A versatile signal-enhanced ECL sensing platform based on molecular imprinting technique via PET-RAFT cross-linking polymerization using bifunctional ruthenium complex as both catalyst and sensing probes

Molecularly Imprinted Microspheres in Active Compound Separation from Natural Product

Molecularly Imprinted Microspheres (MIMs) or Microsphere Molecularly Imprinted Polymers represent an innovative design for the selective extraction of active compounds from natural products, showcasing effectiveness and cost-efficiency. MIMs, crosslinked polymers with specific binding sites for template molecules, overcome irregularities observed in traditional Molecularly Imprinted Polymers (MIPs). Their adaptability to the shape and size of target molecules allows for the capture of compounds from complex mixtures. This review article delves into exploring the potential practical applications of MIMs, particularly in the extraction of active compounds from natural products. Additionally, it provides insights into the broader development of MIM technology for the purification of active compounds. The synthesis of MIMs encompasses various methods, including precipitation polymerization, suspension polymerization, Pickering emulsion polymerization, and Controlled/Living Radical Precipitation Polymerization. These methods enable the formation of MIPs with controlled particle sizes suitable for diverse analytical applications. Control over the template-to-monomer ratio, solvent type, reaction temperature, and polymerization time is crucial to ensure the successful synthesis of MIPs effective in isolating active compounds from natural products. MIMs have been utilized to isolate various active compounds from natural products, such as aristolochic acids from Aristolochia manshuriensis and flavonoids from Rhododendron species, among others. Based on the review, suspension polymerization deposition, which is one of the techniques used in creating MIPs, can be classified under the MIM method. This is due to its ability to produce polymers that are more homogeneous and exhibit better selectivity compared to traditional MIP techniques. Additionally, this method can achieve recovery rates ranging from 94.91% to 113.53% and purities between 86.3% and 122%. The suspension polymerization process is relatively straightforward, allowing for the effective control of viscosity and temperature. Moreover, it is cost-effective as it utilizes water as the solvent.

Advances in electrochemiluminescence for single-cell analysis

Recent years have witnessed the emergence of innovative analytical methods with high sensitivity and spatiotemporal resolution that allowed qualitative and quantitative analysis to be carried out at single-cell and subcellular levels. Electrochemiluminescence (ECL) is a unique chemiluminescence of high-energy electron transfer triggered by electrical excitation. The ingenious combination of electrochemistry and chemiluminescence results in the distinct advantages of high sensitivity, a wide dynamic range and good reproducibility. Specifically, single-cell ECL (SCECL) analysis with excellent spatiotemporal resolution has emerged as a promising toolbox in bioanalysis for revealing individual cells' heterogeneity and stochastic processes. This review focuses on advances in SCECL analysis and bioimaging. The history and recent advances in ECL probes and strategies for system design are briefly reviewed. Subsequently, the latest advances in representative SCECL analysis techniques for bioassays, bioimaging and therapeutics are also highlighted. Then, the current challenges and future perspectives are discussed.

Photoswitchable CRISPR/Cas12a-Amplified and Co3O4@Au Nanoemitter Based Triple-Amplified Diagnostic Electrochemiluminescence Biosensor for Detection of miRNA-141

In this work, a CRISPR/Cas12a initiated switchable ternary electrochemiluminescence (ECL) biosensor combined with a Co3O4@Au nanoemitter is presented for the in vitro monitoring of miRNA-141. Benefiting from the advantages of high-throughput cargo payload capability and superconductivity, three-dimensional reduced graphene oxide (3D-rGO) was designated as an introductory conducting stratum of a paper working electrode (PWE). With the collaborative participation of Co3O4@Au NPs, the transmutation of TPrA in the Ru(bpy)32+/TPrA system can be riotously expedited into exorbitant free radical ions TPrA•, which provoked the exaggeration of the ECL signal. Moreover, the programmable enzyme-free hybrid chain reaction (HCR) amplifier on the PWE surface accurately anchored the assembly of nucleic acid tandem and accomplished the secondary recursion of the signal. Impressively, the multifunctional CRISPR/Cas12a with nonspecific cis/trans-splitting decomposition manipulated the photoswitch of the "on-off" signal state that avoided the false-positive diagnosis. The presented multistrategy cooperative biosensor demonstrated extraordinary sensitivity and specificity, with a low detection limit of 3.3 fM (S/N = 3) in the concentration scope from 10 fM to 100 nM, which fully corresponded to the expectation. Overall, this innovative methodology paved a generous avenue for evaluating multifarious biotransformations and provided a tremendous impetus to the development of real-time diagnosis and clinical detection of other biomarkers.

Molecularly imprinted polymers via reversible addition-fragmentation chain-transfer synthesis in sensing and environmental applications

Molecularly imprinted polymers (MIP) have shown their potential as artificial and selective receptors for environmental monitoring. These materials can be tailor-made to achieve a specific binding event with a template through a chosen mechanism. They are capable of emulating the recognition capacity of biological receptors with superior stability and versatility of integration in sensing platforms. Commonly, these polymers are produced by traditional free radical bulk polymerization (FRP) which may not be the most suitable for enhancing the intended properties due to the poor imprinting performance. To improve the imprinting technique and the polymer capabilities, controlled/living radical polymerization (CRP) has been used to overcome the main drawbacks of FRP. Combining CRP techniques such as RAFT (reversible addition-fragmentation chain transfer) with MIP has achieved higher selectivity, sensitivity, and sorption capacity of these polymers when implemented as the transductor element in sensors. The present work focuses on RAFT-MIP design and synthesis strategies to enhance the binding affinities and their implementation in environmental contaminant sensing applications.

Specific sensing of resorcin based on the hierarchical porous nanoprobes constructed by cuttlefish-derived biomaterials through differential pulse voltammetry

The specific detection of resorcin from its isomers is a current research hotspot. Thus in our work, a ternary hierarchical porous nanoprobe has been constructed based on the combination of cuttlefish ink and bimetallic Au@Ag nanoclusters for the specific sensing of resorcin. Briefly, through electrostatic interaction, Au@Ag core-shell nanoclusters are immobilized on the surface of polydopamine extracted from cuttlefish, which is turned into nitrogen-doped porous carbon functionalized by bimetallic Au@Ag by topological transformation subsequently. Afterward, an electrochemical sensor is fabricated based on the nanoprobes for specifically determining resorcin in solution by differential pulse voltammetry, and the linear detection ranges of the sensor are 1-100 μM and 1.2-4 mM while the detection limit reaches 0.06 μM. Meanwhile, the sensing mechanism of resorcin by the pre-fabricated sensor is detailedly studied by density functional theory to obtain a clear electrochemical process. Besides, the selectivity, stability, plus reproducibility of the pre-fabricated sensor have been also tested, and the determinations for resorcin in real environmental water samples have also been performed with good recoveries, revealing the auspicious application potential in the environmental monitoring.

A molecularly imprinted nanoreactor with spatially confined effect fabricated with nano-caged cascaded enzymatic system for specific detection of monosaccharides

Glucose oxidase (GOx), traditionally regarded as an oxidoreductase with high β-D-glucose specificity, has been widely applied as sensing probe for β-D-glucose detection. However, it is found that the specificity of GOx is not absolute and GOx cannot decern β-D-glucose among its isomers such as xylose, mannose and galactose. The existence of the other monosaccharides in sensing system could compromise the sensitivity for β-D-glucose, therefore, it is of great urgency to achieve the highly specific catalytic performance of GOx. Herein, porous metal-organic frameworks (MOF) are prepared as the host matrix for immobilization of both GOx and bovine hemoglobin (BHb), obtained a cascaded catalytic system (MOF@GOx@BHb) with both enhanced GOx activity and peroxidase-like activity owing to the spatially confined effect. Then, using β-D-glucose as both template molecules and substances, hydroxyl radicals are produced continuously and applied for initiating the polymerization of molecular imprinting polymers (MIPs) on the surface of MOF@GOx@BHb. Impressively, the obtaining molecularly imprinted GOx (noted as MOF@GOx@BHb-MIPs) achieves the highly sensitive and specific detection of β-D-glucose in the concentration range of 0.5-20 μM with the LOD = 0.4 μM (S/N = 3) by colorimetry. Similarly, MOF@GOx@BHb-MIPs are subsequently obtained using mannose, xylose and galactose as template molecules, respectively, and also show satisfied specific catalytic activity towards corresponding templates, indicating the effectiveness of the proposed strategy to achieve highly specific catalytic performance of GOx.

Recognition of human hemoglobin with macromolecularly imprinted polymeric nanoparticles using non-covalent interactions

Hemoglobin (Hb) is the most abundant protein in the blood. It is vital for the living as oxygen carriers. Some of the very pure Hb-containing biological fluids are currently under clinical trial. However, the removal and purification of Hb from the blood are quite difficult, especially when it is at a low concentration level. In this study, the molecularly imprinted polymeric nanoparticles (MIPNs) were prepared using N-methacryloyl-histidine methyl ester (MAH) by mini-emulsion polymerization technique for specific binding of human hemoglobin (HHb). MIPNs in monosize form have a size of 152 ± 4 nm. They also have a high binding capacity (32.33 mg/g) of HHb. MIPNs retain 84% of the re-binding capacity for HHb after 10 cycles. The nanoparticles have 16 and 5 times higher binding capacity of HHb, respectively, in the presence of bovine serum albumin and lysozyme. Thanks to their high binding capacity and selectivity, MIPNs will allow them to be detected selectively for different target molecules. According to molecular docking, the main binding forces depend on hydrogen bonds and Van der Waals forces in the interaction within 5 Å around MAH molecule are observed through the amino acid residues of HHb at β1 and β2 subunit. The statistical mechanical analysis of docking showed that the free energy (ΔG) is -2732.14 kcal/mol, which indicates the interaction between MAH and HHb is energetically favorable at 298.15°K.

Recent advances in electrochemiluminescence luminophores

Electrochemiluminescence (ECL) has continued to receive considerable attention in various applications, owing to its intrinsic advantages such as near-zero background response, wide dynamic range, high sensitivity, simple instrumentation, and low cost. The ECL luminophore is one of the most significant components during the light generation processes. Despite significant progress that has been made in the synthesis of new luminophores and their roles in resolving various challenges, there are few comprehensive summaries on ECL luminophores. In this review, we discuss some of the recent advances in organic, metal complexes, nanomaterials, metal oxides, and near-infrared ECL luminophores. We also emphasize their roles in tackling various challenges with illustrative examples that have been reported in the last few years. Finally, perspective and some unresolved challenges in ECL that can potentially be addressed by introducing new luminophores have also been discussed. Graphical abstract.

Stimuli-responsive polymer/nanomaterial hybrids for sensing applications

Chemical and biological/biochemical sensors are capable of generating readout signals that are proportional to the concentration of specific analytes of interest. Signal sensitivity and limit of detection/quantitation can be enhanced through the use of polymers, nanomaterials, and their hybrids. Of particular interest are stimuli-responsive polymers and nanomaterials due to their ability to change their physical and/or chemical characteristics in response to their environment, and/or in the presence of molecular/biomolecular species of interest. Their individual use for sensing applications have many benefits, although this review focuses on the utility of stimuli-responsive polymer and nanomaterial hybrids. We discuss three main topics: stimuli-responsive nanogels, stimuli-responsive network polymers doped with nanomaterials, and nanoparticles modified with stimuli-responsive polymers.

Electrochemical CYFRA21-1 DNA sensor with PCR-like sensitivity based on AgNPs and cascade polymerization

In this work, a new method of CYFRA21-1 DNA (tDNA) detection based on electrochemically mediated atom transfer radical polymerization (e-ATRP) and surface-initiated reversible addition-fragmentation chain transfer polymerization (SI-RAFT) cascade polymerization and AgNP deposition is proposed. Firstly, the peptide nucleic acid (PNA) probe is captured on a gold electrode by Au-S bonds for specific recognition of tDNA. After hybridization, PNA/DNA strands provide high-density phosphate groups for the subsequent ATRP initiator by the identified carboxylate-Zr⁴⁺-phosphate chemistry. Then, a large number of monomers are successfully grafted from the DNA through the e-ATRP reaction. After that, the chain transfer agent of SI-RAFT and methacrylic acid (MAA) are connected by recognized carboxylate-Zr⁴⁺-carboxylate chemistry. Subsequently, through SI-RAFT, the resulting polymer introduces numerous aldehyde groups, which could deposit many AgNPs on tDNA through silver mirror reaction, causing significant amplification of the electrochemical signal. Under optimal conditions, this designed method exhibits a low detection limit of 0.487 aM. Moreover, the method enables us to detect DNA at the level of PCR-like and shows high selectivity and strong anti-interference ability in the presence of serum. It suggests that this new sensing signal amplification technology exhibits excellent potential of application in the early diagnosis of non-small cell lung cancer (NSCLC). Graphical abstract Electrochemical detection principle for CYFRA21-1 DNA based on e-ATRP and SI-RAFT signal amplification technology.

Electrochemiluminescence biosensor for DNA hydroxymethylation detection based on enzyme-catalytic covalent bonding reaction of -CH2OH and thiol functionalized Fe3O4 magnetic beads

5-Hydroxymethylcytosine (5 hmC) is a novel epigenetic modification that plays an important role in mammalian nuclear reprogramming, regulation of gene activity, and initiation of DNA demethylation. In this paper, an electrochemiluminescence sensor was constructed for 5 hmC detection based on thiol functional Fe₃O₄ magnetic beads and covalent chemical reaction of -CH₂OH in 5 hmC. First, Fe₃O₄ magnetic beads were prepared and modified with thiol. Then, 5 hmC was captured on the surface of the magnetic beads by the reaction between -CH₂OH of 5 hmC and -SH of the thiol-functionalized Fe₃O₄ under the catalysis of DNA methyltransferase (M. HhaI). After that, through a series of reactions, phos-tag-biotin, avidin, and bis(hexafluorophosphate) (Ru (bpy)₂ (phen-5-NH₂) (PF₆)₂) (Ru) were further successively immobilized on the surface of the magnetic beads. More importantly, these reactions were carried out in a solution to ensure the activity of the biomolecules, and further to ensure that the reaction proceeded sufficiently. Finally, an ECL signal was generated by the introduction of Ru. The concentration of 5 hmC presented a good linear relationship with the ECL signal intensity in the range of 0.01-500 nM, and the detection limit was 2.86 pM. Moreover, we also used this method to study the 5 hmC content change in rice seedlings treated with antibiotics and heavy metal composite pollutants, and in chicken embryo fibroblast cell infected with and without avian leukosis virus subgroup J.

Gold nanoparticles decorated carbon nitride nanosheets as a coreactant regulate the conversion of the dual-potential electrochemiluminescence of Ru(bpy)32+ for Hg2+ detection

Dual-potential electrochemiluminescence of Ru(bpy)₃²⁺ for Hg²⁺ assay using Au–g-C₃N₄ NSs as on-electrode coreactant.

Fabrication of Water-Compatible Molecularly Imprinted Resin in a Hydrophilic Deep Eutectic Solvent for the Determination and Purification of Quinolones in Wastewaters

A novel water-compatible molecularly imprinted resin was prepared in a green solvent deep eutectic solvent (DES). Resorcinol and melamine, as functional monomers with an abundant hydrophilic group, such as –OH, –NH₂ and –NH–, were introduced into the molecularly imprinted resin (MIR). Three DESs (choline chloride-ethylene glycol, tetramethylammonium bromide-ethylene glycol and tetramethylammonium chloride-ethylene glycol) were used to synthesize the molecularly imprinted resin and the resulting deep eutectic solvent-based molecularly imprinted resins were characterized by particle size analysis, elemental analysis, scanning electron microscopy, Fourier transform infrared spectroscopy and thermogravimetric analysis. The resulting deep eutectic solvent-based molecularly imprinted resins were then applied to the adsorption of quinolones (ofloxacin) in water. The adsorption process of deep eutectic solvent-based molecularly imprinted resin followed the static adsorption model, Langmuir isotherm (R² ≥ 0.9618) and kinetic model pseudo-second-order (R² > 0.9814). The highest theory adsorption ability of the three kinds of deep eutectic solvent-based molecularly imprinted resins was more than 23.79 mg/g. The choline chloride-ethylene glycol-based MIR was applied to solid-phase extraction for the determination and purification of quinolones (e.g., ciprofloxacin and ofloxacin). The detection limit of deep eutectic solvent-based molecularly imprinted resin-solid-phase extraction method was less than 0.018 mg/L. The recoveries of the deep eutectic solvent-based molecularly imprinted resin-solid-phase extraction method at three spiked levels were 88.7–94.5%, with a relative standard deviation of ≤4.8%. The novel deep eutectic solvent-based molecularly imprinted resin-solid-phase extraction method is a simple, selective and accurate pre-treatment method and can be used to determine the quinolones in environmental water.

Fabrication of Cobaltosic Oxide Nanoparticle-Doped 3 D MXene/Graphene Hybrid Porous Aerogels for All-Solid-State Supercapacitors

MXenes are a new family of 2 D transition metal carbides and nitrides, which have attracted enormous attention in electrochemical energy storage, sensing technology, and catalysis owing to their good conductivity, high specific surface area, and excellent electrochemical properties. In this work, a series of Co₃ O₄ -doped 3 D MXene/RGO hybrid porous aerogels is designed and prepared through a facile in situ reduction and thermal annealing process, in which the reduced graphene oxide (RGO) conductive network can electrically link the separated Co₃ O₄ -MXene composite nanosheets, leading to enhanced electronic conductivity. It is found that upon using the Co₃ O₄ -MXene/RGO hybrid porous aerogel prepared with a mass ratio of Co₃ O₄ -MXene/RGO of 3:1 (CMR31) as an electrode for a supercapacitor, a superior specific capacitance of 345 F g^-1 at the current density of 1 A g^-1 is achieved, which is significantly higher than those of Ti₃ C₂ T_x MXene, RGO, and MXene/RGO electrodes. In addition, a high capacitance retention (85 % of the initial capacitance after 10 000 cycles at a high current density of 3 A g^-1 ) and a low internal resistance R_s (0.44 Ω) can be achieved. An all-solid-state asymmetric supercapacitor (ASC) device is assembled using CMR31, and it has the ability to light up a blue LED indicator for 5 min if four ASCs are connected in series. Therefore, these novel Co₃ O₄ -MXene/RGO hybrid porous aerogels have potential practical applications in high-energy storage devices.