Integrating an ex-vivo skin biointerface with electrochemical DNA biosensor for direct measurement of the protective effect of UV blocking agents

CISS-Based Label-Free Novel Electrochemical Impedimetric Detection of UVC-Induced DNA Damage

In this work, we demonstrate chiral-induced spin selectivity (CISS)-based label-free electrochemical impedimetric detection of radiation-induced DNA damage using the electrons' spin as a novel tool of sensing. For this, self-assembled monolayers (SAMs) of short ds-DNA (of length 7.14 nm) are prepared on arrays of multilayer thin film devices comprising a gold overlay (500 μm diameter with 10 nm thickness) on a nickel thin film (100 nm) fabricated by the physical vapor deposition technique. Subsequently, the SAMs of ds-DNA are exposed to ultraviolet C (UVC) radiation for a prolonged period of 8 h to induce structural perturbations in DNA. The susceptibility of DNA to radiation-induced damage was probed by recording the spin-dependent electrochemical impedimetric spectra, wherein a continuous sinusoidal wave of the amplitude of 10 mV was superimposed on DC bias in the frequency range of 10⁰-10⁵ Hz, with simultaneous spin injection through the attached DNA. The inherent correlation between the charge-transfer resistance (R _ct) and the spin selectivity of electrons through DNA was taken into account for the detection of DNA damage for the first time with a limit of detection achieved up to 10 picomolar concentrations of DNA. As the spin-polarized electrons directly probe the structural symmetry, it is robust against perturbation from electronic signals usually found in conventional electrochemical biosensors.

Application of silver solid amalgam electrodes in electrochemical detection of DNA damage

In this study, a mercury meniscus-modified silver solid amalgam electrode was used for the first time for the detection of UV-induced DNA damage. The integrity of the double-stranded DNA (dsDNA) layer was detected indirectly using the evaluation of the methylene blue reduction within its accumulation into dsDNA after the UV irradiation of the biosensor surface with two different wavelengths (254 nm and 365 nm), monitored by differential pulse voltammetry. Moreover, a simple electrochemical characterization of the biosensor surface was performed using cyclic voltammetry of the redox indicator hexaammineruthenium chloride (RuHex) present in the solution. Electrochemical impedance spectroscopy (EIS) was used in both cases for the verification of results. Individual electrochemical signals depend on the time of biosensor exposure to UV irradiation as well as on the selected wavelengths and are different for both used types of dsDNA (salmon sperm and calf thymus). The highest degradation degree up to 60% was observed using sensitive EIS of methylene blue after 10 min irradiation of the biosensor at 254 nm. The use of RuHex seems to be less sensitive for the detection of dsDNA structural changes, when the degradation degree up to 40% was observed, using EIS at the same conditions.

Sustainable and Superhydrophobic Lignocellulose-Based Transparent Films with Efficient Light Management and Self-Cleaning

Light-management (LM) films that can regulate transmitted light are significant to diverse fields, such as optoelectronics and energy-efficient buildings. However, for conventional LM films made from petroleum-based polymers, the nonbiodegradability and complicated fabrication process remain a challenge. Herein, we prepare sustainable lignocellulose-based films with excellent light-management capability by facile dissolution and regeneration of wood pulp and the corncob residue from xylitol production (CRXP). The obtained films exhibit high transparency (78%), high haze (61%), and especially remarkable UV-blocking performance (99.94% for UVB and 98.04% for UVA). They achieve consistent indoor light distribution and UV radiation shielding by light management for the application of smart buildings. Furthermore, by spray-coating with SiO₂ nanoparticles to construct hierarchical networks, the films are endowed with a superhydrophobic surface with a self-cleaning function to mitigate dust accumulation. Our work provides novel insights into the conversion of lignocellulosic waste to desirable and sustainable functional materials.

A self-powered origami paper analytical device with a pop-up structure for dual-mode electrochemical sensing of ATP assisted by glucose oxidase-triggered reaction

A self-powered origami paper-based analytical device (oPAD), being with a pop-up structure as mechanical valve to first realize dual-mode of differential pulse voltammery (DPV)/supercapacitor amplified signal read out systems, was designed for detecting adenosine 5'-triphosphate (ATP) assisted by glucose oxidase (GOx)-triggered reaction. In order to accommodate the alternative step for dual-mode detection, a pop-up structure inspired by pop-up greeting cards was developed, making it possible to change the fluidic path with good registration and repeatability. To realize supercapacitor detection mode, a sandwich structure of a DNA sequence (DNA1), aptamer and a DNA sequence modified with GOx (GOx-DNA2) was formed on detection zone by hybridization reaction. With the addition of ATP, the GOx-DNA2 could be released with the specific binding between ATP and aptamer, and flowed into the reaction zone to catalyze the oxidation of glucose. Due to the difference in concentrations of [Fe(CN)₆]^3- and [Fe(CN)₆]^4- caused by the GOx-triggered reaction, a voltage could be produced to charge a paper supercapacitor which could provide a high instantaneous current with a digital multimeter to transduce the result of the assay, and realize the self-generation of an amplified electrical signal. By simply varying the direction of pop-up structure, the electrochemical signal from DPV read out mode could be achieved through catalytic oxidation of glucose by the remaining GOx-DNA2 on the detection zone. The proposed self-powered oPAD enabled the sensitive diagnosis of ATP in a linear range of 10-5000 nM with a limit of detection of 3 nM and 1.4 nM, respectively.