Electrically nanowired-enzymes for probe modification and sensor fabrication

Tailored Polypyrrole Nanofibers as Ion-to-Electron Transduction Membranes for Wearable K+ Sensors

Conductive polymers are recognized as ideal candidates for the development of noninvasive and wearable sensors for real-time monitoring of potassium ions (K+) in sweat to ensure the health of life. However, the low ion-to-electron transduction efficiency and limited active surface area hamper the development of high-performance sensors for low-concentration K+ detection in the sweat. Herein, a wearable K+ sensor is developed by tailoring the nanostructure of polypyrrole (PPy), serving as an ion-to-electron transduction layer, for accurately and stably tracing the K+ fluctuation in human sweat. The PPy nanostructures can be tailored from nanospheres to nanofibers by controlling the supramolecular assembly process during PPy polymerization. Resultantly, the ion-to-electron transduction efficiency (17-fold increase in conductivity) and active surface area (1.3-fold enhancement) are significantly enhanced, accompanied by minimized water layer formation. The optimal PPy nanofibers-based K+ sensor achieved a high sensitivity of 62 mV decade-1, good selectivity, and solid stability. After being integrated with a temperature sensor, the manufactured wearable sensor realized accurate monitoring of K+ fluctuation in the human sweat.

In vivo protein-based biosensors: seeing metabolism in real time

Biological homeostasis is a dynamic and elastic equilibrium of countless interlinked biochemical reactions. A key goal of life sciences is to understand these dynamics; bioengineers seek to reconfigure such networks. Both goals require the ability to monitor the concentration of individual intracellular metabolites with sufficient spatiotemporal resolution. To achieve this, a range of protein or protein/DNA signalling circuits with optical readouts have been constructed. Protein biosensors can provide quantitative information at subsecond temporal and suborganelle spatial resolution. However, their construction is fraught with difficulties related to integrating the affinity- and selectivity-endowing components with the signal reporters. We argue that development of efficient approaches for construction of chemically induced dimerisation systems and reporter domains with large dynamic ranges will solve these problems.

Thermal-controlled active sensor module using enzyme-regulated UiO-66-NH2/MnO2 fluorescence probe for total organophosphorus pesticide determination

An enzyme-regulated UiO-66-NH₂/MnO₂ fluorescence sensor, fully functionalized with spectrometric capacities, is developed for budget-friendly total organophosphorus pesticides (OPs) determination. The fluorescence probe, UiO-66-NH₂/MnO₂, is hydrothermally synthesized and morphologically examined. A specialized enzyme-catalyzed reaction, which can be gradually inhibited by OPs, is designed with participations of alkaline phosphatase (ALP) and sodium L-ascorbyl-2-phosphate (AAP). The reaction product of ascorbic acid (AA) decomposes MnO₂ and restores UiO-66-NH₂ fluorescence, establishing a relationship between OPs level and fluorescence intensity. Interactions among UiO-66-NH₂, MnO₂, OPs, and AA are clarified. Stepwise optimizations are performed to the UiO-66-NH₂/MnO₂ probe, ensuring considerable advantages as OPs affinity and fluorescence quenching behavior over rival nanomaterials. Analytical advances are magnified by fabricating an active sensor module, with self-acting thermal regulation for optimal enzyme activity. Under 4 and 20 °C environment, regulation period is less than 40 and 100 s. In total OPs determination for laboratorial and real-vegetable samples, this method exhibits uniform and log-linear responses to common species of OPs in a range as 1.0 × 10^-7~10 mg L^-1, and limit of detection is established as 8.9 × 10^-8 mg L^-1. Proposed readouts are validated with certified HPLC and recovery test. Relative errors and recovery rates are found as 2.7-6.4% and 95.8-102.6%, respectively.

Silver Nanowires as Electron Transfer Mediators in Electrochemical Catechol Biosensors

The integration of nanomaterials as electron mediators in electrochemical biosensors is taking on an essential role. Due to their high surface-to-volume ratio and high conductivity, metallic nanowires are an interesting option. In this paper, silver nanowires (AgNWs) were exploited to design a novel catechol electrochemical biosensor, and the benefits of increasing the aspect ratio of the electron mediator (nanowires vs. nanoparticles) were analyzed. Atomic force microscopy (AFM) studies have shown a homogeneous distribution of the enzyme along the silver nanowires, maximizing the contact surface. The large contact area promotes electron transfer between the enzyme and the electrode surface, resulting in a Limit of Detection (LOD) of 2.7 × 10⁻⁶ M for tyrosinase immobilized onto AgNWs (AgNWs-Tyr), which is one order of magnitude lower than the LOD of 3.2 × 10⁻⁵ M) obtained using tyrosinase immobilized onto silver nanoparticles (AgNPs-Tyr). The calculated K_M constant was 122 mM. The simultaneous use of electrochemistry and AFM has demonstrated a limited electrochemical fouling that facilitates stable and reproducible detection. Finally, the biosensor showed excellent anti-interference characteristics toward the main phenols present in wines including vanillin, pyrogallol, quercetin and catechin. The biosensor was able to successfully detect the presence of catechol in real wine samples. These results make AgNWs promising elements in nanowired biosensors for the sensitive, stable and rapid voltammetric detection of phenols in real applications.

Titanium carbide MXenes combined with red-emitting carbon dots as a unique turn-on fluorescent nanosensor for label-free determination of glucose

Titanium carbides (Ti3C2), a new family of two-dimensional (2D) nanomaterials, have attracted extensive attention due to their unique structure and desirable physiochemical properties. Herein, we developed an effective and selective fluorescent turn-on nanosensor for glucose detection based on Ti3C2 nanosheets combined with red-emitting carbon dots (RCDs). The fluorescence intensity of RCDs could be effectively quenched (>96%) by Ti3C2 nanosheets through the inner-filter effect (IFE). In the presence of H2O2, the quenched fluorescence of the RCDs can remarkably recover due to the Ti3C2 nanosheets which were oxidized into Ti(OH)4 by H2O2. Based on H2O2 generated from oxidation of glucose catalyzed by glucose oxidase, the nanosensor can also be exploited for monitoring glucose. Under optimal conditions, a linear relationship between the increased fluorescence intensity of RCDs and the concentration of glucose was established in the range from 0.1 to 20 mM. The detection limit was 50 μM (S/N = 3). The proposed nanosensor also represented excellent selectivity for glucose analysis in biological fluid samples, providing a valuable platform for glucose sensing in clinical diagnostics.

Exploration of Chitinous Scaffold-Based Interfaces for Glucose Sensing Assemblies

: The nanomaterial-integrated chitinous polymers have promoted the technological advancements in personal health care apparatus, particularly for enzyme-based devices like the glucometer. Chitin and chitosan, being natural biopolymers, have attracted great attention in the field of biocatalysts engineering. Their remarkable tunable properties have been explored for enhancing enzyme performance and biosensor advancements. Currently, incorporation of nanomaterials in chitin and chitosan-based biosensors are also widely exploited for enzyme stability and interference-free detection. Therefore, in this review, we focus on various innovative multi-faceted strategies used for the fabrication of biological assemblies using chitinous biomaterial interface. We aim to summarize the current development on chitin/chitosan and their nano-architecture scaffolds for interdisciplinary biosensor research, especially for analytes like glucose. This review article will be useful for understanding the overall multifunctional aspects and progress of chitin and chitosan-based polysaccharides in the food, biomedical, pharmaceutical, environmental, and other diverse applications.

Ionic Liquid-Polypyrrole-Gold Composites as Enhanced Enzyme Immobilization Platforms for Hydrogen Peroxide Sensing

In this work, three different aqueous solutions containing imidazole-based ILs with different alkyl chain lengths ([Cnmim]Br, n = 2, 6, 12) were adopted as the medium for the synthesis of ionic liquid-polypyrrole (IL-PPy) composites. Herein, the ILs undertook the roles of the pyrrole solvent, the media for emulsion polymerization of PPy and PPy dopants, respectively. The electrochemical performances of the three IL-PPy composites on a glassy carbon electrode (GCE) were investigated by electrochemical experiments, which indicated that [C12mim]Br-PPy (C12-PPy) composites displayed better electrochemical performance due to their larger surface area and firmer immobilization on the GCE. Further, C12-PPy/GCE were decorated with Au microparticles by electrodeposition that can not only increase the conductivity, but also immobilize sufficient biomolecules on the electrode. Then, the obtained C12-PPy-Au/GCE with outstanding electrochemical performance was employed as a horseradish peroxidase (HRP) immobilization platform to fabricate a novel C12-PPy-Au-HRP/GCE biosensor for H₂O₂ detection. The results showed that the prepared C12-PPy-Au-HRP/GCE biosensor exhibited high sensitivity, fast response, and a wide detection range as well as low detection limit towards H₂O₂. This work not only provides an outstanding biomolecule immobilization matrix for the fabrication of highly sensitive biosensors, but also advances the understanding of the roles of ILs in improving the electrochemical performance of biosensors.