Protein recognition by polydopamine-based molecularly imprinted hollow spheres

Selective and sensitive detection of dimethyl phthalate in water using ferromagnetic nanomaterial-based molecularly imprinted polymers and SERS

To overcome the complicated pretreatment, low selectivity and low sensitivity detection associated with the detection of dimethyl phthalate (DMP), this study synthesized ferromagnetic nanomaterials that coupled with surface enhanced Raman scattering (SERS) and molecular imprinting polymers (MIPs). The pretreatment process can be simplified by ferromagnetic nanomaterials, then Fe3O4@SiO2@Ag@MIPs selectively adsorbing DMP can be achieved, and SERS can be applied for DMP detection with high sensitivity. As a control, the non-imprinted polymers (NIPs) Fe3O4@SiO2@Ag@NIPs were synthesized. Adsorption experiments results showed that the saturation adsorption amounts of Fe3O4@SiO2@Ag@MIPs is 36.74 mg/g with 40 mg/L DMP and Fe3O4@SiO2@Ag@NIPs is 17.45 mg/g. For DMP, Fe3O4@SiO2@Ag@MIPs have a greater affinity. In addition, after seven adsorption-desorption cycles the Fe3O4@SiO2@Ag@MIPs are reusable with approximately a 9.8 % loss in adsorption capacity. With an 8.7 × 10-9 M detection limit, DMP detection was performed by SERS, which revealed that the Raman intensities of the associated characteristic peak were linearly proportional to the DMP concentrations. As a result, the recovery rate of the testing artificial water varied from 87.9 % to 117 %. These outcomes show that the suggested technique for finding DMP in actual water samples is practical.

Mxene Quantum Dot Nanosurface Molecularly Imprinted Polymer Resonance Rayleigh Scattering Probe for Highly Sensitive and Selective Determination of Thiocyanate

In this article, a nanosurface molecularly imprinted polymer (MQD@MIP) resonance Rayleigh scattering (RRS) spectral probe for SCN- was prepared by sol-gel method, using Mxene quantum dot as a matrix, thiocyanate (SCN-) as a template ion, (3-aminopropyl) triethoxysilane (APTES) as a functional monomer, tetraethoxysilane (TEOS) as the cross-linker, and ammonia as the initiator. The probe produced an RRS peak at 370 nm and exhibits a strong RRS energy transfer (RRS-ET) effect when the MQD@MIP probe identifies SCN-. As the concentration of SCN- increased, the RRS-ET was enhanced, and the signal value of the system decreased linearly at 370 nm, with a determination range of 0.87-5.22 μg/L, and a detection limit of 0.37 μg/L SCN-. This detection method has the characteristics of simplicity, sensitivity, and specific recognition. The RRS method was used to determine SCN- in the sample, with relative standard deviation of 1.95-10.98% and recovery of 89.0-102.8%.

Molecularly imprinted electrochemical biosensor for thrombin detection by comparing different monomers

Aim: Investigating molecularly imprinted polymers (MIPs) in electrochemical biosensors for thrombin detection, an essential protein biomarker. Comparing different monomers to showcase distinct sensitivity, specificity and stability advantages. Materials & methods: Dopamine, thionine and ethanolamine serve as monomers for MIP synthesis. Electrochemical methods and atomic force microscopy characterize sensor surfaces. Performance is evaluated, emphasizing monomer-specific electrochemical responses. Results: Monomer-specific electrochemical responses highlight dopamine's superior signal change and stability over 30 days. Notably, a low 5 pg/ml limit of detection, a broad linear range (5-200 pg/ml) and enhanced selectivity against interferents are observed. Conclusion: Dopamine-based MIPs show promise for high-performance electrochemical thrombin biosensors, suggesting significant applications in clinical diagnostics.

Recent Advances in Molecular Imprinting for Proteins on Magnetic Microspheres

The separation of proteins in biological samples plays an essential role in the development of disease detection, drug discovery, and biological analysis. Protein imprinted polymers (PIPs) serve as a tool to capture target proteins specifically and selectively from complex media for separation purposes. Whereas conventional molecularly imprinted polymer is time-consuming in terms of incubation studies and solvent removal, magnetic particles are introduced using their magnetic properties for sedimentation and separation, resulting in saving extraction and centrifugation steps. Magnetic protein imprinted polymers (MPIPs), which combine molecularly imprinting materials with magnetic properties, have emerged as a new area of research hotspot. This review provides an overview of MPIPs for proteins, including synthesis, preparation strategies, and applications. Moreover, it also looks forward to the future directions for research in this emerging field.

Polydopamine nanomaterials and their potential applications in the treatment of autoimmune diseases

The conventional treatment methods used for the management of autoimmune diseases (ADs) have limited efficacy and also exhibit significant side effects. Thus, identification of novel strategies to improve the efficacy and safety of ADs treatment is urgently required. Overactivated immune response and oxidative stress are common characteristics associated with ADs. Polydopamine (PDA), as a polymer material with good antioxidant and photothermal conversion properties, has displayed useful application potential against ADs. In addition, PDA possesses good biosafety, simple preparation, and easy functionalization, which is conducive for the pharmacological development of PDA nanomaterials with clinical transformation prospects. Here, we have first reviewed the preparation of PDA, the different functional integration strategies of PDA-based biomaterials, and their potential applications in ADs. Next, the mechanism of action of PDA in ADs has been elaborated in detail. Finally, the application opportunities and challenges linked with PDA nanomaterials for ADs treatment are discussed. This review is contributed to design reasonable and effective PDA nanomaterials for the diagnosis and treatment of ADs.

Unlocking the Potential of Molecularly Imprinted Polydopamine in Sensing Applications

Molecularly imprinted polymers (MIPs) are synthetic receptors that mimic the specificity of biological antibody-antigen interactions. By using a "lock and key" process, MIPs selectively bind to target molecules that were used as templates during polymerization. While MIPs are typically prepared using conventional monomers, such as methacrylic acid and acrylamide, contemporary advancements have pivoted towards the functional potential of dopamine as a novel monomer. The overreaching goal of the proposed review is to fully unlock the potential of molecularly imprinted polydopamine (MIPda) within the realm of cutting-edge sensing applications. This review embarks by shedding light on the intricate tapestry of materials harnessed in the meticulous crafting of MIPda, endowing them with tailored properties. Moreover, we will cover the diverse sensing applications of MIPda, including its use in the detection of ions, small molecules, epitopes, proteins, viruses, and bacteria. In addition, the main synthesis methods of MIPda, including self-polymerization and electropolymerization, will be thoroughly examined. Finally, we will examine the challenges and drawbacks associated with this research field, as well as the prospects for future developments. In its entirety, this review stands as a resolute guiding compass, illuminating the path for researchers and connoisseurs alike.

The Convenience of Polydopamine in Designing SERS Biosensors with a Sustainable Prospect for Medical Application

Polydopamine (PDA) is a multifunctional biomimetic material that is friendly to biological organisms and the environment, and surface-enhanced Raman scattering (SERS) sensors have the potential to be reused. Inspired by these two factors, this review summarizes examples of PDA-modified materials at the micron or nanoscale to provide suggestions for designing intelligent and sustainable SERS biosensors that can quickly and accurately monitor disease progression. Undoubtedly, PDA is a kind of double-sided adhesive, introducing various desired metals, Raman signal molecules, recognition components, and diverse sensing platforms to enhance the sensitivity, specificity, repeatability, and practicality of SERS sensors. Particularly, core-shell and chain-like structures could be constructed by PDA facilely, and then combined with microfluidic chips, microarrays, and lateral flow assays to provide excellent references. In addition, PDA membranes with special patterns, and hydrophobic and strong mechanical properties can be used as independent platforms to carry SERS substances. As an organic semiconductor material capable of facilitating charge transfer, PDA may possess the potential for chemical enhancement in SERS. In-depth research on the properties of PDA will be helpful for the development of multi-mode sensing and the integration of diagnosis and treatment.

Label-free MIP-SERS biosensor for sensitive detection of colorectal cancer biomarker

Early diagnosis of colorectal cancer can significantly improve the overall survival rate of patients, thus selective and sensitive detection of biomarkers in serum samples is vital for early detection and dynamic monitoring of cancer. Nucleoside diphosphate kinase NM23-H2 (NDKB) is an important biomarker and therapeutic target for the diagnosis of colorectal cancer (CRC). Here, a label-free and ultrasensitive biosensor for NDKB protein markers is presented for the first time, combining the characteristic capture selectivity of molecularly imprinted polymers (MIPs) and the ultrasensitivity of surface-enhanced Raman Spectroscopy (SERS) technique. The imprinted cavity serves as the only channel for Raman reporter to approach the SERS substrate, providing highly complementary non-covalent binding sites that selectively capture the target protein based on ionic, hydrogen bonding or hydrophobic interactions. Specific recognition of the NDKB protein will perfectly fill the imprinted cavity, which makes it difficult for the Raman reporter to get close to the SERS substrate, and the Raman signal decreases significantly, while the proteins of other structural sizes can not match the imprinted cavity. Through the change of the Raman signal, the proposed biosensor can realize the ultra-sensitive detection of NDKB, and the limit of detection (LOD) is 0.82 pg/mL. Compared with the traditional immunoassay technology, this combined approach with the advantages of low cost, fast response, high sensitivity and selectivity, provides clinical application potential for the early diagnosis of CRC.

Molecularly imprinted polymers as effective capturing receptors in a pseudo-ELISA immunoassay for procalcitonin detection in veterinary species

In this study, a new sandwich-type immunoenzymatic assay, based on a molecularly imprinted polymer (MIP) as an artificial antibody (pseudo-ELISA), was developed for the determination of procalcitonin (PCT) in veterinary species. The quantification of PCT in human medicine represents the state of the art for the diagnosis of sepsis; instead the clinical studies on the relevance of PCT as a sepsis predictor in veterinary patients are few, likely due to the total absence of validated assays. MIPs have been widely used as antibody mimics for important applications, and MIP-based sandwich assays have emerged as promising analytical tools for the detection of disease biomarkers. Herein, a polynorepinephrine (PNE)-based imprinted film was directly synthesized on the well surface of a 96-well plate. Subsequently, based on a commercial ELISA kit, the PCT quantification was accomplished via a colorimetric sandwich assay by replacing the capture antibody of the kit with the PNE-based MIP. This method was performed to detect canine and equine PCT in buffer and in plasma samples. Under optimal conditions, the results obtained in plasma samples showed a limit of detection (LOD) of 5.87 ng mL^-1 and a reproducibility (CV_av%) of 10.0% for canine samples, while a LOD = 4.46 ng mL^-1 and CV_av% = 7.61% were obtained for equine samples.

Amino acid-immobilized copper ion-modified carbon-based adsorbent for selective adsorption of bovine hemoglobin

We prepared an amino acid-immobilized copper ion-modified carbon-based adsorbent (C@TA@P@A-Cu) for selective bovine hemoglobin (BHb) adsorption in biological samples. Carbon nanoparticles were used as the matrix, and copper ions were attached to the amino acid-modified carbon nanoparticles as metal chelate complexes via immobilized metal affinity. BSA, Lyz, OVA, and HRP were chosen as reference proteins for further study. Furthermore, the synthesis conditions of adsorbents, SPE conditions, selectivity, competitivity, reproducibility, and reusability were extensively investigated. The results showed that the maximum adsorption capacity of C@TA@P@A-Cu microspheres for BHb under optimal conditions was 673.0 mg g^-1. The addition of a TiO₂ layer with an increased specific surface area of the adsorbent and the addition of poly-l-lysine (PLL) inhibited the adsorbent's binding ability to non-BHb proteins, but chelated Cu²⁺ increased the adsorbent's specific binding ability to BHb. Furthermore, after six adsorption-desorption cycles, the adsorbent has satisfactory reusability with no significant change in adsorption capacity. Furthermore, C@TA@P@A-Cu was successfully used to identify BHb from real blood samples, as confirmed by SDS-PAGE, and it is expected to have potential applications in protein purification and disease diagnosis.

Construction of a sensitive and selective plasmonic biosensor for prostate specific antigen by combining magnetic molecularly-imprinted polymer and surface-enhanced Raman spectroscopy

Selective and sensitive detection of cancer biomarkers in serum samples is critical for early diagnosis of cancer. Prostate specific antigen is an important biomarker of prostate cancer, which ranks high among cancer-related deaths of men over 50 years old. Herein, a novel analytical method was introduced for detection of PSA by combining high selectivity of molecularly-imprinted polymers and high sensitivity of surface-enhanced Raman spectroscopy (SERS). Firstly, magnetic nanoparticles were grafted with an imprinted layer by using tannic acid as a functional monomer, diethylenetriamine as a cross-linker and prostate specific antigen as a template molecule. Detailed surface characterization and re-binding experiment results indicated that the imprinting of the antigen was successful with an imprinting factor of 5.58. The prepared magnetic molecularly imprinted polymers (MMIPs) were used as an antibody-free capture probe and labeled with gold nanoparticles that were modified with anti-PSA and a Raman reporter, namely 5,5'-dithiobis-(2-nitrobenzoic acid). Thus, a plasmonic structure (sandwich complex) was formed between MMIP and the SERS label. The limit of detection and limit of quantification of the designed sensor were 0.9 pg/mL and 3.2 pg/mL, respectively. The sensor also showed high recovery rates (98.0-100.1% for healthy person and 99.0-101.3% for patient) with low standard deviations (less than 4.3% for healthy person and less than 3.3% for patient) for PSA in serum samples. Compared with the traditional immunoassays, the proposed method has several advantages like low cost, reduced detection procedure, fast response, high sensitivity and selectivity. It is believed that the proposed method can be potentially used for selective and sensitive determination of tumor marker of prostate cancer in clinical applications.

Molecularly imprinted colloidal array with multi-boronic acid sites for glycoprotein detection under neutral pH

Glycoproteins play vital roles in living organisms and often serve as biomarkers for some disease. However, due to the low content of glycoprotein in biological fluids, selective detection of glycoproteins is still a challenging issue that needs to be addressed. In this study, molecularly imprinted colloidal array with multi-boronic acid sites for glycoprotein detection under physiological pH was proposed. Monodispersed glycoprotein imprinted particles (SiO₂@PEI/MIPs) was first prepared based on surface imprinting strategy using horseradish peroxidase (HRP) as template, and polyethyleneimine (PEI) was used to increase the number of boronic acid groups. The binding experiment indicated that the SiO₂@PEI/MIPs hold satisfactory adsorption capacity (1.41 μmol/g), rapid adsorption rate (40 min) and preferable selectivity toward HRP. Then the SiO₂@PEI/MIPs was assembled into close-packed colloidal array to construct a label free optical sensor (denoted as GICA). Benefiting from the high ordered photonic crystal structure, binding of HRP onto the GICA could be directly readout from the changes in structure color and diffracted wavelength. The structure color of the GICA changed from bright blue to yellow with the diffraction wavelength red shifted 59 nm when the HRP concentration increased from 2.5 to 15 μmol/L. Importantly, the GICA was capable of detecting HRP from human serum samples. All those results indicated the potential of the GICA for naked-eye detection of glycoprotein.

Sensitive 'two-steps' competitive assay for gonadotropin-releasing hormone detection via SPR biosensing and polynorepinephrine-based molecularly imprinted polymer

The work reports an innovative bioassay for the detection of gonadorelin in urine, a gonadotropin-releasing hormone agonist widely used in fertility medicine and to treat hormonal dysfunctions. Gonadorelin is also a synthetic hormone listed by the World Anti-Doping Agency (WADA) and of interest in anti-doping controls. The main novelty relies on the development of a biocompatible, stable, and low-cost biomimetic receptor alternative to classic antibodies. Starting from norepinephrine monomer, a highly selective and sensitive molecularly imprinted polymer (MIP) was developed and optimized for optical real-time and label-free SPR biosensing. The selectivity has been addressed by testing a series of peptides, from high to low similarity, both in terms of molecular weight and primary sequence. Due to the very low molecular weight of gonadorelin (1182 Da), a 'two-steps' competitive assay was developed. Particular attention has been paid to the design of the competitor and its binding affinity constant towards the MIP, being a key step for the success of the competitive strategy. The SPR assay was first optimized in standard conditions and finally applied to untreated urine samples, achieving the sensitivity required by WADA guidelines. The MIP, tested in parallel with a monoclonal antibody, gave comparable results in terms of affinity constants and selectivity towards possible interfering analytes. However, the biomimetic receptor appears clearly superior in terms of sensitivity and reproducibility. This, together with its preparation simplicity, the extremely low-cost of the monomer and its reusability for hundreds of measurements, make polynorepinephrine-based MIPs powerful rivals to immune-based approaches in the near future for similar applications.

Fabrication of polydopamine-based NIR-light responsive imprinted nanofibrous membrane for effective lysozyme extraction and controlled release from chicken egg white

The development of highly efficient performance matrix for protein adsorption and scalable throughput adsorbent is highly desired, especially in pharmaceuticals and food industries. In this work, we present a simple methodology to prepare a nanofibrous membrane based surface molecular imprinted matrix (MIP) for selective separation of lysozyme. The MIP was developed by coating carboxylated poly (vinyl alcohol-co-ethylene) nanofibrous mat (EVOH-CCA NFM) with a near infrared (NIR)-light responsive polydopamine (PDA) layer. The open porous nanofibrous structure and a thin PDA layer endowed the MIPs with adsorption capacity (500 mg.g-1) within 150 min. The developed surface MIPs not only showed imprinting factor (IF = 4) with reusability upon 5 cycles, but also capability of extracting lysozyme from egg-white directly. The MIPs showed controlled release of extracted lysozyme triggered by the NIR-light responsive property of the PDA layer. Moreover, the released lysozyme possesses good bioactivity, evidenced by efficient decomposition of micrococcus bacterial cell wall.

Label-free SERS detection of Raman-Inactive protein biomarkers by Raman reporter indicator: Toward ultrasensitivity and universality

It is still challenging to sensitively detect protein biomarkers via surface-enhanced Raman scattering (SERS) technique owing to their low Raman activity. SERS tag-based immunoassay is usually applied; however, it is laborious and needs specific antibodies. Herein, an ultrasensitive and universal "Raman indicator" sensing strategy is proposed for protein biomarkers, with the aid of a glass capillary-based molecularly imprinted SERS sensor. The sensor consists of an inner SERS substrate layer for signal enhancement and an outer mussel-inspired polydopamine imprinted layer as a recognition element. Imprinted cavities have two missions: first, selectively capturing the target protein, and second, the only passageway of Raman indicator to access SERS substrate. Specific protein recognition means filling imprinted cavities and blocking Raman indicator flow. Thus, the quantity of captured protein can be reflected by the signal decrease of ultra-Raman active indicator molecule. The capillary sensor exhibited specific and reproducible detection at the level down to 4.1 × 10^-3 μg L^-1, for trypsin enzyme in as-received biological samples without sample preparation. The generality of the mechanism is confirmed by using three different protein models. This platform provides a facile, fast and general route for sensitive SERS detection of Raman inactive biomacromolecules, which offers great promising utility for in situ and fast point-of-care practical bioassay.

Design of engineered surfaces for prospective detection of SARS-CoV-2 using quartz crystal microbalance-based techniques

INTRODUCTION

Rapid transmission of the severe acute respiratory syndrome coronavirus 2 has affected the whole world and forced it to a halt (lockdown). A fast and label-free detection method for the novel coronavirus needs to be developed along with the existing enzyme-linked immunosorbent assay (ELISA) and reverse transcription polymerase chain reaction (RT-PCR)-based methods.

AREAS COVERED

In this report, biophysical aspects of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) spike glycoprotein are outlined based on its recent reported electron microscopy structure. Protein binding sites are analyzed theoretically, which consisted of hydrophobic and positive charged amino acid residues. Different strategies to form mixed self-assembled monolayers (SAMs) of hydrophobic (CH₃) and negatively charged (COOH) groups are discussed to be used for the specific and strong interactions with spike protein. Bio-interfacial interactions between the spike protein and device (sensor) surface and its implications toward designing suitable engineered surfaces are summarized.

EXPERT OPINION

Implementation of the engineered surfaces in quartz crystal microbalance (QCM)-based detection techniques for the diagnosis of the novel coronavirus from oral swab samples is highlighted. The proposed strategy can be explored for the label-free and real-time detection with sensitivity up to ng level. These engineered surfaces can be reused after desorption.

Molecularly imprinted polymer integrated plasmonic nanosensor for cocaine detection

A molecularly imprinted polymeric nanofilm was prepared for cocaine detection and applied to plasmonic nanosensor for real-time kinetic, selectivity and reusability analyses. The sensing polymeric surface was fabricated by synthesizing a selective and specific nanofilm on the gold plasmonic nanosensor surface. After characterization experiments with atomic force microscopy, ellipsometer, and contact angle measurements, the kinetic studies of cocaine detection in aqueous solutions in a wide concentration range between 0.2-100 μg/mL were applied to plasmonic nanosensor system at 24 °C with a low limit of detection (0.1 μg/L) and quantification values (0.3 μg/L) and the results showed that this molecularly imprinted polymeric nanofilm integrated plasmonic nanosensor is providing a model for the fastest, most accurate and most precise identification of the cocaine molecule which constitutes a large part of the workload of forensic laboratories.