpy value, calculated for the interaction between the duplex DNA structure and the TFO1 and TFO2 probes (-67.3 KJ/mol), respect the sum of the single duplex-TFO1 and duplex-TFO2 interactions (-47.0 kJ/mol). The formation of triplex-DNA structure was proven by kinetic modelling study performed using the Luzar and Chandler model. The results indicate that after 500 ns from interaction, H-bonds between the base pairs in the double strand DNA are weaken while new H-bonds between the TFOs and duplex DNA are formed. Molecular dynamic (MD) simulations indicate that the TFOs sequence distance (138 bps) and the amount of TA*T triplet units are the keystones for the effectiveness of the cooperative effect, reaching for the selected target a minimum of energy value of -19452.6 kJ/mol. The MD data were experimentally corroborated by electrochemical measurements, detecting a HBV-clone genome at TFOs modified electrode surface. The interaction was electrochemical transduced by an intercalative Osmium based compound. The Langmuir isotherm model reports for the forming triplex DNA an association constant value of about 2.9 × 10¹⁶M^-1, this high value could be attributed to the synergic contribution of the TFOs cooperative effect and to the rigid circular duplex structure. Finally, AFM and SEM investigations suggest the formation of a triplex-DNA structure at electrode surface, consisting in circles of about 1.5 um in diameter with asymmetric stranded thickness. This finding data paving the way to future development of advanced miniaturized DNA computing and biosensors.

Ultrasensitive aptasensing of insulin based on hollow porous C3N4/S2O82-/AuPtAg ECL ternary system and DNA walker amplification

In this work, a high-efficiency electrochemiluminescence (ECL) ternary system was constructed for ultrasensitive assay of insulin based on hollow porous graphitic carbon nitride (HP-C₃N₄) as novel luminophore, S₂O₈^2- as coreactant and tri-metallic AuPtAg as coreaction accelerator. Specifically, in comparison with C₃N₄-based bulk nanomaterials, the as-prepared HP-C₃N₄ exhibits high luminous efficiency though decreased inner filter effect and minimized inactive ECL emitter. Noteworthy, tri-metallic AuPtAg, possessing the superiority of Au, Pt and Ag, was first used as coreaction accelerator to significantly enhance ECL intensity of HP-C₃N₄ and S₂O₈^2-. As a consequence, with the resultant ECL ternary (HP-C₃N₄/S₂O₈^2-/AuPtAg) system as aptasensing platform, a high-intense initial ECL signal was achieved. Subsequently, ferrocene-labeled quenching probe (Fc-HP2) as ECL quencher was used to quench the initial signal and achieve the low-background noise. Eventually, in the presence of insulin, the target-induced triple-helix molecular switch and Nb.BbvCI-assisted DNA walker amplification were executed to recover a strong ECL signal by releasing Fc-HP2 from the electrode surface. As expected, the constructed aptasensor presents an excellent sensitivity and selectivity for detecting insulin range from 0.05 pg mL^-1 to 100 ng mL^-1 with a detection limit of 17 fg mL^-1. This work provides a new avenue for developing highly efficient HP-C₃N₄ based ECL ternary system as well as ultrasensitive ECL aptasensors for bioanalysis.

Signal-switchable lab-on-paper photoelectrochemical aptasensing system integrated triple-helix molecular switch with charge separation and recombination regime of type-II CdTe@CdSe core-shell quantum dots

Herein, a new "on-off-on" signal switch system combined triple helix molecular switch with efficient charge separation and transfer between different sensitization units was designed for the ultrasensitive photoelectrochemical (PEC) determination of prostate-specific antigen (PSA). Concretely, the initial "signal-on" state was obtained via the cascaded sensitization structure consisting of type-II CdTe@CdSe core-shell quantum dots (QDs), CdS QDs, and ZnO nanotubes, which were assembled on Au nanoparticles modified paper fibers with the aid of signal transduction probe (STP). Thereinto, the type-II CdTe@CdSe QDs with hole-localizing core and electron-localizing shell could enable the ultrafast charge transfer and retard the charge recombination, magnifying the initial photocurrent response and preserving the high efficiency of signal-switchable PEC aptasensing system. Subsequently, the PSA aptamer (PSA-Apt) modified with gold nanoparticles (GNPs) was introduced by the hybridization of PSA-Apt with STP and the hairpin configuration of STP changed from closed to open state, forming a triple-helix structure. Hence, the CdTe@CdSe QDs labeled on the terminal of STP moved away from the electrode surface while the GNPs kept attached close to it. The proposed aptasensor turned to "signal-off" state because of the dual inhibition of vanished cosensitization effect and signal quenching effect of GNPs. Upon the target recognition, the triple-helix structure was perturbed with the formation of DNA-protein complex and the recovery of STP hairpin structure, resulting in the second "switch-on" state. Based on the target-induced photocurrent enhancement, the proposed PEC aptasensor was utilized for the determination of PSA with high sensitivity, persuasive selectivity, and excellent stability.

An electrochemical strategy for tetracycline detection coupled triple helix aptamer probe with catalyzed hairpin assembly signal amplification

Incorporating elements of triple-helix aptamer probes (TAP), catalyzed hairpin assembly (CHA) signal amplification and host-guest recognition, a novel "signal-on" sensing strategy for sensitive electrochemical quantification of tetracycline (TC) was reported unprecedentedly. TAP was formed involving an aptamer loop, two-segment stems and a triplex oligonucleotide serving as trigger probe. Then, the trigger probe would be released from TAP once the target presented due to the conformational variation of TAP induced by aptamer binding event, sparking off the upcoming CHA amplification reaction, in which two coexisting DNA hairpins (H1 and H2 both modified with the electroactive molecules) would hybridize into plentiful H1-H2 double helices. Afterwards, the Exonuclease III was added, demolishing double helices and simultaneously releasing plentiful electroactive molecules which were capable of diffusing onto the electrode surface under the assistance of β-cyclodextrin due to host-guest recognition, where appreciable signals were enriched and generated. As thus, considerably slight amounts of targets though, emitted trigger probes, yet efficiently engining spectacular CHA cycles of reactions through which amplified signals were yielded, and in turn progressively enabling the sensitive target detection done. Under optimal conditions, the growing signal stayed a linear relation along with the logarithm of the target concentrations ranging from 0.2 nM to 100 nM, the detection limit reaching as low as 0.13 nM. This approach was desirable regarding to sensitivity, detection limit and range, prospectively rendering a service for diverse targets detection by easily replacing the matched aptamer loop of TAP.

Gold interdigitated triple-microelectrodes for label-free prognosticative aptasensing of prostate cancer biomarker in serum

A simple, single-masked gold interdigitated triple-microelectrodes biosensor is presented by taking the advantage of an effective self-assembled monolayer (SAM) using an amino-silanization technique for the early detection of a prostate cancer's biomarker, the prostate-specific antigen (PSA). Unlike most interdigitated electrode biosensors, biorecognition happens in between the interdigitated electrodes, which enhances the sensitivity and limit of detection of the sensor. Using the Faradaic mode electrochemical impedance spectroscopy (EIS) technique to quantify the PSA antigen, the developed sensing platform demonstrates a logarithmic detection of PSA ranging from 0.5 ng/ml to 5000 ng/ml, an estimated LOD down to 0.51 ng/ml in the serum, and a good sensor's reproducibility. The sensor's detection range covers the clinical threshold value at 4 ng/ml and the crucial diagnosis 'grey zone' of 4-10 ng/ml of PSA in serum for an accurate cancer diagnosis. The selectivity test revealed an excellent discrimination of other competing proteins, with a recorded detection signals at 5 ng/ml PSA as high as 7-fold increase versus the human serum albumin (HSA) and 8-fold increase versus the human glandular kallikrein 2 (hK2). The stability test showed an acceptable stability of the aptasensor recorded at six (6) days before the detection signal started degrading below 10% of the peak detection value. The developed sensing scheme is proven to exhibit a great potential as a portable prostate cancer biosensor, also as a universal platform for bio-molecular sensing with the versatility to implement nanoparticles and other surface chemistry for various applications.

Aptasensors for pesticide detection

Pesticide contamination has become one of the most serious problems of public health in the world, due to their wide application in agriculture industry to guarantee the crop yield and quality. The detection of pesticide residues plays an important role in food safety management and environment protection. However, the conventional detection methodologies cannot realize highly sensitive, selective and on-site detection, which limits their applications. Aptamers are short single-stranded oligonucleotides (RNA or DNA) selected by SELEX method, which can selectively bind to their targets with high affinity. Compared with the commonly used antibodies or enzymes in designing biosensors, aptamers exhibit better stability, low molecular weight, easy modification and low cost, and were regarded as excellent candidates for developing aptasensors for pesticide detection. In this review, application of aptamers for pesticide detection was reviewed. Firstly, aptamers specifically bind to various pesticides were first summarized. Secondly, the progresses and highlights of developing aptasensors for highly-sensitive and selective detection of pesticide residues were systematically provided. Finally, the present challenges and future perspectives for developing novel highly-effective aptasensor for the detection of pesticide residues were discussed.

A reusable electrochemical sensor for one-step biosensing in complex media using triplex-forming oligonucleotide coupled DNA nanostructure

Here we report an electrochemical DNA (E-DNA) sensor to detect a variety of analytes by using a novel interfacial probe that rationally integrates triplex-forming oligonucleotide (TFO) into a tetrahedral DNA nanostructure (TDN). In the presence of analyte, the blocked TFO is released and subsequently binds the edge of TDN to form a triplex DNA structure, which confines the redox reporter to be in close proximity to the underlying electrode and enhances the electrochemical signal. Thanks to the unique design and property of the probe, the proposed sensor could efficiently suppress the background signal (from 0.69 μA to 0.092 μA) and thus enhance the signal-to-noise ratio, resulting in improved sensing performance. Furthermore, the sensor displays new merits such as rapid response (∼35 min), one-step operation, easy regeneration (buffer change) and good generality (changing recognition element) compared with traditional TDN-based E-DNA sensor using enzyme displays signal transducer. In addition, to demonstrate real-world applicability of this new sensor, we have successfully detected different analytes (e.g., DNA, protein, and metal ion) in the complex media (e.g., serum, blood, and lake water), implying its considerable potential for precise bioanalysis in the future.