Z-scheme I-BiOCl/CdS with abundant oxygen vacancies as highly effective cathodic material for photocathodic immunoassay

H2O2-induced photocurrent polarity reversal of chitosan stabilized I-BiOBr/CuS composite heterojunction for highly sensitive cholesterol detection

Photocurrent polarity reversal reflects a crucial switching procedure between the anode and cathode paths, which is important for the eradication of false-positive signals and the enhancement of the detection sensitivity and reliability of photoelectrochemical (PEC) sensors. Herein, we constructed a PEC biosensor which exhibited excellent H₂O₂-induced photocurrent polarity reversal properties. In the sensor chitosan stabilized I-BiOBr/CuS semiconductor heterojunction was employed as the photosensitive material, which exhibited large cathode photocurrent. Upon the introduction of H₂O₂ the photocurrent polarity reversed due to the change of PEC mechanism. As an application proof of the mechanism, cholesterol was coupled with cholesterol oxidase to produce H₂O₂. The reversal photocurrent increased with increasing cholesterol concentration, achieving sensitive and selective PEC detection of cholesterol. Under the selected conditions, the PEC sensor showed a detection limit as low as 0.21 μM, a broad linear range and high stability. Moreover, the measurement results of actual samples were comparable to those of commercial cholesterol detection tool. Hence, it was promising in clinical diagnosis.

Oxygen-enriching triphase platform for reliable sensing of femtomolar Alzheimer's neurofilament lights

Accurate quantification of neurofilament lights (NfLs), a prognostic blood biomarker, is highly required to predict neurodegeneration in the presymptomatic stages of Alzheimer's disease. Here, we report self-oxygen-enriching coral structures with triphase interfaces for the label-free photocathodic detection of NfLs in blood plasma with femtomolar sensitivities and high reliability. In conventional photocathodic immunoassays, the poor solubility and sluggish diffusion rate of the dissolved oxygen serving as electron acceptors have necessitated the incorporation of additional electron acceptors or aeration procedures. To address the challenge, we designed the coral-like copper bismuth oxides (CBO) with robust solid-liquid-air contact boundaries that enrich the interfacial oxygen levels without an external aeration source. By optimally assembling the perfluorododecyltrichlorosilane (FTCS) and platinum (Pt) co-catalysts into the silver-doped CBO (Ag:CBO), the stable solid-liquid-air contact boundaries were formed within the sensor interfaces, which allowed for the abundant supply of air phase oxygen through an air pocket connected to the atmosphere. The Pt/FTCS-Ag:CBO exhibited the stable background signals independent of the dissolved oxygen fluctuations and amplified photocurrent signals by 1.76-fold, which were attributed to the elevated interfacial oxygen levels and 11.15 times-lowered mass transport resistance. Under the illumination of white light-emitting diode, the oxygen-enriching photocathodic sensor composed of Pt/FTCS-Ag:CBO conjugated with NfLs-specific antibodies precisely quantified the NfLs in plasma with a low coefficient of variation (≤2.97%), a high degree of recovery (>97.0%), and a limit of detection of 40.38 fg/mL, which was 140 times lower than the typical photocathodic sensor with diphase interfaces.

Hydrangea-like TiO2/Bi2MoO6 porous nanoflowers triggering highly sensitive electrochemical immunosensing to tumor marker

Rapid and sensitive detection of carcinoembryonic antigen (CEA) is of great significance for cancer patients. Here, molybdenum (Mo) was doped into bismuth oxide (Bi2O3) by one-pot hydrothermal method forming porous tremella Bi2MoO6 nanocomposites with a larger specific surface area than the spherical structure. Then, a new kind of hydrangea-like TiO2/Bi2MoO6 porous nanoflowers (NFs) was prepared by doping titanium into Bi2MoO6, where titanium dioxide (TiO2) grew in situ on the surface of Bi2MoO6 nanoparticles (NPs). The hydrangea-like structure provides larger specific surface area, higher electron transfer ability and biocompatibility as well as more active sites conducive to the attachment of anti-carcinoembryonic antigen (anti-CEA) to TiO2/Bi2MoO6 NFs. A novel label-free electrochemical immunosensor was then constructed for the quantitative detection of CEA using TiO2/Bi2MoO6 NFs as sensing platform, showing a good linear relationship with CEA in the concentration range 1.0 pg/mL ~ 1.0 mg/mL and a detection limit of 0.125 pg/mL (S/N = 3). The results achieved with the designed immunosensor are comparable with many existing immunosensors used for the detection of CEA in real samples.

In Situ Formation of Bi2MoO6-Bi2S3 Heterostructure: A Proof-Of-Concept Study for Photoelectrochemical Bioassay of l-Cysteine

A novel signal-increased photoelectrochemical (PEC) biosensor for l-cysteine (L-Cys) was proposed based on the Bi₂MoO₆–Bi₂S₃ heterostructure formed in situ on the indium–tin oxide (ITO) electrode. To fabricate the PEC biosensor, Bi₂MoO₆ nanoparticles were prepared by a hydrothermal method and coated on a bare ITO electrode. When L-Cys existed, Bi₂S₃ was formed in situ on the interface of the Bi₂MoO₆/ITO electrode by a chemical displacement reaction. Under the visible light irradiation, the Bi₂MoO₆–Bi₂S₃/ITO electrode exhibited evident enhancement in photocurrent response compared with the Bi₂MoO₆/ITO electrode, owing to the signal-increased sensing system and the excellent property of the formed Bi₂MoO₆–Bi₂S₃ heterostructure such as the widened light absorption range and efficient separation of photo-induced electron–hole pairs. Under the optimal conditions, the sensor for L-Cys detection has a linear range from 5.0 × 10⁻¹¹ to 1.0 × 10⁻⁴ mol L⁻¹ and a detection limit of 5.0 × 10⁻¹² mol L⁻¹. The recoveries ranging from 90.0% to 110.0% for determining L-Cys in human serum samples validated the applicability of the biosensor. This strategy not only provides a method for L-Cys detection but also broadens the application of the PEC bioanalysis based on in situ formation of photoactive materials.

Bismuth Oxychloride Nanomaterials Fighting for Human Health: From Photodegradation to Biomedical Applications

Environmental pollution and various diseases seriously affect the health of human beings. Photocatalytic nanomaterials (NMs) have been used for degrading pollution for a long time. However, the biomedical applications of photocatalytic NMs have only recently been investigated. As a typical photocatalytic NM, bismuth oxychloride (BiOCl) exhibits excellent photocatalytic performance due to its unique layered structure, electronic properties, optical properties, good photocatalytic activity, and stability. Some environmental pollutants, such as volatile organic compounds, antibiotics and their derivatives, heavy metal ions, pesticides, and microorganisms, could not only be detected but also be degraded by BiOCl-based NMs due to their excellent photocatalytic and photoelectrochemical properties. In particular, BiOCl-based NMs have been used as theranostic platforms because of their CT and photoacoustic imaging abilities, as well as photodynamic and photothermal performances. However, some reviews have only profiled the applications of dye degradation, hydrogen or oxygen production, carbon dioxide reduction, or nitrogen fixation of BiOCl NMs. There is a notable knowledge gap regarding the systematic study of the relationship between BiOCl NMs and human health, especially the biomedical applications of BiOCl-based NMs. As a result, in this review, the recent progress of BiOCl-based photocatalytic degradation and biomedical applications are summarized, and the improvement of BiOCl-based NMs in environmental and healthcare fields are also discussed. Finally, a few insights into the current status and future perspectives of BiOCl-based NMs are given.

Electrochemistry/Photoelectrochemistry-Based Immunosensing and Aptasensing of Carcinoembryonic Antigen

Recently, electrochemistry- and photoelectrochemistry-based biosensors have been regarded as powerful tools for trace monitoring of carcinoembryonic antigen (CEA) due to the fact of their intrinsic advantages (e.g., high sensitivity, excellent selectivity, small background, and low cost), which play an important role in early cancer screening and diagnosis and benefit people's increasing demands for medical and health services. Thus, this mini-review will introduce the current trends in electrochemical and photoelectrochemical biosensors for CEA assay and classify them into two main categories according to the interactions between target and biorecognition elements: immunosensors and aptasensors. Some recent illustrative examples are summarized for interested readers, accompanied by simple descriptions of the related signaling strategies, advanced materials, and detection modes. Finally, the development prospects and challenges of future electrochemical and photoelectrochemical biosensors are considered.

A new Bi2MoO6 nano-tremella-based electrochemical immunosensor for the sensitive detection of a carcinoembryonic antigen

Novel Bi₂MoO₆ nanohybrids with a tremella-like structure modified with gold nanoparticles were used to fabricate an electrochemical immunosensing platform of CEA.