Non-lytic M13 phage-based highly sensitive impedimetric cytosensor for detection of coliforms

Disposable electrochemical biosensors for the detection of bacteria in the light of antimicrobial resistance

Persistent and inappropriate use of antibiotics is causing rife antimicrobial resistance (AMR) worldwide. Common bacterial infections are thus becoming increasingly difficult to treat without the use of last resort antibiotics. This has necessitated a situation where it is imperative to confirm the infection to be bacterial, before treating it with antimicrobial speculatively. Conventional methods of bacteria detection are either culture based which take anywhere between 24 and 96 hor require sophisticated molecular analysis equipment with libraries and trained operators. These are difficult propositions for resource limited community healthcare setups of developing or less developed countries. Customized, inexpensive, point-of-care (PoC) biosensors are thus being researched and developed for rapid detection of bacterial pathogens. The development and optimization of disposable sensor substrates is the first and crucial step in development of such PoC systems. The substrates should facilitate easy charge transfer, a high surface to volume ratio, be tailorable by the various bio-conjugation chemistries, preserve the integrity of the biorecognition element, yet be inexpensive. Such sensor substrates thus need to be thoroughly investigated. Further, if such systems were made disposable, they would attain immunity to biofouling. This article discusses a few potential disposable electrochemical sensor substrates deployed for detection of bacteria for environmental and healthcare applications. The technologies have significant potential in helping reduce bacterial infections and checking AMR. This could help save lives of people succumbing to bacterial infections, as well as improve the overall quality of lives of people in low- and middle-income countries.

MoO3/MIL-125-NH2 with boosted peroxidase-like activity for electrochemical staphylococcus aureus sensing via specific recognition of bacteriophages

Herein, novel nanozyme mimics MoO3/MIL-125-NH2 were reported and conjugated with bacteriophages as a new electrochemical probe for high sensitivity and specific electrochemical detection of staphylococcus aureus. The excellent peroxidase-like activity of MoO3/MIL-125-NH2 composites was attributed to the integration of MIL-125-NH2 with MoO3, which can boost the generation of superoxide radicals (O• 2-) and thus promote the oxidation of TMB in the presence of H2O2. In this work, two bacteriophages named SapYZU04 and SapYZU10 were isolated from sewage samples by using staphylococcus aureus YZUsa12 as the host. In comparison, MoO3/MIL-125-NH2@SapYZU04 was selected as a recognition agent. The DPV current declined linearly with staphylococcus aureus YZUsa12 concentration in the range of 101-108 CFU mL-1, with a low detection limit of 16 CFU mL-1 (S/N = 3). 20 strains including 13 host strains and 7 non-host strains were used to evaluate the selectivity of the proposed sensor. Regardless of the differences in the degrees of lytic performance for phage SapYZU04, all selected host strains can be screened with merely the same DPV current. Host spectrum-oriented bacteriophage sensing is of great importance for the practical application of bacteriophage-based biosensors in the future.

Genetically engineered bacteriophages as novel nanomaterials: applications beyond antimicrobial agents

Bacteriophages, also known as phages, are viruses that replicate in bacteria and archaea. Phages were initially discovered as antimicrobial agents, and they have been used as therapeutic agents for bacterial infection in a process known as "phage therapy." Recently, phages have been investigated as functional nanomaterials in a variety of areas, as they can function not only as therapeutic agents but also as biosensors and tissue regenerative materials. Phages are nontoxic to humans, and they possess self-assembled nanostructures and functional properties. Additionally, phages can be easily genetically modified to display specific peptides or to screen for functional peptides via phage display. Here, we demonstrated the application of phage nanomaterials in the context of tissue engineering, sensing, and probing.

Electrochemical biosensors for pathogenic microorganisms detection based on recognition elements

The worldwide spread of pathogenic microorganisms poses a significant risk to human health. Electrochemical biosensors have emerged as dependable analytical tools for the point-of-care detection of pathogens and can effectively compensate for the limitations of conventional techniques. Real-time analysis, high throughput, portability, and rapidity make them pioneering tools for on-site detection of pathogens. Herein, this work comprehensively reviews the recent advances in electrochemical biosensors for pathogen detection, focusing on those based on the classification of recognition elements, and summarizes their principles, current challenges, and prospects. This review was conducted by a systematic search of PubMed and Web of Science databases to obtain relevant literature and construct a basic framework. A total of 171 publications were included after online screening and data extraction to obtain information of the research advances in electrochemical biosensors for pathogen detection. According to the findings, the research of electrochemical biosensors in pathogen detection has been increasing yearly in the past 3 years, which has a broad development prospect, but most of the biosensors have performance or economic limitations and are still in the primary stage. Therefore, significant research and funding are required to fuel the rapid development of electrochemical biosensors. The overview comprehensively evaluates the recent advances in different types of electrochemical biosensors utilized in pathogen detection, with a view to providing insights into future research directions in biosensors.

Bacteriophages: Status quo and emerging trends toward one health approach

The alarming rise in antimicrobial resistance (AMR) among the drug-resistant pathogens has been attributed to the ESKAPEE group (Enterococcus faecium, Staphylococcus aureus, Klebsiella pneumoniae, Acinetobacter baumanii, Pseudomonas aeruginosa, Enterobacter sp., and Escherichia coli). Recently, these AMR microbes have become difficult to treat, as they have rendered the existing therapeutics ineffective. Thus, there is an urgent need for effective alternatives to lessen or eliminate the current infections and limit the spread of emerging diseases under the "One Health" framework. Bacteriophages (phages) are naturally occurring biological resources with extraordinary potential for biomedical, agriculture/food safety, environmental protection, and energy production. Specific unique properties of phages, such as their bactericidal activity, host specificity, potency, and biocompatibility, make them desirable candidates in therapeutics. The recent biotechnological advancement has broadened the repertoire of phage applications in nanoscience, material science, physical chemistry, and soft-matter research. Herein, we present a comprehensive review, coupling the substantial aspects of phages with their applicability status and emerging opportunities in several interdependent areas under one health concept. Consolidating the recent state-of-the-art studies that integrate human, animal, plant, and environment health, the following points have been highlighted: (i) The biomedical and pharmacological advantages of phages and their antimicrobial derivatives with particular emphasis on in-vivo and clinical studies. (ii) The remarkable potential of phages to be altered, improved, and applied for drug delivery, biosensors, biomedical imaging, tissue engineering, energy, and catalysis. (iii) Resurgence of phages in biocontrol of plant, food, and animal-borne pathogens. (iv) Commercialization of phage-based products, current challenges, and perspectives.

Unraveling the potential of M13 phages in biomedicine: Advancing drug nanodelivery and gene therapy

M13 phages possessing filamentous phage genomes offer the benefits of selective display of molecular moieties and delivery of therapeutic agent payloads with a tolerable safety profile. M13 phage-displayed technology for resembling antigen portions led to the discovery of mimetic epitopes that applied to antibody-based therapy and could be useful in the design of anticancer vaccines. To date, the excremental experiences have engaged the M13 phage in the development of innovative biosensors for detecting biospecies, biomolecules, and human cells with an acceptable limit of detection. Addressing the emergence of antibiotic-resistant bacteria, M13 phages are potent for packaging the programmed gene editing tools, such as CRISPR/Cas, to target multiple antimicrobial genes. Moreover, their display potential in combination with nanoparticles inspires new approaches for engineering targeted theragnostic platforms targeting multiple cellular biomarkers in vivo. In this review, we present the available data on optimizing the use of bacteriophages with a focus on the to date experiences with M13 phages, either as monoagent or as part of combination regimens in the practices of biosensors, vaccines, bactericidal, modeling of specific antigen epitopes, and phage-guided nanoparticles for drug delivery systems. Despite increasing research interest, a deep understanding of the underlying biological and genetic behaviors of M13 phages is needed to enable the full potential of these bioagents in biomedicine, as discussed here. We also discuss some of the challenges that have thus far limited the development and practical marketing of M13 phages.

Bacteriophage-based biosensors for detection of pathogenic microbes in wastewater

Wastewater is discarded from several sources, including industry, livestock, fertilizer application, and municipal waste. If the disposed of wastewater has not been treated and processed before discharge to the environment, pathogenic microorganisms and toxic chemicals are accumulated in the disposal area and transported into the surface waters. The presence of harmful microbes is responsible for thousands of human deaths related to water-born contamination every year. To be able to take the necessary step and quick action against the possible presence of harmful microorganisms and substances, there is a need to improve the effective speed of identification and treatment of these problems. Biosensors are such devices that can give quantitative information within a short period of time. There have been several biosensors developed to measure certain parameters and microorganisms. The discovered biosensors can be utilized for the detection of axenic and mixed microbial strains from the wastewaters. Biosensors can further be developed for specific conditions and environments with an in-depth understanding of microbial organization and interaction within that community. In this regard, bacteriophage-based biosensors have become a possibility to identify specific live bacteria in an infected environment. This paper has investigated the current scenario of microbial community analysis and biosensor development in identifying the presence of pathogenic microorganisms.

Principles, Methods, and Real-Time Applications of Bacteriophage-Based Pathogen Detection

Bacterial pathogens in water, food, and the environment are spreading diseases around the world. According to a World Health Organization (WHO) report, waterborne pathogens pose the most significant global health risks to living organisms, including humans and animals. Conventional bacterial detection approaches such as colony counting, microscopic analysis, biochemical analysis, and molecular analysis are expensive, time-consuming, less sensitive, and require a pre-enrichment step. However, the bacteriophage-based detection of pathogenic bacteria is a robust approach that utilizes bacteriophages, which are viruses that specifically target and infect bacteria, for rapid and accurate detection of targets. This review shed light on cutting-edge technologies about the novel structure of phages and the immobilization process on the surface of electrodes to detect targeted bacterial cells. Similarly, the purpose of this study was to provide a comprehensive assessment of bacteriophage-based biosensors utilized for pathogen detection, as well as their trends, outcomes, and problems. This review article summaries current phage-based pathogen detection strategies for the development of low-cost lab-on-chip (LOC) and point-of-care (POC) devices using electrochemical and optical methods such as surface-enhanced Raman spectroscopy (SERS).

Advanced Self-Powered Biofuel Cells with Capacitor and Nanogenerator for Biomarker Sensing

Self-powered biofuel cells (BFCs) have evolved for highly sensitive detection of biomarkers such as noncodon micro ribonucleic acids (miRNAs) in the presence of interfering substrates. Self-charging supercapacitive BFCs for in vivo and in vitro cellular microenvironments represent the most prevalent sensing mechanism for diagnosis. Therefore, self-powered biosensing (SPB) with a capacitor and contact separation with a triboelectric nanogenerator (TENG) offers electrochemical and colorimetric dual-mode detection via improved electrical signal intensity. In this review, we discuss three major components: stretchable self-powered BFC design, miRNA sensing, and impedance spectroscopy. A specific focus is given to 1) assembling of sensors for biomarkers, 2) electrical output signal intensification, and 3) role of supercapacitors and nanogenerators in SPBs. We outline the key features of stretchable SPBs and the sequence of miRNA sensing by SPBs. We have emphasized the need of a supercapacitor and nanogenerator for SPBs in the context of advanced assembly of the sensing unit. Finally, we outline the role of impedance spectroscopy in the detection and estimation of biomarkers. We highlight key challenges in SPBs for biomarker sensing, which needs improved sensing accuracy, integration strategies of electrochemical biosensing for in vitro and in vivo microenvironments, and the impact of miRNA sensing on cancer diagnostics. This article attempts a specific focus on the accuracy and limitations of sensing unit for miRNA biomarkers and associated tool for boosting electrical signal intensity for a potential big step further.

Ultrasensitive and Specific Phage@DNAzyme Probe-Triggered Fluorescent Click Chemistry for On-Site Detection of Foodborne Pathogens Using a Smartphone

Rapid, specific, and on-site detection of virulent foodborne pathogenic strains plays a key role in controlling food safety. In this work, an ultrasensitive and specific Phage@DNAzyme signal probe was designed to detect foodborne pathogens. The proposed sensing probe was composed of the selected phage and functionalized DNAzyme, which realized the specific recognition of target foodborne pathogens at the strain level and the efficient catalysis of copper(II) based azide-alkyne cycloaddition (CuAAC) click reaction with fluorescent signal, respectively. As a proof of concept, the virulent Escherichia coli O157:H7 (E. coli O157:H7) as the representative analyte was first enriched and purified from the complex food samples by a 4-mercaptophenylboronic acid-modified gold slide. Following, the Phage@DNAzyme probes were specifically combined with the captured E. coli O157: H7 and catalyzed the click reaction between 3-azido-7-hydroxycoumarin and 3-butyn-1-ol with the assistance of Cu(II) to generate a visual fluorescent signal. Finally, the corresponding fluorescent signals were measured by a smartphone to quantify the target concentrations. Under optimized conditions, the bioassay exhibited a wide linear range from 10² to 10⁸ CFU/mL and the detection limit was 50 CFU/mL (S/N = 3). It was further extended to the detection of another foodborne pathogen Salmonella typhimurium with satisfying sensing performances. This work gives a new path for developing rapid, specific, and on-site detection methods for trace levels of pathogenic strains in foods.

Simultaneous and rapid screening of live and dead E. coli O157:H7 with three signal outputs: An all-in-one biosensor using phage-apoferritin@CuO2 signal tags on MXenes-modified electrode platform

Simultaneous detection of live and dead bacteria is a huge challenge for food safety. To solve this issue, an all-in-one biosensor for bacteria was developed using the phage-apoferritin@CuO₂ (phage-Apo@CP) probe on an antimicrobial peptide (AMP)/MXenes-modified detection platform. With the specific recognition of AMP and phage-Apo@CP, the biosensor for the target Escherichia coli O157:H7 (E. coli O157:H7) presented multi-mode (bioluminescent, colorimetric, and electrochemical) signals to simultaneously measure live and dead bacteria. The bioluminescent signal caused by the adenosine triphosphate (ATP) from the bacteria was used to quantify live bacteria. The colorimetric and voltammetric signals triggered by ·OH and Cu²⁺ from the probe with the assistance of acid could rapidly screen and quantitative determination of total E. coli O157:H7 concentration. Thus, the dead one was obtained according to the total and live ones. All three signals could be mutually corrected to improve the accuracy. The biosensor was successfully used for on-site measurement of live and dead E. coli O157:H7 in food samples with the limit of detection of 30 CFU/mL for live ones and 6 CFU/mL for total bacteria within 50 min. This work presents a novel pathway for rapid and simultaneous quantification of both live and dead bacteria.

Engineered M13 phage as a novel therapeutic bionanomaterial for clinical applications: From tissue regeneration to cancer therapy

Bacteriophages (phages) are nanostructured viruses with highly selective antibacterial properties that have gained attention beyond eliminating bacteria. Specifically, M13 phages are filamentous phages that have recently been studied in various aspects of nanomedicine due to their biological advantages and more compliant engineering capabilities over other phages. Having nanofiber-like morphology, M13 phages can reach varied target sites and self-assemble into multidimensional scaffolds in a relatively safe and stable way. In addition, genetic modification of the coat proteins enables specific display of peptides and antibodies on the phages, allowing for precise and individualized medicine. M13 phages have also been subjected to novel engineering approaches, including phage-based bionanomaterial engineering and phage-directed nanomaterial combinations that enhance the bionanomaterial properties of M13 phages. In view of these features, researchers have been able to utilize M13 phages for therapeutic applications such as drug delivery, biodetection, tissue regeneration, and targeted cancer therapy. In particular, M13 phages have been utilized as a novel bionanomaterial for precisely mimicking natural tissue environment in order to overcome the shortage in tissue and organ donors. Hence, in this review, we address the recent studies and advances of using M13 phages in the field of nanomedicine as therapeutic agents based upon their characteristics as novel bionanomaterial with biomolecules displayed. This paper also emphasizes the novel engineering approach that enhances M13 phage's bionanomaterial capabilities. Current limitations and future approaches are also discussed to provide insight in further progress for M13 phage-based clinical applications.

An ultrasensitive bacterial imprinted electrochemical sensor for the determination of Lactobacillus rhamnosus GG

An ultrasensitive label-free electrochemical sensor based on a homemade imprinted polypyrrole (PPy) polymer film was prepared to achieve quantitative determination of Lactobacillus rhamnosus GG (LGG). The LGG-imprinted polymer (LIP) film was deposited on a portable screen-printed electrode (SPE) via electropolymerization, which constituted an independent integrated system. The main preparation parameters of the LIP sensor were investigated to obtain optimal performance. Under optimized conditions, the peak current response of the LIP sensor showed a linear relationship with the logarithmic value of LGG concentration in the range from 10¹ to 10⁹ CFU mL^-1 and a detection limit of 5 CFU mL^-1. The proposed LIP sensor has achieved efficient, ultrasensitive, highly selective, and cost-effective detection of LGG and can be further developed for practical applications in the quality inspection and development of probiotic products.

Development of a phage-based electrochemical biosensor for detection of Escherichia coli O157: H7 GXEC-N07

Escherichia coli (E. coli) O157:H7 is one of the most important foodborne pathogens that causing severe foodborne diseases. With the development of foodborne diseases, there is an urgent need to seek new methods for early detection and monitoring of E. coli O157:H7. In this study, an electrochemical biosensor using phage EP01 as the recognition agent for detection of E. coli O157:H7 GXEC-N07 was established due to the specificity and high efficiency of phage EP01 in recognizing GXEC-N07. The biosensor was developed by depositing phages conjugated carboxyl graphene oxide (CFGO) and conductive carbon black (CB) onto the surface of glass carbon electrodes (GCEs). When detecting GXEC-N07 in the concentration range of 10² ∼ 10⁷ CFU/mL, the biosensor showed good linearity with a low detection limit of 11.8 CFU/mL, and the whole progress was in less than 30 min. The biosensor was successfully applied to the quantitative detection of GXEC-N07 in fresh milk and raw pork. The recovery values ranged from 60.8 % to 114.2 %. The biosensor provides a rapid, specific, low cost, and label free tool for E. coli O157:H7 GXEC-N07 detection. It is expected to become a powerful method for the detection of bacteria that threatening food safety and public health security.

M13 phage: a versatile building block for a highly specific analysis platform

Viruses are changing the biosensing and biomedicine landscape due to their multivalency, orthogonal reactivities, and responsiveness to genetic modifications. As the most extensively studied phage model for constructing a phage display library, M13 phage has received much research attention as building blocks or viral scaffolds for various applications including isolation/separation, sensing/probing, and in vivo imaging. Through genetic engineering and chemical modification, M13 phages can be functionalized into a multifunctional analysis platform with various functional regions conducting their functionality without mutual disturbance. Its unique filamentous morphology and flexibility also promoted the analytical performance in terms of target affinity and signal amplification. In this review, we mainly focused on the application of M13 phage in the analytical field and the benefit it brings. We also introduced several genetic engineering and chemical modification approaches for endowing M13 with various functionalities, and summarized some representative applications using M13 phages to construct isolation sorbents, biosensors, cell imaging probes, and immunoassays. Finally, current issues and challenges remaining in this field were discussed and future perspectives were also proposed.

Reassessment of Historical Clinical Trials Supports the Effectiveness of Phage Therapy

Phage therapy has become a hot topic in medical research due to the increasing prevalence of antibiotic-resistant bacteria strains. In the treatment of bacterial infections, bacteriophages have several advantages over antibiotics, including strain specificity, lack of serious side effects, and low development costs. However, scientists dismissed the clinical success of early clinical trials in the 1940s, slowing the adoption of this promising antibacterial application in Western countries. The current study used statistical methods commonly used in modern meta-analysis to reevaluate early 20th-century studies and compare them with clinical trials conducted in the last 20 years. Using a random effect model, the development of disease after treatment with or without phages was measured in odds ratios (OR) with 95% confidence intervals (CI). Based on the findings of 17 clinical trials conducted between 1921 and 1940, phage therapy was effective (OR = 0.21, 95% CI = 0.10 to 0.44, P value < 0.0001). The current study includes a topic review on modern clinical trials; four could be analyzed, indicating a noneffective therapy (OR = 2.84, 95% CI = 1.53 to 5.27, P value = 0.0009). The results suggest phage therapy was surprisingly less effective than standard treatments in resolving bacterial infections. However, the results were affected by the small sample set size. This work also contextualizes the development of phage therapy in the early 20th century and highlights the expansion of phage applications in the last few years. In conclusion, the current review shows phage therapy is no longer an underestimated tool in the treatment of bacterial infections.

Properties of a Novel Salmonella Phage L66 and Its Application Based on Electrochemical Sensor-Combined AuNPs to Detect Salmonella

Salmonella is widespread in nature and poses a significant threat to human health and safety. Phage is considered as a new tool for the control of food-borne pathogens. In this study, Salmonella phage L66 (phage L66) was isolated from sewage by using Salmonella Typhimurium ATCC 14028 as the host bacterium, and its basic properties were obtained by biological and bioinformatics analysis. Phage L66 had a broad host spectrum, with an optimal infection complex of 0.1 and an optimal adsorption rate of 90.06%. It also exhibited thermal stability between 30 °C~60 °C and pH stability pH from 3 to 12, and the average lysis amount was 46 PFU/cell. The genome sequence analysis showed that the genome length of phage L66 was 157,675 bp and the average GC content was 46.13%. It was predicted to contain 209 genes, 97 of which were annotated with known functions based on the evolutionary analysis, and phage L66 was attributed to the Kuttervirus genus. Subsequently, an electrochemical sensor using phage L66 as a recognition factor was developed and the working electrode GDE-AuNPs-MPA-Phage L66 was prepared by layer-by-layer assembly for the detection of Salmonella. The slope of the impedance was 0.9985 within the scope from 20 to 2 × 10⁷ CFU/mL of bacterial concentration. The minimum detection limit of the method was 13 CFU/mL, and the average spiked recovery rate was 102.3% with a relative standard deviation of 5.16%. The specificity and stability of this sensor were excellent, and it can be applied for the rapid detection of Salmonella in various foods. It provides a phage-based electrochemical biosensor for the detection of pathogenic bacteria.

Enhancing the Stability of Bacteriophages Using Physical, Chemical, and Nano-Based Approaches: A Review

Phages are efficient in diagnosing, treating, and preventing various diseases, and as sensing elements in biosensors. Phage display alone has gained attention over the past decade, especially in pharmaceuticals. Bacteriophages have also found importance in research aiming to fight viruses and in the consequent formulation of antiviral agents and vaccines. All these applications require control over the stability of virions. Phages are considered resistant to various harsh conditions. However, stability-determining parameters are usually the only additional factors in phage-related applications. Phages face instability and activity loss when preserved for extended periods. Sudden environmental changes, including exposure to UV light, temperature, pH, and salt concentration, also lead to a phage titer fall. This review describes various formulations that impart stability to phage stocks, mainly focusing on polymer-based stabilization, encapsulation, lyophilization, and nano-assisted solutions.

Modification of polyacrylonitrile-derived carbon nanofibers and bacteriophages on screen-printed electrodes: A portable electrochemical biosensor for rapid detection of Escherichia coli

A facile method was developed for fabricating a disposable phage-based electrochemical biosensor for the detection of Escherichia coli. Bare screen-printed electrodes (SPEs) were modified using a two-step drop-casting method, in which polyacrylonitrile-derived electrospun carbon nanofibers (CNFs) were deposited, followed by E. coli bacteriophage immobilization. The deposition of CNFs increased the surface area for bacteriophage immobilization while maintaining a conductive link for ferro/ferricyanide redox transitions. Cyclic voltammetry and electrochemical impedance spectroscopy confirmed that the CNF modification increased the electron-transfer rate, whereas bacteriophages and E. coli blocked electron transfer at the electrode. The biosensor achieved a response within 10 min and a linear response in the E. coli concentration range of 10²-10⁶ CFU/mL. A limit of detection (LOD) of 36 CFU/mL in phosphate-buffered saline was achieved, which is the lowest LOD reported thus far for phage-based disposable SPE sensors. The biosensor exhibited recovery rates between 106 % and 119 % for E. coli detection in apple juice. The proposed fabrication method allowed electrodes to be obtained from different production batches with remarkable consistency and reproducibility, and they remained stable at room temperature for one month. Thus, a phage-based disposable SPE that can be used for bacterial detection was developed for the first time.

The single-tube quantitative rapid detection of coliform bacteria based on enzyme-specific technology

To detect coliform bacteria (CB) with simplicity and portability, a novel, single-tube quantitative rapid detection method was developed based on CB-specific enzymatic technology. This technology involved a simple multi-channel spectrometer which could detect 7 cfu mL-1 CB specifically, and the approach was applied to various food and water samples.

Modern Analytical Techniques for Detection of Bacteria in Surface and Wastewaters

Contamination of surface waters with pathogens as well as all diseases associated with such events are a significant concern worldwide. In recent decades, there has been a growing interest in developing analytical methods with good performance for the detection of this category of contaminants. The most important analytical methods applied for the determination of bacteria in waters are traditional ones (such as bacterial culturing methods, enzyme-linked immunoassay, polymerase chain reaction, and loop-mediated isothermal amplification) and advanced alternative methods (such as spectrometry, chromatography, capillary electrophoresis, surface-enhanced Raman scattering, and magnetic field-assisted and hyphenated techniques). In addition, optical and electrochemical sensors have gained much attention as essential alternatives for the conventional detection of bacteria. The large number of available methods have been materialized by many publications in this field aimed to ensure the control of water quality in water resources. This study represents a critical synthesis of the literature regarding the latest analytical methods covering comparative aspects of pathogen contamination of water resources. All these aspects are presented as representative examples, focusing on two important bacteria with essential implications on the health of the population, namely Pseudomonas aeruginosa and Escherichia coli.

Modern Sensing Approaches for Predicting Toxicological Responses of Food- and Drug-Based Bioactives on Microbiomes of Gut Origin

Recent scientific findings have correlated the gut microbes with homeostasis of human health by delineating their role in pathogen resistance, bioactive metabolization, and immune responses. Foreign materials, like xenobiotics, that induce an altering effect to the human body also influence the gut microbiome to some extent and often limit their use as a result of significant side effects. Investigating the xenobiotic effect of new therapeutic material or edible could be quite painstaking and economically non-viable. Thus, the use of predictive toxicology methods can be an innovative strategy in the food, pharma, and agriculture industries. There are reported in silico, ex vivo, in vitro, and in vivo methods to evaluate such effects but with added drawbacks, such as lower predictability, physiological dissimilarities, and high cost of associated invasive procedures. This review highlights the current and future possibilities with newer modern sensing approaches of economic and time-scale advantages for predicting toxicological responses on gut microbiomes.

Strategies for Surface Immobilization of Whole Bacteriophages: A Review

Bacteriophage immobilization is a key unit operation in emerging biotechnologies, enabling new possibilities for biodetection of pathogenic microbes at low concentration, production of materials with novel antimicrobial properties, and fundamental research on bacteriophages themselves. Wild type bacteriophages exhibit extreme binding specificity for a single species, and often for a particular subspecies, of bacteria. Since their specificity originates in epitope recognition by capsid proteins, which can be altered by chemical or genetic modification, their binding specificity may also be redirected toward arbitrary substrates and/or a variety of analytes in addition to bacteria. The immobilization of bacteriophages on planar and particulate substrates is thus an area of active and increasing scientific interest. This review assembles the knowledge gained so far in the immobilization of whole phage particles, summarizing the main chemistries, and presenting the current state-of-the-art both for an audience well-versed in bioconjugation methods as well as for those who are new to the field.

Label-free chemiresistor biosensor based on reduced graphene oxide and M13 bacteriophage for detection of coliforms

Coliform bacteria are well known as informative indicators for bacterial contamination in water. This study presents a novel chemiresistor biosensor using M13 phage-modified reduced graphene oxide (rGO) for detection of Escherichia coli (E. coli), as coliform bacteria. M13 phage, as a biorecognition element, was immobilized on the rGO channel, so that it can bind to negatively charged E. coli bacteria, allowing the gating effect on the biosensor and the change in its resistance. The prepared materials and device were characterized using spectroscopic, microscopic, and electrical measurements. FTIR and XRD results proved the successful fabrication of GO and rGO nanosheets. AFM results showed that the prepared nanosheets were monolayer. The SEM micrographs of the M13-functionalized devices, soaked in two different concentrations of E. coli, confirmed the successful capturing of E. coli and that the signal change is concentration-dependent. As a result, a linear and specific response towards E. coli was observed and the limit of detection was determined to be 45 CFU/mL. Further, the proposed sensor system showed selectivity towards the tested coliforms. These results suggested this sensing system could be a promising tool for detecting coliforms with an economic, accurate, rapid, and directly applicable process.

Linker-Free Magnetite-Decorated Gold Nanoparticles (Fe3O4-Au): Synthesis, Characterization, and Application for Electrochemical Detection of Arsenic (III)

Linker-free magnetite nanoparticles (Fe3O4NPs)-decorated gold nanoparticles (AuNPs) were grown using a new protocol that can be used as a new platform for synthesis of other intact metal-metal oxide nanocomposites without the need for linkers. This minimizes the distance between the metal and metal oxide nanoparticles and ensures the optimum combined effects between the two material interfaces. X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy confirmed the successful synthesis of the Fe3O4-Au nanocomposite, without any change in the magnetite phase. Characterization, using transmission electron microscopy (TEM), scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) spectroscopy, revealed the composite to consist of AuNPs of 70 ± 10 nm diameter decorated with tiny 10 ± 3 nm diameter Fe3O4NPs in Au:Fe mass ratio of 5:1. The prepared Fe3O4-Au nanocomposite was embedded in ionic liquid (IL) and applied for the modification of glassy carbon electrode (GCE) for the electrochemical detection of As(III) in water. By combining the excellent catalytic properties of the AuNPs with the high adsorption capacity of the tiny Fe3O4NPs towards As(III), as well as the good conductivity of IL, the Fe3O4-Au-IL nanocomposite showed excellent performance in the square wave anodic stripping voltammetry detection of As(III). Under the optimized conditions, a linear range of 1 to 100 μg/L was achieved with a detection limit of 0.22 μg/L (S/N = 3), and no interference from 100-fold higher concentrations of a wide variety of cations and anions found in water. A very low residual standard deviation of 1.16% confirmed the high precision/reproducibility of As(III) analysis and the reliability of the Fe3O4-Au-IL sensing interface. Finally, this proposed sensing interface was successfully applied to analyzing synthetic river and wastewater samples with a 95-101% recovery, demonstrating excellent accuracy, even in complex synthetic river and wastewater samples containing high concentrations of humic acid without any sample pretreatments.

Faradaic electrochemical impedance spectroscopy for enhanced analyte detection in diagnostics

Electrochemical impedance spectroscopy (EIS) is a widely implementable technique that can be applied to many fields, ranging from disease detection to environmental monitoring. EIS as a biosensing tool allows detection of a broad range of target analytes in point-of-care (POC) and continuous applications. The technique is highly suitable for multimarker detection due to its ability to produce specific frequency responses depending on the target analyte and molecular recognition element (MRE) combination. EIS biosensor development has shown promising results for the medical industry in terms of diagnosis and prognosis for various biomarkers. EIS sensors offer a cost-efficient system and rapid detection times using minimal amounts of sample volumes, while simultaneously not disturbing the sample being studied due to low amplitude perturbations. These properties make the technique highly sensitive and specific. This paper presents a review of EIS biosensing advancements and introduces different detection techniques and MREs. Additionally, EIS's underlying theory and potential surface modification techniques are presented to further demonstrate the technique's ability to produce stable, specific, and sensitive biosensors.

Nano-enabled sensing approaches for pathogenic bacterial detection

Infectious diseases caused by pathogenic bacteria, especially antibiotic-resistant bacteria, are one of the biggest threats to global health. To date, bacterial contamination is detected using conventional culturing techniques, which are highly dependent on expert users, limited by the processing time and on-site availability. Hence, real-time and continuous monitoring of pathogen levels is required to obtain valuable information that could assist health agencies in guiding prevention and containment of pathogen-related outbreaks. Nanotechnology-based smart sensors are opening new avenues for early and rapid detection of such pathogens at the patient's point-of-care. Nanomaterials can play an essential role in bacterial sensing owing to their unique optical, magnetic, and electrical properties. Carbon nanoparticles, metallic nanoparticles, metal oxide nanoparticles, and various types of nanocomposites are examples of smart nanomaterials that have drawn intense attention in the field of microbial detection. These approaches, together with the advent of modern technologies and coupled with machine learning and wireless communication, represent the future trend in the diagnosis of infectious diseases. This review provides an overview of the recent advancements in the successful harnessing of different nanoparticles for bacterial detection. In the beginning, we have introduced the fundamental concepts and mechanisms behind the design and strategies of the nanoparticles-based diagnostic platform. Representative research efforts are highlighted for in vitro and in vivo detection of bacteria. A comprehensive discussion is then presented to cover the most commonly adopted techniques for bacterial identification, including some seminal studies to detect bacteria at the single-cell level. Finally, we discuss the current challenges and a prospective outlook on the field, together with the recommended solutions.

Application of Bacteriophages in Nanotechnology

Bacteriophages (phages for short) are viruses, which have bacteria as hosts. The single phage body virion, is a colloidal particle, often possessing a dipole moment. As such, phages were used as perfectly monodisperse systems to study various physicochemical phenomena (e.g., transport or sedimentation in complex fluids), or in the material science (e.g., as scaffolds). Nevertheless, phages also execute the life cycle to multiply and produce progeny virions. Upon completion of the life cycle of phages, the host cells are usually destroyed. Natural abilities to bind to and kill bacteria were a starting point for utilizing phages in phage therapies (i.e., medical treatments that use phages to fight bacterial infections) and for bacteria detection. Numerous applications of phages became possible thanks to phage display-a method connecting the phenotype and genotype, which allows for selecting specific peptides or proteins with affinity to a given target. Here, we review the application of bacteriophages in nanoscience, emphasizing bio-related applications, material science, soft matter research, and physical chemistry.

Electrochemical Immuno- and Aptamer-Based Assays for Bacteria: Pros and Cons over Traditional Detection Schemes

Microbiological safety of the human environment and health needs advanced monitoring tools both for the specific detection of bacteria in complex biological matrices, often in the presence of excessive amounts of other bacterial species, and for bacteria quantification at a single cell level. Here, we discuss the existing electrochemical approaches for bacterial analysis that are based on the biospecific recognition of whole bacterial cells. Perspectives of such assays applications as emergency-use biosensors for quick analysis of trace levels of bacteria by minimally trained personnel are argued.

Cellulase-Linked Immunomagnetic Microbial Assay on Electrodes: Specific and Sensitive Detection of a Single Bacterial Cell

Pathogen-associated infections represent one of the major threats to human health and require reliable methods for immediate and robust identification of pathogenic microorganisms. Here, an inexpensive cellulase-linked immunomagnetic methodology was developed for the specific and ultrasensitive analysis of bacteria at their single-cell levels within a 3 h procedure. Detection of a model bacterium, Escherichia coli, was performed in a sandwich reaction with E. coli-specific either aptamer or antibody (Ab)-modified magnetic beads (MBs) and Ab/aptamer reporter molecules linked to cellulase. The cellulase-labeled immuno-aptamer sandwich applied onto nitrocellulose-film-modified electrodes digested the film and changed its electrical conductivity. Electrode's chronocoulometric responses at 0.3 V, in the absence of any redox indicators, allowed a single E. coli cell detection and from 1 to 4 × 10⁴ CFU mL^-1 E. coli quantification. No interference/cross-reactivity from Salmonella enteritidis, Enterobacter agglomerans, Pseudomonas putida, Staphylococcus aureus, and Bacillus subtilis was observed when the assay was performed on Ab-modified MBs, and E. coli could be quantified in tap water and milk. This electrochemically label-free methodology is sufficiently fast, highly specific, and sensitive to be used in direct in-field applications. The assay can be adapted for specific detection of other bacterial strains of either the same or different species and offers new analytical tools for fast, specific, and reliable analysis of bacteria in the clinic, food, and environment.

Facile preparation of novel Pd nanowire networks on a polyaniline hydrogel for sensitive determination of glucose

In this study, novel Pd nanowire networks (PdNW) grown on three-dimensional polyaniline hydrogel (3D-PANI) were prepared via a facile one-step electrodeposition approach at a constant potential of - 0.2 V and further utilized as an electrochemical sensing material for sensitive determination of glucose in alkaline medium. Compared with the sensor based on Pd nanofilm (PdNF)/3D-PANI prepared by electrodeposition at - 0.9 V, the sensor based on PdNW/3D-PANI presented substantially enhanced electrocatalytic activity towards glucose oxidation, with an excellent sensitivity of 146.6 μA mM^-1 cm^-2, a linear range from 5.0 to 9800 μM, and a low detection limit of 0.7 μM and was, therefore, demonstrated to be available for the determination of glucose in human serum. These findings are likely attributed to the combination of advantages of both PdNW and 3D-PANI, which outperformed most other Pd-based non-enzymatic glucose sensors reported earlier. Moreover, this non-enzymatic electrochemical sensor based on PdNW/3D-PANI may serve as an alternative tool for the assay of glucose and possibly other biomolecules. Graphical abstract.

Recent Progress in the Detection of Bacteria Using Bacteriophages: A Review

Bacteria will likely become our most significant enemies of the 21st century, as we are approaching a post-antibiotic era. Bacteriophages, viruses that infect bacteria, allow us to fight infections caused by drug-resistant bacteria and create specific, cheap, and stable sensors for bacteria detection. Here, we summarize the recent developments in the field of phage-based methods for bacteria detection. We focus on works published after mid-2017. We underline the need for further advancements, especially related to lowering the detection (below 1 CFU/mL; CFU stands for colony forming units) and shortening the time of analysis (below one hour). From the application point of view, portable, cheap, and fast devices are needed, even at the expense of sensitivity.

A one-step potentiometric immunoassay for plasma cardiac troponin I using an antibody-functionalized bis-MPA-COOH dendrimer as a competitor with improved sensitivity

Herein, we have reported a new one-step potentiometric immunoassay for the sensitive and specific detection of human plasma cardiac troponin I (cTnI), a biomarker of cardio-cerebrovascular diseases. Initially, the cTnI biomolecules were immobilized on the surface of a gold nanoparticle-functionalized screen-printed graphite electrode (SPGE). Thereafter, rabbit polyclonal antibodies to cTnI were covalently conjugated to the bis-MPA-COOH dendrimers through typical carbodiimide coupling. The introduction of the target analyte caused a competitive immunoreaction between the immobilized cTnI on the electrode and the conjugated antibody on the dendrimers. The potentiometric measurement was mainly derived from the change in the surface charge on the surface of the modified electrode due to the negatively charged bis-MPA-COOH dendrimers after the immunoreaction. On increasing target cTcI, the number of charged dendrimers on the immunosensor decreased, resulting in a change in the electric potential. Under optimum conditions, the potentiometric immunosensor exhibited good potentiometric responses for the detection of cTcI and allowed the determination of the target analyte at a concentration as low as 7.3 pg mL-1. An intermediate precision of ≤8.7% was accomplished with batch-to-batch identification. Meanwhile, the potentiometric immunosensor showed good anti-interfering capacity and selectivity against other proteins and biomarkers. Importantly, our system displayed high accuracy for the analysis of human plasma serum samples containing target cTcI relative to commercial human cTcI enzyme-linked immunosorbent assay (ELISA) kits.