A novel electrochemical aptasensor based on nontarget-induced high accumulation of methylene blue on the surface of electrode for sensing of α-synuclein oligomer

A Novel Methylene Blue Indicator-Based Aptasensor for Rapid Detection of Pseudomonas aeruginosa

Pseudomonas aeruginosa is a significant opportunistic pathogen highly prevalent in the environment, requiring early detection methods to prevent infections in vulnerable individuals. The most specific aptamer for P. aeruginosa, F23, has been used for the development of various assays and sensors for early diagnosis and monitoring. In this study, a novel F23-based electrochemical aptasensor was designed using disposal gold screen-printed electrodes (Au-SPEs) with high reproducibility. Methylene blue (MB) was used as an exogenous indicator, which significantly amplified the electrochemical signal and improved the sensitivity of detection. The aptasensor explored a limit of detection (LOD) of 8 CFU·mL-1 and high selectivity for P. aeruginosa over other interfering bacteria. Furthermore, it showed potential to detect P. aeruginosa in tap water samples, offering a point-of-care tool for rapidly controlling the growth of this bacterium in various applications.

Electrochemical biosensors in early detection of Parkinson disease

Parkinson's disease (PD) is a progressive neurodegenerative disorder affecting the motor system, with symptoms including tremors, rigidity, bradykinesia, and postural instability. Affecting over six million people globally, PD's pathophysiology is marked by the loss of dopaminergic neurons in the substantia nigra. Early diagnosis is crucial for effective management, yet current methods are limited by low sensitivity, high cost, and the need for advanced equipment. Electrochemical biosensors have emerged as promising tools for early PD diagnosis, converting biological reactions into measurable electrical signals for evaluating PD biomarkers. Advances in nanotechnology and material science have led to innovative sensing platforms with enhanced sensitivity and selectivity. Key biomarkers such as alpha-synuclein (α-syn), dopamine (DA), and microRNAs (miRNAs) have been targeted using these biosensors. For instance, gold nanoparticle-modified graphene immunosensors have shown ultra-sensitive detection of α-syn, while graphene-based biosensors have demonstrated high sensitivity for DA detection. Additionally, nanobiosensors for miR-195 and electrochemical aptasensors have shown potential for early PD diagnosis. The integration of nanomaterials like gold nanoparticles, quantum dots, and carbon nanotubes has further advanced the field, enhancing electrochemical activity and sensitivity. These developments offer a reliable, rapid, and cost-effective approach for early PD diagnosis, paving the way for better management and treatment. Continued research is essential for the commercialization and clinical integration of these biosensors, ultimately improving patient outcomes.

A hemin/rGO/MWCNT nanocomposite-based dual signal electrochemical aptasensor for sensitive detection of NSE

Neuron-specific enolase (NSE), a tumor marker of small cell lung cancer (SCLC), has high application value in the early diagnosis of SCLC. In this study, a dual signal electrochemical aptasensor for NSE was constructed based on hemin/reduced graphene oxide/multi-walled carbon nanotube (H-rGO-MWCNT) nanocomposites. Hemin played a dual role, functioning not only as an in situ electrochemical probe but also exhibiting excellent peroxidase-like properties, effectively catalyzing the electroreduction of H2O2. Reduced graphene oxide and multi-walled carbon nanotubes exhibited excellent conductivity. Through their binding with hemin, the nanocomposites achieved a larger specific surface area, providing numerous active sites for capturing the NSE aptamer. In the presence of NSE, the specific adsorption between the antigen and the aptamer formed a stable antigen-aptamer structure, which inhibited the performance of hemin, resulting in the weakening of the electrochemical signals of hemin and H2O2. Leveraging these characteristics, the sensitive and cost-effective dual-signal electrochemical aptasensor has been fabricated for the detection of NSE. One signal corresponded to differential pulse voltammetry (DPV) of hemin, while the other signal was derived from chronoamperometry, capturing the catalytic reduction of H2O2. The linear ranges for NSE were 1 pg mL-1 to 1 μg mL-1 and 100 pg mL-1 to 100 ng mL-1 with the limit of detection (LOD) of 0.21 pg mL-1 and 11.22 pg mL-1 by DPV and chronoamperometry, respectively. In addition, this aptasensor exhibited good reproducibility, stability and specificity. The recovery of NSE in human blood serum samples was from 89% to 131%. It provided a promising strategy for the detection of NSE in clinical diagnostics.

Biosensors for Parkinson's Disease: Where Are We Now, and Where Do We Need to Go?

Parkinson's Disease is the second most common neurological disease in the United States, yet there is no cure, no pinpointed cause, and no definitive diagnostic procedure. Parkinson's is typically diagnosed when patients present with motor symptoms such as slowness of movement and tremors. However, none of these are specific to Parkinson's, and a confident diagnosis of Parkinson's is typically only achieved when 60-80% of dopaminergic neurons are no longer functioning, at which point much of the damage to the brain is irreversible. This Perspective details ongoing efforts and accomplishments in biosensor research with the goal of overcoming these issues for Parkinson's diagnosis and care, with a focus on the potential impact of early diagnosis and associated opportunities to pinpoint a cause and a cure. We critically analyze the strengths and shortcomings of current technologies and discuss the ideal characteristics of a diagnostic technology toolbox to guide future research decisions in this space. Finally, we assess what role biosensors can play in facilitating precision medicine for Parkinson's patients.

Chitosan-enhanced sensitivity of mercaptoundecanoic acid (MUA)- capped gold nanorod based localized surface plasmon resonance (LSPR) biosensor for detection of alpha-synuclein oligomer biomarker in parkinson's disease

Alpha-synuclein oligomers play a crucial role in the early diagnosis of Parkinson's disease (PD). In this study, a mercaptoundecanoic acid (MUA)-capped gold nanorod (GNR)-coated and chitosan (CH)-immobilized fiber optic probe has shown considerable sensitivity of its detection. The proposed U-shaped fiber optic biosensor based on localized surface plasmon resonance (LSPR) was applied to detect α-syn oligomer (OA) biomarker. By analyzing OA concentrations, the biosensor achieved a limit of detection of (LOD) 11 pM within the concentration range of 10-100 pM and the sensitivity value was found as 502.69 Δλ/RIU. Upon analysis of the CV% (coefficient of variation) and accuracy/recovery values, it is revealed that the sensor successfully fulfilled the criteria for success, displaying accuracy/recovery values within the range of 80%-120% and CV% values below 20%. This sensor presents significant advantages, including high sensitivity, specificity, and ability to detect very low concentrations of OA. In conclusion, the suggested U-shaped fiber optic biosensor has the potential to be valuable in the early detection of PD from a clinical perspective.

Extension characteristics of TdT and its application in biosensors

The advantages of rapid amplification of nucleic acid without a template based on terminal deoxyribonucleotidyl transferase (TdT) have been widely used in the field of biosensors. However, the catalytic efficiency of TdT is affected by extension conditions. The sensitivity of TdT- mediated biosensors can be improved only under appropriate conditions. Therefore, in this review, we provide a comprehensive overview of TdT extension characteristics and its applications in biosensors. We focus on the relationship between TdT extension conditions and extension efficiency. Furthermore, the construction strategy of TdT-mediated biosensors according to five different recognition types and their applications in targets are discussed and, finally, several current challenges and prospects in the field are taken into consideration.

Light-Driven Electrochemical Biosensing with DNA Origami-Assisted Hybrid Nanoantenna for Fumonisin B1 Monitoring

The electrochemical detection of biosensors is largely governed by the changes in physical properties of redox probes, which are susceptible to electrode substrate effects, inhibiting sensor sensitivity. In this work, a light-driven electrochemical biosensor based on a hybrid nanoantenna was developed for the sensitive detection of fumonisin B1 (FB1). The hybrid nanoantenna sensing interface was constructed by coupling CdSe quantum dots (QDs)-DNA nanowire and graphdiyne oxide composites loaded with methylene blue and gold nanorods (GDYO-MB-Au NRs) using a tetrahedral DNA nanostructure, which acted as a light-driven unit and an amplification unit, respectively. The hybrid nanoantenna with light-driven properties facilitated the alteration in the chemical properties of MB at the sensing interface; that is, MB was degraded under light illumination. The stripping of the CdSe QDs-DNA nanowire triggered by the binding of FB1 could degrade the light-driven capability, thereby improving the electrochemical signal through depressing MB degradation. Taking advantage of the photodegradation of MB by the hybrid nanoantenna, the developed biosensor reduced the background signal and increased the detection sensitivity. The developed biosensor exhibited a linear detection range from 0.5 fg mL-1 to 10 pg mL-1 and a detection limit down to 0.45 fg mL-1. This strategy shows great promise for the fabrication of highly sensitive electrochemical biosensors.

Photodynamic-Assisted Electrochemiluminescence Enhancement toward Advanced BODIPY for Precision Diagnosis of Parkinson

Nowadays, signal enhancement is imperative to increase sensitivity of advanced ECL devices for expediting their promising applications in clinic. In this work, photodynamic-assisted electrochemiluminescence (PDECL) device was constructed for precision diagnosis of Parkinson, where an advanced emitter was prepared by electrostatically linking 2,6-dimethyl-8-(3-carboxyphenyl)4,4'-difluoroboradiazene (BET) with 1-butyl-3-methylimidazole tetrafluoroborate ([BMIm][BF4]). Specifically, protoporphyrin IX (PPIX) can trigger the photodynamic reaction under light irradiation with a wavelength of 450 nm to generate lots of singlet oxygen (1O2), showing a 2.43-fold magnification in the ECL responses. Then, the aptamer (Apt) was assembled on the functional BET-[BMIm] for constructing a "signal off" ECL biosensor. Later on, the PPIX was embedded into the G-quadruplex (G4) of the Apt to magnify the ECL signals for bioanalysis of α-synuclein (α-syn) under light excitation. In the optimized surroundings, the resulting PDECL sensor has a broad linear range of 100.0 aM ∼ 10.0 fM and a low limit of detection (LOD) of 63 aM, coupled by differentiating Parkinson patients from normal individuals according to the receiver operating characteristic (ROC) curve analysis of actual blood samples. Such research holds great promise for synthesis of other advanced luminophores, combined with achieving an early clinical diagnosis.

An α-helical peptide-based plasmonic biosensor for highly specific detection of α-synuclein toxic oligomers

BACKGROUND

α-Synuclein (αS) aggregation is the main neurological hallmark of a group of neurodegenerative disorders, collectively referred to as synucleinopathies, of which Parkinson's disease (PD) is the most prevalent. αS oligomers are elevated in the cerebrospinal fluid (CSF) of PD patients, standing as a biomarker for disease diagnosis. However, methods for early PD detection are still lacking. We have recently identified the amphipathic 22-residue peptide PSMα3 as a high-affinity binder of αS toxic oligomers. PSMα3 displayed excellent selectivity and reproducibility, binding to αS toxic oligomers with affinities in the low nanomolar range and without detectable cross-reactivity with functional monomeric αS.

RESULTS

In this work, we leveraged these PSMα3 unique properties to design a plasmonic-based biosensor for the direct detection of toxic oligomers under label-free conditions.

SIGNIFICANCE AND NOVELTY

We describe the integration of the peptide in a lab-on-a-chip plasmonic platform suitable for point-of-care measurements of αS toxic oligomers in CSF samples in real-time and at an affordable cost, providing an innovative biosensor for PD early diagnosis in the clinic.

Proximity hybridization induced molecular machine for signal-on electrochemical detection of α-synuclein oligomers

α-synuclein oligomer is a marker of Parkinson's disease. The traditional enzyme-linked immunosorbent assay for α-synuclein oligomer detection is not conducive to large-scale application due to its time-consuming, high cost and poor stability. Recently, DNA-based biosensors have been increasingly used in the detection of disease markers due to their high sensitivity, simplicity and low cost. In this study, based on the DNAzyme-driven DNA bipedal walking method, we developed a signal-on electrochemical sensor for the detection of α-syn oligomers. Bipedal DNA walkers have a larger walking area and faster walking kinetics, providing higher amplification efficiency compared to conventional DNA walkers. The DNA walker is driven via an Mg2+-dependent DNAzyme, and the binding-induced DNA walker will continuously clamp the MB, resulting in the proliferation of Fc confined near the GE surface. The linear range and limit of detection were 1 fg/mL to 10 pg/mL and 0.57 fg/mL, respectively. The proposed signal-on electrochemical sensing strategy is more selective. It will play a significant role in the sensitive and precise electrochemical analysis of other proteins.

An innovative transportable immune device for the recognition of α-synuclein using KCC-1-nPr-CS2 modified silver nano-ink: integration of pen-on-paper technology with biosensing toward early-stage diagnosis of Parkinson's disease

Parkinson's disease (PD), the second most frequent neurodegenerative illness, is a neurological ailment that produces unintentional or uncontrolled body movements, which should be diagnosed in its early stages to hinder the progression. Monitoring the concentration of α-synuclein (α-Syn) in body fluids can be one of the most efficient ways for PD early detection. In this work, a paper-based electrochemical immunosensor was designed for α-Syn bio-assay in human plasma samples based on encapsulation of the biotinylated antibody on novel dendritic fibrous nanosilica ((KCC-1-nPr-CS2)-Ab). For this purpose, a three-electrode system was prepared using stabilization of silver nano-ink on photographic paper. Then, the (KCC-1-NH-CS2)-Ab was immobilized on its surface and used to detect the target antigen (α-Syn). After characterization of the prepared substrate by FE-SEM and EDS, the redox behavior of the biosensor was evaluated using chronoamperometry techniques. Under optimal experimental conditions and using a label-free strategy, the engineered immunosensor showed a linear relationship between peak current and antigen concentration in the linear range from 0.002 to 128 ng mL-1 with the lower limit of quantification of 0.002 ng mL-1. Moreover, this work involves unprecedented use of conductive nano-inks for the manufacture of α-Syn immunosensor, which is aided by the use of a mesoporous silicate dendrimer in encapsulating the α-Syn antibody, thus offering a robust and simple point-of-care device for early PD diagnosis. The ability of the proposed platform to detect small amounts of α-Syn offers a promising approach to developing low-cost, sensitive, and transportable biosensors for Parkinson's disease screening in its early stages.

An innovative method for the detection of alpha synuclein, a potential biomarker of Parkinson's disease: quartz tuning fork-based mass sensitive immunosensor design

An innovative biosensing fabrication strategy has been demonstrated for the first time using a quartz tuning fork (QTF) to develop a practical immunosensor for sensitive, selective and practical analysis of alpha synuclein protein (SYN alpha), a potential biomarker of Parkinson's disease. Functionalization of gold-coated QTFs was carried out in 2 steps by forming a self-assembled monolayer with 4-aminothiophenol (4-ATP) and conjugation of gold nanoparticles (AuNPs). The selective determination range for SYN alpha of the developed biosensor system is 1-500 ng mL-1 in accordance with the resonance frequency shifts associated with a limit of detection of 0.098 ng mL-1. The changes in surface morphology and elemental composition were evaluated using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and energy-dispersive X-ray spectroscopy (EDX). The remarkable point of the study is that this QTF based mass sensitive biosensor system can capture the SYN alpha target protein in cerebrospinal fluid (CSF) samples with recoveries ranging from 92% to 104%.

Lab-made disposable screen-printed electrochemical sensors and immunosensors modified with Pd nanoparticles for Parkinson's disease diagnostics

A new conductive ink based on the addition of carbon black to a poly(vinyl alcohol) matrix is developed and investigated for electrochemical sensing and biosensing applications. The produced devices were characterized using morphological and electrochemical techniques and modified with Pd nanoparticles to enhance electrical conductivity and reaction kinetics. With the aid of chemometrics, the parameters for metal deposition were investigated and the sensor was applied to the determination of Parkinson's disease biomarkers, specifically epinephrine and α-synuclein. A linear behavior was obtained in the range 0.75 to 100 μmol L-1 of the neurotransmitter, and the device displayed a limit of detection (LOD) of 0.051 μmol L-1. The three-electrode system was then tested using samples of synthetic cerebrospinal fluid. Afterward, the device was modified with specific antibodies to quantify α-synuclein using electrochemical impedance spectroscopy. In phosphate buffer, a linear range was obtained for α-synuclein concentrations from 1.5 to 15 μg mL-1, with a calculated LOD of 0.13 μg mL-1. The proposed immunosensor was also applied to blood serum samples, and, in this case, the linear range was observed from 6.0 to 100.5 μg mL-1 of α-synuclein, with a LOD = 1.3 µg mL-1. Both linear curves attend the range for the real diagnosis, demonstrating its potential application to complex matrices.

Target-Induced Electrochemical Sensor Based on Foldable Aptamer and MoS2@MWCNTs-PEI for Enhanced Detection of AFB1 in Peanuts

Herein, a sensitive and selective electrochemical sensor based on aptamer folding was constructed to detect aflatoxin B1 (AFB1) in peanuts. Specifically, polyethylenimine-functionalized multiwalled carbon nanotubes modified with molybdenum disulfide (MoS2@MWCNTs-PEI) were used as the electrode matrix to enable a large specific surface area, which were characterized by the Randles-Sevcik equation. Additionally, AuNPs were used to immobilize the aptamer via the Au-S covalent bond and provide a favorable microenvironment for signal enhancement. Methylene blue (MB) was modified at the proximal 3' termini of the aptamer as the capture probe, while the signal transduction of the sensor was obtained through changes in conformation and position of MB induced by the binding between AFB1 and the probe. Changes in spatial conformation could be recorded by electrochemical methods more readily. This electrochemical aptasensor demonstrated remarkable sensitivity to AFB1 with an extensive detection range (1 pg/mL to 100 ng/mL) and a lower limit detection (1.0 × 10-3 ng/mL). Moreover, using the constructed aptasensor, AFB1 was identified successfully in peanut samples, with recoveries ranging from 95.83 to 107.53%, illustrating its potential use in determining AFB1 in food.

Surface immobilization strategies for the development of electrochemical nucleic acid sensors

Following the recent pandemic and with the emergence of cell-free nucleic acids in liquid biopsies as promising biomarkers for a broad range of pathologies, there is an increasing demand for a new generation of nucleic acid tests, with a particular focus on cost-effective, highly sensitive and specific biosensors. Easily miniaturized electrochemical sensors show the greatest promise and most typically rely on the chemical functionalization of conductive materials or electrodes with sequence-specific hybridization probes made of standard oligonucleotides (DNA or RNA) or synthetic analogues (e.g. Peptide Nucleic Acids or PNAs). The robustness of such sensors is mostly influenced by the ability to control the density and orientation of the probe at the surface of the electrode, making the chemistry used for this immobilization a key parameter. This exhaustive review will cover the various strategies to immobilize nucleic acid probes onto different solid electrode materials. Both physical and chemical immobilization techniques will be presented. Their applicability to specific electrode materials and surfaces will also be discussed as well as strategies for passivation of the electrode surface as a way of preventing electrode fouling and reducing nonspecific binding.

A review of the current research on in vivo and in vitro detection for alpha-synuclein: a biomarker of Parkinson's disease

Parkinson's disease is a health-threatening neurodegenerative disease of the elderly with clinical manifestations of motor and non-motor deficits such as tremor palsy and loss of smell. Alpha-synuclein (α-Syn) is the pathological basis of PD, it can abnormally aggregate into insoluble forms such as oligomers, fibrils, and plaques, causing degeneration of nigrostriatal dopaminergic neurons in the substantia nigra in the patient's brain and the formation of Lewy bodies (LBs) and Lewy neuritis (LN) inclusions. As a result, achieving α-Syn aggregate detection in the early stages of PD can effectively stop or delay the progression of the disease. In this paper, we provide a brief overview and analysis of the molecular structures and α-Syn in vivo and in vitro detection methods, such as mass spectrometry, antigen-antibody recognition, electrochemical sensors, and imaging techniques, intending to provide more technological support for detecting α-Syn early in the disease and intervening in the progression of Parkinson's disease.

Sensitive electrochemical recognition of α-synuclein protein in human plasma samples using bioconjugated gold nanoparticles: An innovative immuno-platform to assist in the early stage identification of Parkinson's disease by biosensor technology

This research work explains the development of an electrochemical immunosensor for the selective recognition of SNCA in human biofluids. An innovative protocol was proposed for the green synthesis of gold nanoparticle-supported dimethylglyoxime (AuNPs@DMGO) using one-step electrogeneration method. Also, the application of AuNPs@DMGO for the sensitive quantification of α-Synuclein (SNCA) protein and its biomedical analysis. So, an innovative sandwich immunosensor was designed for the sensitive identification of SNCA antigen in an aqueous solution. The gold nanoparticles (AuNPs) were decorated on the surface of the glassy carbon electrode by chronoamperometry technique to provide appropriate immobilization surface with a large number of active sites for immobilization of specific biotinylated antibody (Ab1) and against SNCA protein. Then, the sandwich-type immuno-platform was completed by the attachment of secondary antibody (HRP conjugated Ab [Ab2]) to the primary complexes on the surface of the electrode. For the first time, α-Synuclein protein was measured with an acceptable linear range of 4-64 ng/mL and a lower limit of quantification of 4 ng/mL. Benefiting from the simplicity and high sensitivity, the proposed method shows a potential of employment in clinical applications and high-throughput screening of Parkinson's disease using POC.

Metal-Organic Frameworks as Sensors for Human Amyloid Diseases

Metal-organic frameworks (MOFs) are versatile compounds with emergent applications in the fabrication of biosensors for amyloid diseases. They hold great potential in biospecimen protection and unprecedented probing capabilities for optical and redox receptors. In this Review, we summarize the main methodologies employed in the fabrication of MOF-based sensors for amyloid diseases and collect all available data in the literature related to their performance (detection range, limit of detection, recovery, time of analysis, among other parameters). Nowadays, MOF sensors have evolved to a point where they can, in some cases, outperform technologies employed in the detection of several amyloid biomarkers (amyloid β peptide, α-synuclein, insulin, procalcitonin, and prolactin) present in biological fluids, such as cerebrospinal fluid and blood. A special emphasis has been given by researchers on Alzheimer's disease monitoring to the detriment of other amyloidosis that are underexploited despite their societal relevance (e.g., Parkinson's disease). There are still important obstacles to overcome in order to selectively detect the various peptide isoforms and soluble amyloid species associated with Alzheimer's disease. Furthermore, MOF contrast agents for imaging peptide soluble oligomers in living humans are also scarce (if not nonexistent), and action in this direction is unquestionably required to clarify the contentious link between the amyloidogenic species and the disease, guiding research toward the most promising therapeutic strategies.

Inhibition of α-Synuclein Seeding-Dependent Aggregation by ssDNA Aptamers Specific to C-Terminally Truncated α-Synuclein Fibrils

Neuropathologically, Parkinson's disease (PD) and dementia with Lewy bodies (DLB) are characterized by the accumulation of insoluble aggregates of α-synuclein (α-syn) in the Lewy bodies (LBs). In addition to full-length α-syn fibrils, C-terminally truncated α-syn is also abundant in the LBs that acts as seeds and facilitates the aggregation of the full-length α-syn in vitro and in vivo and induces toxicity. Hence, identifying molecules that can inhibit the seeding activity of these truncated forms is of great importance. Here, we report the first in vitro selection of aptamers targeting the fibrillar forms of different C-terminally truncated α-syn using systematic evolution by an exponential enrichment method followed by quantitative high-throughput DNA sequencing. We identify a panel of aptamers that bound with high specificity to different truncated forms of α-syn fibrils with no cross-reactivity toward other amyloid fibrils. Interestingly, two of the aptamers (named Apt11 and Apt15) show higher affinity to most C-terminally truncated forms of α-syn fibrils with an evident inhibition of α-syn-seeded aggregation in vitro by Apt11. This inhibition is further confirmed by circular dichroism, Congo red binding assay, and electronic microscopy. Moreover, Apt11 is also found to reduce the insoluble phosphorylated form of α-syn at Ser-129 (pS129-α-syn) in the cell model and also can inhibit α-syn aggregation using RT-QuIC reactions seeded with brain homogenates extracted from patients affected by PD. The aptamers discovered in this study represent potential useful tools for research and diagnostics or therapy toward PD and DLB.

Gold nanourchin enhances detection of Alzheimer's disease biomarker "miRNA-137" on dual electrode sensing surface

Diagnosis of Alzheimer's disease (AD) is a complex task, and at present, neuroimaging such as magnetic resonance imaging and positron emission tomography is commonly used for the diagnosis of AD. This research work developed a new biosensing method with gold nanomaterial to identify AD biomarker of miRNA-137. Gold nanourchin (GNU) was attached on the interdigitated electrode through the silane linker and COOH-ended capture oligonucleotide was immobilized on the GNU surface. This surface helps to quantify the target sequence of miRNA-137 and the detection limit reached to 0.01 pM on the linear range of 0.01-100 pM. With 3δ calculation on the linearity, the determination coefficient was noticed as y = 1.2867x - 2.2697; R²  = 0.9059. The control performances did not show a significant response, indicating the specific identification of target.

Efficient Entrapment of Alpha-Synuclein Biotinylated Antibody in KCC-1-NH-CS2 and Application for the Sensitive Diagnosis of Parkinson's Using Recognition of Biomarker: An Innovative Electrochemical Label-Free Immunosensor for the Biomedical Analysis of Neurodegenerative Diseases

The early detection of Parkinson's disease (PD) is a critical issue in terms of efficiency. Alpha-synuclein (α-Syn) is a biomarker in PD checks. Alpha-synuclein (α-syn) is the major constituent of Lewy bodies and a pathogenic hallmark of all synucleinopathies, including PDs, dementia with Lewy bodies, and multiple system atrophy. In this study, KCC-1-NH-CS₂ was conjugated with biotinylated Ab and entrapped in P(β-CD) polymer cavities. Using this approach, a novel electrochemical label-free immunosensor was designed for the quantification of α-syn in real human samples. For this purpose, the glassy carbon electrode electropolymerized with P(β-CD) biopolymer provided an excellent matrix for entrapping of KCC-1-NH-CS₂ loaded with the biotinylated antibody of α-syn. Using the chronoamperometric technique, the proposed immunosensor shows a suitable range of 0.02 to 64 ng/mL for the determination of α-syn. Additionally, a low limit of quantification of the engineered biosensor was obtained at 0.02 ng/mL. The developed immunosensor's adequate stability, sensitivity, and selectivity, together with its ease of manufacture, make it a promising diagnostic technique for further research. This study also will pave the way for further applications of the synergetic effect of β-CD and KCC-1-NH-CS₂ for biomedical analysis in the near future.

Recent Advances in Electrochemical Aptasensors for Detection of Biomarkers

The early diagnosis of diseases is of great importance for the effective treatment of patients. Biomarkers are one of the most promising medical approaches in the diagnosis of diseases and their progress and facilitate reaching this goal. Among the many methods developed in the detection of biomarkers, aptamer-based biosensors (aptasensors) have shown great promise. Aptamers are promising diagnostic molecules with high sensitivity and selectivity, low-cost synthesis, easy modification, low toxicity, and high stability. Electrochemical aptasensors with high sensitivity and accuracy have attracted considerable attention in the field of biomarker detection. In this review, we will summarize recent advances in biomarker detection using electrochemical aptasensors. The principles of detection, sensitivity, selectivity, and other important factors in aptasensor performance are investigated. Finally, advantages and challenges of the developed aptasensors are discussed.

A FRET-based aptasensor for the detection of α-synuclein oligomers as biomarkers of Parkinson's disease

Soluble oligomers of α-synuclein (α-syn) are known to be responsible for neuronal death in the early stages of Parkinson's disease (PD). Thus, the development of a simple, rapid, and inexpensive method for the detection of α-syn oligomers can help PD diagnosis before irreversible damage to the brain tissue occurs. The present study is aimed at developing a FRET-based aptasensor for the selective and sensitive detection of α-syn oligomers. Herein, FAM-labeled aptamer adsorption on graphene oxide (GO) resulted in fluorescence quenching of FAM. The binding of α-syn oligomers to the aptamer led to the recovery of the fluorescence intensity. Under optimized conditions, the developed biosensor showed two linear response ranges from 10-100 nM and 250 nM to 2 μM in α-syn oligomer detection. The limit of detection (LOD) and limit of quantification (LOQ) were calculated to be 6.3 nM and 19.3 nM, respectively. Furthermore, the performance of the sensing platform in the detection of the target analyte in biological matrices was demonstrated by the assay of α-syn oligomers in spiked human saliva samples. According to the obtained results, this sensing platform has a good performance for α-syn oligomer detection and it can be considered as a promising candidate for the early diagnosis of PD.

Current Progress in Aptasensor for Ultra-Low Level Monitoring of Parkinson's Disease Biomarkers

In today's world, Parkinson's disease (PD) has been introduced as a long-term degenerative disorder of the central nervous system which mainly affects approximately more than ten million people worldwide. The vast majority of diagnostic methods for PD have operated based on conventional sensing platforms, while the traditional laboratory tests are not efficient for diagnosis of PD in the early stage due to symptoms of this common neurodegenerative syndrome starting slowly. The advent of the aptasensor has revolutionized the early-stage diagnosis of PD by measuring related biomarkers due to the myriad advantages of originating from aptamers which can be able to sensitive and selective capture various types of related biomarkers. The progress of numerous sensing platforms and methodologies in terms of biosensors based on aptamer application for PD diagnosis has revealed promising results. In this review, we present the latest developments in myriad types of aptasensors for the determination of related PD biomarkers. Working strategies, advantages and limitations of these sensing approaches are also mentioned, followed by prospects and challenges.

Electrochemical Aptasensors for Parkinson's Disease Biomarkers Detection

BACKGROUND

Biomarkers are characteristic molecules that can be measured as indicators of biological process status or condition, exhibiting special relevance in Parkinson's Disease (PD). This disease is a chronic neurodegenerative disorder very difficult to study given the site of pathology and due to a clinical phenotype that fluctuates over time. Currently there is no definitive diagnostic test, thus clinicians hope that the detection of crucial biomarkers will help to the symptomatic and presymptomatic diagnostics and providing surrogate endpoints to demonstrate the clinical efficacy of new treatments.

METHODS

Electrochemical aptasensors are excellent analytical tools that are used in the detection of PD biomarkers, as they are portable, easy to use, and perform real-time analysis.

RESULTS

In this review, we discuss the most important clinical biomarkers for PD, highlighting their physiological role and function in the disease. Herein, we review for the first time innovative aptasensors for the detection of current potential PD biomarkers based on electrochemical techniques and discuss future alternatives, including ideal analytical platforms for point-of-care diagnostics.

CONCLUSION

These new tools will be critical not only in the discovery of sensitive, specific, and reliable biomarkers of preclinical PD, but also in the development of tests that can assist in the early detection and differential diagnosis of parkinsonian disorders and in monitoring disease progression. Various methods for fixing aptamers onto the sensor surfaces, enabling quantitative and specific PD biomarker detection present in synthetic and clinical samples, will also be discussed.

Aptamers Targeting Hallmark Proteins of Neurodegeneration

Neurodegeneration is a progressive deterioration of neural structures leading to cognitive or motor impairment of the affected patient. There is still no effective therapy for any of the most common neurodegenerative diseases (NDs) such as Alzheimer's or Parkinson's disease. Although NDs exhibit distinct clinical characteristics, many are characterized by the accumulation of misfolded proteins or peptide fragments in the brain and/or spinal cord. The presence of similar inclusion bodies in patients with diverse NDs provides a rationale for developing therapies directed at overlapping disease mechanisms. A novel targeting strategy involves the use of aptamers for therapeutic development. Aptamers are short nucleic acid ligands able to recognize molecular targets with high specificity and high affinity. Despite the fact that several academic groups have shown that aptamers have the potential to be used in therapeutic and diagnostic applications, their clinical translation is still limited. In this study, we describe aptamers that have been developed against proteins relevant to NDs, including prion protein and amyloid beta (Aβ), cell surface receptors and other cytoplasmic proteins. This review also describes advances in the application of these aptamers in imaging, protein detection, and protein quantification, and it provides insights about their accelerated clinical use for disease diagnosis and therapy.

A highly sensitive electrochemical aptasensor for cocaine detection based on CRISPR-Cas12a and terminal deoxynucleotidyl transferase as signal amplifiers

Cocaine is one of the mainly used illegal drugs in the world. Using the signal amplification elements of terminal deoxynucleotidyl transferase (TdT) and CRISPR-Cas12a, a highly sensitive and simple electrochemical aptasensor was introduced for cocaine quantification. When, no cocaine existed in the sample, the 3'-end of complementary strand of aptamer (CS) was extended by TdT, leading to the activation of CRISPR-Cas12a and remaining of very short oligonucleotides on the working electrode. So, the current signal was remarkably promoted. With the presence of cocaine, CS left the electrode surface. Thus, nothing changed following the incubation of TdT and CRISPR-Cas12a and the Aptamer/Cocaine complex presented on the electrode. Consequently, the [Fe(CN)₆]^3-/4- could not freely reach the electrode surface and the signal response was weak. Under optimal situations, the biosensor revealed a wide linear relation from 40 pM to 150 nM with detection limit of 15 pM for cocaine. The sensitivity of the analytical system was comparable and even better than other reported methods for cocaine detection. The designed method displayed excellent cocaine selectivity. The aptasensor could work well for cocaine assay in serum samples. So, the aptasensor is expected to be an efficient analytical method with broad applications in the determination of diverse analytes.

Sensitive immunosensing of α-synuclein protein in human plasma samples using gold nanoparticles conjugated with graphene: an innovative immuno-platform towards early stage identification of Parkinson's disease using point of care (POC) analysis

Parkinson's disease (PD) or simply Parkinson's is a long-term degenerative disorder of the central nervous system, which mainly affects the motor system. Consequently, the detection and quantification of related biomarkers play vital roles in the early-stage diagnosis of PD. In the present study, an innovative electrochemical immunosensor based on gold nanoparticle-modified graphene towards bioconjugation with biotinylated antibody (bioreceptor) was developed for the ultra-sensitive and specific monitoring of the alpha-synuclein (α-synuclein) protein. The synergistic effects between the gold nanoparticles (AuNPs) and graphene drastically enhanced the electrochemical activity of the resulting materials. The enhanced conductivity of the substrate together with the increase in its surface area improved the sensitivity and lowered the detection limit of the capture layer. For the first time, the α-synuclein protein was measured in human plasma samples using bioconjugated AuNP-Gr bioconjugated specific antibody with an acceptable linear range of 4 to 128 ng mL-1 and a lower limit of quantification (LLOQ) of 4 ng mL-1. Accordingly, it is expected that this diagnostic method may be produced in the near future for clinical applications and high-throughput screening of PD using point of care (POC) analysis.

Construction of Electrochemical Aptamer Sensor Based on Pt-Coordinated Titanium-Based Porphyrin MOF for Thrombin Detection

In this work, a Pt-coordinated titanium-based porphyrin metal organic framework (Ti-MOF-Pt) was prepared by embedding single-atom Pt through strong interactions between the four pyrrole nitrogen atoms in the rigid backbone of the porphyrin. The synthesized Ti-MOF-Pt was characterized by TEM, XRD, FTIR and BET. Then, the Ti-MOF-Pt has been used for glassy carbon electrode surface modification and consequently used for construction of a thrombin aptamer sensor. The high surface area provides by MOF and excellent electrochemical property provided by Pt enhance the sensing performance. After optimization of amount of aptamer, hybridization time and specific reaction time, the fabricated aptamer sensor exhibited a linear relationship with the logarithm of the thrombin concentration in the range of 4 pM to 0.2 μM. The detection limit can be calculated as 1.3 pM.

Aptamer Applications in Neuroscience

Being the predominant cause of disability, neurological diseases have received much attention from the global health community. Over a billion people suffer from one of the following neurological disorders: dementia, epilepsy, stroke, migraine, meningitis, Alzheimer's disease, Parkinson's disease, multiple sclerosis, amyotrophic lateral sclerosis, Huntington's disease, prion disease, or brain tumors. The diagnosis and treatment options are limited for many of these diseases. Aptamers, being small and non-immunogenic nucleic acid molecules that are easy to chemically modify, offer potential diagnostic and theragnostic applications to meet these needs. This review covers pioneering studies in applying aptamers, which shows promise for future diagnostics and treatments of neurological disorders that pose increasingly dire worldwide health challenges.

Development of Electrochemical Aptasensor for Lung Cancer Diagnostics in Human Blood

We describe the preparation and characterization of an aptamer-based electrochemical sensor to lung cancer tumor markers in human blood. The highly reproducible aptamer sensing layer with a high density (up to 70% coverage) on the gold electrode was made. Electrochemical methods and confocal laser scanning microscopy were used to study the stability of the aptamer layer structure and binding ability. A new blocking agent, a thiolated oligonucleotide with an unrelated sequence, was applied to fill the aptamer layer’s defects. Electrochemical aptasensor signal processing was enhanced using deep learning and computer simulation of the experimental data array. It was found that the combinations (coupled and tripled) of cyclic voltammogram features allowed for distinguishing between the samples from lung cancer patients and healthy candidates with a mean accuracy of 0.73. The capacitive component from the non-Faradic electrochemical impedance spectroscopy data indicated the tumor marker’s presence in a sample. These findings allowed for the creation of highly informative aptasensors for early lung cancer diagnostics.

Sensitive electrochemical aptasensor for determination of sulfaquinoxaline based on AuPd NPs@UiO-66-NH2/CoSe2 and RecJf exonuclease-assisted signal amplification

The authors designed a sensitive label-free electrochemical aptasensor for the detection of sulfaquinoxaline (SQX), including the AuPd NPs@UiO-66-NH₂/CoSe₂ nanocomposites and RecJf exonuclease-assisted target recycle signal amplification strategy. AuPd NPs@UiO-66-NH₂/CoSe₂ nanocomposite with excellent conductivity and numerous active sites was successfully synthesized to provide a favorable sensing platform and load more double-strand DNA (dsDNA) on the electrode surface. The negatively charged phosphate group of the oligonucleotide and [Fe (CN)₆] ^3-/4- repel each other electrostatically, resulting in very low electrical signals. In the presence of SQX, its corresponding aptamer will be released from the double-stranded structure and then digested by RecJf exonuclease, which resulted in the SQX being released to initiate the next recycling to help amplify the DPV signal. Under the optimal conditions, the peak current has a linear relationship with the logarithmic of SQX concentration in the range of 1 pg/mL∼100 ng/mL and the obtained detection limit was 0.547 pg/mL. Furthermore, the contrasted aptasensor possess reliable specificity, reproducibility and stability toward SQX, and has been applied to detect SQX in pork samples with a satisfied recovery varied from 94.40% to 95.98%.

RuCu Cage/Alloy Nanoparticles with Controllable Electroactivity for Specific Electroanalysis Applications

Electrochemical nanotags with controllable and multiresponse electroactivity have a great capacity for overcoming the drawbacks of limited target monitoring and inaccurate detection results for electrochemical sensors. In this contribution, double electro-oxidative Ru and Cu metals were integrated into RuCu nanostructures for the generation of dual electro-oxidative signals. A facial approach was proposed for the controllable fabrication of RuCu cage nanoparticles (NPs) and RuCu alloy NPs by simply adjusting the pH value of the reaction system. RuCu cage NPs and RuCu alloy NPs demonstrated inherent different electro-oxidative responses owing to the remarkable distinction of structures with different metal valences. RuCu cage NPs showed a single electro-oxidization peak at 0.84 V, assigned to the exposure of more Ru⁰ electroactive sites on the hollow cage structures. RuCu alloy NPs illustrated dual electro-oxidization peak at 0.84 and -0.16 V, attributing to the presence of Ru⁰ and Cu⁺ electroactive sites on the alloy structures, respectively. RuCu cage NPs and RuCu alloy NPs served as specific electroactive tags, achieving the selective monitoring of Na₂S and ratiometric electrochemical detection of xanthine in monosodium glutamate, respectively. The limits of detection were as low as 27 pM for Na₂S and 70 nM for xanthine. The rational design of multimetal nanostructures holds enormous potential for the generation of multiresponse electroactivity with the impetus for exploring the capacity of specific electrochemical sensing.

Liposomal Controlled Release Ag-Activated DNAzyme Cycle Amplification on a 2D Pyrene COF-Based Photocathode for α-Synuclein Immunosensing

Ultrasensitive and accurate monitoring of ultralow-level biomarkers is imperiously needed in clinical diagnosis. So far, exploring high-performance photocathodes and developing new sensing strategies have remained central challenges in photoelectrochemical bioassays. Herein, a two-dimensional (2D) pyrene covalent organic framework (COF, PAF-130) is exemplified for the first time as a high-performance photocathode for precise immunosensing of α-synuclein (α-Syn) by integrating a DNAzyme-induced signal cycle amplification strategy with Ag nanoparticles (NPs)-mediated liposomal immunoassay. Through sequential immunobinding, lysis treatment, and acidolysis, numerous Ag⁺ ions are released, and then they activate the DNAzyme, which further recycles the cleavage of hairpin DNA (HDNA) on the photoelectrode and induces signal cycle amplification. As a result, an ultralow detection limit (3.6 fg/mL) and a wide linear range (10^-5-10³ ng/mL) are achieved, which surpass those of most methods reported so far. The proposed sensing approach can be readily extended to detect various biomarkers by substituting the biorecognition events, providing great promise for biomedical and related applications.

A Methylene Blue Assisted Electrochemical Sensor for Determination of Drug Resistance of Escherichia coli

Due to the abuse of antibiotics in clinical, animal husbandry, and aquaculture, drug-resistant pathogens are produced, which poses a great threat to human and the public health. At present, a rapid and effective drug sensitivity test method is urgently needed to effectively control the spread of drug-resistant bacteria. Using methylene blue as a redox probe, the electrochemical signals of methylene blue in drug-resistant Escherichia coli strains were analyzed by a CV method. Graphene ink has been used for enhancing the electrochemical signal. Compared with the results of the traditional drug sensitivity test, we proposed a rapid electrochemical drug sensitivity test method which can effectively identify the drug sensitivity of Escherichia coli. The sensitivity of four E. coli isolates to ciprofloxacin, gentamicin, and ampicillin was tested by an electrochemical drug sensitivity test. The respiratory activity value %RA was used as an indicator of bacterial resistance by electrochemical method.

Transition metal dichalcogenides to optimize the performance of peptide-imprinted conductive polymers as electrochemical sensors

Molecularly imprinted polymer (MIP)-based electrochemical sensors for the protein α-synuclein (a marker for Parkinson's disease) were developed using a peptide epitope from the protein. MIPs doped with various concentrations and species of transition metal dichalcogenides (TMDs) to enhance conductivity were electropolymerized with and without template molecules. The current during the electropolymerization was compared with that associated with the electrochemical response (at 0.24~0.29 V vs. ref. electrode) to target peptide molecules in the finished sensor. We found that this relationship can aid in the rational design of conductive MIPs for the recognition of biomarkers in biological fluids. The sensing range and limit of detection of TMD-doped imprinted poly(AN-co-MSAN)-coated electrodes were 0.001-100 pg/mL and 0.5 fg/mL (SNR = 3), respectively. To show the potential applicability of the MIP electrochemical sensor, cell culture medium from PD patient-specific midbrain organoids generated from induced pluripotent stem cells was analyzed. α-Synuclein levels were found to be significantly reduced in the organoids from PD patients, compared to those generated from age-matched controls. The relative standard deviation and recovery are less than 5% and 95-115%, respectively. Preparation of TMD-doped α-synuclein (SNCA) peptide-imprinted poly(AN-co-MSAN)-coated electrodes.

An electrochemical platform based on a hemin-rGO-cMWCNTs modified aptasensor for sensitive detection of kanamycin

Kanamycin (KANA) residue in meat is particularly harmful to public health and there is an urgent need to establish a fast, accurate and low-cost method to determinate KANA in food quality control. In this paper, hemin-reduced graphene oxide-carboxylated multiwalled carbon nanotubes (hemin-rGO-cMWCNTs) were designed and prepared, and the characteristics of hemin-rGO-cMWCNTs are presented. After that, an aptamer/hemin-rGO-cMWCNTs sensor for determination of KANA was developed. The electrochemical characteristics were studied by cyclic voltammetry (CV), differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS). Under optimal conditions, the sensitive response of the aptasensor towards KANA presented a wide concentration range of 10-9 to 10-6 M and a low detection limit of 0.36 nM (S/N = 3). Meanwhile, the aptasensor showed prominent selectivity, high stability and acceptable reproducibility in the application of KANA detection. In addition, the aptasensor detection in real samples correlated well with that obtained by liquid chromatograph mass spectrometer (LCMS).

An electrochemical biosensor based on methylene blue-loaded nanocomposites as signal-amplifying tags to detect pathogenic bacteria

A sandwich-type electrochemical biosensor was successfully constructed for the sensitive detection of pathogenic bacteria. In this biosensor platform, methylene blue (MB) organic-inorganic nanocomposites (MB@MI) were synthesized from magainin I (MI, antimicrobial peptide specific to Escherichia coli O157:H7), Cu3(PO4)2 and MB via a one-pot method, and were explored as a novel electrochemical signal label of biosensors generating amplified electrochemical signals by differential pulse voltammetry (DPV). E. coli O157:H7 specifically sandwich bound to the aptamers on the electrode surface and MB@MI nanocomposites, and the changes in the current signal generated on the electrode surface were used for the quantitative determination of E. coli O157:H7. Under optimum conditions, the proposed biosensor showed excellent performance with a wide linear range of 102-107 CFU mL-1 and a low detection limit of 32 CFU mL-1, featuring favorable selectivity, repeatability and stability. According to the experiments conducted on real samples, the proposed approach is capable of detecting pathogenic bacteria in clinical diagnostics.

Electrochemical Aptasensors: Current Status and Future Perspectives

This article reviews the progress of diversity of electrochemical aptasensor for target analytes detection. The immobilization strategies of aptamers on an electrode surface are addressed. The aptasensors are also introduced in compliance with the assay platforms. Many electrochemical aptasensors are nearly identical to conventional immunochemical approaches, sandwich and competition assays using electroactive signaling moieties. Others are "signal-on" and "sign-off" aptasensors credited to the target binding-induced conformational change of aptamers. Label-free aptasensors are also highlighted. Furthermore, the aptasensors applied for clinically important biomarkers are emphasized.

Point-of-Care Platform for Early Diagnosis of Parkinson's Disease

We created a cost-benefit analysis and swift point-of-care (PoC) testing for early stage Parkinson's disease (PD) that delivers the possibility of providing sensitive, rapid, and user-friendly analysis in home diagnostics applications. α-Synuclein (α-Syn) is considered a meaningful biomarker for the diagnosis of early stage PD. The PoC platform for diagnosis of PD is simply constructed with a conductive polymer and an aptamer receptor on a screen-printed electrode and exhibits a remarkable low detection limit of 1 × 10^-3 fM. The developed PoC platform will offer an opportunity for individuals to conveniently and periodically check the progress of the diseases and success through expansion as a checkup platform for other diseases.